Industrial Safety Solutions

Proper Power and Grounding
connections installed with high-quality
products and tools are critical
to ensure operator safety,
equipment performance
and system reliability.
We’ve Got You Covered
Partner with Panduit for a full solution of over 30,000 available parts engineered to
reduce installation time and costs, improve operational performance, and meet or
exceed industry standards. Gain access to programs that provide resources, tools
and training so you can drive your business forward.
www.panduit.com/buildnow
TABLE OF CONTENTS
.....................................................................................................
Safety Signs & Labels
Haz-Com / GHS
Pages 2 – 34
Pages 70 – 73
Safety Tags
Traffic Signs
Pages 35 – 43
Pages 74 – 79
Cable Ties & Wire Markers
Floor Signs & Tapes
Pages 44 – 49
Pages 80 – 86
Labelmakers
Barriers & Barricades
Pages 50 – 52
Pages 87 – 93
ID Tags & Pipe Markers
Motivation
Pages 53 – 58
Lockout / Tagout
Pages 59 – 69
Page 94
Index
Pages 95 – 96
2
10 Practical Solutions
10
PRACTICAL SOLUTIONS
FOR OSHA’S TOP 10
SAFETY VIOLATIONS
Top 10 most frequently cited standards by Federal OSHA in fiscal year 2015
(October 1, 2014 through September 30, 2015).
............................................................................................................
Keep fall protection readily available to help
protect workers.
Safety Signs – Page 25
.................................................... ..................................................
1
Fall Protection
2
Hazard Communication
Comply with Haz-Com requirements and
GHS provisions.
Haz-Com – Page 71
............................................................................................................
3
Scaffolding
Increase jobsite safety with simple safety notifications.
Safety Tags – Page 38, 40
4
Respiratory Protection
Prevent entry into areas where dangerous gases
may be present.
Free Standing Signs – Page 89
10 Practical Solutions
800.777.3300 | Panduit.com
Lockout/Tagout – Page 59-69
6
............................................
When in doubt, lock out equipment. Protect workers
from accidental start-up.
............................................ .............................................
5
Lockout/Tagout
10
3
Powered Industrial Trucks
Help avoid accidents in and around forklifts.
Floor Signs – Page 86
Hard Hat Labels – Page 26
............................................................................................................
7
Ladders
Raise awareness about ladder and stairway safety to
prevent accidents.
Safety Signs – Page 23
8
Electrical – Wiring Methods
Be aware of dangers associated with
electrical hazards.
Cable Ties – Page 46
Wire Markers – Page 49
............................................................................................................
9
Machine Guarding
Post warning signs and labels to warn employees of
potential machine guarding hazards.
Safety Signs – Page 19
Electrical –
General Requirements
Proper identification can lead to a more safe
and compliant workplace.
Safety Signs – Page 15
Voltage Markers – Page 17
4
Introduction to Safety Signs & Labels
Stock Safety Signs & Labels
Our stock signs and labels are ready-to-ship … today. Safely made in the USA!
ANSI STYLE
t
OSHA STYLE
t
ANSI ISO
t
DANGER
RED
WARNING
ORANGE
CAUTION
YELLOW
NOTICE
BLUE
SAFETY FIRST
GREEN
Indicates a hazardous situation
that, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
that, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
that, if not avoided, could result
in minor or moderate injury.
Indicates information considered
important but not hazard-related.
Indicates specific safety-related
instructions or procedures that
are related to safe work practices.
OSHA
OSHA
OSHA
OSHA
OSHA
ANSI
ANSI
ANSI
ANSI
ANSI
OSHA 29 CFR § 1910.145
ANSI Z535
Traditional OSHA-style signs and labels are the
most widely recognized design format in industry.
They use upper case lettering, and the message
is generally centered underneath the header. This
standardized sign format continues today to be the
choice for selecting messages in safety signs.
Newer ANSI-style signs and labels are gaining in
popularity and are recognized by OSHA as an acceptable
safety notification device. Signs often include a visual
alert symbol (triangle with an exclamation point!), a
large symbol, and left-justified upper and lower case
message lettering. These signs are clearly visible and
provide concise safety alert messages.
Stock Sign Materials
800.777.3300 | Panduit.com
Choose the Right Stock Material
Your facility signs are used indoors and outdoors, in ordinary conditions or extreme.
We offer materials to match your needs. Select a material based upon your application
requirements to ensure your message is conveyed clearly and effectively.
Every sign we make is American-made and skillfully crafted with quality in mind. Our stock signs are
available in a variety of materials and printed with technologically advanced inks. With many materials
featuring no-hassle extended guarantees, your printed sign will continue to notify and alert employees for
years. For additional information, please give us a call.
Adhesive
Vinyl (PVS)
Peel-off liner
Printed Message
Stick with Adhesive Vinyl for light-duty
applications. The ideal choice for a
variety of indoor, and sheltered outdoor,
marking needs. Easily mounts to all
curved areas such as pipes, poles and
secondary containers.
Material Features
• 0.004" thick printed matte surface
• Permanent acrylic adhesive
0.004" Vinyl
• Moisture-resistant
• Service temperature range: -20° to 176°F
• Square corners and scored backing for quick peel-off and application
• Durability: 2 years outdoors
Applications
• Adheres to most surfaces
• Indoor usage
• Light-duty application
• Sheltered outdoor locations
Polyester
Laminated Vinyl
(PLVS)
Along with looking great, your sign should last as long
as it’s needed. The material depends on where your
sign is going to be displayed. For indoor, choose
light-duty materials; for harsh environments and
long-term/extended outdoor exposure, choose from
our selection of durable materials listed below.
Polyethylene
Plastic (PRS)
Printed Message
Appropriate for everyday medium-duty
marking needs. Semi-flexible, economical
design with 50% recycled content is
ideal for indoor and sheltered
outdoor environments.
Material Features
• 0.055" thick with good impact resistance
and surface image with non-glare finish
• Manufactured with 50% recycled plastic
and is recyclable
• Ideal for flat surfaces, with enough flex
to mount on slightly curved areas
• Contains UV inhibitors
• Service temperature range: -90° to 168°F
• Rounded corners and 0.1875" mounting holes
• Durability: 2 years outdoors
0.055" Thick Polyethylene
MADE FROM
50%
RECYCLED
MATERIAL
L
Applications
• Indoor usage
• Medium-duty marking needs
• Sheltered outdoor locations
• Ideal for low-cost informational usage
Peel-Off Liner
Dual-layered Polyester Laminated
Vinyl delivers exceptional flexibility
and performance. Durability, even
in the toughest indoor and
outdoor conditions.
Material Features
• 0.006" thick poly-composite
with UV protective coating
0.006" Vinyl
• Sub-surface image is protected
by high-gloss polyester film from
water, chemicals and abrasion
• Permanent acrylic adhesive backing
• Service temperature range: -20° to 176°F
• Round corners without holes; scored backing for
quick peel-off and application
• Durability: 5 years outdoors
Applications
• Indoor and outdoor usage
• Adheres to most surfaces
• Excellent in harsh environments
What is my sign printed
on and will it last?
Printed Message
Protective Coating
Aluminum (PAS)
Printed Message
Get the strength of metal,
without the rust. Aluminum has
superior abrasion and chemical
resistance for indoor and
outdoor environments.
Material Features
• Printed image on rigid 0.040"
aluminum sheet
• UV protective coating
• Service temperature range:
-40° to 250°F
Protective Coating
• Withstands splashes
and washdowns
0.040" Thick Aluminum
• Endures outdoor
environmental conditions
• Rounded corners and 0.1875" mounting holes on most sizes,
will be adjusted for larger sizes
• Durability: 5 years outdoors
Applications
• Indoor and outdoor usage
• Excellent for harsh environments
• Ideal for longer-term marking needs
5
Safety Signs & Labels 6
Admittance & Exit
Signs
7" x 10"
10" x 14"
D7001
7" x 10"
10" x 14"
D7002
7" x 10"
10" x 14"
D7003
7" x 10"
10" x 14"
D7013
14" x 10"
D4007
7" x 10"
10" x 14"
D7016
7" x 10"
10" x 14"
D7017
14" x 10"
D4140
7" x 10"
10" x 14"
D7018
14" x 10"
D5142
7" x 10"
10" x 14"
D7019
14" x 10"
D4147
7" x 10"
10" x 14"
D7020
7" x 10"
10" x 14"
D7034
7" x 10"
10" x 14"
D7035
7" x 10"
10" x 14"
D7004
7" x 10"
10" x 14"
W7014
14" x 10"
D4077
7" x 10"
10" x 14"
W7021
7" x 10"
10" x 14"
W7036
7" x 10"
10" x 14"
W7005
7" x 10"
10" x 14"
C7007
7" x 10"
10" x 14"
C7015
7" x 10"
10" x 14"
C7061
7" x 10"
10" x 14"
C7062
7" x 10"
10" x 14"
C7063
7" x 10"
10" x 14"
N7057
7" x 10"
10" x 14"
N7043
7" x 10"
10" x 14"
N7008
7" x 10"
10" x 14"
N7009
7" x 10"
10" x 14"
N7010
7" x 10"
10" x 14"
N7064
7" x 10"
10" x 14"
N7065
7" x 10"
10" x 14"
N7044
7" x 10"
10" x 14"
N7045
7" x 10"
10" x 14"
N7047
7" x 10"
10" x 14"
N7066
7" x 10"
10" x 14"
N7051
7" x 10"
10" x 14"
N7067
14" x 10"
N4802
7" x 10"
10" x 14"
N7046
14" x 10"
N4826
See How to Order Signs on next page
Safety Signs & Labels
800.777.3300 | Panduit.com
7" x 10"
10" x 14"
N7048
7" x 10"
10" x 14"
N7058
7" x 10"
10" x 14"
N7049
7" x 10"
10" x 14"
N7022
7" x 10"
10" x 14"
N7068
7" x 10"
10" x 14"
N7037
7" x 10"
10" x 14"
N7070
7" x 10"
10" x 14"
N7071
7" x 10"
10" x 14"
N7054
7" x 10"
10" x 14"
N7072
7" x 10"
10" x 14"
N7073
7" x 10"
10" x 14"
N7056
7" x 10"
10" x 14"
B7028
14" x 10"
N5813
7" x 10"
10" x 14"
N7069
7" x 10"
10" x 14"
N7011
7" x 10"
10" x 14"
N7052
7" x 10"
10" x 14"
N7053
7" x 10"
10" x 14"
N7023
14" x 10"
N4813
7" x 10"
10" x 14"
N7059
7" x 10"
10" x 14"
N7074
7" x 10"
10" x 14"
N7055
14" x 10"
N4811
PROPIEDAD
PRIVADA
10" x 7"
14" x 10"
B7031
7" x 10"
10" x 14"
B7040
7" x 10"
10" x 14"
B7029
7" x 10"
10" x 14"
B7030
7" x 10"
10" x 14"
B7032
7" x 10"
10" x 14"
B7033
7" x 10"
10" x 14"
B7042
7" x 10"
10" x 14"
B7012
7" x 10"
10" x 14"
B7075
14" x 10"
B4511
7" x 10"
10" x 14"
B7041
14" x 10"
B4520
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
Available Sizes
7" x 10"
10" x 14"
14" x 10"
Codes
0710
1014
1410
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
D7018
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710D7018
7
Safety Signs & Labels 8
Signs
7" x 10"
10" x 14"
B7078
7" x 10"
10" x 14"
B7077
10" x 14"
B3533
10" x 14"
B4535
10" x 14"
B4907
14" x 10"
B4908
7" x 10"
10" x 14"
B7076
7" x 10"
10" x 14"
B7081
7" x 10"
10" x 14"
B7024
7" x 10"
10" x 14"
B7025
7" x 10"
10" x 14"
B7080
7" x 10"
10" x 14"
B7026
7" x 10"
10" x 14"
B7027
7" x 10"
10" x 14"
B7039
7" x 10"
10" x 14"
B7038
14" x 10"
B3513
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
Available Sizes
7" x 10"
10" x 14"
10" x 14"
B4912
7" x 10"
10" x 14"
B7079
Codes
0710
1014
How to Order Signs:
7" x 10"
10" x 14"
B7050
7" x 10"
10" x 14"
B7082
1

Select Material
Code: PVS
2

Lighted UL LED Exit Signs
Select Size
Code: 0710
3

Select Label Sign
Part Number: B7078
4

Combine Codes in Specific Order for
Complete Part Number: PVS0710B7078
Self-Luminous UL Exit Signs
Light the way of egress routes with illuminated EXIT.
•Long-life, energy efficient, LED lamps, rated at 25+ years
•Ceiling, end, or surface mount
•Emergency style includes rechargeable battery back-up to keep
sign lit for 1 1/2 hours during power failure
•Red, 6" letters with knock-out left and right arrows
•Hardwire connection to reliable electrical source required
•120 or 277 field selectable inputs
Meets OSHA 29
CFR §1910.37
Complies with OSHA
29 CFR §1910.37,
NFPA Life Safety
Code 7.10.4, and
NFPA 7.10.7.1
Thermoplastic Exit Signs
•Scratch- and corrosion-resistant plastic housing
•Measures 7 1/2" x 12 1/4" x 1 3/4"
•UL924 listed
Part No.
Description
UOM
PSSE001
Standard
Each
PSSE002
Emergency
Each
Steel Exit Signs
•Durable, 20-gauge, steel housing with white
powder-coat finish
•Measures 7 1/2" 12" x 2 1/4"
•UL924 and ULC/ORD-C924-02 listed
Exit signs stay continuously lit without external power.
•Illuminated by tritium gas-filled, hermetically-sealed glass tubes
•Consumes no energy, maintenance free
•6" H letters, red polycarbonate faceplate, removable directional arrows
•Injection molded, black, ABS plastic frame
•Highly durable, vibration- and waterproof
•Listed to UL924
•Meets codes: NFPA Life Safety Code 101, BOCA and ICBO
•Measures 14 3/16" x 9 5/8" x 1 1/2"
•Hardware included for ceiling, end, or surface mount
Part No.
Description
UOM
Part No.
Life Span
UOM
PSSE003
Standard
Each
PSSE005
10 Years
Each
PSSE004
Emergency
Each
PSSE006
20 Years
Each
Safety Signs & Labels
800.777.3300 | Panduit.com
Glow-in-the-Dark UL Exit Signs
The Next Generation in Technology
UL Glow Exit Signs store energy from virtually any artificial
light source. When properly charged, UL Glow Signs will
glow for over six hours in the event of a blackout. Low-profile,
non-radioactive signs can be used for both high-level and
low-level applications, and require no electrical hook-up.
• Recyclable
• Energy-saving
• Easy to install
• Maintenance free, 25+ year life
Blackout
Normal lighting
Meets The Following Standards:
• ICC ES report #ER-6040
• California State Fire Marshal listing #6200-1617; 100
• City of Los Angeles Research Report: RR 25531 (CSI #16530)
• Ontario Building Materials Evaluation Commission
• Authorization Report BMEC # 03-12-291
• Meets NFPA Life Safety Code 101
and OSHA requirements
• Meets current Building Codes: IBC, ICBO, BOCA
and SBCCI, NFPA 5000
Standard Letters
Reflective Letters
Steel Case Style
Plastic Case Style
• 50-ft. viewing distance
• Glow-in-the-dark letters on your choice
of three background colors
• Photoluminescent panel is housed inside
a durable steel casing
• “Punch-out” directional arrows included
• Surface, flag, or ceiling mount
• Sign size: 8 1/4"H x 15 1/4"W x 1/4"D
• Letter size: 7"H x 7/8" stroke
•50-ft. viewing distance
•Choose glow-in-the-dark letters on your
choice of three background colors
•Photoluminescent panel is housed inside
a durable plastic casing
•“Punch-out” directional arrows included
•Surface, flag, or ceiling mount
•Mounting hardware included
•Sign size: 8 3/4"H x 15 3/8"W x 3/4"D
•Letter size: 7"H x 7/8" stroke
One-Dimensional
Plate Style
•50-ft. viewing distance
•Colored letters on glow-in-the-dark background with
optional black plastic frame
•Choose standard or high visibility, reflective lettering
in your choice of two colors
•Durable, impact-resistant plastic with 4 corner
mounting holes
•“Punch-out” directional arrows included
•Wall mount only
•Sign size: 7 1/2"H x 13"W
•Letter size: 6"H x 13/16" stroke
When ordering, specify case color:
Red – RD, Green – GN, or Black – BK.
Part No.
Description
UOM
PSSE007
Single-face
Each
PSSE010
Single-face
w/mounting brackets
Each
Double-face
w/mounting brackets
Each
PSSE013
When ordering, specify case color:
Red – RD, Green – GN, or Black – BK.
When ordering, specify letter color:
Red – RD, or Green – GN.
Part No.
Description
UOM
Part No.
Description
UOM
PSSE020
Single-face
Each
PSSE016
Standard Letters
Each
PSSE023
Double-face
Each
PSSE018
Reflective Letters
Each
9
Safety Signs & Labels 10
Chemicals & Hazardous Materials
Signs
7" x 10"
10" x 14"
D7083
7" x 10"
10" x 14"
D7084
7" x 10"
10" x 14"
D7085
7" x 10"
10" x 14"
D7086
7" x 10"
10" x 14"
D7087
7" x 10"
10" x 14"
D7088
7" x 10"
10" x 14"
D7101
7" x 10"
10" x 14"
D7089
7" x 10"
10" x 14"
D7104
7" x 10"
10" x 14"
D7105
7" x 10"
10" x 14"
D7106
7" x 10"
10" x 14"
D7107
7" x 10"
10" x 14"
D7090
7" x 10"
10" x 14"
D7091
7" x 10"
10" x 14"
D7092
7" x 10"
10" x 14"
D7093
7" x 10"
10" x 14"
D7094
7" x 10"
10" x 14"
D7095
7" x 10"
10" x 14"
D7096
7" x 10"
10" x 14"
D7097
7" x 10"
10" x 14"
D7108
7" x 10"
10" x 14"
D7098
7" x 10"
10" x 14"
C7099
7" x 10"
10" x 14"
N7102
7" x 10"
10" x 14"
B7100
SAFETY DATA
7" x 10"
10" x 14"
N7103
7" x 10"
10" x 14"
N7109
14" x 10"
B4524
14" x 10"
B4518
See How to Order Signs on next page
Labels
3 1/2" x 5"
D3026
3 1/2" x 5"
D3029
3 1/2" x 5"
D3296
3 1/2" x 5"
D3304
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
How to Order Labels:
3 1/2" x 5"
C3686
3 1/2" x 5"
B3517
3 1/2" x 5"
B3548
3

Select Label Base
Part Number: D3304
Codes
PVS
PLVS
1

4

Available Size
3 1/2" x 5"
Select Material Code:
PVS
2

Codes
0305
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305D3304
Safety Signs & Labels
800.777.3300 | Panduit.com
11
Labels – Polyester Laminated Vinyl (PLVS)
2" x 9"
B3502
2" x 9"
B3516
2" x 5"
B3542
2" x 9"
B3587
1" x 9"
B3534
2" x 5"
B3500
Available Material
Polyester Laminated Vinyl (Each)
1" x 6"
B3501
How to Order Labels:
2" x 5"
B3556
3

Select Label Base
Part Number: B3542
Code
PLVS
1

4

Available Sizes
1" x 6"
1" x 9"
2" x 5"
2" x 9"
Select Material Code:
PLVS
2

Codes
0106
0109
0205
0209
Select Size Code:
0205
Combine Codes in Specific Order
for Complete Part Number: PLVS0205B3542
Confined Space
Signs
7" x 10"
10" x 14"
D7110
7" x 10"
10" x 14"
D7111
7" x 10"
10" x 14"
D7112
14" x 10"
D4003
7" x 10"
10" x 14"
D7115
14" x 10"
D4231
7" x 10"
10" x 14"
D7113
7" x 10"
10" x 14"
D7114
7" x 10"
10" x 14"
D7116
14" x 10"
D4135
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
Available Sizes
7" x 10"
10" x 14"
14" x 10"
Codes
0710
1014
1410
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
D7084
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710D7084
Labels
3 1/2" x 5"
D3277
3 1/2" x 5"
D3251
3 1/2" x 5"
D3253
6" x 6"
D3034
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
How to Order Labels:
3

3 1/2" x 5"
D3291
3 1/2" x 5"
D3279
3 1/2" x 5"
D3285
3 1/2" x 5"
D3275
Select Label Base
Part Number: D3277
Codes
PVS
PLVS
1

4

Available Sizes
3 1/2" x 5"
6" x 6"
Select Material Code:
PVS
2

Codes
0305
0606
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305D3277
12
Safety Signs & Labels Cross Barrier
Cross out open entryway to a Confined Space.
•Crossbuck design fits onto bolt pattern of vertical confined space entry
•Attention-getting diagonal red-white stripes are surface-printed and protected
by laminate film
•Adjustable crossbuck pivots flat for easy transport and storage
•Crossbuck arms measure 6" x 42" with 1.5" x 9" slotted cutouts at each end
•11.5" x 11.5" octagonal sign is printed on 0.055" polyethylene plastic
•Fits 22" to 38" outside bolt-to-bolt*
•Crossbucks available in two materials:
- Standard style is 0.060" polycarbonate plastic – durable to withstand initial impacts
and scratches
- Heavy-Duty style is 0.118" Poly-Aluminum – combines aluminum and thermoplastic
core for high strength and impact protection
* To verify proper fit of the Barrier for your entryway, measure the length across the entryway
from bolt to bolt; then measure the bolt diameter and compare to slot width.
Description
Material
UOM
Standard
Plastic
Each
Heavy-Duty
Poly-Aluminum
Each
Plastic
Poly-Aluminum
PCSP0006
PCSP0009
Plastic
Poly-Aluminum
PCSP0008
PCSP0011
Permit Holder Board
Plastic
Poly-Aluminum
PCSP0007
PCSP0010
Plastic
Poly-Aluminum
PCSP0012
PCSP0013
Entry Permit Pad
• Easy to write on, 8.5" x 11" sheets
• Conveniently packaged in easy to
tear off pads
• 100 sheets
Part No.
UOM
per pad
PCSP0002
100 Sheets/Pad
Comply with OSHA 29 CFR
§ 1910.146(e)(1)
Stencils
Mark confined spaces that are otherwise difficult to label
by using ink or paint stencils.
•0.010" thermo-plastic stencils
•Fits a 7" x 10" image area
•Header line has approx. 2" H letters
•Message area has 1" H letters
Board communicates Confined Space requirements and
holds related permits.
•Hang or set board near or at entrance of confined space to be readily
seen by all
•Features large sign legend with clear acrylic pocket
•Holds 8.5" x 11" entry permit sheets (available separately)
•Constructed of durable 0.125" thick PVC
Part No.
•Measures 12"H x 19"W with mounting holes
PCSP0001
•Not recommended for outdoor use
UOM
Each
UOM
Each
7" x 10"
PCSP0003
7" x 10"
PCSP0004
7" x 10"
PCSP0005
Safety Signs & Labels
800.777.3300 | Panduit.com
13
Construction
Signs
CONSTRUCTION
AREA
7" x 10"
10" x 14"
D7119
14" x 10"
D4136
7" x 10"
10" x 14"
D7120
14" x 10"
D4015
7" x 10"
10" x 14"
D7121
7" x 10"
10" x 14"
D7122
7" x 10"
10" x 14"
D7123
7" x 10"
10" x 14"
D7124
7" x 10"
10" x 14"
D7125
7" x 10"
10" x 14"
D7126
7" x 10"
10" x 14"
D7127
7" x 10"
10" x 14"
D7128
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
Available Sizes
7" x 10"
10" x 14"
14" x 10"
7" x 10"
10" x 14"
C7129
10" x 14"
D4017
How to Order Signs:
Codes
0710
1014
1410
1

3

2

4

Select Material Code:
PVS
Select Sign Base Part Number:
D7125
Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710D7125
Crane and Construction Signals
Choose from Standard, Mobile and Overhead Crane Signal
Styles, as well as Ready Mix Truck Signals Style. Available as
wallet cards, labels, and signs. Select styles also available as
laminated, durable, flexible plastic posters.
Truck Signals
Crane Hand Signals
Overhead Crane Hand Signals
29 CFR § 1926.1422 Signals – Hand Signal
Chart.
Hand signal charts must be either posted on
the equipment or conspicuously posted in
the vicinity of the hoisting operations.
Source: ANSI/ASME B30.5-2007 - Mobile and Locomotive Cranes, Section 5-3.3: Signals
Standard
Plastic Wallet Card – 3 3/8" x 2 1/8"
Standard (2-sided)
Mobile (2-sided)
Overhead (1-sided)
Ready Mix (1-sided)
PSS027
PSS028
PSS026
PSS029
Description
UOM
Wallet Card, 2-sided
Each
Wallet Card, 1-sided
Each
Mobile
Overhead
Label - Adhesive Vinyl (PVS)
5" x 3 1/2" (0503)
Sign (see How to Order Signs above box)
To Order Labels: Select Material Code, Size Code, & Base Part
Number. Combine Codes in Specific Order for Complete Part Number
Standard Mobile Overhead B3507
B3552
B3546
Ready Mix
Description
UOM
Label
Pkg. of 5
Available size 14" x 10" (1410) only
Standard
Mobile
Overhead
Ready Mix
B4542
B4547
B5616
B4513
Description
UOM
Sign
Each
14
Safety Signs & Labels Large Signs
Mark pathways, warn of hazards, and display safety reminders in a big
way around the construction site with these Large Signs. On an active
job site, signs with bold messages and large letters are visible to gain
the necessary attention from varying distances.
18" x 24"
24" x 36"
D7334
18" x 24"
24" x 36"
D7335
18" x 24"
24" x 36"
D7336
18" x 24"
24" x 36"
D7337
18" x 24"
24" x 36"
D7338
18" x 24"
24" x 36"
D7339
18" x 24"
24" x 36"
B7340
18" x 24"
24" x 36"
B7341
18" x 24"
24" x 36"
B7342
18" x 24"
24" x 36"
B7343
Available Materials
Adhesive Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PRS
PAS
Available Sizes
18" x 24"
24" x 18"
24" x 36"
Codes
1824
2418
2436
How to Order Signs:
1

3

18" x 24"
24" x 36"
B7344
24" x 18"
B4505
Select Material Code:
PVS
Select Label Sign
Part Number: D7336
2

