1080

SHD118422
SHD118422PA
SHD118422PB
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1080, REV. A
HERMETIC POWER SCHOTTKY RECTIFIER
175 C Maximum Operation Temperature
DESCRIPTION: A 45 VOLT, 60 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD5/5A/5B PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
45
Volts
IO
60
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t=8.3ms, Sine Wave) (per leg)
IFSM
570
Amps
MAXIMUM JUNCTION CAPACITANCE (Vr =5V)
CT
1600
pF
0.7
C/W
Top/Tstg
-65 to
+ 175
C
SYMBOL
MAX.
UNITS
Vf
0.64
Volts
Ir
0.8
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C)
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
R
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps) (per leg)
TJ = 25 C
TJ = 125 C
0.57
MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) (per leg)
TJ = 25 C
TJ = 125 C
mA
30
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD118422
SHD118422PA
SHD118422PB
SENSITRON
DATA SHEET 1080, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.370±.010
(9.40±.254)
.520±.020
(13.2±.508)
.510±.020
(12.9±.508)
.370±.010
(9.40±.254)
.370±.010
(9.40±.254)
2
.125±.010
(3.17±.254)
.030±.010
(.762±.254)
.090±.010
(2.29±.254)
2
2
.610±.010
(15.5±.254)
.030±.010
(.762±.254)
.030±.010
(.762±.254)
3
.320±.010
(8.13±.254)
.610±.010
(15.5±.254)
.110 (2.80) Max
.320±.010
(8.13 ±.254)
.610±.010
(15.5±.254)
3
3
Alumina Ring
Terminal 1
.110 (2.79) Max
Moly Lid
.020±.005 R
(.508±.127 )
Copper Terminals
.130 (3.30) Max
Moly Lid
Alumina Ring
.020±.005 R
(.508±.127 )
Alumina Ring
.020±.002
(.508±.051)
Moly Base
Terminal 1
Moly Base
Terminal 1
.060±.010
(1.52±.254)
SHD-5A
PINOUT TABLE
DEVICE TYPE
DUAL RECTIFIER, COMMON CATHODE (P)
.015±.002
(.381±.051)
.060±.010
(1.52±.254)
SHD-5B
PIN 1
COMMON CATHODE
Typical Forward Characteristics
PIN 2
ANODE
PIN 3
ANODE
Typical Reverse Characteristics
103
102
Instantaneous Reverse Current - I R (mA)
175 °C
125 °C
150 °C
125 °C
101
100 °C
100
75 °C
10-1
50 °C
25 °C
10-2
10-3
1
10
0
0.2
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop -FV(V)
10
20
30
Reverse Voltage - RV (V)
40
50
Typical Junction Capacitance
25 °C
0.8
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
175 °C
102
1600
1400
1200
1000
800
600
400
200
0
10
20
30
Reverse Voltage - RV (V)
40
50
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD118422
SHD118422PA
SHD118422PB
SENSITRON
DATA SHEET 1080, REV. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
Similar pages