4

Select Size Code:
1824
Combine Codes in Specific Order for
Complete Part Number: PVS1824D7336
Safety Signs & Labels
800.777.3300 | Panduit.com
15
Electrical
Signs
7" x 10"
10" x 14"
D7130
7" x 10"
10" x 14"
D7131
7" x 10"
10" x 14"
D7132
7" x 10"
10" x 14"
D7133
14" x 10"
D4115
7" x 10"
10" x 14"
D7135
14" x 10"
D4012
7" x 10"
10" x 14"
D7136
7" x 10"
10" x 14"
D7137
7" x 10"
10" x 14"
D7134
7" x 10"
10" x 14"
D7142
7" x 10"
10" x 14"
D7146
7" x 10"
10" x 14"
W7138
7" x 10"
10" x 14"
W7139
14" x 10"
D4188
7" x 10"
10" x 14"
D7143
7" x 10"
10" x 14"
D7144
7" x 10"
10" x 14"
D7145
7" x 10"
10" x 14"
C7140
7" x 10"
10" x 14"
C7147
7" x 10"
10" x 14"
N7141
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
Available Sizes
7" x 10"
10" x 14"
14" x 10"
Codes
0710
1014
1410
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
D7130
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710D7130
Roll of Signs
Keep multiple safety signs for
on-the-spot placement.
•Convenient, portable and economical
•7" x 10" signs are surface-printed on
0.004" vinyl with permanent acrylic
adhesive back
•Matte material is moisture-resistant
•Compact roll protects additional sign
versions underneath
•Simply peel-and-stick; adheres to
most surfaces
•Available in two roll size options:
50 per roll and 100 per roll
50 / Roll PVS0710D4019-L
100 / Roll PVS0710D4019-C
50 / Roll PVS0710W4025-L
100 / Roll PVS0710W4025-C
50 / Roll PVS0710C4029-L
100 / Roll PVS0710C4029-C
Safety Signs & Labels 16
Labels
3 1/2" x 5"
5" x 7"
D7148
3 1/2" x 5"
5" x 7"
D7149
3 1/2" x 5"
5" x 7"
D7150
3 1/2" x 5"
5" x 7"
D7151
3 1/2" x 5"
5" x 7"
D7152
3 1/2" x 5"
5" x 7"
D7153
3 1/2" x 5"
5" x 7"
D7154
3 1/2" x 5"
5" x 7"
D7155
3 1/2" x 5"
D3161
3 1/2" x 5"
D3164
3 1/2" x 5"
D3165
3 1/2" x 5"
D3167
3 1/2" x 5"
D3166
3 1/2" x 5"
D3168
3 1/2" x 5"
D3170
3 1/2" x 5"
D3175
3 1/2" x 5"
D3176
3 1/2" x 5"
D3177
3 1/2" x 5"
D3178
3 1/2" x 5"
D3306
3 1/2" x 5"
D3297
3 1/2" x 5"
C3622
3 1/2" x 5"
B3512
Magnetic Lockout Label
6" x 2"
B3536
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
How to Order Labels:
3

3 1/2" x 5"
B3541
With Detached Arrow
3 1/2" x 5"
B3530
Select Label Base
Part Number: D7149
Codes
PVS
PLVS
1

4

Apply, move, and re-apply to most steel surfaces
when servicing equipment.
Available Sizes
3 1/2" x 5"
6" x 2"
5" x 7"
Select Material Code:
PVS
2

5" x 3 1/2"
7" x 5"
D3120
Codes
0305
0602
0507
Available Material
Magnetic Vinyl (Each)
Select Size Code:
0305
Code
PVMS
How to Order:
Combine Codes in Specific Order
for Complete Part Number: PVS0305D7149
3

Select Label Base Part Number:
D3120
Available Sizes
5" x 3 1/2"
7" x 5"
1

4

Select Material Code:
PVMS
2

Codes
0503
0705
Select Size Code:
0503
Combine Codes in Specific Order
for Complete Part Number: PVMS0503D3120
Arc Flash Protection Labels
Incident Energy at 18 inches (cal/cm2):
Required Level of PPE:
Arc Flash Hazard Boundary:
PPE Minimum Arc Rating (cal/cm2):
Hazard Risk Category (HRC):
Nominal System Voltage:
Equipment ID:
3 1/2" x 5"
D7156
Post labels clearly identifying electrical hazards to protect
workers from arc flash, shock and electrocution.
Incident Energy at 18 inches (cal/cm2):
How to Order Labels:
3

Select Label Base
Part Number: W7162
Codes
PVS
PLVS
1

4

2

5" x 7"
3 1/2" x 5"
W7158
5" x 7"
Required Level of PPE:
PPE Minimum Arc Rating (cal/cm2):
Hazard Risk Category (HRC):
Nominal System Voltage:
Equipment ID:
Available Sizes
3 1/2" x 5"
5" x 7"
Select Material Code:
PVS
Date of Assessment:
3 1/2" x 5"
D7157
Arc Flash Hazard Boundary:
•Bold type and graphics to be clearly seen
•Labels define specifics of electrical hazards and appropriate PPE
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
5" x 7"
Date of Assessment:
3 1/2" x 5"
W7159
5" x 7"
3 1/2" x 5"
W7160
5" x 7"
3 1/2" x 5"
W7161
5" x 7"
3 1/2" x 5"
W7162
5" x 7"
3 1/2" x 5"
W7163
5" x 7"
3 1/2" x 5"
W7164
5" x 7"
Codes
0305
0507
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305W7162
Safety Signs & Labels
800.777.3300 | Panduit.com
17
Voltage and Fiber Optic Markers
• Available in Adhesive-backed vinyl and Pre-coiled polyester protects legend with
excellent life and adhesion properties
• Indoor/outdoor rated for resistance to UV light, chemical atmosphere, and abrasion
• Black on orange labels provide a highly visible warning for electrical hazards
• Temperature Range: -40° to 250°F
Adhesive-Backed Vinyl Markers
Size
Code
Marker Size
Pipe/Conduit
O.D. Range
Markers
Per Card
Cards/Pkg.
Total
Markers
AY
2.25"H x 9"W
3" and Over
1
5
5
BY
1.13"H x 4.5"W
1.25" – 3"
4
5
20
CY
0.5"H x 2.2"W
1.25" – Under
18
5
90
Pipe/Conduit
O.D. Range
Markers
Per Card
Cards/Pkg.
Total
Markers
Pre-Coiled Poly Markers
Size
Code
Marker Size
MY
23"H x 14"W
2.25" – 6"
1
1
1
RY
8"H x 8"W
0.75" – 2.25"
1
1
1
How to Order:
1

Select Legend Code:
PCV-110
3

Combine Codes in Specific Order
for Complete Part Number: PCV-110AY
Available sizes MY, RY.
Part No.
Legend
Part No.
Legend
Part No.
Legend
PCV-110
110 VOLTS
PCV-230
230 VOLTS
PCV-480
480 VOLTS
PCV-115
115 VOLTS
PCV-2400
2400 VOLTS
PCV-600
600 VOLTS
PCV-120/208
120/208 VOLTS
PCV-240
240 VOLTS
PCV-BLANK
BLANK –
NO LEGEND
PCV-ES
EMERGENCY
SERVICE
PCV-120
120 VOLTS
PCV-277/480
277/480 VOLTS
PCV-12470
12470 VOLTS
PCV-277
277 VOLTS
PCV-13200
13200 VOLTS
PCV-380
380 VOLTS
PCV-FA
FIRE ALARM
PCV-13800
13800 VOLTS
PCV-3PH
THREE PHASE
PCV-FO
FIBER OPTIC
PCV-1PH
SINGLE PHASE
PCV-415
415 VOLTS
PCV-FOC
PCV-208
208 VOLTS
PCV-4160
4160 VOLTS
FIBER OPTIC
CABLE
PCV-220
220 VOLTS
PCV-440
440 VOLTS
PCV-2300
2300 VOLTS
PCV-460
460 VOLTS
• Black on orange labels
provide a highly visible
warning for electrical hazards
• Indoor rated economical
general purpose vinyl
• Excellent adhesion
properties when applied to a
clean, dry surface
• Temperature Range:
-40° to 200°F
Select Size Code:
2.25"H x 9"W – AY
To Order Pre-Coiled: Add size code after part number.
To Order Adhesive-Backed: Add size code after part number. Available sizes AY, BY, CY.
PCV-MAIN
MAIN
PCV-TELE
TELEPHONE
Voltage Marker Books
2

Style M
Part No.
Style R
Part No.
Legend
–
PCV-120
120 Volts
–
PCV-480
480 Volts
PCV-FO
PCV-FO
Fiber Optic
ISO Warning Symbol Labels
Paper
Part No.
Legend
PCVB-110Y
110 VOLTS
PCVB-220Y
220 VOLTS
PCVB-277Y
277 VOLTS
PCVB-277/480Y
277/480 VOLTS
PCVB-440Y
440 VOLTS
PCVB-480Y
480 VOLTS
PCVB-4160Y
4160 VOLTS
•Indoor rated general purpose
•Excellent adhesion properties when
applied to a clean, dry surface
•Temperature Range: -65° to 200°F
WL1
Part No.
Description
WL1
WL3
Size
Labels Per Roll.
2" x 2"
500
2" x 2"
500
STATIC AWARENESS WARNING
Marker Size
Markers/
Page
Markers/
Book
1.5"H x 3.25"W
3
30
WL3
Vinyl
•Laminated label material protects legend from
abrasion and chemicals
•Indoor/outdoor rated for resistance to UV light,
chemical atmosphere, and abrasion
•Excellent life and adhesion properties
•Temperature Range: -40° to 176°F
WL33Y
Part No.
Description
Size
Labes Per Roll.
WL33Y
RISK OF ELECTRIC SHOCK symbol
4.5" x 4.5"
50
18
Safety Signs & Labels Electrical Labels in Dispenser
1" x 1.5"
PLD-30
120 V
220 V
230 V
1" x 1.5"
PLD-36
1" x 1.5"
PLD-37
1" x 1.5"
PLD-45
1" x 1.5"
PLD-52
1" x 1.5"
PLD-56
277/480 V
1" x 1.5"
PLD-38
1" x 1.5"
PLD-46
1" x 1.5"
PLD-91
1" x 1.5"
PLD-47
1" x 1.5"
PLD-74
1" x 1.5"
PLD-72
1" x 1.5"
PLD-58
1" x 3"
PLD-60*
1.5" x 1"
PLD-67
1" x 1.5"
PLD-43
1" x 1.5"
PLD-68
1" x 1.5"
PLD-12
1" x 1.5"
PLD-81
1" x 1.5"
PLD-80
.75" dia.
PLD-57*
1" x 2"
PLD-71*
• Laminated polyester label protects legend from
abrasion and chemicals
• Indoor/outdoor rated for resistance to UV light, chemical
atmosphere, and abrasion
• Excellent life and adhesion properties
• Temperature Range: -40° to 250°F
• 200* labels/dispenser
*PLD-57, 300 labels/dispenser
*PLD-60, 100 labels/dispenser
*PLD-71, 150 labels/dispenser
Conductor Identification Labels
CE
CE symbol
Size: A, B, C, D, E
LF
Lead free symbol
Size: A
ES
Earth (ground)
Size: A, B, C, D, E
L1
Outer conductor
Size: A, B, C, D, E
N
Neutral conductor
Size: A, B, C, D
• Pre-printed polyester
laminated label protects
legend from abrasion
and chemicals
• Indoor/outdoor rated for
resistance to UV light,
chemical atmosphere,
and abrasion
• Excellent life and
adhesion properties
• Temperature Range:
-40° to 250°F
• Package of 10 sheets
Electrical Symbol Labels on Cards
L2
Outer conductor 2
Size: A, B, C, D, E
PE
Protective conductor
Size: A
L3
Outer conductor 2
Size: A, B, C, D, E
ROHS
RoHS wheeled
bin symbol
Size: A
SS
Safety function
Size: A, B, C, D
Size Code
Label Size Diameter
Labels/Sheet
Pkg. Qty.
200
A
0.49"
20
B
0.63"
20
200
C
0.79
10
100
D
0.98"
10
100
E
1.24"
10
100
0.5" x 0.5" 0.75" x .075" 0.5" x 0.5" 0.75" x 0.75" 0.5" x 0.5" 0.75" x 0.75"
AT
E
EC
Warning of dangerous
Earth (ground)
Safety function
electrical voltage
• Pre-printed black on yellow with
adhesive back vinyl cloth
• Conformable material with
repositionable adhesive allows label
to be removed and reused or used in
temporary applications
• Indoor/outdoor rated for durability,
high temperature resistance, and
dimensional stability for rough or
textured surfaces
• Temperature Range: -50° to 170°F
• Packages of 10 cards
0.5" x 0.5" 0.75" x 0.75"
HT
Static sensitive
device – handling
precautions required
0.5" x 0.5" 0.75" x 0.75"
PE
Protective conductor
Size Code
Label Size
Labels/Card
Pkg. Qty.
H
0.5" x 0.5"
68
680
J
0.75" x 0.75"
36
360
How to Order:
How to Order:
3

Select Symbol Code:
– CE
1

4

Material Code:
PESS-
2

Select Size Code:
.49" – A-
Combine Codes in Specific Order
for Complete Part Number: PESS-A-CE
1

3

Material Code:
PESCSelect Symbol Code:
– AT
2

4

Select Size Code:
1/2" – HCombine Codes in Specific Order
for Complete Part Number: PESC-H-AT
Safety Signs & Labels
800.777.3300 | Panduit.com
19
Equipment
Signs
7" x 10"
10" x 14"
D7165
7" x 10"
10" x 14"
D7166
14" x 10"
D4021
7" x 10"
10" x 14"
D7167
7" x 10"
10" x 14"
D7168
14" x 10"
D4139
7" x 10"
10" x 14"
D7169
7" x 10"
10" x 14"
D7170
7" x 10"
10" x 14"
W7173
14" x 10"
D4177
7" x 10"
10" x 14"
D7171
7" x 10"
10" x 14"
D7172
7" x 10"
10" x 14"
W7174
7" x 10"
10" x 14"
C7175
14" x 10"
C4722
7" x 10"
10" x 14"
C7176
7" x 10"
10" x 14"
C7177
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
7" x 10"
10" x 14"
C7178
Available Sizes
7" x 10"
10" x 14"
14" x 10"
Codes
0710
1014
1410
7" x 10"
10" x 14"
C7179
7" x 10"
10" x 14"
C7180
7" x 10"
10" x 14"
C7181
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
D7165
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710D7165
Safety Signs & Labels 20
Labels
California Code of
Regulations, Title 8,
Section 2946, Article 37
3" x 7"
D3036
3 1/2" x 5"
D3019
3 1/2" x 5"
D3148
4" x 7"
D3114
4" x 7"
D3035
3 1/2" x 5"
D3290
3 1/2" x 5"
D3280
3 1/2" x 5"
D3284
3 1/2" x 5"
D3155
With Detached Arrow
5" x 7"
W3658
3 1/2" x 5"
C3799
3 1/2" x 5"
C3686
1 1/2" x 3"
D3020
1 1/2" x 3"
D3018
3 1/2" x 5"
D3304
3 1/2" x 5"
C3791
Codes
PVS
PLVS
How to Order Labels:
3 1/2" x 5"
C3793
5" x 7"
C3655
3 1/2" x 5"
B3927
3

3 1/2" x 5"
B3923
1" x 1.5"
PLD-18
1" x 1.5"
PLD-3
1" x 1.5"
PLD-4
1" x 1.5"
PLD-7
1" x 1.5"
PLD-11
1" x 1.5"
PLD-22
1" x 1.5"
PLD-28
1" x 1.5"
PLD-29
0.75" dia.
PLD-62
0.75" dia.
PLD-64
0.75" dia.
PLD-77
0.75" dia.
PLD-78
• Laminated polyester label protects legend from abrasion
and chemicals
• Indoor/outdoor rated for resistance to UV light, chemical
atmosphere, and abrasion
• Excellent life and adhesion properties
• Temperature Range: -40° to 250°F
• Can be clearly identified with Panduit permanent marking pens
3 1/2" x 5"
D3134
Available Sizes
1 1/2" x 3"
3 1/2" x 5"
3" x 7"
4" x 7"
5" x 7"
Select Material Code:
PVS
2

Codes
0103
0305
0307
0407
0507
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305D3304
Production Control Labels on Cards
1" x 1.5"
PLD-17
0.75" dia.
PLD-63
1

4

Select Label Base
Part Number: D3304
Production Control Labels in Dispenser
3 1/2" x 5"
D3132
3 1/2" x 5"
D3156
With Detached Arrow
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
3 1/2" x 5"
D3145
Size
Labels/
Dispenser
Rectangle
1" x 1.5"
200
Circle
0.75" dia.
300
Shape
0.63" x 1.5"
PCWL-BL
Blank White
0.63" x 1.5"
PCWL-ACC
Accepted
0.63" x 1.5"
PCWL-CAL
Calibration
0.63" x 1.5"
PCWL-CALD
Calibrated
0.63" x 1.5"
PCWL-ICAL
Calibration
0.63" x 1.5"
PCWL-REJ
Rejected
• Conformable vinyl cloth with repositionable adhesive
allows label to be removed and reused or used in
temporary applications
• Indoor/outdoor rated provides durability, high temperature
resistance, and dimensional stability for rough or
textured surfaces
• Temperature Range: -50° to 170°F
• Package of 25 cards
• Can be clearly identified with Panduit permanent
marking pens
Labels/Card
Total Labels
14
350
Fire & Emergency
Signs
10" x 7"
14" x 10"
D7207
7" x 10"
10" x 14"
C7197
7" x 10"
10" x 14"
N7190
10" x 14"
B4551
10" x 14"
B4552
10" x 14"
B4512
Safety Signs & Labels
800.777.3300 | Panduit.com
7" x 10"
10" x 14"
B7182
7" x 10"
10" x 14"
B7200
7" x 10"
10" x 14"
B7187
7" x 10"
10" x 14"
B7183
10" x 7"
14" x 10"
B7209
7" x 10"
10" x 14"
B7192
7" x 10"
10" x 14"
B7195
21
7" x 10"
10" x 14"
B7184
7" x 10"
10" x 14"
B7185
7" x 10"
10" x 14"
B7186
7" x 10"
10" x 14"
B7199
7" x 10"
10" x 14"
B7201
7" x 10"
10" x 14"
B7203
7" x 10"
10" x 14"
B7204
7" x 10"
10" x 14"
B7206
10" x 7"
14" x 10"
B7194
10" x 7"
14" x 10"
B7196
10" x 7"
14" x 10"
B7193
10" x 7"
14" x 10"
B7208
7" x 10"
10" x 14"
B7205
7" x 10"
10" x 14"
B7188
7" x 10"
10" x 14"
B7189
14" x 10"
B4519
10" x 7"
14" x 10"
B7191
Column Markers
18" x 4"
B4585
12" x 4"
18" x 4"
24" x 4"
B7202
18" x 4"
B4581
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
18" x 4"
B4935
Codes
PVS
PLVS
PRS
PAS
12" x 4"
18" x 4"
24" x 4"
B7210
Available Sizes
7" x 10"
10" x 7"
10" x 14"
14" x 10"
12" x 4"
18" x 4"
24" x 4"
Adhesive Vinyl (12" x 24")
Glow Adhesive (12" x 24")
18" x 4"
24" x 4"
B7211
Codes
0710
1007
1014
1410
1204
1804
2404
PVS1224B3437
PVS1224B3505
Material
UOM
Adhesive Vinyl
Each
Glow Adhesive
Each
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
B7182
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710B7182
22
Safety Signs & Labels Labels
3 1/2" x 5"
B3550
3 1/2" x 5"
5" x 7"
B3440
’16
3 1/2" x 5"
5" x 7"
B3526
’17
’18
3 1/2" x 5"
5" x 7"
B3445
’19
3 1/2" x 5"
5" x 7"
B3449
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
How to Order Labels:
2" x 14"
B3452
3

5" x 3 1/2"
B3539
Select Label Base
Part Number: B3550
Codes
PVS
PLVS
1

4

Available Sizes
3 1/2" x 5"
5" x 3 1/2"
3" x 7"
5" x 7"
2" x 14"
Select Material Code:
PVS
2

Codes
0305
0503
0307
0507
0214
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305B3550
3" x 7"
B3431
First Aid
Signs
7" x 10"
10" x 14"
S7213
7" x 10"
10" x 14"
S7212
7" x 10"
10" x 14"
S7214
7" x 10"
10" x 14"
B7225
10" x 7"
14" x 10"
B7224
7" x 10"
10" x 14"
B7217
10" x 7"
14" x 10"
B7221
7" x 10"
10" x 14"
B7228
10" x 7"
14" x 10"
B7223
10" x 7"
14" x 10"
B7222
7" x 10"
10" x 14"
B7227
7" x 10"
10" x 14"
B7229
7" x 10"
10" x 14"
B7220
14" x 10"
B4503
14" x 10"
B4502
7" x 10"
10" x 14"
B7218
14" x 10"
B4508
10" x 7"
14" x 10"
B7219
See How to Order Signs on next page
Labels
3 1/2" x 5"
B3531
3 1/2" x 5"
B3915
3" x 7"
B3521
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
How to Order Labels:
17" x 7"
B4997
3 1/2" x 5"
5" x 7"
B7230
3" x 7"
B3519
3

6" x 5"
B3532
Select Label Base
Part Number: B3531
Codes
PVS
PLVS
1

4

Available Sizes
3 1/2" x 5"
3" x 7"
6" x 5"
5" x 7"
Select Material Code:
PVS
2

Codes
0305
0307
0605
0507
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305B3531
Safety Signs & Labels
800.777.3300 | Panduit.com
23
Housekeeping & Hygiene
Signs – Adhesive Vinyl (PVS) and Polyethylene Plastic (PRS)
7" x 10"
10" x 14"
C7231
7" x 10"
10" x 14"
C7232
7" x 10"
10" x 14"
C7233
7" x 10"
10" x 14"
C7234
7" x 10"
10" x 14"
C7235
7" x 10"
10" x 14"
N7265
7" x 10"
10" x 14"
N7266
7" x 10"
10" x 14"
S7239
7" x 10"
10" x 14"
B7269
7" x 10"
10" x 14"
B7270
14" x 10"
C4643
7" x 10"
10" x 14"
C7236
7" x 10"
10" x 14"
C7237
7" x 10"
10" x 14"
N7264
7" x 10"
10" x 14"
N7243
14" x 10"
C4663
7" x 10"
10" x 14"
N7238
7" x 10"
10" x 14"
N7242
14" x 10"
N4804
7" x 10"
10" x 14"
B7240
14" x 10"
N4814
7" x 10"
10" x 14"
B7241
7" x 10"
10" x 14"
B7267
7" x 10"
10" x 14"
B7268
14" x 10"
B4944
7" x 10"
10" x 14"
B7245
14" x 10"
B4974
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
7" x 10"
10" x 14"
B7244
7" x 10"
10" x 14"
B7271
14" x 10"
B4586
Codes
PVS
PLVS
PRS
PAS
Available Sizes
7" x 10"
10" x 7"
10" x 14"
14" x 10"
17" x 7"
Codes
0710
1007
1014
1410
1707
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
S7213
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710S7213
24
Safety Signs & Labels Signs – Adhesive Vinyl (PVS) and Polyethylene Plastic (PRS) continued
7" x 10"
10" x 14"
B7246
7" x 10"
10" x 14"
B7247
7" x 10"
10" x 14"
B7248
7" x 10"
10" x 14"
B7249
7" x 10"
10" x 14"
B7255
7" x 10"
10" x 14"
B7256
7" x 10"
10" x 14"
B7250
7" x 10"
10" x 14"
B7251
7" x 10"
10" x 14"
B7252
7" x 10"
10" x 14"
B7253
7" x 10"
10" x 14"
B7254
7" x 10"
10" x 14"
B7257
7" x 10"
10" x 14"
B7258
7" x 10"
10" x 14"
B7259
7" x 10"
10" x 14"
B7260
7" x 10"
10" x 14"
B7261
10" x 7"
14" x 10"
B7262
10" x 7"
14" x 10"
B7263
4" x 12"
B3511
4" x 12"
B3510
4" x 12"
B5531
3" x 10"
B4557
3" x 10"
B4559
3" x 10"
B4563
14" x 10"
B4521
14" x 10"
B5624
14" x 10"
B4578
14" x 10"
B4575
14" x 10"
B4576
14" x 10"
B4529
See How to Order Signs on next page
Labels – Adhesive Vinyl (PVS)
2" x 6"
C3621
3 1/2" x 5"
C3612
2" x 6"
B3504
3 1/2" x 5"
N3817
3 1/2" x 5"
B3920
2" x 12"
B3522
3 1/2" x 5"
B3523
3 1/2" x 5"
B3535
3 1/2" x 5"
B3520
3 1/2" x 5"
B3503
3 1/2" x 5"
B3506
Available Material
Adhesive Vinyl (Pkg. of 5)
3 1/2" x 5"
B3538
3 1/2" x 5"
B3540
3 1/2" x 5"
B3529
Code
PVS
How to Order Labels:
3

3" x 7"
B3518
3 1/2" x 5"
B3524
Select Label Base
Part Number: B3529
1

4

3" x 7"
B3528
Available Sizes
2" x 6"
3 1/2" x 5"
3" x 7"
2" x 12"
Select Material Code:
PVS
2

Codes
0206
0305
0307
0212
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305B3529
Safety Signs & Labels
800.777.3300 | Panduit.com
25
Personal Protection
Signs
7" x 10"
10" x 14"
D7272
7" x 10"
10" x 14"
D7273
7" x 10"
10" x 14"
D7274
7" x 10"
10" x 14"
D7275
7" x 10"
10" x 14"
C7279
7" x 10"
10" x 14"
C7280
7" x 10"
10" x 14"
D7276
14" x 10"
D4106
7" x 10"
10" x 14"
D7277
7" x 10"
10" x 14"
C7278
14" x 10"
C4683
7" x 10"
10" x 14"
C7281
7" x 10"
10" x 14"
C7282
14" x 10"
C4627
7" x 10"
10" x 14"
C7283
7" x 10"
10" x 14"
C7284
7" x 10"
10" x 14"
N7285
14" x 10"
C4756
7" x 10"
10" x 14"
N7286
7" x 10"
10" x 14"
N7287
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
Available Sizes
3" x 10"
4" x 12"
7" x 10"
10" x 7"
10" x 14"
14" x 10"
Codes
0310
0412
0710
1007
1014
1410
How to Order Signs:
1

3

2

4

Select Material Code:
PVS
Select Sign Base Part Number:
B7246
Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710B7246
Labels
3 1/2" x 5"
D3307
3 1/2" x 5"
D3298
3 1/2" x 5"
C3617
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
How to Order Labels:
3

3 1/2" x 5"
C3618
3 1/2" x 5"
C3623
Select Label Base
Part Number: D3298
Codes
PVS
PLVS
1

4

Available Size
3 1/2" x 5"
Select Material Code:
PVS
2

Code
0305
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305D3298
Safety Signs & Labels 26
Hard Hat Labels / Helmet Decals
Display your skill or commitment to safety in a personal way.
Adhesive vinyl 2.25" dia. labels are flexible to conform to the curve of a hard hat. Package of 10.
Standard
PHL3381
PHL3343
PHL3361
PHL3345
PHL3125
PHL3354
PHL3347
PHL3355
PHL3351
PHL3358
PHL3165
PHL3163
PHL3365
PHL3188
PHL3315
PHL3317
PHL3204
PHL3359
Reflective (Each)
PHL3357
PHL3126
PHL3132
PHL3619
PHL3323
PHL3632
PHL3649
Flag Helmet Stickers
Show personal
country pride.
Adhesive vinyl label has
permanent adhesive
back with peel-off liner.
USA
Part No.
Canada
Part No.
Mexico
Part No.
Size
Std. Pkg.
Qty.
PHL3377
PHL3402
PHL3386
1" x 1 3/4"
10
PHL3212
PHL3404
PHL3388
1 1/2" x 3"
10
Smoking Control
Signs
7" x 10"
10" x 14"
N7296
7" x 10"
10" x 14"
B7292
7" x 10"
10" x 14"
B7293
7" x 10"
10" x 14"
B7288
7" x 17"
B4533
7" x 10"
10" x 14"
B7295
7" x 17"
B4526
7" x 10"
10" x 14"
B7289
7" x 10"
10" x 14"
B7290
4" x 12"
B4531
7" x 17"
B4501
7" x 10"
10" x 14"
B7300
10" x 7"
14" x 10"
B7294
7" x 5" 10" x 7"
B7291
7" x 5" 10" x 7"
B7297
7" x 5" 10" x 7"
B7298
7" x 5" 10" x 7"
B7301
7" x 5" 10" x 7"
B7302
7" x 5" 10" x 7"
B7299
7" x 5" 10" x 7"
B7303
See How to Order Signs on next page
Safety Signs & Labels
800.777.3300 | Panduit.com
27
Labels
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
1 1/2" x 3"
B3515
3" x 7"
B3589
Codes
PVS
PLVS
Available Sizes
1 1/2" x 1 1/2"
1 1/2" x 3"
4" x 4"
3" x 7"
Codes
0101
0103
0404
0307
How to Order Labels:
1 1/2" x 1 1/2" 4" x 4"
B7304
1 1/2" x 3"
B3514
1

Select Material
Code: PVS
2

Select Size
Code: 0101
3

Select Label Base
Part Number: B7304
4

Combine Codes in Specific Order for
Complete Part Number: PLVS0101B7304
Traffic Industrial
Signs
7" x 10"
10" x 14"
D7321
7" x 10"
10" x 14"
W7305
7" x 10"
10" x 14"
C7322
7" x 10"
10" x 14"
C7307
7" x 10"
10" x 14"
C7308
7" x 10"
10" x 14"
C7314
7" x 10"
10" x 14"
N7316
14" x 10"
C5662
7" x 10"
10" x 14"
C7309
7" x 10"
10" x 14"
C7310
14" x 10"
C4604
7" x 10"
10" x 14"
N7317
7" x 10"
10" x 14"
C7311
7" x 10"
10" x 14"
C7312
7" x 10"
10" x 14"
C7315
7" x 10"
10" x 14"
C7306
14" x 10"
C4601
Codes
PVS
PLVS
PRS
PAS
7" x 10"
10" x 14"
C7313
14" x 10"
N4816
7" x 10"
10" x 14"
N7318
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
7" x 10"
10" x 14"
N7319
Available Sizes
4" x 12"
7" x 5"
7" x 10"
10" x 7"
10" x 14"
14" x 10"
7" x 17"
Codes
0412
0705
0710
1007
1014
1410
0717
7" x 10"
10" x 14"
N7320
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
B7288
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PVS0710B7288
Safety Signs & Labels 28
Labels
3 1/2" x 5"
C3613
3 1/2" x 5"
B3576
3 1/2" x 5"
B3571
Available Materials
Adhesive Vinyl (Pkg. of 5)
Polyester Laminated Vinyl (Each)
How to Order Labels:
3

3 1/2" x 5"
B3562
3 1/2" x 5"
B3527
Select Label Base
Part Number: B3562
Codes
PVS
PLVS
1

4

Available Size
3 1/2" x 5"
Select Material Code:
PVS
2

Code
0305
Select Size Code:
0305
Combine Codes in Specific Order
for Complete Part Number: PVS0305B3562
3 1/2" x 5"
B3525
Labels – Polyester Laminated Vinyl (PLVS)
2" x 5"
B3557
2" x 5"
B3559
2" x 5"
B3545
2" x 5"
B3549
Available Material
Polyester Laminated Vinyl (Each)
How to Order Labels:
2" x 5"
B3543
2" x 5"
B3567
2" x 5"
B3565
2" x 5"
B3569
Fluorescent Alert Signs
Bright, attention-getting signs for cross traffic areas.
•Highly visible fluorescent red-orange or lime-yellow
•Durable 0.060" plastic
•Pre-drilled mounting holes
•For indoor use only
24" x 18"
PSSFB4055
18" x 12"
PSSFC4038
24" x 18"
PSSFB4059
18" x 12"
PSSFC4040
24" x 18"
PSSFB4057
18" x 12"
PSSFC4034
18" x 12"
PSSFC4036
3

Select Label Base
Part Number: B3545
Code
PLVS
1

4

Available Size
2" x 5"
Select Material Code:
PLVS
2

Code
0205
Select Size Code:
0205
Combine Codes in Specific Order
for Complete Part Number: PLVS0205B3545
Safety Signs & Labels
800.777.3300 | Panduit.com
29
Vinyl Cloth Letters and Numbers Markers
Consecutive Number Marker Sets
• Contrasting colors for easy visibility
• Thin conformable material with repositionable adhesive allows label
to be removed and reused
• Indoor/outdoor rated provides durability, high temperature resistance
and dimensional stability for rough or textured surfaces
• Black on yellow characters
• Temperature Range: -50° to 170°F
Part No.
Series
Character
Height
Marker Size
Markers/
Card
Cards/
Pkg.
25
PCL037-0-9
0 thru 9
0.38"
0.50"H x 0.34"W
78
PCLCP037-0-9
0 thru 9
0.38"
0.50"H x 0.34"W
78
1
PCL062-0-9
0 thru 9
0.63"
0.75"H x 0.56"W
32
25
PCLCP062-0-9
0 thru 9
0.63"
0.75"H x 0.56"W
32
1
PCL100-0-9
0 thru 9
1"
1.5"H x 0.88"W
10
25
PCLCP100-0-9
0 thru 9
1"
1.5"H x 0.88"W
10
1
PCL200-0-9
0 thru 9
2"
2.25"H x 0.88"W
10
25
PCLCP200-0-9
0 thru 9
2"
2.25"H x 0.88"W
10
1
PCLCP300-0-9
0 thru 9
3"
3.5"H x 1.5"W
6
1
Character
Height
Marker Size
Markers/
Card
Cards/
Pkg.
25
Consecutive Letter Marker Sets
Part No.
Individual Letter and Number Markers
Part No.
Character
Height
Marker Size
Markers/Card
Cards/Pkg.
PCL037-*
0.38"
0.50"H x 0.34"W
78
25
PCL062-*
0.63"
0.75"H x 0.56"W
32
25
PCL100-*
1"
1.5"H x 0.88"W
10
25
PCL200-*
2"
2.25"H x 0.88"W
10
25
PCL300-*
3"
3.5"H x 1.5"W
6
25
How to Order:
1

Refer to Part Number (No.):
0.38" – PCL037-*
2

Specify Character Legend A thru Z, 0 thru 9, – (dash)
for Asterisk (*): PCL037-A
Vinyl Letter and Number Markers
Series
PCL037-A-Z
A thru Z
0.38"
0.50"H x 0.34"W
78
PCLCP037-A-Z
A thru Z
0.38"
0.50"H x 0.34"W
78
1
PCL062-A-Z
A thru Z
0.63"
0.75"H x 0.56"W
32
25
PCLCP062-A-Z
A thru Z
0.63"
0.75"H x 0.56"W
32
1
PCL100-A-J
A thru J
1"
1.5"H x 0.88"W
10
25
PCL100-K-T
K thru T
1"
1.5"H x 0.88"W
10
25
PCL100-U-Z
U thru Z
1"
1.5"H x 0.88"W
10
25
PCLCP100-A-Z
A thru Z
1"
1.5"H x 0.88"W
10
1
PCL200-A-J
A thru J
2"
2.25"H x 0.88"W
10
25
PCL200-K-T
K thru T
2"
2.25"H x 0.88"W
10
25
PCL200-U-Z
U thru Z
2"
2.25"H x 0.88"W
10
25
PCLCP200-A-Z
A thru Z
2"
2.25"H x 0.88"W
10
1
PCLCP300-A-Z
A thru Z
3"
3.5"H x 1.5"W
6
1
Reflective Vinyl Letters and Numbers Markers
• Indoor/outdoor rated conformable heavy duty adhesive back vinyl
for flat applications
• Resistant to UV light, chemical atmosphere and abrasion
• Black on yellow characters for visible safety and facility identification
• Temperature Range: -50° to 225°F
• Contrasting black and yellow visibility
• Heavy-duty reflective vinyl with adhesive
back flat applications for safety
and facility identification
• Indoor/outdoor rated for resistance to UV
light, chemical atmosphere, and abrasion
• Temperature Range: -30° to 200°F
Individual Letter and Number Markers
Part No.
Character
Height
Marker Size
Color Character
on Background
Markers/
Card
PRL100BY-*
1"
1.63"H x 1"W
Black on Yellow
25
PRL150YB-*
1.50"
1.88"H x 1.38"W
Yellow on Black
25
PRL250YB-*
2.50"
2.88"H x 1.75"W
Yellow on Black
25
How to Order:
Part No.
Character
Height
Label Size
Markers/
Card
Cards/
Pkg.
Total
Markers
PVL100BY-*-Y
1"
1.5"H x 0.88"W
10
25
250
PVL200BY-*-Y
2"
2.25"H x 0.88"W
10
25
250
How to Order:
1

Refer to Part Number (No.):
1" – PVL100BY-*-Y
2

Specify Character Legend A thru Z, 0 thru 9, – (dash)
for Asterisk (*): PVL100BY-A-Y
1

Refer to Part Number (No.):
1" – PRL100BY-*
2

Specify Character Legend A thru Z, 0 thru 9, – (dash)
for Asterisk (*): PRL100BY-A
Consecutive Letter and Number Marker Sets
Part No.
Series
Character
Height
Marker Size
Color Character
on Background
Markers/
Card
PRL100BY-18KIT
0 thru 9,
A thru D,
L, P, R, S
1"
1.63"H x 1"W
Black on Yellow
900
PRL100BY-36KIT
0 thru 9,
A thru Z
1"
1.63"H x 1"W
Black on Yellow
950
30
Safety Signs & Labels ANSI ISO Safety Signs
Men
working
above.
10" x 14"
D4107
10" x 14"
D4105
10" x 14"
D5107
10" x 14"
D5113
10" x 14"
D4104
10" x 14"
D4108
10" x 14"
D4009
10" x 14"
D4081
10" x 14"
D4113
10" x 14"
W4303
10" x 14"
W4307
10" x 14"
W4308
10" x 14"
C4647
10" x 14"
C4644
10" x 14"
C4603
10" x 14"
C5643
EMERGENCY
EMERGENCY
10" x 14"
B4913
10" x 14"
B7226
Look out
for forklifts.
10" x 14"
W4312
10" x 14"
W4305
10" x 14"
N4809
10" x 14"
N4805
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
Codes
PVS
PLVS
PRS
PAS
10" x 14"
N4825
Available Size
10" x 14"
Code
1014
10" x 14"
B4509
How to Order Signs:
1

3

2

4

Select Material Code:
PVS
Select Sign Base Part Number:
D4107
Select Size Code:
1014
Combine Codes in Specific Order
for Complete Part Number: PVS1014D4107
ISO Warning Labels
Use internationally recognized symbols to warn and identify of hazards.
• International Organization for Standardization (ISO) labels communicate safety without words
• Warning-shaped triangles with symbols to communicate hazard message
• Made of self-adhesive vinyl with durable overlaminate
• 2" labels available in packs of 10
• 4" labels available in packs of 5
Available Material
Polyester Laminated Vinyl
Code
PLVS
How to Order Labels:

3
Select Label Base
Part Number: W3112
1

4

Available Sizes
2" (Pkg. of 10)
4" (Pkg. of 5)
Select Material Code:
PLVS
2

W3112
General Warning Hazard
W3152
Crush Hazard
W3153
Pinch Point Hazard
W3154
Belt Drive Entanglement
Hazard
Codes
0202
0404
Select Size Code:
0202
Combine Codes in Specific Order
for Complete Part Number: PLVS0202W3112
W3156
Gear Entanglement Hazard
W3158
Cut or Sever Hazard
W3186
Electric Voltage Hazard
W3198
Heated/Hot Surface Hazard
Safety Signs & Labels
800.777.3300 | Panduit.com
31
Glow Clear-Shield Signs
Contemporary Clear-Shield
signs look good in regular
light and perform in the dark.
3" x 9"
PSSG4012
•Architectural-style signs for
the office as well as industrial
environments
•Printed on
photoluminescent film
•Can be seen when
power goes out
•Sub-surface protected
from top wear
•Mounts with double-sided
adhesive foam tape (included)
6" x 9"
PSSG4024
6" x 9"
PSSG4033
6" x 9"
PSSG4021
9" x 6"
PSSG4721
6" x 9"
PSSG4025
9" x 6"
PSSG4032
9" x 6"
PSSG4031
3" x 9"
PSSG4016
3" x 9"
PSSG4018
9" x 6"
PSSG4029
9" x 6"
PSSG4751
9" x 6"
PSSG4039
9" x 6"
PSSG4036
6" x 9"
PSSG4023
Glow Signs
Severe Weather Signs
7" x 10" 10" x 14"
B7323
Exit & Emergency Signs
7" x 10" 10" x 14"
B7324
10" x 7" 14" x 10"
B7325
10" x 7" 14" x 10"
B7326
10" x 14"
B5579
10" x 14"
B4579
7" x 10" 10" x 14"
B7327
Fire Signs
10" x 14"
B4534
7" x 10" 10" x 14"
B7328
7" x 10" 10" x 14"
B7330
7" x 10" 10" x 14"
B7329
10" x 7" 14" x 10"
B7331
10" x 14"
B4504
10" x 14"
B4536
7" x 10" 10" x 14"
B7332
Available Materials
Glow Adhesive (Each)
Glow Plastic (Each)
18" x 4"
B4510
Codes
PVSG
PRSG
18" x 4"
B4507
Available Sizes
7" x 10"
7" x 14"
10" x 7"
10" x 14"
Codes
0710
0714
1007
1014
12" x 4" 18" x 4" 24" x 4"
B7333
Available Sizes
14" x 10"
12" x 4"
18" x 4"
24" x 4"
Codes
1410
1204
1804
2404
7" x 14"
B4515
7" x 14"
B4516
14" x 10"
B3508
14" x 10"
B3509
How to Order Signs:
1

3

Select Material Code:
PVSG
Select Label Sign
Part Number: B4515
2

4

Select Size Code:
0714
Combine Codes in Specific Order for
Complete Part Number: PVSG0714B4515
7" x 14"
B4549
32
Safety Signs & Labels Projecting Signs
When you need identification, location and direction, signs can be seen from various angles for extra visibility.
Hang signs along hallways, stairways, corridors, and doorways. Projecting Signs are 0.100" thick high-impact plastic with images on the two panels that are covered by a UV
protective coating. Flanged edges have pre-drilled mounting holes. Wall mount with screws or self-adhesive foam tape (both included).
3D Signs
90D Signs
Project 45° from the wall, provide optimum viewing from the front and sides
Project 90° from the wall, are viewed from either side
3D - 8" x 12" Panel
PSS3P4034
90D - 8" x 12" Panel
PSS9P4034
3D - 18" x 4" Panel
90D - 18" x 4" Panel
3D - 8" x 12" Panel
PSS3P4036
90D - 8" x 12" Panel
PSS9P4036
PSS3P4029
PSS9P4029
3D - 6" x 5" Panel
PSS3P4021
90D - 8" x 8" Panel
PSS9P4021
3D - 12" x 9" Panel
PSS3P4392
90D - 12" x 9" Panel
PSS9P4392
3D - 6" x 5" Panel
PSS3P4049
90D - 8" x 8" Panel
PSS9P4049
3D - 6" x 5" Panel
PSS3P4006
90D - 8" x 8" Panel
PSS9P4006
3D - 18" x 4" Panel PSS3P4016M
90D - 18" x 4" Panel PSS9P4016M
3D - 24" x 4" Panel
90D - 24" x 4" Panel
PSS3P4026
PSS9P4026
3D - 6" x 5" Panel
PSS3P4019
90D - 8" x 8" Panel
PSS9P4019
3D - 6" x 5" Panel
PSS3P4014
90D - 8" x 8" Panel
PSS9P4014
3D - 6" x 5" Panel
PSS3P4037
90D - 8" x 8" Panel
PSS9P4037
Safety Signs & Labels
800.777.3300 | Panduit.com
3D - 6" x 5" Panel
PSS3P4008
90D - 8" x 8" Panel
PSS9P4008
3D - 18" x 4" Panel
90D - 18" x 4" Panel
33
3D - 12" x 9" Panel
PSS3P4658
90D - 12" x 9" Panel
PSS9P4658
3D - 6" x 5" Panel
PSS3P4062
90D - 8" x 8" Panel
PSS9P4062
PSS3P4069
PSS9P4069
3D - 6" x 5" Panel
PSS3P4010
90D - 8" x 8" Panel
PSS9P4010
3D - 6" x 5" Panel
PSS3P4011
90D - 8" x 8" Panel
PSS9P4011
3D - 6" x 5" Panel
PSS3P4002
90D - 8" x 8" Panel
PSS9P4002
3D - 18" x 4" Panel
90D - 18" x 4" Panel
3D - 6" x 5" Panel
PSS3P4042
90D - 8" x 8" Panel
PSS9P4042
3D - 6" x 5" Panel
PSS3P4053
90D - 8" x 8" Panel
PSS9P4053
3D - 12" x 9" Panel
PSS3P4443
90D - 12" x 9" Panel
PSS9P4443
3D - 12" x 9" Panel
PSS3P4444
90D - 12" x 9" Panel
PSS9P4444
3D - 8" x 12" Panel
PSS3P4058
90D - 8" x 12" Panel
PSS9P4058
3D - 6" x 5" Panel
PSS3P4081
90D - 8" x 8" Panel
PSS9P4081
3D - 6" x 5" Panel
PSS3P4047
90D - 8" x 8" Panel
PSS9P4047
3D - 6" x 5" Panel
PSS3P4055
90D - 8" x 8" Panel
PSS9P4055
3D - 8" x 12" Panel
PSS3P4087
90D - 8" x 12" Panel
PSS9P4087
3D - 8" x 12" Panel
PSS3P4071
90D - 8" x 12" Panel
PSS9P4071
PSS3P4070
PSS9P4070
*SDS - Safety Data Sheets
3D - 6" x 5" Panel
PSS3P4035
90D - 8" x 8" Panel
PSS9P4035
3D - 6" x 5" Panel
PSS3P4023
90D - 8" x 8" Panel
PSS9P4023
Panel Size
3D Projection Overall Size
90D Projection Overall Size
Panel Size
3D Projection Overall Size
90D Projection Overall Size
6" x 5"
6" x 8 1/2" x 4"
—
18" x 4"
18" x 7 1/2" x 3"
18" x 4" x 1 1/2"
8" x 8"
—
8" x 8" x 1 1/2"
12" x 9"
12" x 14" x 7"
12" x 9" x 1 1/2"
8" x 12"
8" x 18" x 9"
8" x 12" x 1 1/2"
24" x 4"
24" x 7 1/2" x 3"
24" x 4" x 1 1/2"
34
Safety Signs & Labels Sign Panels – Blank Space for Custom Messages
Sub-Surface Printed Adhesive Polyester (Type PPS):
Rigid Polyethylene (Type PRS):
• High quality signs for use indoors and outdoors
• Excellent resistance to UV light, chemical atmosphere and abrasion
• Excellent life and adhesion properties
• Printed graphics are protected by clear polyester laminate
• Temperature Range: -40° to 275°F
• Rugged signs for indoors and outdoors
• Abrasion resistant
• Used where adhesives will not work
• Can be used with Panduit Thermal Transfer Desktop Printers and Easy-Mark™
Labeling Software to create your own custom signs
• Print your own legend on clear polyester tape with the TDP43ME Thermal Transfer
Desktop Printer and adhere label to adhesive or non-adhesive sign panel
• Can also be used with Panduit Die Cut Letter and Numbers
• Temperature Range: -105° to 250°F
7" x 10" 10" x 14" 14" x 20"
BWHT
Available Materials
Printed Adhesive Polyester (Each)
Rigid Polyethylene (Each)
7" x 10" 10" x 14" 14" x 20"
BYEL
Codes
PPS
PRS
Available Sizes
7" x 10"
10" x 14"
14" x 20"
7" x 10" 10" x 14" 14" x 20"
C442
Codes
0710
1014
1420
Laser Printable Adhesive Signs
7" x 10" 10" x 14" 14" x 20"
D440
7" x 10" 10" x 14" 14" x 20"
N443
How to Order Signs:
1

3

Select Material Code:
PPS
Select Sign Base Part Number:
D440
2

4

Select Size Code:
0710
Combine Codes in Specific Order
for Complete Part Number: PPS0710D440
Self-Laminating Adhesive Sign Carriers
• Signs can be printed with a standard laser printer
• Indoor polyolefin pressure sensitive signs with square corners on stay-flat liner
• 25 signs per package
• Indoor/outdoor rated for resistance
to UV light, chemical atmosphere
and abrasion
• Excellent for applications where
adhesives will not work
• Temperature Range: -40° to 150°F
• 5 carriers/pkg.
Part No.
Size
Adhesive
SEZ-SNC1
6"H x 7"W
SEZ-SNC2
7"H x 10.5"W
SEZ-SNC3
6"H x 12"W
SEZ-SNC4
9.5"H x 12"W
Non-Adhesive
8 1/2" x 11"
SEZ-1CLL
8 1/2" x 11"
SEZ-1WLL
8 1/2" x 11"
SEZ-1DLL
8 1/2" x 11"
SEZ-1WHLL
8 1/2" x 11"
SEZ-1NLL
8 1/2" x 11"
SEZ-1YLL
SEZ-RSC1
6"H x 7"W
SEZ-RSC2
7"H x 10.5"W
SEZ-RSC3
9.5"H x 12"W
SEZ-RSC4
6"H x 12"W
Safety Tags
800.777.3300 | Panduit.com
Safety Tags
Our selection of safety tags is just as
diverse as your workplace.
•Prevent the potential for accidental injury and property damage
•Alert, call out or draw attention to temporary hazards
•Required critical tool in safety, performance and
maintenance operations
We Have What You Need
Look to us for the tags that you need! In addition to standard
OSHA safety tags, our comprehensive selection of safety tags
incorporates key categories like Lockout/Tagout, Equipment
Status and Record Inspection.
35
Safety Tags Identify Temporary Hazards
Safety Tags...
•Call out attention to hazards
•Prevent the potential for accidental injury or property damage
•Identify and inform that a hazardous condition exists
Attach and hang the tags as close as possible to the hazard situation where the tag can be readily seen.
Tags are to remain in-place until the hazard is eliminated or the hazardous operation is complete.
The Occupational Safety and Health Administration (OSHA 29 CFR §1910.145) and American National
Standards Institute (ANSI Z535) provide specifications, designs, applications, and uses of accident
prevention tags. Tags can be printed in a variety of colors and messages to meet your needs. They are
typically designed with an attention-getting signal word for a degree of hazard along with a specific
message and areas to write in particular information.
Safety tags are an inexpensive, fast solution for temporary marking and identification of hazards.
Note: A tag shall not be used in place of a permanent sign or label for hazards in normal use,
operation or maintenance.
Choose the Right Tag Material
Select a material based on your application requirements to ensure your message is conveyed clearly and effectively.
Poly Cardstock (PCT)
Rigid Plastic (PVT)
Pulp-free tags have no wood pulp or paper content, unlike standard
cardstock tags, and are available at an economical price.
High-strength rigid plastic tag is ideal for use in tough industrial
environments – resists chemicals, tears, and abrasions.
Material Features
• Thin, pliable 0.010" poly-based
tags will not crack, distort,
or shrink
• Waterproof and tear-resistant
from incidental pulls and snags
• Can be printed on both sides
• Scuff-resistant matte surface
is easy to write on with pen
or marker
• 3/8" non-reinforced hole
Applications
•Indoor usage
•Non-reinforceable hole
Material Features
• 0.015" thick rigid plastic tags are
relatively bendable
• Matte surface is easy to write on
with pen or marker
• Can be printed on both sides
• 3/8" hole, reinforced by a
pull-proof metal grommet
Applications
• Indoor and temporary
outdoor usage
• Chemical and dirty/greasy
environments
• 2 years outdoors
3/8" Hole
0.010"
Pulp-Free
Cardstock
Printed
Message
3/8" Metal
Grommet Hole
0.015"
Plastic
Printed
Message
Laminate Plastic (PCTL)
Self-Laminating Tags
Nearly indestructible tag is made to withstand tough,
abusive conditions.
Protect written messages and photos when your life is on the line.
Material Features
• 0.010" cardstock tag
sealed by a thick, 0.007"
laminate on both sides – right
to the edges – to protect the
printed image
• Tear-proof, weatherproof and
chemical-resistant
• Durable to withstand dirt,
grease, liquid splashes and
rough handling
• Scratch-resistant matte-finish
laminate surface is easy to
write on with pen or marker
• 3/8" hole, reinforced by a
pull-proof metal grommet
• Available in Lockout Tags
Applications
• Indoor and outdoor usage - when the most durable tags are required
• Chemical applications and tough industrial settings
3/8" Metal
Grommet Hole
0.010"
Cardstock
Tag
Printed
Message
0.007"
Laminate
Both Sides
• Write information and insert a
photo (where applicable),
then laminate your own tag
• Protection from moisture,
chemicals and dirt
• Prevents tampering with
the information
• Dual self-laminating polyester
flaps pre-attached at the top
• Reinforced by a pull-proof
metal grommet
3/8" Hole
Protected
Printed
Image
0.010"
Overlaminate
Flap Both
Sides
Safety Tags
36
Standard Safety Tags
Back A
Back B
1006
1023
Back A
Back B
1011
1016
Back A
Back B
1004
1017
Back A
Back B
1002
1026
Back A
Back B
1005
1018
Back A
Back B
1007
1022
Back A
Back B
1003
1020
Back A
Back B
1014
1021
Back A
Back B
1012
1024
Back A
Back B
1009
1025
Back A
Back B
1008
1019
Back A
Back B
1010
1015
Back A
Back B
1034
1038
Back A
Back B
1036
1040
Choose from
two back
message
styles, noted
under each
part number
as A and B.
Back A
Back B
1035
1039
Back A
Back B
1001
1042
Back A
Back B
1037
1041
STANDARD BACK A
STANDARD BACK B
Blank Header Tags
Back
Front
1027
Back
Front
1064
Back
Front
1043
Front
Back
1061
Safety Tags
800.777.3300 | Panduit.com
37
Bilingual Spanish Safety Tags
1126
1125
1063
1151
1127
1153
1152
STD BILINGUAL
BACK
Inspection & Status Record Tags
Front
Back
Front
1148
Front
Back
Front
1131
Front
Back
Front
Back
Front
1130
Back
Front
1133
Available Materials
Poly Cardstock
Rigid Plastic
Front
Back
Back
Front
Available Packages
Pk. of 5
Pk. of 25
Back
Front
1128
Front
1136
1132
Codes
PCTPVT-
Back
1048
1047
Back
1117
Back
1134
Front
Back
1137
Back
1138
Codes
(blank)
-Q
How to Order Tags:
1

3

Select Material Code:
PCTSelect Package:
5/Pk – (blank); 25/Pk – -Q
2

4

Select Tag Base Part Number:
1011
Combine Codes in Specific Order for Complete
Part Number: 5/Pk – PCT-1011; 25/Pk – PCT-1011-Q
38
Safety Tags
Status Tags
Scaffold Tags
Front
Back
Front
1143
Back
Front
1155
Back
Front
1154
Back
Front
1156
Back
1139
Barricade Tags
Front
Back
Front
1142
Back
Front
1140
Front
Back
Back
Front
1066
1141
Back
1067
Forklift Tags
BY
Front
Back
Front
1065
Front
Back
Back
Front
1146
1068
Back
Front
Back
1145
1135
Cylinder Tags
Front
Back
Front
1046
Back
Front
1050
Back
Front
1044
Back
Front
1045
Back
1049
Ladder Tags
Available Materials
Poly Cardstock
Rigid Plastic
Codes
PCTPVT-
Available Packages
Pk. of 5
Pk. of 25
Codes
(blank)
-Q
How to Order Tags:
Front
Back
1144
Front
Back
1013
Front
Back
1147
1

3

Select Material Code:
PCTSelect Package:
5/Pk – (blank); 25/Pk – -Q
2

4

Select Tag Base Part Number:
1050
Combine Codes in Specific Order for Complete
Part Number: 5/Pk – PCT-1050; 25/Pk – PCT-1050-Q
Safety Tags
800.777.3300 | Panduit.com
39
Lockout Tags
1051
1054
1052
1053
1056
1055
1057
STD LOCKOUT BACK
1150
STD BILINGUAL
LOCKOUT BACK
Available Materials
Poly Cardstock
Rigid Plastic
Laminate Plastic (Pk. of 5)
Codes
PCTPVTPCTL-
Available Packages
Pk. of 5
Pk. of 25
Codes
(blank)
-Q
How to Order Tags:
1

3

Select Material Code:
PCTSelect Package:
5/Pk – (blank); 25/Pk – -Q
2

4

Select Tag Base Part Number:
1051
Combine Codes in Specific Order for Complete
Part Number: 5/Pk – PCT-1051; 25/Pk – PCT-1051-Q
Self-Laminating Lockout Tags
Back
Front
Available Materials
Poly Cardstock
Rigid Plastic
Back
Front
1060
Codes
PSCTPST-
Available Packages
Pk. of 5
Pk. of 25
Back
Front
1058
1059
Codes
(blank)
-Q
How to Order Tags:
1

3

Select Material Code:
PSCTSelect Package:
5/Pk – (blank); 25/Pk – -Q
2

4

Select Tag Base Part Number:
1060
Combine Codes in Specific Order for Complete
Part Number: 5/Pk – PSCT-1060; 25/Pk – PSCT-1060-Q
40
Safety Tags
Tag Holder Systems
Insert, enclose and contain your status alert tags in a
secure tag holder system.
•Mount durable plastic holder and insert tag to display alert status
•Default “DO NOT USE” message shows when no tag is inserted
•Available in two styles:
(A) Secure-Status – Durable plastic holder measures
10"H x 3 1/2"W x 3/8" overall with 5 1/2"H x 2 3/4"”W clear view
front window. Upper jaws close to fit onto post rails or poles up to
2 3/8" diameter or through any 1/2" opening to lock out a device.
Accommodates up to four padlocks (sold separately).
(B) Status Alert – Durable 0.060" thick plastic holder measures
12"H x 4 1/2"W overall with a 2 3/4" diameter opening at top.
Insert tag into the 5 1/2"H x 4 1/2"W clear polycarbonate plastic
front pocket, secure with nylon tie (sold separately) and mount in
a visible location with large opening at the top.
(A)
(B)
(A) Secure-Status Holder
PT-1164
PT-1162
PT-1165
PT-1163
PT-1158
PT-1161
PT-1159
(B) Status Alert Holder
PT-1160
Safety Tags
800.777.3300 | Panduit.com
41
Roll of Tags
Portable Dispenser Roll for your On-The-Go Needs
•Keep a large quantity of tags readily available
•Tags are connected end-to-end with perforations, and housed
in an convenient cardboard dispenser
•Dispenser box measures 6 5/8"H x 6 5/8"W x 3 5/8"D
•Box features 1 1/2" perforated center hole for mounting
•Poly Cardstock tags are tear- and water-resistant
•Tags measure 6 1/4"H x 3"W, with 3/8" hole
•Writable matte surface, printed on both sides with space to
sign, date and add notes
•Available in 100 and 250 tags per roll
STANDARD BACK
STD. LOCKOUT BACK
General Safety Tags
100/Roll
250/Roll
PCT-1077-C
PCT-1086-B
100/Roll
250/Roll
PCT-1078-C
PCT-1081-B
100/Roll
250/Roll
PCT-1080-C
PCT-1087-B
100/Roll
250/Roll
PCT-1093-C
PCT-1096-B
100/Roll
250/Roll
PCT-1083-C
PCT-1088-B
100/Roll
250/Roll
PCT-1084-C
PCT-1089-B
Lockout Tags
100/Roll
250/Roll
PCT-1085-C
PCT-1090-B
100/Roll
250/Roll
PCT-1079-C
PCT-1082-B
100/Roll
250/Roll
PCT-1091-C
PCT-1098-B
100/Roll
250/Roll
PCT-1092-C
PCT-1099-B
100/Roll
250/Roll
PCT-1094-C
PCT-1097-B
100/Roll
250/Roll
PCT-1095-C
PCT-1100-B
Thick Plastic Tags
This tag can take the abuse of the harshest industrial environment. It’s thick,
tough, and rigid to withstand tugging, pulling, twisting and bending.
•Made of tough recycled polycarbonate
•Relief text increases visibility
•Double-sided
•Polycarbonate plastic resists most corrosive environments
•Write on these tags with permanent marker
•3/8" hole without grommet meets dielectric requirements
•Measures 5 7/16" x 3 1/16" x 1/8"
•Available in packages of 5 and 25
Pkg/5
Pkg/25
PVT-1062
PVT-1062-Q
Pkg/5
Pkg/25
PVT-1162
PVT-1162-Q
STANDARD BACK
Safety Tags
42
Scaffold Status 3 ‘n 1 Fold Tag
Loop Strap Tags
Quickly and conveniently change the safety status of your
scaffold with our 3 ‘n 1 Fold Tag.
• Display DANGER, CAUTION or ATTENTION messages all from the same
tag with a simple fold
• Ideal for use with Secure-Status or Status Alert Holder (sold separately)
• Front and back display the same color with related info
• Folded tag size: 5 3/4" x 3 1/4". Unfolded size: 11 1/2" x 6 1/2"
• Available in Poly Cardstock (PCT) or Rigid Plastic (PVT)
in packs of 5 or 25
Attach tags by the
self-fastening strap for
quick marking of hazards.
•Hangs on its own strap by looping
the vertical strap around itself
•Flexible 0.014" polyethylene plastic
•5 1/4" x 3 1/4" tag body with the
strap being 1 3/8"W x 6"L x 7/16"
wide opening
•Resists grease, dirt, and moisture
•Message is printed on one
side only
•Can be written on with
permanent marker
•Available in packs of 25
Simply fold tag to display appropriate message. When status changes
remove tag from holder and unfold to change message. Shown with
Secure-Status Holder.
Material
Part No.
UOM
Part No.
UOM
Poly Cardstock
PCT-1157
Pkg. of 5
PCT-1157-Q
Pkg. of 25
Rigid Plastic
PVT-1157
Pkg. of 5
PVT-1157-Q
Pkg. of 25
PVT-1072-Q
PVT-1073-Q
PVT-1074-Q
PVT-1069-Q
PVT-1070-Q
PVT-1071-Q
PVT-1075-Q
PVT-1076-Q
Aluminum Inspection Record Tag
•Four-year aluminum tag
is made to withstand the
inspection period
•0.020" Aluminum
•Pack of 5
2016
2017
2018
2019
Meets OSHA 29 CFR
§1910.157(e)
Start Year
2016
PT-1129
Safety Tags
800.777.3300 | Panduit.com
Blank Tags
Blank tags allow you to write any message in pen, pencil or marker. Use for coding, marking, quick identification, production status or inventory.
Standard Color Blank
Cardstock Tags
Manila Cardstock Tags
•0.0013" tags with patch-reinforced 3/16" hole
•Pack of 100
Part No.
Size
Size No.
•0.0013" coated tags
with patch-reinforced
3/16" hole
•Pack of 100
Hole Only
PCT-1101-C
4 3/4" x 2 3/8"
5
PCT-1102-C
5 1/4" x 2 5/8"
6
PCT-1103-C
6 1/4" x 3 1/8"
8
To Order:
Add color code after part number: Blue – B-C, Green – G-C, Red – R-C,
White – W-C, Yellow – Y-C.
Example: Part No. PCT-1107 + Color Code B-C = PCT-1107B-C
Hole with 12" Galvanized Steel Wire
PCT-1104-C
4 3/4" x 2 3/8"
5
PCT-1105-C
5 1/4" x 2 5/8"
6
PCT-1106-C
6 1/4" x 3 1/8"
8
Part No.
Size
Size No.
Plain - with Hole Only
Premium Blank Tags
PCT-1107
4 3/4" x 2 3/8"
5
PCT-1108
5 1/4" x 2 5/8"
6
PCT-1109
6 1/4" x 3 1/8"
8
PCT-1110
4 3/4" x 2 3/8"
5
PCT-1111
5 1/4" x 2 5/8"
6
PCT-1112
6 1/4" x 3 1/8"
8
Hole with 12" Steel Wire
White Tyvek® Tags
1028
1029
1031
1030
Available Materials
Poly Cardstock
Rigid Plastic
Self-Laminating Poly Cardstock
Self-Laminating Rigid Plastic
Codes
PCTPVTPSCTPST-
1032
Available Packages
Pk. of 5
Pk. of 25
1033
Codes
(blank)
-Q
Select Material Code:
PCTSelect Package:
5/Pk – (blank); 25/Pk – -Q
2

4

Part No.
Size
Size No.
PCT-1225-C
4 3/4" x 2 3/8"
5
PCT-1114-C
6 1/4" x 3 1/8"
8
Hole Only
How to Order Tags:
1

3

•Lightweight, pressure-bonded fibers
•Flexible 0.075" thick material is abrasion- and tear-resistant
•Withstands moisture, chemicals, and frequent handling
•Patch- and metal-reinforced 3/16" hole is available plain or
looped with 12" galvanized steel wire
•Pack of 100
Hole with Galvanized Steel Wire
Select Tag Base Part Number:
1030
Combine Codes in Specific Order for Complete
Part Number: 5/Pk – PCT-1030; 25/Pk – PCT-1030-Q
Self-Laminating Safety Tag Carriers
PCT-1115-C
4 3/4" x 2 3/8"
5
PCT-1116-C
6 1/4" x 3 1/8"
8
Tyvek is a registered trademark of DuPont™
®
Create Your Own Cardstock Tags
•Cut out paper to fit and insert into the
self-laminating carrier allows tags to be
resistant to mild chemicals and acids
•Sturdy brass grommet provides
extra durability
•Panduit PLT2S (7.40") nylon ties included
for quick and easy installation
•Meet OSHA Standard 1910.147 for lockout
tag 50 lb. pull force requirement
•Create your own economical cardstock
tags on ink jet printers
•Economical solution for temporary,
indoor tags
•Cardstock is semi-rigid tag with
perforation for easy tag separation and
punched hole for hanging
•Tags measure 3" x 5"
•4 tags/sheet; 25 sheets for 100 tags
per package
•Can be used with Self-Laminating Safety
Tag Carrier for extra durability
Part No.
Lamination Style
Tag Size
Pkg. Qty.
Part No.
Color
PST-4
Front only
3.50" x 5.75"
25
SEZ-TAGWH
Red and Black/White
PST-5
Front and back
3.50" x 5.75"
25
SEZ-TAGOR
Red and Black/Orange
PST-1
Front only
3.00" x 2.00"
10
SEZ-TAGY
Red and Black/Yellow
PST-2
Front only
3.25" x 5.75"
5
43
44
Cable Ties & Wire Markers | Cable Ties
Pan-Ty® Cable Ties – Nylon 6.6
• For indoor use
• Versatile locking cable ties can be used in countless applications
• One-piece construction for consistent performance and reliability
• Lowest threading force of any one-piece cable tie in the industry
• Curved tip is easy to pick up from flat surfaces and allows faster
initial threading to speed installation
Part No.
Cross-Section
Size
Length x Width x Thickness
Color
Max. Bundle
Diameter
Min. Loop
Tensile Str.
Recommended Installation Tool
Pkg. Qty.
PLT2H-L
Light-heavy
Natural
8.1" x 0.300" x 0.075"
2"
120 lbs.
GTH-E, GS4H, GS4EH, PTH, STH2, ST3EH
50
PLT1.5I-M
Intermediate
Natural
5.6" x 0.142" x 0.045"
1.38"
40 lbs.
GTS-E, GS2B, PTS, PPTS, STS2
1000
PLT1.5I-M0
Intermediate
Black
5.6" x 0.142" x 0.045"
1.38"
40 lbs.
GTS-E, GS2B, PTS, PPTS, STS2
1000
PLT1.5M-M
Miniature
Natural
5.6" x 0.098" x 0.043"
1.25"
18 lbs.
GTS-E, GS2B, PTS, PPTS, STS2
1000
PLT1.5S-M
Standard
Natural
6.2" x 0.190" x 0.052"
1.5"
50 lbs.
GTS-E, GS2B, GTH-E, PTS, PPTS, PTH, STS2, STH2
1000
PLT1.5S-M0
Standard
Black
6.2" x 0.190" x 0.052"
1.5"
50 lbs.
GTS-E, GS2B, GTH-E, PTS, PPTS, PTH, STS2, STH2
1000
PLT2S-M
Standard
Natural
7.4" x 0.190" x 0.052"
1.88"
50 lbs.
GTS-E, GS2B, GTH-E, GS4H, PTS, PPTS, PTH, STS2, STH2
1000
PLT2S-M0
Standard
Black
7.4" x 0.190" x 0.052"
1.88"
50 lbs.
GTS-E, GS2B, GTH-E, GS4H, PTS, PPTS, PTH, STS2, STH2
1000
PLT3S-M
Standard
Natural
11.5" x 0.190" x 0.052"
3"
50 lbs.
GTS-E, GS2B, GTH-E, GS4H, PTS, PPTS, PTH, STS2, STH2
1000
Pan-Ty® Marker and Flag Ties
• Nylon 6.6 material for indoor use
• Weather resistant material has greater resistance to damage caused by ultraviolet light – indoor or outdoor use
• Flame retardant material has a flammability rating of UL 94V-0 – for indoor use
• Used to fasten and identify bundles at the same time
• One-piece construction for consistent performance and reliability
• Can be marked with Panduit marker pens or computer printable labels
• Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
Part No.
Cross-Section
Color
Marker
Type
Size
Length x Width x Thickness
Marker
Write-On Area
Max. Bundle
Diameter
Min. Loop
Tensile Str.
Recommended
Installation Tool
Pkg. Qty.
100
PLF1M-C
Miniature
Natural
Flag
4.3" x 0.98" x 0.45"
0.31" x 0.75"
0.87"
18 lbs.
GTS-E, GS2B,
PTS, PPTS, STS2
PLM2M-C
Miniature
Natural
Wrap
8" x 0.98" x 0.35"
0.26" x 0.95"
2"
18 lbs.
GTS-E, GS2B,
PTS, PPTS, STS2
100
50 lbs.
GTS-E, GS2B, GTH-E,
GS4H, PTS, PTH,
PPTS, STS2, STH2
100
PLM2S-C
Standard
Natural
Wrap
7.4" x 0.185" x 0.52"
0.44" x 0.87"
1.75"
Pan-Steel® Polyester Fully Coated Cable Ties – MLTFC Series
• Polyester coating available in two color options provides visual indication
for easy identification
• Self-locking head design speeds installation and locks into place at any length
along the tie body
• Heavy cross section
• Polyester coating provides additional edge protection and prevents corrosion
between dissimilar metals
• AISI 316 stainless steel for the most corrosive environments
• UV resistant, low smoke, halogen-free material
• Temperature Range: -40° to 302°F
MLTFC2H-LP316RD
MLTFC2H-LP316BU
Part No.
Color
Size
Length* x Width x Thickness^
Max./Min.
Bundle Diameter
Min. Loop
Tensile Str.
Recommended Installation Tool
MLTFC2H-LP316RD
Red
7.9" x 0.31" x 0.010"
2"/0.5"
250 lbs.
GS4MT, ST2MT HTMT, PPTMT, PBTMT
50
MLTFC2H-LP316BU
Blue
7.9" x 0.31" x 0.010"
2"/0.5"
250 lbs.
GS4MT, ST2MT HTMT, PPTMT, PBTMT
50
*Other lengths available, contact Panduit Customer Service.
^Base material less coating.
Pkg. Qty.
Cable Ties | Cable Ties & Wire Markers
800.777.3300 | Panduit.com
45
Pan-Ty® Locking Cable Ties – Polypropylene – Distinctive Green Color
• For chemical resistance where high loop tensile strength is not required especially in the presence of hydrochloric acid,
salts, and bases
• For indoor use
• Material requires lowering the tool setting (see table below)
• One-piece construction for consistent performance and reliability
• Lowest threading force of any one-piece cable tie in the industry
• Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
Part No.
Cross-Section
Color
Size
Length x Width x Thickness
Max. Bundle
Diameter
Min. Loop
Tensile Str.
Recommended Installation Tool
Tool Setting
Pkg. Qty.
PLT1M-M109
Miniature
Green
3.9" x 0.098" x 0.043"
0.87"
11 lbs.
GTS-E, GS2B, PTS, PPTS, STS2
2
1000
Pan-Ty® Releasable Cable Ties – Nylon 6.6
• For indoor use
• Extended release tab permits easy release and re-use where changes are anticipated during development,
production, or servicing in the field
• One-piece construction for consistent performance and reliability
• Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
• UL Listed for use in plenum or air handling spaces per NEC
Part No.
Cross-Section
Color
Size
Length x Width x Thickness
Max. Bundle
Diameter
Min. Loop
Tensile Str.
Recommended Installation Tool
Pkg. Qty.
PRT2S-C
Standard
Natural
7.4" x 0.190" x 0.52"
1.88"
50 lbs.
Hand install only
100
Pan-Ty® Clamp Ties – Nylon 6.6
• For indoor use
• Used to secure a cable bundle to another surface such as a control panel, communication rack, wall or ceiling
• Design allows for bundling before or after screwing clamp in place
• One-piece construction for consistent performance and reliability
• Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
• UL Listed for use in plenum or air handling spaces per NEC
PLC1M-S4-C
Part No.
Cross-Section
Color
Size
Length x Width x Thickness
Nominal
Hole Dia.
Screw
Size
Metric
Screw Size
Max. Bundle
Diameter
Min. Loop
Tensile Str.
Recommended
Installation Tool
Pkg. Qty.
PLC1M-S4-C
Miniature
Natural
4.3" x 0.100" x 0.45"
0.122"
#4
M2.5
0.75"
18 lbs.
GTS-E, GS2B,
PTS, PPTS, STS2
100
PLC2S-S6-C
Standard
Natural
7.9" x 0.190" x 0.47"
0.148"
#6
M3
1.84"
50 lbs.
GTS-E, GS2B, GTH-E,
GS4H, PTS, PTH, PPTS,
STS2, STH2
100
Cable Ties & Wire Markers | Cable Ties
46
Cable Tie Tools – Tool Controlled Tension and Cut-Off
Mounts, Plates and Spacers
• Use in production, maintenance, or construction applications
• Tool controls tension provides flush cut-off and speeds installation to lower installed cost
• Lightweight and balanced
• Easy to change tension adjustment and easy to operate
• A combination of design, operation, and construction features, provides a long service life
• No special maintenance required
• Ergonomic design lowers the risk of repetitive motion injuries
• Lowest activation and impact to installer’s hand
We carry mounts, plates and spacers.
Go to www.panduit.com for our full offering.
GTS-E
GTH-E
Use with
Cable Ties
Part No.
Weight
GTS-E
9.8 oz.
SM, M, I, S
GTH-E
12 oz.
S, HS, LH, H
4-Way Adhesive Backed Cable Tie Mounts
• Allows cable tie entry from all four sides
• Available in multiple sizes to match application load requirements
• Provides 2-up for fast and easy liner removal to speed installation
Rubber Adhesive
• General purpose
• Fast strength adhesion dwell time 2 hours after installation, prior to loading
• Temperature Range: -20° to 120°F
Acrylic Adhesive
• For high temperature locations and exposure to UV rays
• Maximum adhesive strength after 8 hours dwell time, prior to loading
• Temperature Range: -20° to 180°F
Part No.
Size
Length x Width x Thickness
Material
Color
Environment
Adhesive
Mounting Method
Used with Cable Ties*
Pkg. Qty.
ABMM-A-C
0.75" x 0.75" x 0.18"
ABS
White
Indoors
Rubber
M, I
100
ABMM-AT-C0
0.75" x 0.75" x 0.18"
Weather Resistant ABS
Black
Outdoors/HighTemp
Acrylic
M, I
100
ABM2S-A-C
1.00" x 1.00" x 0.16"
ABS
White
Indoors
Rubber
M, I, S
100
ABM2S-AT-C0
1.00" x 1.00" x 0.16"
Weather Resistant ABS
Black
Outdoors/HighTemp
Acrylic
M, I, S
100
ABM112-A-C
1.12" x 1.12" x 0.16"
Nylon 6.6
White
Indoors
Rubber
M, I, S
100
ABM112-AT-C0
1.12" x 1.12" x 0.16"
Weather Resistant Nylon 6.6
Black
Outdoors/HighTemp
Acrylic
M, I, S
100
ABM3H-A-L
1.50" x 1.50" x 0.25"
Nylon 6.6
White
Indoors
Rubber
M, I, S, HS, LH, H, HLM
50
ABM3H-AT-L
1.50" x 1.50" x 0.25"
Nylon 6.6
White
Indoors/HighTemp
Acrylic
M, I, S, HS, LH, H, HLM
50
ABM4H-A-L
2.00" x 2.00" x 0.25"
Nylon 6.6
White
Indoors
Rubber
M, I, S, HS, LH, H, HLM
50
ABM4H-AT-L
2.00" x 2.00" x 0.25"
Nylon 6.6
White
Indoors/HighTemp
Acrylic
M, I, S, HS, LH, H, HLM
50
*Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy, and H = Heavy, HLM = Miniature Tak-Ty Hook & Loop Ties.
®
Cable Ties | Cable Ties & Wire Markers
800.777.3300 | Panduit.com
Adhesive Backed Latching Wire Clips
47
Bevel Entry Clips
• Route and secure cords
and cables
• Convenient releasable latch
• Available in three sizes with
releasable latch
• For indoor use only
• Gray Color Nylon 6.6*
• Rubber adhesive
• Beveled entry allows for easy insertion of
cable bundle
• Natural Color Nylon 6.6
• For indoor use only
• Rubber adhesive
• 50/Pkg.
Part No.
Size
Max. Bundle
Diameter
Pkg. Qty.
Part No.
Size
Max. Bundle Diameter
LWC38-A-C
1"L x 1"W x 0.56"H
0.38"
100
BEC38-A-L
1.46"L x 1.24"W x 0.52"H
0.38"
LWC50-A-L
1.26"L x 1"W x 0.67"H
0.50"
50
BEC62-A-L
1.46"L x 1.24"W x 0.79"H
0.62"
LWC75-A-L
1.48"L x 1.24"W x 0.9"H
0.75"
50
BEC75-A-L
1.46"L x 1.49"W x 0.89"H
0.75"
*Go to panduit.com for full product offering. Gray wire clips pictured.
Clincher™ Adjustable Releasable Clamp
• Adjustable clamp designed to contain
a range of cable bundle diameters
• Latch can be released to provide
access to cable bundles
• For indoor use only
• Material: Polypropylene
• Bundle Diameter Range: 0.19"-0.68"
• Rubber adhesive:
General purpose choice with fast
strength adhesion dwell time of 2 hours
after installation, prior to loading.
Temperature range: -20° to 120°F
• Gray
• 25/Pkg.
Adhesive Backed Cord Clips
• Cables are easily snapped
into or out of the clips
• Natural Color Nylon 6.6
• Rubber adhesive
• 100/Pkg.
No. ARC.68-A-Q14
Part No.
Size
Max. Bundle Diameter
ACC19-A-C
0.75"W x 0.62"L x 0.25"H
0.19"
ACC38-A-C
1.00"W x 1.00"L x 0.38"H
0.38"
ACC62-A-C
1.24"W x 1.12"L x 0.63"H
0.62"
Pan-Steel® Strapping – MS Series
• Fold over design provides high-retained tension in mechanical fastening and cable bundling applications
• Can be used in a wide range of indoor, outdoor, and underground (including direct burial) applications
• Smooth surfaces and rounded edges assures cable protection and worker safety
• AISI 201 stainless steel for general-purpose applications
• AISI 316 stainless steel for the most corrosive environments
• After tensioning, cut end is locked inside with low profile buckle – no sharp edges
• Recommended installation tool – BT75SDT
Part No.
Description
Size
Length* x Width x Thickness
Max./Min
Bundle Diameter
Strap Breaking
Strength
Pkg.
Qty.
MS4W75T30-Q2
Stainless steel strapping,
201 AISI stainless steel
20.2"L x 0.75"W x 0.030"T
4"/1"
2400 lbs.
25
MSW75T30-CR6
Custom length stainless steel strapping,
AISI 316 stainless steel
100-ft. L x 0.75"W x 0.030"T
–/1"
2400 lbs.
1 Roll
MSBW75-C6
Individual buckles use with custom
length strapping, AISI 316 (0.75" width)
1.31"L x 1.64"W x 0.070"T
–/1"
–
100
*Other lengths available, contact Panduit Customer Service.
Hand Operated Installation Tool for MS Series Strapping
• Screw drive tension mechanism provides high tension with minimal effort, reducing
operator fatigue
• Heavy duty construction offers a longer service life
• Allows quick side entry of the strap into tool to speed installation
• For use with 0.75" width strapping only
• Screwdriver required for buckle closure (not included)
No. BT75SDT
48
Cable Ties & Wire Markers | Wire Markers
Pre-Printed Wire Marker Books
Pre-Printed Wire/Cable Marker Tape Dispenser
• Convenient, pocket-sized book
• Full size markers are perforated and can be torn into half size markers for both
ends of conductors
• Terminal block markers are included to properly identify connectors
• Ten pages of markers per book
• Pre-printed black on white vinyl-cloth, adhesive back markers
• Temperature Range: -50° to 170°F
• Marker sizes:
Full size marker – 0.22" x 1.38". Maximum wire O.D., 0.38"
Half size marker – 0.22" x 0.69". Maximum wire O.D., 0.19"
Terminal block marker – 0.22" x 0.25"
• Indoor/outdoor rated conformable label can be removed and reused
• Durable, temperature-resistant, and dimensionally stable for rough,
textured surfaces
• Resists oil and abrasions
Markers
Total Markers
Each Legend
PCMB-1
0 thru 9
45
PCMB-2
A thru Z, 0 thru 15, +, -, /
10
PCMB-3
1 thru 45
10
PCMB-4
1, 2, 3
150
Part No.
• Flexible polyester marker tape conforms tightly to wires/cables
• Dispenser allows marker tape to be cut to the exact length required for marking any
size wire/cable
• Durable plastic dispenser can be attached to tool belt for industrial use
• Character height is 0.11"
• Pre-printed black on white, adhesive-back polyester
• Indoor/outdoor rated is resistant to UV light, chemicals, and abrasions
• Excellent long lasting adhesion properties
• Temperature Range: -40° to 250°F
PCMB-5
A, B, C
150
PCMB-6
T1, T2, T3
150
PCMB-7
L1, L2, L3
150
PCMB-8
1 thru 15
16 thru 90
A thru Z, +, -, /, 0
6
4
2
PCMB-12
A thru Z
+
Blank (write-on)
15
8
7
21
PCMB-13
+, -, AC, DC
POS, NEG, GND
NEUT
SPARE, Blank (write-on)
45
21
21
21
Part No.
Description
PCMB-16
0 thru 33, A, B, C, +, -, L1, L2, L3, T1, T2, T3
10
PMD-0-9
Dispenser filled with one 8-ft. roll each number 0 thru 9
PCMB-25
0 thru 9
L1, L2, L3, T1, T2, T3
45
15
PMDR-0-9
Replacement refill rolls set for PMD-0-9,
one 8-ft. roll each number 0 thru 9
Wire Markers | Cable Ties & Wire Markers
800.777.3300 | Panduit.com
Blank Self-Laminating Write-On Wire/Cable Marker Books
• 10 pages of markers per book
• Clear section of marker overlaminates and protects printed legend
• Markers have ink receptive area to allow handwritten legends
Part No.
Marker Size
Markers Per Page
PSCB-3Y
1"W x 3"L
6
Markers Per Book
60
PSCB-6Y
1"W x 6"L
3
30
Blank Self-Laminating Wire/Cable Marker Dispensers
• Self-laminating labels are provided in handy dispenser which
protects markers when not in use
• Clear section of marker overlaminates and protects
write-on legend
• Quick, easy to use for smaller installations and maintenance
• White, adhesive back write-on vinyl
• Indoor/outdoor rated conformable material for general
wire/cable labeling
• Temperature Range: -40° to 150°F
Kit Part No.
Refill Roll Part No.
Kit Content
Marker Size
Print-On Height
Min. Cable O.D.
Max. Cable O.D.
Std. Pkg. Qty.
S100X125VARY
S100X125VAFY
(1) Dispenser
(1) Roll, white write-on, vinyl label
(1) PFX-0 pen
1"W x 1.25"L
0.38"
0.12"
0.28"
Roll of 200
S100X225VARY
S100X225VAFY
(1) Dispenser
(1) Roll, white write-on, vinyl label
(1) PFX-0 pen
1"W x 2.25"L
0.75"
0.24"
0.48"
Roll of 100
49
50
Labelmakers Easy-Mark™ Labeling Software
• Quickly and easily generate labels
• Market-specific labeling application tools assist in creation of identification
solutions for data centers, network applications, panel shops, and construction
and maintenance applications
• Saves times and money (up to 75%) with features such as WYSIWYG user
interface, data import, symbol import, and pre-loaded formats
• Upgrades available at www.panduit.com
• Site license available for up to five additional installs per license
System Requirements:
• 64 MB hard drive space and 64 MB RAM (256 MB RAM recommended)
• Windows* 2000, XP, Vista, 7, 8, or 10
• Mouse or compatible pointing device
• Microsoft.NET Framework 2.0 or higher
• CD-ROM drive or USB Port
*Windows is a registered
trademark of Microsoft
Corporation in the United States
and/or other countries
Part No.
PROG-EMCD3
Description
Easy-Mark™ Labeling Software supplied on CD-ROM
Laser/InkJet Self-Laminating Wire Cable Marker Labels
• Indoor/outdoor rated for durability;
high-temperature resistance, and dimensional stability; does not stretch or easily
tear; preferred method for wire/cable labeling
• Polyester label is white* with print-on area
• Order number of labels required in multiples of Std. Pkg. Qty
• Meets ASTM E-595 for air space handling (white only)
• Temperature Range: -65° to 225°F
Part No.
Wire / Cable Size
Label Size
Print-On Height
Min. Cable O.D.
Max. Cable O.D.
Pkg. Qty.
S050X075YAJ
For 18 – 14 AWG wire
0.5"W x 0.75"L
0.25"
0.08"
0.16"
5000
S050X125YAJ
For 12 – 10 AWG wire
0.5"W x 1.25"L
0.38"
0.12"
0.28"
5000
S050X150YAJ
For Cat. 5e/Cat. 6/Cat. 6A cables
0.5"W x 1.5"L
0.5"
0.16"
0.32"
5000
S100X075YAJ
For 18 – 14 AWG wire.
1"W x 0.75"L
0.25"
0.08"
0.16"
2500
S100X125YAJ
For 12 – 10 AWG wire.
1"W x 1.25"L
0.38"
0.12"
0.28"
2500
S100X150YAJ*
For Cat. 5e/Cat. 6/Cat. 6A cables
1"W x 1.5"L
0.50"
0.16"
0.32"
2500
S100X225YAJ*
For 8 – 4 AWG wire.
1"W x 2.25"L
0.75"
0.24"
0.48"
1000
S100X400YAJ
For 2 – 1 AWG wire
1"W x 4"L
1.00"
0.32"
0.95"
1000
S200X150YAJ
For Cat. 5e/Cat. 6/Cat. 6A cables
2"W x 1.5"L
0.50"
0.16"
0.32"
1000
S200X225YAJ
For 8 – 4 AWG wire
2"W x 2.25"L
0.75"
0.24"
0.48"
1000
S200X400YAJ
For 2 – 1 AWG wire
2"W x 4"L
1.00"
0.32"
0.95"
1000
*Other colors available, replace A with B (Blue), C (Brown), D (Green), E (Gray), F (Orange), G (Purple), H (Red) and I (Yellow).
Labelmakers
800.777.3300 | Panduit.com
51
Thermal Transfer Desktop Printer and Accessories
• Compact, lightweight design enables use in office or remote locations
• 300 dpi thermal transfer printer creates crisp, clear legends with superior legibility
• Up to 2.00 inches per second print speed for fast label production
• Use to print a wide variety of self-laminating labels, component labels,
non-laminated labels, heat shrink labels, marker plates and continuous
tapes up to 4.00 inches wide
• Easy-Mark™ Labeling Software and hybrid ribbon included with printer
Part No.
Description
TDP43ME
300 dpi printer; includes printer, Panduit Easy-Mark™ Labeling
Software, RMEH4BL black hybrid ribbon, AC power adapter with US
power cord, USB cable, user manual, quick start card, and driver disk;
for use in North America
TDP43ME-KIT
TDP43ME printer kit. Includes: printer, Panduit Easy-Mark™ Labeling
Software, RMEH4BL black hybrid ribbon, AC power adapter with US
power cord, USB cable, user manual, quick start card,
TDP43ME-RS Roll Stand, TDP43ME-CASE, one roll of S100X150VATY
labels, and driver disk; for use in North America
Thermal Transfer Printable Arc Flash Labels
• Provide employees with the highest degree of safety through proper identification
and communication
• Clearly visible and recognizable hazard information to communicate arc flash
hazards present
• Labels are constructed of durable polyester designed to withstand UV exposure,
outdoor use, water, abrasion
• Custom Arc Flash Hazard Labels can be printed using Panduit labeling software
with desktop thermal transfer printers
• Use thermal transfer resin ribbon
Ribbons for Use with the
TDP43ME Thermal Transfer
Desktop Printer
• Hybrid – Recommended for use
with self-laminating, heat shrink,
component and non-laminated
labels
• Resin – Recommended for use
with component labels, marker
plates, and continuous tape
• 4.3" x 240-ft. (110mm x 73m)
Part No.
Description
RMEH4BL*
Black hybrid thermal transfer ribbon. Use with heat shrink,
self-laminating, Turn-Tell®, tan polyimide labels, and vinyl cloth
labels
RMER4BL*
Black resin thermal transfer ribbon. Use with polyester and
white polyimide labels, continuous vinyl tape, marker plates,
and raised panel labels
RMER4BU
Blue resin thermal transfer ribbon. Use with polyester and
white polyimide labels, continuous vinyl tape, marker plates,
and raised panel labels
RMER4GR
Green resin thermal transfer ribbon. Use with polyester and
white polyimide labels, continuous vinyl tape, marker plates,
and raised panel labels
RMER4RD
Red resin thermal transfer ribbon. Use with polyester and white
polyimide labels, continuous vinyl tape, marker plates, and
raised panel labels
RMER4WH
White resin thermal transfer ribbon. Use with polyester labels,
continuous vinyl tape,
marker plates, and raised panel labels
*For 2.5" wide ribbons, replace 4 in part number with 2. For example, the part
number of a 2.5" wide black hybrid thermal transfer ribbon is RMEH2BL.
Thermal Transfer Continuous Label Tapes
• Tapes offer crisp, clear legends with superior legibility
• Indoor/outdoor rated
• Conformable flat label applications for safety and facility identification
• Temperature Ranges:
• Can be overlaminated to increase durability
Vinyl: -58° to 176°F
• Use thermal transfer resin ribbon
Polyester: -40° to 302°F
• Vinyl Tapes: 4" x 100-ft.
Reflective: -40° to 180°F
• Reflective Tapes: 4" x 50-ft.
Custom Die-Cut
4" x 6"
C400X600YX1
100/Roll
4" x 6"
C400X600YZ1
100/Roll
4" x 6"
C400X600A51
100/Roll
Vinyl Tapes, 4" x 100-ft.
4" x 4"
C400X400A51
250/Roll
4" x 4"
C400X400YZ1
250/Roll
Custom Continuous Color Header Tape
4" x 50-ft.
T400X000A91
4" x 50-ft.
T400X000YX1
Reflective Tapes, 4" x 50-ft.
Part No.
Color
Part No.
Color
T400X000VP1Y
White
T400X000RP1
White
T400X000VQ1Y
Blue
T400X000RQ1
Blue
T400X000VR1Y
Brown
T400X000RU1
Orange
T400X000VS1Y
Green
T400X000RW1
Red
T400X000VT1Y
Gray
T400X000RX1
Yellow
T400X000VU1Y
Orange
T400X000VV1Y
Purple
T400X000VW1Y
Red
T400X000VX1Y
Yellow
Part No.
Color
T400X000VY1Y
Black
T425X000YK1
Clear
Non-Printable Clear Overlaminate
Tapes, 4.25" x 100-ft.
Labelmakers 52
PanTher™ Hand-Held Thermal Transfer Printer and Accessories
• Cut-to-length functionality eliminates label waste and label trimming labor
• Partial cut feature available to provide tear-apart strips of labels
• P1™ Label Cassette contains an integrated memory device for automatic formatting,
recall of last legend used, and number of labels remaining in the cassette
• Market specific labeling tools simplify label creation for electrical components, panel
building, and construction and maintenance
• USB interface for importing data, system upgrades, and printing from a wireless
laptop or desktop computer
• Prints self-laminating labels, heat shrink tubing, die-cut component labels and
continuous tapes
• Fast loading label cassette includes both label material and ribbon to make changing
labels easy
• Large graphic display with backlight for improved visibility
P1™ Continuous Reflective Tape Cassettes for PanTher™
LS8EQ and Hand-Held Thermal Transfer Printers
• Fast loading P1™ Label Cassette includes both label material and ribbon to make
changing labels easy
• Reflective material improves label visibility in low light conditions
• For flat label applications only
• 1" x 18-ft.
• Reflective temperature range: -40° to 180°F
Part No.
Description
T100X000RPC-BK
Black on white, reflective tape
T100X000RUC-BK
Black on orange, reflective tape
T100X000RXC-BK
Black on yellow, reflective tape
P1™ Continuous Tape Cassettes for PanTher™ LS8EQ
Hand-Held Thermal Transfer Printers
• Fast loading label cassette includes both label material and ribbon to make
changing labels easy
• Print custom pipe markers, voltage markers, signs and bin marker labels on demand
• Available in a variety of colors, in polyester and vinyl adhesive materials
• For flat label applications only
• 1" x 25-ft.
• Polyester temperature range: -40° to 302°F
• Vinyl temperature range: -50° to 225°F
Part No.
Description
T100X000VPC-BK
Black on white, vinyl tape
T100X000VPC-RD
Red on white, vinyl tape
T100X000VQC-BK
Black on blue, vinyl tape
T100X000VQC-WH
White on blue, vinyl tape
T100X000VSC-BK
Black on green, vinyl tape
T100X000VSC-WH
White on green, vinyl tape
T100X000VUC-BK
Black on orange, vinyl tape
T100X000VWC-BK
Black on red, vinyl tape
Part No.
Description
T100X000VWC-WH
White on red, vinyl tape
LS8EQ-KIT
Includes LS8EQ printer with QWERTY keypad, one cassette of
S100X150VAC self-laminating labels, six AA alkaline batteries, LS8-CASE,
LS8-PCKIT, LS8-IB, LS8-WS, quick reference card and operator’s manual
T100X000VXC-BK
Black on yellow, vinyl tape
T100X000VYC-WH
White on black, vinyl tape
LS8EQ
Includes LS8EQ printer with QWERTY keypad, one cassette of
S100X150VAC self-laminating labels, six AA alkaline batteries and
quick reference card
T100X000YKC-BK
Black on clear, polyester tape
T100X000YKC-WH
White on clear, polyester tape
Metal Embossing Hand Tool and Tape System
• Multi-functional cutting die design creates embossed marker plates with raised cable tie slot in
one step instead of three, for faster installation
• Lightweight, compact, and portable, allows user to create custom length identification on
demand at remote job sites
• Embosses 3/16" characters (A-Z, 1-9, /, ( ) onto stainless steel or aluminum tape, to improve
visibility in applications that are subjected to dirt or paint
Part No.
Tool Kit
MEHT187
Includes tool, additional marking wheel, carrying case, one
roll each META (aluminum) and METS (stainless steel) tape.
Part No.
Description
Roll Size
Std. Pkg.
Qty.
META-X
Aluminum tape*
0.50" x 16'
10
METS3-X
316 grade stainless steel tape
0.50" x 21'
10
METS4-X
304 grade stainless steel tape
0.50" x 21'
10
*Aluminum ties are recommended for use with aluminum tape to prevent
galvanic reaction (corrosion that can occur between stainless steel and
aluminum in certain environments).
ID Tags | ID Tags & Pipe Markers
800.777.3300 | Panduit.com
Valve Identifier Plastic Tags
Soft Aluminum Tags
Mark and identify the status of the valve and prevent
accidental adjustment.
Imprint to leave a
lasting impression
even if ink wears off.
•0.015" Rigid Vinyl
•2 1/2"H x 2"W with 3/8" metal grommet
•Sold in Packs of 5
PIDT001
PIDT003
53
•24-gauge (0.020")
thick, double-sided soft
aluminum laminate over
tag board
•3/16" plain or eyelet hole
•Writing permanently
debosses
PIDT002
Plain Hole Part No.
Eyelet Hole Part No.
Size
Std. Pkg. Qty.
PIDT005
PIDT009
3/4" x 3"
Pkg. of 25
PIDT006
PIDT010
1 3/8" x 3 1/8"
Pkg. of 25
PIDT007
PIDT011
2" x 4"
Pkg. of 25
PIDT008
PIDT012
3" x 5"
Pkg. of 25
PIDT004
Stainless Steel and Brass Marker Plates and Tags
• Provides permanent identification of pipes, conduit, valves, cables
and equipment in harsh environments
• Designed for use with Panduit’s Pan-Steel® Stainless Steel Cable
Ties for fast installation at lowest installed cost
• All marker plates/tags can be embossed or laser etched with Panduit
Factory Custom Marking Service
• Designated plates feature easy feed design with a raised slot to
simplify cable tie installation and improve productivity
• Temperature ranges:
Stainless Steel Marker Plates, Tags, & Cable Ties: -112° to 1000°F
Brass Tags: -112° to 302°F
Custom Marking Parameters
Part No.
Material
Color
Max. 3/16" (4.77mm)
Character Per Line
Max. Lines
of Text
Size
Thickness
Used with
Pan-Steel® Cable Ties
MMP350W17-Q
304 Stainless Steel
Natural
23
6
1.73"W x 3.5"L
0.015"
MLT-S
25
MT350-C
304 Stainless Steel
Natural
26
3
0.75"W x 3.5"L
0.010"
MLT-S
100
Std. Pkg. Qty.
MT350W17-Q
304 Stainless Steel
Natural
26
6
1.70"W x 3.5"L
0.015"
MLT-S
25
MT150D-Q
304 Stainless Steel
Natural
5, 6, 5
3
1.5" dia.
0.035"
MLT-S
25
MTB150D-Q
Brass
Brass
5, 6, 5
3
1.5" dia.
0.040"
MLT-S
25
Metal Indenting Machine
• Provides quick, easy, and permanent identification with Panduit’s Pan-Alum™
Marker Plates and Cable Ties and Pan-Steel® Stainless Steel Marker Plates, Tags,
Cable Ties and Straps
• Automatic table indexing advances material forward for convenience and
improved productivity
• New, improved design features aluminum base and durable construction
• 3/16" character wheel
No. MIM187
54
ID Tags & Pipe Markers | Pipe Markers
Pipe Markers
Marking and identification of contents in pipes
Designed to meet or exceed
and piping systems is important to safety
ASME (ANSI) A13.1-2007
recommendations for size,
and maintenance. Pipe markers are to visibly
color and visibility.
identify contents, flow directions and hazard
classification, thus promoting
CONTENTS OF THE PIPE
COLOR
a safe working environment.
Installation recommendations:
•Above or below center visual line of pipe
•Frequent intervals on straight pipe runs
•Close to valves
•Near branches and T’s
•Any change in direction
•Before and after pipe going through walls
Fire quenching fluids
WHITE ON RED
Toxic and corrosive fluids
BLACK ON ORANGE
Flammable fluids
BLACK ON YELLOW
Combustible fluids
WHITE ON BROWN
Potable, cooling, boiler
feed, and other water
WHITE ON GREEN
Compressed Air
WHITE ON BLUE
Self Stick Vinyl (PPMA)
Snap On Pipe Markers (PPMS)
•0.004" flexible vinyl marker has UV-resistant polyester overlaminate with high-tack,
acrylic adhesive back
•Included arrow provides proper directional flow marking
•Durable, protective gloss surface withstands fading, abrasions, splashes, grease,
dust, and dirt
•Service temperature is –20° to 176° F
•Precoiled, heavy gauge 0.020" rigid vinyl plastic is lightweight, yet durable to
withstand tough industrial environments
•Fits over pipes with dirty, greasy, or rough surfaces or other less than
perfect surfaces
•Easy to remove and reapply
•Service temperature range is –4° to 158° F (not recommended for hot pipes)
Part No.
Legend
Part No.
Legend
Part No.
Legend
Part No.
1001
1051
1103
1153
1003
1053
1105
1157
1005
1057
1107
1159
1007
1059
1109
1161
1009
1061
1111
1163
1011
1063
1113
1165
1013
1065
1115
1167
1015
1067
1117
1169
1017
1069
1119
1171
1019
1071
1121
1173
1021
1073
1123
1175
1023
1075
1125
1177
1025
1077
1127
1179
1027
1079
1129
1181
1029
1081
1131
1183
1031
1083
1133
1185
1033
1085
1135
1187
1035
1087
1137
1189
1037
1089
1139
1191
1039
1091
1141
1193
1041
1093
1143
1195
1043
1095
1145
1197
1045
1097
1147
1199
1047
1099
1149
1201
1049
1101
1151
1203
Legend
Pipe Markers | ID Tags & Pipe Markers
800.777.3300 | Panduit.com
Part No.
Part No.
Legend
Legend
Part No.
Legend
Part No.
1205
1285
1365
1443
1207
1287
1367
1445
1209
1289
1369
1447
1211
1291
1371
1449
1213
1293
1373
1451
1215
1295
1375
1453
1217
1297
1377
1457
1219
1299
1379
1459
1221
1301
1381
1461
1223
1303
1383
1463
1225
1305
1385
1465
1227
1307
1387
1467
1229
1309
1389
1469
1231
1311
1391
1471
1233
1313
1393
1473
1235
1315
1395
1475
1237
1317
1397
1477
1239
1319
1399
1479
1241
1321
1401
1481
1243
1323
1403
1483
1245
1325
1405
1485
1247
1327
1407
1487
1249
1329
1409
1489
1251
1331
1411
1491
1253
1333
1413
1493
1257
1335
1415
1495
1259
1337
1417
1497
1261
1339
1419
1499
1263
1341
1421
1501
1265
1343
1423
1503
1267
1345
1425
1505
1269
1347
1427
1507
1271
1349
1429
1509
1273
1351
1431
1511
1275
1353
1433
1513
1277
1357
1435
1515
1279
1359
1437
1517
1281
1361
1439
1519
1283
1363
1441
1521
Self Stick (PPMA)
Legend
Snap On Pipe Markers (PPMS)
Size Code
Pipe Diameter
Marker Size
UOM
Size Code
Pipe Diameter
Marker Size
UOM
A
3/4" to 1 1/4"
1" x 8"
Each
A
3/4" to 1 1/4"
6" x 8"
Each
B
1 1/2" to 2"
1 1/2" x 8"
Each
B
1 1/2" to 2"
9" x 8"
Each
D
2 1/2" to 6"
2 1/2" x 12"
Each
C
2 1/4" to 3"
14" x 12"
Each
H
8" to 10"
4" x 24"
Each
E
3 1/4" to 5"
19" x 12"*
Each
F
5 1/4" to 6"
25" x 12"*
Each
*Have self-adhesive leading edge for secure fit
How to Order
Pipe Markers:
1

Select Material Code:
Self Stick – PPMA
2

Select Pipe Marker Base
Part Number: 1001
3

Select Size Code:
3/4" to 1 1/4" – A
4

Combine Codes in Specific Order
for Complete Part Number: PPMA1001A
55
56
ID Tags & Pipe Markers | Pipe Markers
Part No.
Legend
Part No.
Legend
Part No.
Legend
Part No.
1523
1561
1597
1633
1525
1563
1599
1635
1527
1565
1601
1637
1529
1567
1603
1639
1531
1569
1605
1641
1533
1571
1607
1643
1535
1573
1609
1645
1537
1575
1611
1647
1539
1577
1613
1649
1541
1579
1615
1651
1543
1581
1617
1653
1545
1583
1619
1657
1547
1585
1621
1659
1549
1587
1623
1661
1551
1589
1625
1663
1553
1591
1627
1665
1557
1593
1629
1667
1559
1595
1631
1669
Self Stick (PPMA)
Legend
Snap On Pipe Markers (PPMS)
Size Code
Pipe Diameter
Marker Size
UOM
Size Code
Pipe Diameter
Marker Size
UOM
A
3/4" to 1 1/4"
1" x 8"
Each
A
3/4" to 1 1/4"
6" x 8"
Each
B
1 1/2" to 2"
1 1/2" x 8"
Each
B
1 1/2" to 2"
9" x 8"
Each
D
2 1/2" to 6"
2 1/2" x 12"
Each
C
2 1/4" to 3"
14" x 12"
Each
H
8" to 10"
4" x 24"
Each
E
3 1/4" to 5"
19" x 12"*
Each
F
5 1/4" to 6"
25" x 12"*
Each
*Have self-adhesive leading edge for secure fit
How to Order
Pipe Markers:
1

Select Material Code:
Self Stick – PPMA
2

3

Select Pipe Marker Base
Part Number: 1523
Color Banding Pipe Marking Tapes
Select Size Code:
3/4" to 1 1/4" – A
4

Combine Codes in Specific Order
for Complete Part Number: PPMA1523A
Directional Flow Arrow Tapes
Provide 360° visibility for flow direction, with repeated arrows on the
tape’s length.
Variety of colors are ideal for coding pipes.
•0.005" tapes with self-adhesive back, no liner
•Service temperature range -20° to 140°F
•Available in 1", 2" and 3" widths
•108-ft. rolls
•0.006" self-adhesive vinyl
•Available in 1", 2" and 4" widths
•54-ft. and 108-ft. rolls
Available colors with color code:
Available colors with color code:
Red – RED, Green – GRN, Blue – BLU, Gray – GRY, Brown – BRN,
Black – BLK, Yellow – YEL, Orange – ORN, White – WHT, Purple – PUR
Black/Yellow – BY, Green/White – GW, Blue/White – BLW,
Red/White – RW, Black/Orange – BO, White/Brown – WBR
To Order: Add color code after part number.
Meets ASME
A13.1, 3.1
To Order: Add color code after part number.
Example: Part No. PFM1X36 + Color Code YEL = PFM1X36YEL
Example: Part No. PPMR1X54 + Color Code BY = PPMR1X54BY
Part No.
Size
UOM
Part No.
Size
UOM
Part No.
Size
PFM1X36
1" x 108-ft.
Roll
PPMR1X54
1" x 54-ft.
Roll
PPMR1X108
1" x 108-ft.
UOM
Roll
PFM2X36
2" x 108-ft.
Roll
PPMR2X54
2" x 54-ft.
Roll
PPMR2X108
2" x 108-ft.
Roll
PFM3X36
3" x 108-ft.
Roll
PPMR4X54
4" x 54-ft.
Roll
PPMR4X108
4" x 108-ft.
Roll
Pipe Markers | ID Tags & Pipe Markers
800.777.3300 | Panduit.com
57
Roll Tape Pipe Markers
Easily mark pipes quickly at
various locations along a
piping system.
•72 identical legends per roll, with
perforations between each length
•Use in continuous lengths, or
tear at perforations
•0.006" vinyl with protective
laminate surface
•Peel-off liner with self-adhesive
back applies to smooth, clean,
dry surface
•Service temperature is -20° to 140°F
•Available in 1" x 54-ft. or
2" x 54-ft. rolls
Roll Tape Pipe Marker & Directional Flow Arrow Tapes shown.
Part No.
Legend
Part No.
Legend
Part No.
Legend
Part No.
Legend
PPMR0102
PPMR0154
PPMR0122
PPMR0136
PPMR0101
PPMR0155
PPMR0123*
PPMR0134
PPMR0144
PPMR0108
PPMR0124
PPMR0135
PPMR0145
PPMR0109*
PPMR0125
PPMR0137
PPMR0103
PPMR0110
PPMR0126
PPMR0138
PPMR0146
PPMR0112
PPMR0127*
PPMR0139
PPMR0104
PPMR0111*
PPMR0128
PPMR0140
PPMR0147
PPMR0113
PPMR0129
PPMR0141
PPMR0148*
PPMR0114
PPMR0130
PPMR0143
PPMR0149
PPMR0116
PPMR0131
PPMR0142
PPMR0150
PPMR0117*
PPMR0132
PPMR0151
PPMR0118
PPMR0133
PPMR0105*
PPMR0119
PPMR0106*
PPMR0120
PPMR0152
PPMR0115
PPMR0153
PPMR0121
*Legends for 2" x 9" marker size will
be abbreviated for space
To Order: Add size code after part number.
Example: Part No. PPMR0102 + Size Code B = PPMR0102B
Size
Code
Pipe
Diameter
Roll
Size
Marker
Size
Letter
Height
UOM
B
Up to 2"
1" x 54-ft.
1" x 9"
3/4"
Roll
H
Up to 6"
2" x 54-ft.
2" x 9"
1 1/4"
Roll
Roll Form Pipe Markers
Wrap around virtually any size pipe when you
have multiple pipes or pipes of unknown sizes.
•Unroll, measure, and easily cut to length on-site for
proper fit
•0.004" gloss, overlaminated poly vinyl marker wraps to
adhere to itself
Part No.
Legend
Part No.
•High-tack, acrylic adhesive back stays on dirty,
greasy, and rusty pipes
•Legend and arrow repeated, upright and
upside-down, for universal direction and visibility
•Service temperature is -20° to 140°F
•Available 8" x 30-ft. or 12" x 30-ft. in rolls
Legend
Part No.
Legend
PPMR0028
PPMR0011
PPMR0022
PPMR0029
PPMR0031
PPMR0023
PPMR0001
PPMR0012
PPMR0024
PPMR0030
PPMR0013
PPMR0025
PPMR0002
PPMR0014
PPMR0027
PPMR0003
PPMR0015
PPMR0026
PPMR0004
PPMR0016
PPMR0006
PPMR0032
PPMR0005
PPMR0017
PPMR0007
PPMR0018
PPMR0008
PPMR0019
Size
Code
Pipe
Diameter
Roll
Size
Letter
Height
UOM
PPMR0020
B
Up to 2"
8" x 30-ft.
3/4"
Roll
H
Up to 6"
12" x 30-ft.
1 1/4"
Roll
PPMR0009
PPMR0010
PPMR0021
To Order: Add size code after part number.
Example: Part No. PPMR0029 + Size Code H = PPMR0029H
58
ID Tags & Pipe Markers | Specialty Pipe Markers
IIAR Ammonia Pipe Markers
Meets IIAR guidelines for proper pipe marking
as specified in Bulletin No. 114.
Self Stick
Part No.
System
System
Abbreviation
Physical
State
Pressure
Level
PPMA3001
Booster Discharge
BD
VAP
LOW
Identify Ammonia refrigeration piping and system components.
PPMA3002
Condenser Drain
CD
LIQ
HIGH
•0.004" flexible vinyl, self-sticking markers have high-tack adhesive
backed with liner
•One legend with directional flow arrows on each end to cut off for
proper placement
•Glossy UV-resistant surface withstands dust, dirt and grease
•Service temperature range is -20° to 176°F
•Install onto clean smooth pipe surface
PPMA3003
Defrost Condensate
DC
LIQ
HIGH
PPMA3004
Hot Gas
HG
VAP
HIGH
PPMA3005
Hot Gas Defrost
HGD
VAP
HIGH
PPMA3006
High Pressure Liquid.
HPL
LIQ
HIGH
PPMA3007
High Stage Discharge
HSD
VAP
HIGH
PPMA3008
High Stage Suction
HSS
VAP
LOW
PPMA3009
High Temperature Recirculated Liquid
HTRL
LIQ
LOW
To Order: Add size code after part number.
PPMA3010
High Temperature Recirculated Suction
HTRS
LIQ/VAP
LOW
PPMA3011
Liquid Injection Cooling
LIC
LIQ
HIGH
Example: Part No. PPMA3001 + Size Code A = PPMA3001A
Size Code
Pipe Diameter
Marker Size
UOM
PPMA3012
Low Stage Suction
LSS
VAP
LOW
A
3/4" x 1 1/4"
1" x 11"
Each
PPMA3013
Low Temperature Recirculated Liquid
LTRL
LIQ
LOW
B
1 1/2" x 2"
1 1/2" x 15 7/8"
Each
PPMA3014
Low Temperature Recirculated Suction
LTRS
LIQ/VAP
LOW
C
2 1/2" x 6"
2 1/2" x 23 5/8"
Each
PPMA3015
Low Temperature Suction
LTS
VAP
LOW
D
8" x 10"
3 1/2" x 33 1/2"
Each
PPMA3016
Relief Vent
RV
—
—
Duct Markers
Medical Gas Pipe Markers
Identify the contents
of medical gas piping
systems.
•0.004" gloss vinyl,
3" x 3" marker with legend
repeated five times, upright
and upside-down for
universal fit and visibility
•Adhesive backed and
peel-off liner
•Adhere to pipes up to
3/4" OD size
•Service temperature is
-20° to 140°F
•20 markers per package
Mark air flow and its equipment
purpose in duct work systems.
•Single legend printed on poly
overlaminated self-stick vinyl
•High-tack adhesive back
•Available in two sizes
Part No.
Legend
Part No.
Legend
PPMA41
EXHAUST
PPMA45
RELIEF
PPMA42
EXHAUST AIR
PPMA46
RELIEF AIR
PPMA43
INTAKE AIR
PPMA47
RETURN AIR
PPMA44
OUTSIDE AIR
PPMA48
SUPPLY AIR
Part No.
Legend
Part No.
PPMA4001
PPMA4006
PPMA4002
PPMA4007
PPMA4012
Available colors with color code:
PPMA4003
Black/Yellow – BY, White/Green – WG, White/Blue – WBL
PPMA4010
EVAC
Legend
PPMA4008
PPMA4009
INSTRUMENT AIR
PPMA4011
WAGD
PPMA4004
Size
Std. Pkg. Qty.
PPMA4005
3" x 3"
20
PPMA4013
To Order: Add color code, then size code after part number.
Example: Part No. PPMA41 + Color Code BY + Size Code D = PPMA41BYD
Size
Code
Pipe
Diameter
Marker
Size
Arrow
Size
Letter
Height
UOM
D
Up to 6"
2 1/2" x 12"
2 1/2" x 2 1/2"
1 1/4"
Each
H
Up to 10"
4" x 24"
4" x 4"
2 1/2"
Each
Meets NFPA 99C-Section 4-3.5.4.1. and CGA Pamphlet C-9 Section
4.1 color requirements
800.777.3300 | Panduit.com
Intro | Lockout / Tagout
59
Just shutting down or disconnecting
equipment is not enough…Lockout/
Tagout keeps employees safe by making
it inoperable. Comply with OSHA
Regulations and LOCK IT OUT!
Before repairs, servicing, maintenance, or set-up of machines and
equipment can begin, prevent the unexpected — the accidental
start-up!
Procedures, devices, and personnel must be set in place to prevent the serious
injury or death that could occur when someone thinks something is safely off.
To ensure machines and equipment remain inoperable means establishing a
“program consisting of energy control procedures, employee training, and periodic
inspections...” as described in the OSHA standard. The standard also identifies
products used for achieving these goals, such as lockout and tagout devices.
Highlighted here are seven
steps to creating an effective
lockout/tagout program.
þ 1. Be Aware of the Lockout Regulations
Become familiar with the federal regulations known as The Control of
Hazardous Energy (Lockout/Tagout).
þ 2. Develop List of Machinery & Equipment
Survey your facility for all machinery and equipment that have the potential
for requiring lockout.
þ 3. Identify & Mark Energy Sources & Lockout
Points
Locate and document start-up areas of energy sources, such as:
• Mechanical • Electrical • Hydraulic
• Thermal
• Pressure • Process Control
• Stored Energy (gravity, springs)
þ 4. Determine the Lockout Controls
Identify and document the necessary devices that isolate and lock out
energy sources, and secure them for on-site use. Standardize the devices
for various functions for proper identification.
þ 5. Set up Lockout Training & Procedure Program
Develop, standardize, and document the lockout process for each energy source.
Identify employees’ level of involvement in the program – those that are made
aware, affected, and to perform the lockout procedures. Accomplish this through
comprehensive training programs and certifications.
þ 6. Implement the Lockout Program
Initiate and enact the lockout/tagout program in accordance with the training
procedures. Post reminders and have the necessary lockout/tagout devices
readily available.
þ 7. Review Lockout Program
Identify and document changes to existing procedures and new energy sources
that require lockout. Make corrections, changes, and additions to the program.
Conduct periodic review of lockout procedures (required at least annually) to
ensure they are up to date and requirements are being met.
Post signs, apply labels and tags…
…to warn and identify energy source
areas and points requiring shut-down and lockout/tagout procedures.
29 CFR § 1910.147… The Control of Hazardous Energy (Lockout/Tagout) ...requires the employers to establish a program and utilize procedures for affixing
appropriate lockout devices or tagout devices to energy isolating devices, and to otherwise disable machines or equipment to prevent unexpected energization,
start-up or release of stored energy in order to prevent injury to employees.
We offer solutions to help meet your lockout/tagout requirements and make your employees aware of the energy source hazards found throughout your facility. Look for
products to meet your specific lockout needs on the following pages - ranging from lockout devices to training materials. Call us for consultation and on-site assessment
of your lockout/tagout requirements.
60
Lockout / Tagout | Hasp
Lockout Hasps
These devices provide the ideal solution when procedures require multiple workers on locked-out equipment.
Workers can be assigned a padlock (sold separately) with shackle diameter up to 9/32" to attach to the hasp before starting their task. Ensure the energy source stays
locked out — with multiple workers’ padlocks in the holes of the closed hasp. Once each worker completes their task, they remove their padlock. The hasp cannot be
removed until the last padlock is removed.
Aluminum Tag Hasps
Tag Hasp
Lock out more equipment with the large reach
hasp made to withstand tough and abusive
environments.
Change out, insert, and secure a tag for each
lockout situation with the Tag Hasp.
Shown with
Padlocks,
Tab Tag, sold
separately
•5 1/4" x 3" hasp fits in the palm of the hand
•Lightweight, all-dielectric plastic design
•STOP-shaped octagon front panel contains
changeable Tab Tag (sold separately below)
•Scissor-style hasp comprised of two high-strength
0.090" thick red anodized aluminum plates
•Accommodates up to six padlocks (sold separately)
•Crossover jaw ends prevent prying and tampering
•Get true 1 1/2" round reach with the full jaw opening
•Measures 7"H x 2 3/4"W
•Bold, contrasting red/white/black lockout hazard
message labels on both sides — with space to write in
necessary information
•Red octagon shape reinforces lockout status and
conveys STOP
Crossover jaw
prevents prying
and tampering.
English, Spanish,
and French labels
included.
Easy to use:
•Insert lockout tag over the top hole inside
the front panel
•Close down the 2 1/4" octagon panel
to hold the tag in place
•Insert the open end of the 1/4" wide loop
to lockout the device
•Hasp hangs by the 1 3/8" x 2 3/4" closed oval loop
•Secures with up to three padlocks (sold separately)
•Red octagon shape reinforces lockout status and
conveys STOP
Part No.
UOM
PSL-1020
Each
UOM
Each
PSL-1021
PSL-1022
Back
Open position to insert tag
Double-Cross Aluminum Tag Hasps
Loop end brace and secure in place by padlock
Tab Tags
•Unique tag design fits over
special octagon-shaped tab
•For use with Tag Hasp (above)
•Tag is secured when the device
is in the locked position
•Show the full face of the tag at
all times
•Tags measure 4 1/2" x 2 1/8"
•Durable, 0.015" rigid
plastic material
•Pack of 25
Lock out equipment with large reach,
pry-resistant hasps.
•Made of two red anodized, 0.090" aluminum plates
•Double-crossed, octagon-shaped jaws are offset to
cross over one another when closed, preventing the
hasp from being easily pried apart
•Openings provide optimal reach - 1 3/4" dia. on one
end and 3/4" dia. on the other
•Measures 7"H x 3 1/8"W (2 3/4" in the body) with
hazard message labels on both sides
•Red octagon shape reinforces lockout status and
conveys STOP
PSL-1018
Std. Qty. Pkg.
25
Aluminum Hasps
Non-Sparking style
English, Spanish,
and French labels
included.
UOM
Each
PSL-1023
PSL-1024
Back
PSL-1019
•Padlock keeps hasp closed until the last
padlock is removed
•Red vinyl-coating
•Non-sparking aluminum
•Comes in 1" and 1 1/2" diameter openings
•Accommodates up to six padlocks
(sold separately)
Part No.
Opening
Length
PSL-1013
1"
4 1/2"
UOM
Each
PSL-1014
1 1/2"
5"
Each
Back
Circuit Breaker | Lockout / Tagout
800.777.3300 | Panduit.com
61
Circuit Breaker Lockout System
OSHA (Occupational Safety and Health Administration) mandates that all energy sources be turned off and locked out to protect employees from injuries caused by the accidental
startup of equipment under repair and service. To support compliance with OSHA 1910.147, Panduit offers a complete line of high quality, Circuit Breaker Lockout Devices to ensure
that electrical energy sources are isolated for optimal work place safety. These Circuit Breaker Lockouts are part of an extensive line of innovative safety devices designed by Panduit to
protect employees from risks associated with all forms of hazardous energy, while meeting safety and regulatory requirements.
PowerLOK™ Circuit Breaker Lockout Devices
Panduit’s new PowerLOK™ Circuit
Breaker Lockout Devices include
many innovative features to provide a
versatile, easy to use lockout/tagout
device. These devices can be applied
to single or multi-pole circuit breakers
(such as 120/277V breakers) to
prevent the breaker from being turned
back on; for safe performance of
maintenance or service in accordance
with lockout/tagout procedures.
Miniature Circuit Breaker Lockout Devices
•Quickly locks out miniature
circuit breakers commonly used
in industrial automation and
motor control
•On the PSL-MCBNT, multiple
padlock orientations allow
adjacent circuit breakers to be
locked out individually
•PSL-MCB can be installed using a
screwdriver
•PSL-MCBNT can be installed by
hand with no tool required
PSL-PCB
•Two Metal Contacts
•Fits Single and Multi-Pole
Circuit Breakers
•Two-Position Padlock Design
•Two-Piece Construction
PSL-MCBNT
PSL-PCBNT
Part No.
Description
Std. Pkg. Qty.
PSL-PCB
PowerLOK™ Circuit Breaker Lockout
1
PSL-PCB-V
PowerLOK™ Circuit Breaker Lockout
5
PSL-PCBNT
PowerLOK™ “No Tool” Circuit Breaker Lockout
1
PSL-PCBNT-V
PowerLOK™ "No Tool" Circuit Breaker Lockout
5
Universal & I-LINE™ Circuit Breaker Lockout Devices
• Quickly locks out circuit breakers (such as 120/277V breakers); ideal for industrial
and harsh applications
• PSL-CB and PSL-CBIL can be installed using a screwdriver
• PSL-CBNT and PSL-CBILNT can be installed by hand, with no tool required
PSL-CBNT
Part No.
Description
Std. Pkg. Qty.
PSL-MCB
Universal miniature circuit breaker lockout
1
PSL-MCB-V
Universal miniature circuit breaker lockout
5
PSL-MCBNT
“No Tool” miniature circuit breaker lockout
1
PSL-MCBNT-V
“No Tool” miniature circuit breaker lockout
5
Large Handle Circuit Breaker Lockout Device
• Quickly locks out large molded-case circuit breakers (such as 480/600V breakers)
• Can be installed by hand, with no tool required
PSL-CBILNT
Part No.
Description
Std. Pkg. Qty.
PSL-CB
Universal circuit breaker lockout
1
PSL-CB-V
Universal circuit breaker lockout
5
PSL-CBNT
“No Tool” Universal circuit breaker lockout
1
PSL-CBNT-V
“No Tool” Universal circuit breaker lockout
5
PSL-CBIL
Circuit breaker lockout device for use with Square
D I-LINE™/Federal Pacific (FPE) circuit breakers
1
PSL-CBILNT
“No Tool” circuit breaker lockout for use with
Square D I-LINE™/Federal Pacific (FPE)
circuit breakers
1
PSL-CBKIT
Circuit breaker lockout kit
(1 each PSL-CBL, PSL-CBNT, PSL-CBILNT)
1
PSL-CB-3PC
(3) PSL-CB universal circuit breaker lockout
1
I-LINE is a registered trademark of Square D Company .
®
PSL-MCB
®
PSL-CBL
Part No.
Description
Std. Pkg. Qty.
PSL-CBL
Large handle circuit breaker lockout
1
PSL-CBL-V
Large handle circuit breaker lockout
5
62
Lockout / Tagout | Circuit Breaker & Cable
Large Handle Lever Lockout
Cinch Cable Lockout
Internal cable spooling feature
for storage.
Funnel-shaped cable feeder for
quick placement.
Universal spooling cable locks out multiple devices at one time.
Position Mounting Rail
Secure Slide Set
Slide Stop Bar into
position over breaker
Lock out large handle or lever circuit breakers.
•Also works on up to three individual circuit breakers, including a variety of
flip-lever switches
•Constructed of red dielectric ABS plastic and incorporates the octagon shape to
convey STOP
•Consists of three parts: Mounting Rail, Slide Set and Stop Bar
•Installs without drilling using 3M™ VHB™ industrial bonding tape (included)*
•Additional mounting rails available for use on multiple panels
•Dimensions: Mounting Rail: 5"L x 3/4"W x 1/4"D,
Slide Set: 2"L x 2"W x 1 3/8"D, and Stop Bar: 5"L x 1"W x 1"D
•Padlock and tag sold separately
*For best adhesion, ideal bond time is 24 to 72 hours prior to lockout application
Part No.
Description
•Unique, compact internal spooling feature
•Lock out multiple devices quickly, neatly, and easily
•Simply extend and loop the 6-ft. nylon-coated steel cable through several devices
to lock them out; then insert the cable end back into the device to cinch tight
•When cable is cinched tight, device can then be secured with a padlock
(sold separately)
•Durable plastic, octagon-shaped device measures 3 1/2" x 4 1/4" x 1 1/4"
•When finished, spool the cable back inside the device for neat, easy storage
•Octagon shape reinforces lockout status and conveys STOP
Part No.
Description
UOM
PSL-1008
Cinch Lockout with 6-ft. cable
Each
PSL-1016
15-ft. cable (separate)
Each
Twist & Turn Cinch Cable Lockout
UOM
PSL-1006
Large Handle Lever Lockout
Each
PSL-1007
Additional Mounting Rails, 5" L
Each
VHB™ is a registered trademark of 3M™
Disposable Padlock Seal
Turn the hasp halves to
cinch cable.
Single-use lock device provides a
cost-saving alternative ideal for
operation-wide plant and facility
lockout, shutdown, and turnaround.
•Eliminates the hassle of misplaced
locks & keys
•Loop and insert band end through
padlock-style body; push band in to
shorten and tighten the loop
•Molded teeth lock band in place inside
the body and cannot reverse out
•Plastic shackle band is tamper-evident;
band can only be broken or cut
for removal
•All-plastic body measures
2 1/2"H x 1 1/2"W x 7/8"D
•7"L x 1/4"W long band rated up to
100-lb. pull strength
•Pack of 10
Cinch closed position
with holes aligned.
Run the cable through various devices; then, with a quick twist of the
hasp, cinch the cable to prevent unauthorized access.
•Easy-to-use cable and cinch lockout hasp solution
•Polycarbonate, compact hasp is comprised of two 3" dia. x 1 1/2" thick rotating
halves with 6-ft. red plastic-coated steel cable
•Visible red octagon shape reinforces the lockout situation
Part No.
Std. Pkg. Qty.
Part No.
UOM
PSL-1030
10
PSL-1017
Each
Valve & Pneumatic | Lockout / Tagout
800.777.3300 | Panduit.com
Gate Valve Lockout Devices
63
Pneumatic Energy Lockout Device
•Gate valves regulating
hydraulic, pneumatic, and
chemical energy can be
locked out quickly and easily
•Accommodates valve
handles ranging from 1.00
inch (25.40mm to 13.00
inches (330.20mm) in
diameter
•Constructed of rugged
polypropylene providing
strength, durability,
and added security
•Secure with padlock and tag
(sold separately)
•Pneumatic energy devices can be locked out quickly and easily without costly tool
modifications or inconvenient in-line valves
•When installed on the male pneumatic fitting, prevents the ability to engage into the
female fitting
•Universal compact design makes the pneumatic lockout device easy to transport
•Five openings install on almost any fitting, even in tight spaces
•Rugged stainless steel construction offers superior strength, durability, added
security and corrosion resistance
•Overall dimensions are 3.5" (88.9mm) diameter x 0.10" (2.54mm) thick
Part No.
Fits Valve Handle Diameter
Size
UOM
PSL-V2A
1.0" – 2.5"
3.5" x 1.5"
Each
PSL-V6A
2.5" – 6.5"
7.0" x 2.0"
Each
PSL-V9
6.5" – 10.0"
10.5" x 2.5"
Each
PSL-V13
10.0" – 13.0"
14.5" x 3.0"
Each
Ball Valve Lockouts
Part No.
UOM
PSL-PEL
Each
Versatile Pneumatic Lockout
English, Spanish, and
French labels included.
Stop valves from being turned with unique
gull-wing design ball valve lockout.
•Quickly and simply secure over any
closed ball valve handle
•Secure with padlock (sold separately)
Wingspan
•Bright red, plastic device works with
halves open
ball valve handles either perpendicular
and close
or parallel to pipe
•Includes red “Danger Locked Out” label
•Red octagon shape reinforces lockout status and conveys STOP
Part No.
Fits Ball
Valve
Fits Handle
Overall Size
UOM
PSL-1059
3/8" – 1 1/4"
up to 5/8"W x 1/4" thick
3 1/8" x 4 1/2" x 4 1/2"
Each
PSL-1058
1 1/2" – 2"
up to 1 1/2"W x 1/2" thick
4 1/2" x 5 2/3" x 5 2/3"
Each
Labels
Additional adhesive labels are
available each in ANSI or APWA
colors: Red – RED,
Yellow – YEL, Blue – BLU,
Green – GRN, Purple – PUR.
To Order:
Part No.
Fits Ball
Valve
UOM
PSL-1065
3/8" – 1 1/4"
Each
PSL-1070
1 1/2" – 2"
Each
Add color code after part number.
Example: Part No. PSL-1065 + Color Code RED = PSL-1065RED
Keep employees safe with this rugged, tamper resistant method to
lock out your pneumatic equipment/source.
•Device has seven openings ranging from 9/32" to 1/2" diameter that accommodate
most male and female pneumatic end-fittings
•Clear cover allows user to see what is locked out
•Constructed of polycarbonate with steel hinge for tamper-resistance and durability
•Red octagon shape reinforces lockout status and conveys STOP
•Overall dimensions are 3 7/8" x 3 1/4" x 1 7/8"
Part No.
UOM
PSL-1012
Each
64
Lockout / Tagout | Switch
Toggle Switch Cover Device
Push Button Cover
•Compact secure design fits most toggle switches and some small circuit breakers
•Easily attached without removal of faceplate or screws
•Accommodates switches
0.45 – 0.78 inches tall x
0.25 – 0.38 inches x
0.25 – 0.40 inches thick
•Constructed of rugged nylon and stainless steel providing strength, durability,
added security and corrosion resistance
Part No.
UOM
PSL-WS
Each
Universal Wall Switch Cover
Prevent accidental startups of push / pull operation buttons,
such as emergency stop buttons.
•Consists of one semi-permanent aluminum ring and a clear polycarbonate top
•Semi-removable design allows for easy storage
•Clear top allows user to see push button
•Tough polycarbonate cover and aluminum ring make it tamper- and
impact-resistant, as well as extremely durable
•Overall dimensions are 2 1/8"H x 2"W x 2 1/2"L
•Available in two sizes to fit over 22.5 and 30mm diameter buttons
•Additional new aluminum rings available
•Octagon shape reinforces lockout status and conveys STOP
•Secures with a padlock (sold separately)
Part No.
Description
UOM
PSL-1003
Push Button Cover with 22.5mm base
Each
PSL-1004
Push Button Cover with 30mm base
Each
PSL-1005
Additional 22.5mm metal ring only
Each
PSL-1002
Additional 30mm metal ring only
Each
Toggle-Switch Cover
Flip the switch, flip the lockout.
Prevent access to a toggle switch, yet still see its position.
•Dual use - works on both rocker/toggle and flat paddle switches
•Attaches to existing switch plate screw(s)
•Fully encloses entire switch
•Cover folds down to block screws and switch access
•Secure with a padlock (sold separately)
•Measures 4 1/2"H x 1 5/8"W x 7/8"D
Part No.
•Unique design reduces error – applies only in
PSL-1015
direction of desired lockout position – on or off
Quick and easy to install, tough lockout includes clear, industrial strength
3M™ VHB™ tape for secure adhesion*.
Switch locked in
up position.
UOM
Each
•Fits over toggle, button, or knob switch
•The top half can be removed and stored when not in use
•Clear polycarbonate maintains visibility of the switch position and doesn’t disrupt
existing decals, markings, or messages
•3 1/2" x 1 1/2" base which covers up to 3/4" x 1"H switch area
•Secures with a padlock (sold separately)
•Octagon shape reinforces lockout status
and conveys STOP
Part No.
UOM
* For best adhesion, ideal bond time is 24 to
PSL-1001
Each
72 hours prior to lockout application.
VHB™ is a trademark of 3M™
Plug & Switch | Lockout / Tagout
800.777.3300 | Panduit.com
Corded AC Plug Cover Lockout Devices
65
AC Plug End Lockout Device
•Insert plugs, close cover, and secure with padlock and tag (sold seperately)
•Individual corded plugs in a wide range of sizes can be locked out
to prevent energization
•Constructed of rugged polypropylene providing strength, durability,
and added security
•Individual plugs in a wide range of sizes can be locked out to prevent energization
•Accommodates padlocks with shackle lengths of 1.50 inches or greater and plugs
with a hole in a blade
•Constructed of rugged polycarbonate providing strength, durability, added security,
and corrosion resistance
Part No.
Description
UOM
PSL-CL110
Lockout fits 120 VAC corded plug,
2.0" x 2.0" x 3.5" inside dimensions
Each
PSL-CL480
Lockout fits 240 – 480 VAC corded plug,
3.25" x 3.25" x 6.50" inside dimensions
Each
Part No.
Description
UOM
PSL-P
Plug Lockout
Each
Network Security Devices
Network security devices block unauthorized access to existing network infrastructure in the data center, at the workstation, in the industrial automation panel, and more. These devices
save time and money associated with network downtime, data security breaches, infrastructure repair, and hardware replacement due to theft. The innovative design of the blockout
device snaps into modules and is released with the removal tool, ensuring the safety and security of the network infrastructure. The versatile design of the lock-in device is compatible
with most existing patch cords, faceplates, patch panels, IP cameras, and other IP devices. It is also compatible with VoIP phones to help prevent unauthorized tampering with
connectivity to ensure E911 continuity.
Removal Tool
PSL-DCJB
PSL-DCJB-BL
PSL-USBA
PSL-DCPLRX
PSL-DCPLRX-BL
Jack Module Blockout Device
RJ45 Plug Lock-In Devices
•Blocks unauthorized access to jacks and potentially harmful foreign objects, saving
time and money associated with data security breaches, network downtime, repair
and hardware replacement
•Compatible with most RJ45 and USB Type ‘A’ jacks to accommodate a variety of
applications and does not interfere with jack contacts separation and punched
hole for hanging
•Can be installed/removed without interfering with adjacent jacks or hardware
•May only be released with the special removal tool, ensuring the safety and security
of your network infrastructure
•Tamper-resistant design blocks unauthorized removal of cable, IP phone,
other networking equipment or critical connection
•Deters unauthorized users from moving or stealing VoIP phones helping to
maintain E911 service
•Compact design does not interfere with adjacent jacks, even in
high-density applications
Part No.
Package Content
Plug Lock-In
Color
Std. Pkg.
Qty. Part No.
Jack Type
Package Content
Blockout
Color
Std. Pkg.
Qty.
PSL-DCPLX
Lock-in devices,
and one installation/removal tool
Red
10
PSL-DCJB
RJ45
RJ45 jack blockout devices
and one removal tool
Red
10
PSL-DCPLX-BL
Lock-in devices
and one installation/removal tool
Black
10
PSL-DCJB-BL
RJ45
RJ45 jack blockout devices
and one removal tool
Black
10
PSL-DCPLRX
Recessed lock-in devices,
and one installation/removal tool
Red
10
PSL-USBA
USB Type ‘A’
USB Type ‘A’ blockout devices
and one removal tool
Red
5
PSL-DCPLRX-BL
Recessed lock-in devices
and one installation/removal tool
Black
10
66
Lockout / Tagout | Group Lockout
Plastic Group Lock Box
Look to view the keys and padlocks in a secure lock box that
is shaped to say STOP!
English, Spanish, and
French labels included.
Four rows of aluminum strips contain 16 hooks to hang keys – identifiable
through the clear front cover. Once closed, holes and slots along the edges
of box and cover align. Secure with up to 42 padlocks (sold separately).
Plus, there is a hole on the left backside for a supervisor’s padlock.
•Cover pry guard edge provides security when using minimal padlocks
•Visible safety red shows through the clear front cover
•Familiar octagon box shape conveys STOP message
•Front cover slides to hinge open
•13" x 13" x 3 1/2" box is made of durable, impact-resistant plastic,
designed for industrial environments
Each padlock represents a worker on the lockout project. Each padlock
removed signifies the worker has completed their portion of the project.
Yet there is no access to the keys of the locked-out devices until the last
padlock is removed.
Additional features of the lock box include:
•Top carry handle for portability to lockout location
•Two rear keyholes for wall mounting
•Flange foot to set down on flat surface
•Front slot to drop in additional keys after lockout procedures have started
Compact Plastic Group Lock Box
Small, portable group lock box goes with you on the job – from the
office to the production floor.
•Slots in lid to insert and store keys of locked-out devices
•Unique twist-to-turn lid for secure close
•Inner pry guard prevents tamper access
•Lid has two see-through windows and carry handle
•Octagon-shaped box in red conveys the STOP message
•7 3/4" x 7 3/4" x 4" box is durable, impact-resistant plastic
Part No.
UOM
PSL-1025
Each
Part No.
UOM
PSL-1026
Each
Metal Group Lock Box
•Manage multiple employees and energy sources involved in a
group lockout procedure
•Accommodates up to 13 padlocks (not included)
•Available in industrial powder-coated or stainless steel construction
•Dimensions: 9.00"W x 6.00"H x 3.25"D
Part No.
Description
UOM
PSL-GLBN
Group Lock Box
Each
PSL-GLBNSS
Stainless Steel Group Lock Box
Each
Padlock | Lockout / Tagout
800.777.3300 | Panduit.com
6-Padlock Lockout Shadow Board Kit
67
6-Padlock Hanger Board Kit
Shadow printed on board shows lockout/tagout devices are
removed for use.
Identifies and displays lockout/tagout devices while storing
supplies – at the same place.
Durable 14" x14" x 0.063" aluminum board has aluminum pronged hooks to
hang padlocks and hasps. A thick, molded, clear, plastic tag pockets measure
4 3/4"H x 3 5/8"W x 2"D.
Durable 14" x 14" x 0.063" aluminum board with metal hooks to hang padlocks
and clear plastic tag pocket.
APKB071211-001KD
20” X 14”
Board shown w/Kit
Kit Contents:
6 Steel Padlocks, 3/4" shackle (keyed differently)
10 Laminated Lockout Tags
10 Plastic Ties
1 Scissor Hasp, 1" opening
1 Scissor Hasp, 1 1/2" opening
Shadow effect
enlarged for detail
Kit Contents:
6 Steel Padlocks, 3/4" shackle(keyed differently)
10 Laminated Lockout Tags
10 Plastic Ties
1 Scissor Hasp, 1" opening
1 Scissor Hasp, 1 1/2" opening
Part No.
Description
Size
UOM
Part No.
Description
Size
UOM
PSL-1010
Board w/Kit
14" x 14"
Each
PSL-1009
Board w/Kit
14" x 14"
Each
PSL-1011
Board Only
14" x 14"
Each
Padlock Overlaminate Label
Self-Laminating Padlock Labels
•Used to identify employees’ locks;
employees sign the label, attach it to
the padlock, and overwrap with the
clear vinyl to protect the legend
•Available in six colors for
departmental coding
•One-piece design is easy to use
•Width: 10.00 inches
•Height: 0.75 inches
TIME TO
REORDER
LOCKOUT
TAGS
TIME TO
REORDER
LOCKOUT
TAGS
Part No.
Color
Std. Pkg.
Qty.
Std. Ctn.
Qty.
PSL-PL1BLKY
Black
25
150
Instantly identify the padlock.
PSL-PL1BLUY
Blue
25
150
•Write on the surface with pen or pencil — name, date, and any other
identification necessary
•9"W x 0.875"H self-adhesive vinyl label has peel-off liner
•Half of label has printed and writable area and the other half is clear to wrap and
protect written area
PSL-PL1GRNY
Green
25
150
PSL-PL1REDY
Red
25
150
PSL-PL1WHTY
White
25
150
PSL-PL1YELY
Yellow
25
150
PSL-PL1REDY-D
Red Label with DANGER header
25
150
PSL-PL1REDY-P
Red Label with DANGER header in Portuguese
25
150
Part No.
Danger Message
Std. Pkg. Qty.
PSL-1028
DO NOT REMOVE THIS LOCK
50
PSL-1029
EQUIPMENT LOCKED OUT
50
Labels are designed with blank write-on area for name and department designation
and can be clearly identified with Panduit permanent marking pens.
68
Lockout / Tagout | Kit
Electrician Lockout Kit
Contractor Lockout Kit
PSL-KT-PWRP
PSL-PK-EAP
Part No.
PSL-PK-EA
PSL-PK-EAP
PSL-PK-EAPX
PSL-PK-EA-F
PSL-PK-EAKS
PSL-PK
Std. Pkg.
Qty.
Kit Contents
(1) Screwdriver
(1) PSL-PK pouch
(1) PSL-8 padlock
(1) PSL-MLD multiple lockout
(1) PSL-WS wall switch lockout
(1) PSL-CBNT “No Tool” circuit breaker lockout
(1) PSL-P plug lockout
(5) PVT-30 blocking tags
1
(1) Screwdriver
(1) PSL-PK pouch
(1) PSL-8 padlock
(1) PSL-MLD multiple lockout
(1) PSL-WS wall switch lockout
(1) PSL-PCBNT PowerLOK™
“No Tool” circuit breaker lockout
(1) PSL-P plug lockout
(5) PVT-30 blocking tags
1
(1) Screwdriver
(1) PSL-PK pouch
(1) PSL-MLD multiple lockout
(1) PSL-WS wall switch lockout
(1) PSL-PCBNT PowerLOK™
“No Tool” circuit breaker lockout
(1) PSL-P plug lockout
(5) PVT-30 blocking tags
1
(1) Screwdriver
(1) PSL-PK pouch
(1) PSL-8 padlock
(1) PSL-MLD multiple lockout
(1) PSL-WS wall switch lockout
(1) PSL-CBNT “No Tool” circuit breaker lockout
(1) PSL-P plug lockout
(5) PVT-30 blocking tags
1
(1) Klein Screwdriver
(1) PSL-PK pouch
(1) PSL-8 red non-conductive lockout padlock
(1) PSL-MLD multiple lockout
(1) PSL-WS wall switch lockout
(1) PSL-CBNT “No Tool” circuit breaker lockout
(1) PSL-P plug lockout
(5) PVT-30 blocking tags
1
Empty pouch for PSL-PK-EA
1
Metal Wall Mount Cabinet
Part No.
Std. Pkg.
Qty.
Kit Contents
(1) Screwdriver
(1) PSL-KT case
(6) PSL-8 padlocks
(1) PSL-1A hasp
(1) PSL-MLD lockout
(3) PSL-WS wall switch lockout
(3) PSL-CBNT “No Tool” circuit breaker lockout (3)
PSL-P plug lockouts
(15) PVT-98 tags
1
PSL-KT-CONAP
(1) Screwdriver
(1) PSL-KT case
(6) PSL-8 padlocks
(1) PSL-1A hasp
(1) PSL-MLD lockout
(3) PSL-WS wall switch lockout
(3) PSL-PCBNT PowerLOK™
“No Tool” circuit breaker lockout
(3) PSL-P plug lockouts
(15) PVT-98 tags
1
PSL-KT-CONAPX
(1) Screwdriver
(1) PSL-KT case
(1) PSL-1A hasp
(1) PSL-MLD lockout
(3) PSL-WS wall switch lockout
(3) PSL-P plug lockouts
(15) PVT-98 tags.
1
PSL-KT-CONA-F
(1) Screwdriver,
(1) PSL-KT case
(6) PSL-8 padlocks
(1) PSL-1A hasp
(1) PSL-MLD lockout
(3) PSL-WS wall switch lockout
(3) PSL-CBNT “No Tool” circuit breaker lockout
(3) PSL-P plug lockouts
(15) PVT-98 “EQUIPMENT LOCKED OUT BY...”
safety tags in French
1
Empty plastic kit box for PSL-KT-CONA
1
PSL-KT-CONA
PSL-KT
Safety Tool Bag
•Conveniently store lockout tools and accessories in one common area
• Durable steel case can be wall-mounted (nine mounting holes) or used as a
portable case
• 14.75" x 10.25" x 4.63"
Part No.
Description
Std. Pkg. Qty.
PSL-STATION
Metal Wall Mount Cabinet
1
Red/Black Polyester Fabric
•Width: 18 inches
•Height: 11 inches
•Depth: 11 inches
Part No.
Color
Std. Pkg.
Qty.
PSL-BG
Red
1
Kit & Cover | Lockout / Tagout
800.777.3300 | Panduit.com
Maintenance Lockout Kit
69
Power and Panel Distribution Lockout Kit
PSL-KT-MROAP
PSL-KT-PWRP
Std. Pkg.
Qty.
Part No.
Kit Content
PSL-KT-MROA
(1) Screwdriver
(1) PSL-BX case
(3) PSL-8 padlocks
(1) PSL-MLD multiple lockout device
(2) PSL-WS wall switch lockout
(2) PSL-CBNT “No Tool” circuit breaker lockout
(2) PSL-P plug lockout
(1) P
SL-V6A gate valve lockout, 2.50" to 6.50" diam. handle
(1) P
SL-V2A gate valve lockout, 1.00" to 2.50" diam. handle
(1) PSL-BV2 ball-valve lockout
(1) PSL-CL110 120 volt AC cord lockout
(10) PVT-44 maintenance tags
PSL-KT-MROAP
(1) Screwdriver
(1) PSL-BX case
(3) PSL-8 padlocks
(1) PSL-MLD multiple lockout device
(2) PSL-WS wall switch lockout
(2) PSL-PCBNT PowerLOK™
“No Tool” circuit breaker lockout
(2) PSL-P plug lockout
(1) P
SL-V6A gate valve lockout, 2.50" to 6.50" diam. handle
(1) P
SL-V2A gate valve lockout, 1.00" to 2.50" diam. handle
(1) P
SL-BV2 ball-valve lockout
(1) PSL-CL110 120 volt AC cord lockout
(10) PVT-44 maintenance tags
PSL-KT-MROAPX
PSL-KT-MROA-F
PSL-BX
1
Part No.
PSL-KT-PWR
(1) Screwdriver
(1) PSL-STATION metal wall mount cabinet
(2) PSL-8 padlocks
(1) PSL-MLD multiple lockout device
(2) PSL-CBNT “No Tool” circuit breaker lockout
(2) PSL-CBILNT “No Tool” circuit breaker lockout
for I-Line™
(2) PSL-CBL large handle circuit breaker lockout
(1) PSL-P plug lockout
(25) PVT-23-Q tags
1
PSL-KT-PWRP
(1) Screwdriver
(1) PSL-STATION metal wall mount cabinet
(2) PSL-8 padlocks
(1) PSL-MLD multiple lockout device
(2) PSL-PCBNT PowerLOK™
“No Tool” circuit breaker lockout
(2) PSL-CBILNT “No Tool” circuit breaker lockout
for I-Line™
(2) PSL-CBL large handle circuit breaker lockout
(1) PSL-P plug lockout
(25) PVT-23-Q tags
1
PSL-KT-PWRPX
(1) Screwdriver
(1) PSL-STATION metal wall mount cabinet
(1) PSL-MLD multiple lockout device
(2) PSL-PCBNT PowerLOK™
“No Tool” circuit breaker lockout
(2) PSL-CBILNT “No Tool” circuit breaker lockout
for I-Line™
(2) PSL-CBL large handle circuit breaker lockout
(1) PSL-P plug lockout
(25) PVT-23-Q tags
1
PSL-KT-PWR-F
(1) Screwdriver
(1) PSL-STATION metal wall mount cabinet
(2) PSL-8 padlocks
(1) PSL-MLD multiple lockout device
(2) PSL-CBNT “No Tool” circuit breaker lockout
(2) PSL-CBILNT “No Tool” circuit breaker lockout
for I-Line™
(2) PSL-CBL large handle circuit breaker lockout
(1) PSL-P plug lockout
(25) PVT-23-Q “DO NOT OPERATE ELECTRICIANS
AT WORK” tags in French
1
1
(1) Screwdriver
(1) PSL-BX case
(1) PSL-MLD multiple lockout device
(2) PSL-WS wall switch lockout
(2) PSL-PCBNT PowerLOK™
“No Tool” circuit breaker lockout
(2) PSL-P plug lockout
(1) P
SL-V6A gate valve lockout, 2.50" to 6.50" diam. handle
(1) P
SL-V2A gate valve lockout, 1.00" to 2.50" diam. handle
(1) PSL-BV2 ball-valve lockout
(1) PSL-CL110 120 volt AC cord lockout
(10) PVT-44 maintenance tags
1
(1) Screwdriver
(1) PSL-BX case
(3) PSL-8 padlocks
(1) PSL-MLD multiple lockout device
(2) PSL-WS wall switch lockout
(2) PSL-CBNT “No Tool” circuit breaker lockout
(2) PSL-P plug lockout
(1) PSL-V6A gate valve lockout, 2.50" to 6.50" diam. handle
(1) PSL-V2A gate valve lockout, 1.00" to 2.50" diam. handle
(1) PSL-BV2 ball-valve lockout
(1) PSL-CL110 120 volt AC cord lockout
(10) PVT-44 “DO NOT OPERATE”
maintenance tags in French
1
Empty plastic kit box for PSL-KT-MROA
1
Std. Pkg.
Qty.
Kit Content
Steering Wheel Covers
Prevent others from driving a vehicle
that is disabled or undergoing
maintenance.
•Flexible, reinforced vinyl cover
•Backside of upper half has stitched pocket
to slip over steering wheel
•Secure cover to steering wheel to prevent
removal
•3/8" metal grommeted hole at bottom
accommodates 1 1/2" hasp with padlocks
(sold separately)
•Octagon shape reinforces lockout status and
conveys STOP
16"
20"
24"
PSL-1075
PSL-1078
PSL-1081
16"
20"
24"
PSL-1076
PSL-1079
PSL-1082
16"
20"
24"
PSL-1077
PSL-1080
PSL-1083
70
Haz-Com / GHS | NFPA & HMCIS
NFPA Placard Sign Kits
NFPA Placard Sign Kits
Display the four-color NFPA diamond format for the hazard
categories.
Easy installation and convenient for instant on-site
classification of chemical hazard identification.
•10" x 7" sign available in 0.040" Aluminum
•Adhesive hazard
panels printed black on
clear to apply on-site
•Kit includes: 1 sign,
15 numbers
(3 sets, 0 – 4),
7 specific hazard
symbols, NFPA
wallet guide
•Kit includes: 1 blank placard, 15 numbers (3 sets
of 0-4), 7 hazard symbols, and NFPA wallet guide
•0.004" Adhesive Vinyl placards with clear,
self-adhesive hazard panels
•Blank colored placards and self-adhesive
hazard panels also available separately
Hazard Panels
UOM
RAD
Kit
COR
ACD
ALK
OXY
SA
Placard Kit
Properly identify the four hazard ratings of
chemicals and materials on hand.
•Post on or in area of chemical containers
•Write in hazard ratings and chemical name
for on-the-spot identification
Code
UOM
Adhesive Vinyl
PVS
Each
Polyethylene Plastic
PRS
Each
Part No.
UOM
Size
UOM
PHC0124
Kit
PHC0082
Each
4" x 4"
PHC0123
Kit
PHC0080
Each
10" x 10"
PHC0125
Kit
PHC0081
Each
15" x 15"
*Add desired hazard panel number or symbol code after part number.
Number Example: Part No. PHC4X4N + Hazard Panel Number 2 = PHC4X4N2
Symbol Example: Part No. PHC4X4 + Symbol Code RAD = PHC4X4RAD
Add material code before part number.
Example: Material Code PVS +
Part No. 1007B4845 = PVS1007B4845
Material
Blank Placard
Part No.
To Order Hazard Panels:
To Order:
Number
Part No.
10" x 7"
1007B4845
Wallet Cards
Symbol
Part No.
Fits Placard
Char. Height
UOM
PHC4X4N*
PHC4X4*
4" x 4"
1"
Each
PHC10X10N*
PHC10X10*
10" x 10"
4"
Each
PHC15X15N*
PHC15X15*
15" x 15"
6"
Each
HMCIS Protective Equipment
PHC0077
Additional sizes and materials available.
Quick reference fits in employee’s pocket.
•Color-printed plastic in three front styles: NFPA, HMCIS and Combo
•Back features hazard rating code index definitions
UOM
•Measures 2 1/8" x 3 3/8"
Each
•Available each
PHC0122
WTR
PHC0127
PHC0126
Hazardous Material Classification Sign
NFPA
Blank
Placard
HMCIS
PHC0078
NFPA Flip Placard Sign
Flip and change panels to reflect any hazard.
•Aluminum flip panels display the hazard rating
required by NFPA 704
•15 1/2" x 15 1/2", 0.063" sturdy, rust-proof
aluminum backboard
•0.120" clear plastic face fits over placard with center screw
•Withstands weather and other environmental conditions
•3/16" corner mounting holes
Part No.
UOM
PHC0128
Each
Chemical Identifier Roll Labels
Comply with OSHA standard 29 CFR §1910.1200,
commonly known as the “Right-To-Know” standard.
Identify hazardous chemicals
with appropriate information.
Hazardous Material Labels
•Write-in chemical name, hazard
ratings and PPE
•Self-Laminating has clear flap to
protect writing
•Adhesive-Poly in Roll of 500
•Self-Laminating Vinyl in Roll of 100
On-the-spot chemical hazard
identification.
NFPA
•Write-in chemical name, hazard
ratings, and PPE information
•Adhesive Vinyl
HMCIS
NFPA Part No.
HMCIS Part No.
Material/Size
Std. Pkg. Qty.
PHC0075
PHC0079
Adhesive-Poly,
1 1/2" x 3 7/8"
500
PHC0076
Self-Laminating
Vinyl, 1" x 3"
100
PHC0074
Size
UOM
3 1/2" x 5"
Each
Haz-Waste & NFPA | Haz-Com / GHS
800.777.3300 | Panduit.com
Drum & Container Labels
Hazardous Material Tags
Attach tags to hazardous material containers that are
difficult to label with adhesive marking.
Tags contain NFPA or HMCIS symbols to help communicate and comply with
OSHA 29 CFR 1910.1200 by conveying important chemical hazard information.
Fill in the hazard code and related information for handling and exposure to
hazardous chemicals.
Use Hazardous Waste tags to comply with EPA (40 CFR part 262.32) and
DOT (49 CFR part 172) regulations to mark hazardous waste.
Front
1118
Back
Back - quick reference to the
hazard code index; definitions.
Front
1119
Back
Back - protective equipment;
chemical’s severity; chemical
name; target organ.
Label drums and containers to identify contents considered
hazardous for handling.
•Available with peel-off liner in: Adhesive Coated Paper and flexible
Adhesive-Poly Sheet
•Labels measure 6" x 6"
•Package of 25 or 100
PCB Labels
Available in
Adhesive-Poly Sheet,
Package of 25 only
Std. Pkg. Qty.
PHC0139
25
PHC0134
Front
1120
Back
Back - chemical name; route of
entry; health hazards; physical
hazards; target organs and effects.
PHC0138
PHC0135
PHC0132
Available Materials Codes
Poly Cardstock
PCTRigid Plastic
PVT-
Front
1124
Back - protective equipment;
chemical’s severity; chemical
name; target organ.
Available Packages Codes
Pk. of 5
(blank)
Pk. of 25
-Q
How to Order Tags:
PHC0136
PHC0137
1

Select Material Code: PCT-
2

Select Tag Base Part Number: 1118
3

Select Package: 5/Pk – (blank); 25/Pk – -Q
4

Combine Codes in Specific Order for Complete Part Number:
5/Pk – PCT-1118; 25/pk – PCT-1118-Q
PHC0133
To Order Labels: Add material/quantity code after part number.
Example: Part No. PHC0139 + Material/Quantity Code PQ = PHC0139PQ
Adhesive Coated Paper
Adhesive-Poly Sheet
Code
Code
Std. Pkg. Qty.
25
PQ
VQ
25
PC
VC
100
Back
71
72
Haz-Com / GHS | GHS
GHS Pictogram Labels
GHS Jumbo Tags
Pictogram labels comply
with the Globally Harmonized System.
• Identify hazards associated with chemicals
• The Hazard Communication Standard (HCS) requires eight of the nine
GHS pictograms
• The environment pictogram is non-mandatory since environmental
hazards fall outside OSHA’s jurisdiction
• Available in Adhesive Coated Paper and Adhesive-Poly Sheet
• 250 or 500 per roll
Attach tags to chemicals in the workplace, and add the appropriate signal
word and GHS pictogram labels to identify the hazards.
1" x 1"
2" x 2"
Flame
PHC02
PHC11
Flame Over Circle
1" x 1"
PHC03
2" x 2"
PHC12
Exploding Bomb
1" x 1"
PHC04
2" x 2"
PHC13
• Large tags with space to write in the product/chemical identification, hazard statements and
additional comments on the back
• Label set of nine pictograms and the two approved signal words “Danger” and “Warning” are
included for each tag and made of Adhesive Vinyl
• Available in two stock materials, in packs of 5
Gas Cylinder
1" x 1"
PHC06
2" x 2"
PHC15
WARNING
DANGER
Corrosion
1" x 1"
PHC05
2" x 2"
PHC14
Label set includes
9 pictograms and
2 signal words
Skull & Crossbones
1" x 1"
PHC07
2" x 2"
PHC16
Refer to Safety Data Sheet
for more information.
Comments
Non-mandatory
Exclamation Mark
1" x 1"
PHC08
2" x 2"
PHC17
Environment
1" x 1"
PHC09
2" x 2"
PHC18
Health Hazard
1" x 1"
PHC10
2" x 2"
PHC19 To Order Labels: Add material/quantity code after part number.
Example: Part No. PHC02 + Material/Quantity Code PB = PHC02PB
1121
1122
1123
Standard Back
To Order Tags: Add material code before part number.
Example: Material Code PCT- + Part No. 1121 = PCT-1121
Adhesive Coated Paper
Adhesive-Poly Sheet
Code
Code
Std. Pkg. Qty.
25
Size
Material
Code
Std. Pkg. Qty.
PS
VS
250
8 1/2" x 3 7/8"
Poly Cardstock
PCT-
5
PB
VB
500
8 1/2" x 3 7/8"
Rigid Plastic
PVT-
5
Reference & Training | Haz-Com / GHS
800.777.3300 | Panduit.com
GHS Hazard Communication Training Kit
73
GHS Wallet Cards
Panduit GHS Hazard Communication
Training Kit provides instruction on OSHA
1910.1200 Hazard Communication
Standard, including changes related to
Globally Harmonized System for the
Classification of Hazardous Chemicals
(GHS). Included is a seventy minute video
with instructor led training on setting up
a Hazard Communication Program and
understanding the new labeling and safety
data sheet requirements. The Companion
CD provided consists of PowerPoint slides,
PDF files of the quiz, training record and
certificate of completion.
English Front
PHC0001
Keep a visual reminder of
GHS label and pictogram
requirements close at hand.
English Back
Part No.
• Double-sided plastic wallet card
• One side shows a representation of the nine standard GHS pictograms,
while the flip side shows a GHS label example
• Measures 3 3/8" x 2 1/8"
Kit Contents
(1) Panduit GHS Hazard Communication Training DVD
(1) Panduit GHS Hazard Communication Training
Companion CD
(1) Leaders Guide
(1) Participant Quiz
(1) Participant Quiz Answers
(1) Training Record
(4) 4" x 6" Acetone GHS label sample
(1) PSL-GHSPOSTE GHS Training Poster
(25) PSL-GHSWALLETE GHS Training Wallet Cards
PSL-GHS-TRAIN
GHS Posters
Part No.
Description
UOM
PHC0001
English
Each
PHC0119
Spanish
Each
Training Posters
Inform employees and support your hazard communication
program.
•Plastic laminated posters provide instructional information regarding
chemical identification and hazard communication
• SDS poster summarizes the information found in the 16 sections OSHA
outlines
in its revised Haz-Com standard
Part No.
Description
UOM
• Haz-Com poster includes
PHC0130
SDS
Each
information pertaining to both
PHC0129
Haz-Com
Each
NFPA and HMCIS
English PHC0131
SDS, 20" x 32"
Post GHS label and
pictogram guidelines
for quick reference.
PHC0130
Sistema Globalmente Armonizado (SGA)
Pictogramas SGA
Etiquetas SGA
• 18" x 24" plastic laminate poster
• Displays easy-to-understand
information on GHS labels and
pictograms
• Label & Pictogram. Guidelines
for quick reference.
La ilustración a continuación identifica los componentes de la etiqueta SGA. El diseño de la etiqueta
actual y el esquema pueden variar y están sujetos a la discreción de la autoridad competente.
Identificador del producto
Pictogramas
Composiciones gráficas
que visualmente transmiten
la información sobre
riesgos específicos.
Debe coincidir con el nombre químico que aparaece
en las Hojas de Datos de Seguridad de (Materiales).
Palabra de advertencia
Número CAS: 67-64-1
Líquido Inflamable de Categoría 2 y
Irritante Ocular de Categoría 2A
ACETONA
PELIGRO
Líquido y vapor muy inflamable.
Causa irritación severa a los ojos.
Declaraciones
de Precaución
Describe las medidas
recomendadas para
minimizar o prevenir los
efectos adversos resultantes
de la exposición.
Manténgase alejado del calor, chispas, y llamas - No fume. Tome medidas de
precaución contra descargas estáticas. Evite la luz solar directa. Mantenga el
envase cerrado cuando no esté en uso. Mantenga en un lugar fresco/bajo en
temperatura, bien ventilado, lejos de fuego y fuentes de ignición. Use solo en un
área bien ventilada. Evite el contacto con los ojos, piel, y ropa. Use el equipo de
protección personal adecuado, evite el contacto directo. Enjuague los ojos con
agua durante al menos 15 minutos manteniendo los párpados abiertos.
Nombre de la Compañía:
Dirección:
Ciudad:
Estado:
Código Postal:
Teléfono:
Indica el nivel relativo de la
gravedad del peligro.
“Peligro” y “Advertencia” son
las palabras de señales del
SGA.
Llama
(Inflamables)
Llama sobre
círculo
Bomba explotando
Botella de gas
Calavera y
tibias cruzadas
(Explosivos)
(Oxidantes)
Indicaciones de Peligro
Una frase asignada a una
clasificación y categoría que
describe la naturaleza de
los riesgos del producto.
Corrosión
(Corrosivos)
(Gases bajo presión)
(Toxicidad aguda)
Identificación del Proveedor
El nombre, dirección y teléfono del fabricante o proveedor.
1.4.10.5.4.1 Ubicación de la información del SGA en la etiqueta
Part No.
Description
UOM
PHC0131
English
Each
PHC0120
Spanish
Each
“Los pictogramas de riesgos del SGA, la palabra de advertencia y las indicaciones de peligro deben estar ubicados juntos
en la etiqueta. La autoridad competente podrá optar por ofrecer un esquema específico para la presentación de estos y para la
presentación de la información preventiva, o permitir la discreción del proveedor.”
Para más información, por favor, consulte la Comisión Económica de las Naciones Unidas para Europa (UNECE) y la
Administración de Seguridad y Salud Ocupacional (OSHA).
Nota: La informacion incluida en este cartel se cree que es correcta y actual. Sin embargo, Accuform no lo garantiza en esta sentido y no es responsable de como
se utilice este producto. Los usuarios son responsables de determinar si el producto es apropiado para sus respectivas aplicaciones. R.2011.
Signo de
exclamación
Medio Ambiente Peligro para la salud
(Peligros acuáticos)
(Irritantes/
Sensibilizadores/
Otros peligros)
(Peligro de
toxicidad especifica)
En la foto aparecen los símbolos de peligro estándar
que se utiliza en el SGA. Los símbolos pueden ser utilizados
individualmente y en combinación para definir el riesgo o
riesgos específicos del producto químico.
Spanish
PHC0120
Haz-Com, 18" x 24"
PHC0129
74
Traffic Signs | Traffic Control Signs
Traffic Signs
Post traffic signs to safely control and regulate the flow of
vehicles and pedestrians.
•Constructed of heavy-duty, 0.080" aluminum, rustproof to withstand
weather conditions
•Reflective face for added bounce-back light visibility from headlights and
other light sources
•Abrasion-resistant face is also UV-resistant to prevent fading for years of
outdoor exposure
•Top and bottom center holes for post- or fence-mount installation
Materials
Engineer-Grade Prismatic – Good choice for added visibility in low-light
conditions. Type I
High-Intensity Prismatic – Better choice for greater visibility with 3X brighter
than Engineer-Grade. Type III, IV, X
Stop Signs & Yield Signs
Engineer-Grade Prismatic
High-Intensity Prismatic
Part No.
Part No.
Size
Engineer-Grade Prismatic
High-Intensity Prismatic
Part No.
Part No.
Size
PTS075
PTS080
18" x 18"
PTS141
PTS140
24" x 24"
PTS186
PTS083
24" x 24"
PTS143
PTS142
30" x 30"
PTS187
PTS084
30" x 30"
PTS145
PTS144
36" x 36"
PTS188
PTS085
36" x 36"
Speed Limit Signs
Engineer-Grade Prismatic
High-Intensity Prismatic
SPEED LIMIT 5
Part No.
SPEED LIMIT 10
Part No.
SPEED LIMIT 15
Part No.
SPEED LIMIT 20
Part No.
SPEED LIMIT 5
Part No.
SPEED LIMIT 10
Part No.
SPEED LIMIT 15
Part No.
SPEED LIMIT 20
Part No.
Size
PTS103
PTS091
PTS093
PTS095
PTS102
PTS090
PTS092
PTS094
18" x 12"
PTS123
PTS111
PTS113
PTS115
PTS122
PTS110
PTS112
PTS114
24" x 18"
Traffic Control Signs | Traffic Signs
800.777.3300 | Panduit.com
75
Parking Signs
Material – Engineer-Grade Prismatic
18" x 12"
PTS051
18" x 12"
PTS065
18" x 12"
PTS069
18" x 12"
PTS067
18" x 12"
PTS068
18" x 12"
PTS070
18" x 12"
18" x 12"
PTS066
18" x 12"
PTS064
18" x 12"
PTS061
18" x 12"
PTS059
18" x 12"
PTS060
18" x 12"
PTS004
18" x 12"
PTS006
18" x 12"
PTS001
18" x 12"
PTS007
18" x 12"
PTS003
18" x 12"
PTS053
18" x 12"
PTS054
18" x 12"
PTS052
18" x 12"
PTS055
18" x 12"
PTS056
18" x 12"
PTS057
PTS063
18" x 12"
PTS058
18" x 12"
PTS062
18" x 12"
PTS005
18" x 12"
PTS002
Traffic Direction Signs
Material – Engineer-Grade Prismatic
24" x 18"
PTS198
24" x 18"
PTS200
18" x 24"
PTS082
18" x 24"
18" x 30"
PTS077
PTS079
18" x 12"
PTS147
18" x 12"
18" x 18"
24" x 24"
30" x 30"
PTS190
PTS192
PTS149
PTS151
24" x 18"
PTS089
18" x 18"
PTS153
24" x 18"
Arrow rt.
Arrow lt.
PTS196
PTS194
18" x 12"
PTS165
24" x 18"
PTS087
18" x 12"
PTS167
76
Traffic Signs | Temporary Traffic Control Signs
Single Spring Sign Stand
Economy-grade, roll-up stand for use in moderate
winds and light traffic conditions.
• Opens quickly and easily to a wide, 66 1/2" x 43 1/2", stable footprint
• Folds to compact size, 6 1/2" x 8 1/2" x 25"
• Powder-coated, galvanized steel frames with non-slip rubber tips
• Weight: 22 lbs.
• For use with 36" or 48" diamond shaped roll-up
construction signs with fiberglass cross-ribs
(sold separately on next page)
• Meets Manual on Uniform Traffic Control Devices (MUTCD)
specifications
NCHRP-350
compliant.
Part No.
UOM
PTS201
Each
Spring-Less Sign Stand
Single coil spring-loaded design adds stability and
flexibility to stand up to wind loads and gusts.
• Leg levers for easy deployment – opens to a wide footprint of 67 1/2" x 42"
• Ergonomic design also allows users to lift up on legs to drop them into place
• Folds to compact size, 8" x 6" x 25 1/4"
• Powder-coated, galvanized steel frames with non-slip rubber tips
• Weight: 24 lbs.
• For use with 36" or 48" diamond shaped roll-up
construction signs with fiberglass cross-ribs
(sold separately on next page)
• Meets Manual on Uniform Traffic Control Devices (MUTCD)
specifications
NCHRP-350
compliant.
Part No.
UOM
PTS202
Each
Temporary Traffic Control Signs | Traffic Signs
800.777.3300 | Panduit.com
77
Roll-Up Construction Signs
Quickly set up highly visible signs for temporary warning of hazard and
construction areas.
• Flexible fabric, quick and easy to setup and takedown – roll up for compact storage
and portability
• Safety orange with contrasting black messages and symbols
• Cross-Ribs (sold separately) insert into four corner pockets, providing rigid support
• Overlay signs snap on to change directional or distance message
Materials:
Mesh Vinyl (V) - Non-reflective, ideal for daytime only applications
Fluorescent Vinyl (F) - Non-reflective, UV stable bright colored vinyl for daytime use only
Reflective Vinyl (R) – High-Intensity retro-reflective fiber reinforced nylon fabric, ideal for
attention getting and low-light conditions
*
36" PTS009
*
36" PTS011
36" Requires Size B Left Overlay
*
*
PTS012
36" PTS013
Requires Size A Left Overlay
*
36" PTS014
To Order :
Add material & size code after part number.
Example: Part No. PTS009 + Material/Size Code V36 = PTS009V36
36" PTS015
36" 36" PTS008
PTS010
Signs
Material & Size Code
Mesh Vinyl
*Available
Overlays
for 36" Size A
Size B
PTS016
for 36" PTS017
for 36" PTS018
for 36" V36
F36
Each
Each
R36
Each
Each
Cross-Ribs
•Constructed of durable
fiberglass material •Inserts into roll-up sign
four-corner pockets
•For use with 36" Roll-Up
Construction Signs
High-Intensity Prismatic
PEDXING
Part No.
SLOW
Part No.
PEDXING
Part No.
Size
PTS163
PTS161
PTS162
PTS160
24" x 24"
—
PTS170
—
PTS169
30" x 30"
SLOW
Part No.
Each
Reflective Vinyl
Rigid support keeps roll-up signs
deployed and visible.
Engineer-Grade Prismatic
36"
Each
Fluorescent Vinyl
PTS019
Cautionary Signs
Overlays*
36"
Part No.
UOM
PTS203
Each
78
Traffic Signs | Traffic Accessories
Steel U-Channel Posts
Cast Iron Base and Steel Post
Everything you need to
post-mount your sign.
•Available in 2 colors, green
or galvanized
•Two lengths –
6-ft., 8-ft.
•Hardware set (sold
separately) includes –
2 bolts, 2 nuts, 4 washers
Price per Each
Length
Green Finish
Part No.
Mount signs with stable post and weighted
base that can be moved as needed.
•Solid, heavyweight cast iron base available
in 14" and 18" diameters
•1 7/8" outside diameter x 48"H steel post can
accommodates sign sizes up to 24" x 24"
•Sign mounting hardware included
Part No.
Base Size
Weight
UOM
PTS179
14" dia.
27 lbs.
Each
PTS180
18" dia.
37 lbs.
Each
Galvanized Finish
UOM
Part No.
UOM
Each
PTS175
Each
Optional wheel attachment for easy
tilting and moving – fits 14" base only.
Standard Weight – 1.12 lb/foot
6-ft.
PTS174
Heavy Weight – 2.00 lb/foot
6-ft.
PTS173
Each
PTS172
Each
8-ft.
PTS176
Each
PTS177
Each
Description
Part No.
UOM
Hardware Set
PTS171
Set
Part No.
UOM
PTS178
Each
Sign sold separately
Portable Sign Stand
Ideal for temporary applications or crosswalks.
Sign Mounting Brackets and Plate
Fence Mount Brackets
•Easily secure your sign to a chain link fence
•Rust-proof aluminum with mounting holes to
attach sign through fence spaces
•6-ft., white powder-coated steel post with pre-drilled
mounting holes
•Base plate with locking pin, and a road-gripping, 40 lb.,
recycled rubber base
•When disassembled, bases nest for easy storage
•NCHRP-350 compliant
Part No.
Fits Sign
UOM
PTS183
12"H
Each
Part No.
Description
UOM
PTS184
18"H
Each
PTS181*
Portable Sign Stand
Each
PTS185
24"H
Each
*Sign sold separately
Sign Mounting Plate
Part No.
Description
UOM
•Keep signs flat when mounting
to U-Channel post
•Includes adaptor ringbolt,
washer, plate and hex nut
•Two sets required per sign
PTS154
Stop Sign Kit
Kit
Part No.
UOM
PTS182
Set
Includes – (1) Portable Sign Stand, (1) 24" x 24"
Engineer-Grade Prismatic Aluminum Stop Sign,
(1) Hardware Set
Blinker Signs
Maximum Visibility in any Environment.
Fence Sign Holder Bracket
•Flashing LED lights, combined with
DG High-Prism sheeting, provide superior
luminance and visibility
•Eco-friendly, 13 watt solar panel, 6VDC
battery charger require no AC
•Low power allows for smaller panel and
cleaner look
•LED automatically measures available light and
adjusts the LED flash brightness accordingly
•Up to 30 day autonomy (flashing 24/7)
•Heavy-duty aluminum construction with fully
enclosed wiring withstands harsh elements
•Attaches to 2 3/8" post with mounting
brackets (sold separately)
•MUTCD-compliant for public roadway use
Post signs and warnings
on chain link fences.
• Galvanized steel bracket
• Universal to work with nearly
any size chain link fence
• Protects signs from damage by distributing pressure along the
surface area of the bracket
• Two brackets required for post mounting
• Includes 5/16"-18 thread, 3/4" long stainless
steel bolt and nylon washer – works well
Part No.
for use with 3/8" sign mounting holes
PBB0080
• Sized to fit most signs
Size
UOM
30" x 30"
Each
30" x 30"
PTS155
30" x 30"
PTS156
UOM
Each
Traffic Control Signs | Traffic Signs
800.777.3300 | Panduit.com
79
Security Stop Safety Signs
12" x 12"
B4221
12" x 12"
B4203
Available Materials
Codes
Adhesive Vinyl (Each)
PVS
Polyester Laminated Vinyl (Each) PLVS
12" x 12"
B4209
Available Sizes Codes
12" x 12"
1212
12" x 12"
B4219
12" x 12"
B4201
How to Order Signs:
1

3

2

4

Select Material Code:
PVS
Select Sign Base Part Number:
B4201
Select Size Code:
1212
Combine Codes in Specific Order
for Complete Part Number: PVS1212B4201
Speed Bump Signs
Engineer-Grade Prismatic – Good choice for added visibility in low-light conditions
24" x 24"
30" x 30"
18" x 12"
PTS157
PTS159
PTS158
18" x 12"
PTS167
18" x 12"
PTS168
Non-Regulatory Traffic Signs
These signs are on non-reflective material. Intended for indoor or non-public roadway use.
STOP
12" x 12" 18" x 18" 24" x 24
B4472
Available Materials
Adhesive Vinyl (Each)
Polyester Laminated Vinyl (Each)
Polyethylene Plastic (Each)
Aluminum (Each)
12" x 12" 18" x 18" 24" x 24
B4481
Codes
PVS
PLVS
PRS
PAS
Available Sizes
12" x 12"
18" x 18"
24" x 24"
Codes
1212
1818
2424
12" x 12" 18" x 18"
B4477
12" x 12" 18" x 18"
B4939
12" x 12" 18" x 18"
B4933
How to Order Signs:
1

3

Select Material Code:
PVS
Select Sign Base Part Number:
B4481
2

4

Select Size Code:
1212
Combine Codes in Specific Order
for Complete Part Number: PVS1212B4481
80
Floor Signs & Tapes | Floor Tapes
Marking Tapes
Reflective Tapes
Colors and combinations meet specific industry and OSHA 29 CFR
§1910.144 warning requirements
•Safety-grade with
‘bounce-back’ reflectivity
•Improved daytime, low-light
and night time visibility
•0.0055" thick urethane tape
•Permanent adhesive with
peel-off liner
•Suitable for outdoor use on
poles, barricades, fences,
buildings, private roads, and
off-road vehicles
Mark specific areas
and promote safety by
identifying potential hazard
areas with visible tapes.
•0.006" vinyl adheres to
floors, walls, piping, posts,
beams, handrails, stairways,
machinery, and equipment
•Waterproof, wear-resistant,
minor resistance to acids, oils,
grease, caustics, alkalis, and
most solvents
•Permanent self-adhesive back
Color/Combination
Solid Colors
White
Gray
Brown
Black
Red
Orange
Yellow
Green
Blue
Purple
Checkerboard and Stripe Pattern
Black/Yellow
Red/White
Black/White
Magenta/Yellow
Green/White
Blue/White
Orange/White
Available colors with color code:
Color
Code
Solid Colors
Black
Blue
Green
Orange
Red
White
Yellow
Stripe Colors
Black/White
Black/Yellow
Orange/White
Red/White
BLK
BLU
GRN
ORN
RED
WHT
YEL
BW
BY
OW
RW
To Order: Add color code after part number.
Example: Part No. PFMR2X15 + Color Code BW = PFMR2X15BW
Code
Application
WHT
GRY
BRN
BLK
RED
ORN
YEL
GRN
BLU
PUR
General Facility
General Facility
General Facility
General Facility
Fire Protection Equipment & Danger Hazards
Danger Points on Machines
Physical Hazards
First Aid & Safety Equipment
Machinery being Worked On
X-ray & Radiation Hazards
BY
RW
BW
MY
GW
BLW
OW
General, Physical Hazards
Fire Protection & Equipment
Housekeeping, Aisles, Traffic, & Passageways
Radiation Areas
Safety & First Aid
Defective Equipment
Traffic and Caution
Part No.
Size
PFMR2X15
2" x 15-ft.
UOM
Roll
PFMR2X30
2" x 30-ft.
Roll
PFMR3X15
3" x 15-ft.
Roll
Message Marking Tapes
Use marking tape with specific message to point out potential
hazard areas.
•Bold contrasting message printed repeatedly
•6-mil vinyl adheres to floors, walls, and equipment
•Clear overlaminate protective film resists dirt,
light chemicals and light abrasions
•Permanent, self-adhesive back
•2" x 54-ft. rolls
UOM
Roll
To Order: Add color code after part number.
Example: Part No. PFM2X36 + Color Code WHT = PFM2X36WHT
Part No.
Size
UOM
PFM2X36
2" x 108-ft.
Roll
PFM2X60
2" x 180-ft.
Roll
Solid Colors
Size
UOM
PFM3X36
3" x 108-ft.
Roll
PFM3X60
3" x 180-ft.
Roll
PFM0114
Solid Colors
Checkerboard Pattern
PFMC2X18
Part No.
PFM0115
Checkerboard Pattern
2" x 54-ft.
Roll
PFM2X18
2" x 54-ft.
Roll
PFM3X18
3" x 54-ft.
Roll
PFM2X36
2" x 108-ft.
Roll
PFM3X36
3" x 108-ft.
Roll
Stripe Pattern
PFMC3X18
3" x 54-ft.
Roll
Stripe Pattern
PFM0116
Floor Tapes | Floor Signs & Tapes
800.777.3300 | Panduit.com
Non-Slip Floor Marking Tapes
81
Non-Slip Floor Marking Shapes
Mark pallets, storage, and walkways in your facility – ideal for
5S programs.
• Self-adhesive 0.004" vinyl
• Protective non-slip,
pebble-textured overlaminate
• Strong acrylic-based adhesive
peel-off back liner
• Adhere to clean, smooth,
dry surface
• Service temperature range:
-20° to 140°F
Color is sub-surface printed
Use non-slip tapes to mark and identify aisles, pathways,
and designated locations in your facility.
Overlaminated non-slip vinyl
pebble-textured surface
Sub-surface printed 0.004" vinyl tapes are overlaminated with a 0.017" clear,
protective pebble-textured tread. The dimpled non-slip surface is ideal for pedestrian
traffic areas.
• Dual-layer, color vinyl and clear textured vinyl construction
• Strong acrylic-based adhesive peel-off back liner
• Adhere to clean, smooth, dry surface
• Service temperature range: -20° to 140°F
• Available in solid colors or with messages
Corner
45˚ Corner
T-Corner
Quad Corner
Footprint
Arrow
Square
Circle, Dot
Triangle
Color is sub-surface printed
Overlaminated non-slip
vinyl pebble-textured surface
To Order Solid Color Tapes:
Add color code after part number: Red – RED,
Orange – ORN, Yellow – YEL, Green – GRN,
Blue – BLU, White – WHT, Black – BLK.
Example: Part No. PFMT2X100 + Color Code YEL = PFMT2X100YEL
Part No.
Size
UOM
PFMT2X100
2"W x 100-ft.
Roll
PFMT3X100
3"W x 100-ft.
Roll
To Order:
Add color code after part number: Red – RED, Orange – ORN, Yellow – YEL,
Green – GRN, Blue – BLU, White – WHT, Black – BLK.
Example: Part No. PFMTS09 + Color Code GRN = PFMTS09GRN
Message Tapes
Part No.
Size
UOM
3"W x 50-ft.
Roll
Size
UOM
PFM0598
PFM0599
STAGING
AREA
STAGING
AREA
PFM0597
FORKLIFT
TRAFFIC
6" x 6"
Each
PFMTS14
3"
Each
12" x 12"
Each
PFMTS15
6"
Each
PFMTS16
12"
Each
PFMTS05
3" x 3"
Each
PFMTS06
6" x 6"
Each
PFMTS20
6"
Each
PFMTS19
12"
Each
PFMTS11
6" x 9"
Each
PFMTS12
8" x 12"
Each
Quad Corner
Square
Circle, Dot
PFMTS03
3" dia
Each
PFMTS04
6" dia
Each
Triangle
PFMTS17
9" x 9"
Each
PFMTS18
12" x 12"
Each
PFMTS07
3"
Each
Part No.
Length
UOM
PFMTS08
6"
Each
Footprints
PFM0601
UOM
PFMTS09
T-Corner
FORKLIFT
TRAFFIC
Size
PFMTS10
45˚ Corner
PFM0600
Part No.
Arrow
Corner
PFMTS01
6"
Pair
PFMTS02
12"
Pair
82
Floor Signs & Tapes | Floor Tapes
Floor Marking Shapes
Mark directional traffic paths or hazardous areas on floors,
stairways, and walls.
•0.005" vinyl
•Individually die-cut shapes
•Aggressive, permanent, self-adhesive back
•Peel-off liner
Available colors with color code:
Red – RED, Blue – BLU, Green – GRN, Black – BLK, Yellow – YEL,
Orange – ORN, White – WHT
To Order:
Add color code after part number.
Example: Part No. PFMD2 + Color Code BLU = PFMD2BLU
Dots
Size*
Std. Pkg. Qty.
UOM
2"
250
Roll
3"
250
Roll
4"
100
Roll
6"
5 Pair
Pkg.
12"
5 Pair
Pkg.
Arrows
Footprints
2"
PFMD2
2"
PFMA2
3"
PFMD3
3"
PFMA3
4"
PFMD4
4"
PFMA4
6"
PFMF6
*Size for: Dot by diameter
*Size for: Arrow measured
by width of point
Glow-in-the-Dark Tapes & Shapes
Visibility and safety in emergency blackout situations
•Photoluminescent tapes and shapes store energy
from any light source
•10-hour glow rating
•0.010" polyester with laminated gloss surface
•Permanent adhesive backing with peel-off liner
Glow-in-the-Dark Tapes
Solid Color
Stripe Pattern
Arrow Pattern
Size
Part No.
UOM
Part No.
UOM
Part No.
UOM
PFM0243
Roll
PFM0246
Roll
PFM0249
Roll
2" x 15-ft.
PFM0244
Roll
PFM0247
Roll
PFM0250
Roll
2" x 30-ft.
PFM0245
Roll
PFM0248
Roll
PFM0251
Roll
3" x 15-ft.
Dots
Arrows
Footprints
Glow-in-the-Dark Shapes
Size
Std. Pkg. Qty.
UOM
2"
50
Roll
3"
50
Roll
6"
1 Pair
Pkg.
12"
1 Pair
Pkg.
2"
PFM0333
2"
PFM0330
6"
PFM0332
3"
PFM0329
3"
PFM0331
12"
PFM0328
12"
PFMF12
*Size for: Footprint is
6" or 12" length
Floor Tapes | Floor Signs & Tapes
800.777.3300 | Panduit.com
Non-Skid Floor Tapes
83
Non-Skid Floor Signs
Create a high-traction surface
to prevent slips, trips, and falls.
OSHA 29 CFR
§1910.24 (f)
•Durable surface provides good grip,
wear resistance, and water resistance
•Suitable for indoor and outdoor environments
•Resists sliding, buckling, wrinkling, and peeling
•Black tape is 60-grit aluminum oxide compound
layer fused onto thick PVC base; colored
and striped tapes are 46-grit
•High-tack acrylic adhesive back
•Peel-off liner
High-traction, anti-skid, clear grit
surface. 6" x 24". Sub-surface
printed vinyl floor signs. High-tack,
acrylic adhesive back. Peel-off liner.
UOM
Each
PFM0040
PFM0041
RESTRICTED AREA
Part No.
Size
UOM
PFM0090
1" x 60-ft.
Roll
PFM0092
2" x 60-ft.
Roll
PFM0094
3" x 60-ft.
Roll
PFM0095
4" x 60-ft.
Roll
PFM0097
6" x 60-ft.
Roll
Solid Black
PFM0042
PFM0046
PFM0045
PFM0043
PFM0047
PFM0044
Non-Skid Floor Shape Tapes
Get a finished look to your
anti-skid tapes in pre-cut
shapes.
Part No.
Size
UOM
PFM0091
1" x 60-ft.
Roll
PFM0093
2" x 60-ft.
Roll
PFM0096
4" x 60-ft.
Roll
•Rounded corners to prevent
corners from lifting
•Aggressive 60-grit aluminum
oxide compound layer fused onto
a thick PVC base
•Peel-off liner with high-tack acrylic
adhesive back
•Suitable for indoor and outdoor environments,
water resistant
Solid Yellow
PFM0103
2" x 60-ft.
Roll
PFM0105
4" x 60-ft.
Roll
Square
Wide Strip
Striped Black/Yellow
Cleat
Cleat w/ Reflective Yellow
Cleat w/ Glow
•Muted yellow appearance masks
dirt and grime
Part No.
Size
UOM
Muted Yellow w/ Black Particles
PFM0107
2" x 60-ft.
Roll
PFM0108
4" x 60-ft.
Roll
Part No.
Description
Size
UOM
PFM0110
Square
5 1/2" x 5 1/2"
Each
PFM0109
Wide Strip
3" x 24"
Each
PFM0111
Cleat
6" x 24"
Each
PFM0112
Cleat w/ Refl. Yellow
6" x 24"
Each
PFM0113
Cleat w/ Glow
6" x 24"
Each
84
Floor Signs & Tapes | Floor Tapes
Floor Label Frame System
High Performance Marking Tapes
Heavy-duty composite tape outperforms standard floor marking tapes.
Printed 0.002" polyester tape with 2-mil gloss overlaminate provides superior durability
for industrial facility and high plant traffic.
• High-gloss surface resists
marks and smudges
• Resistant to abrasions,
water, chemicals and heat
• High tack, acrylic adhesive
back minimizes peel or lift
• Applies to clean, noncoated, smooth or rough
surfaces, including concrete
• Low-profile reduces tears
and scratches from skids
and pallet jacks
• Removes easily without
leaving residue or damage
to the floor
• Minimum application
temperature: 50°F
• Available in solid colors or
with messages
Place and protect message, barcode and other identification on
the floor in a sturdy frame system.
Metal frame mounts directly to the floor with four concrete screws (included) and
contains a clear protective cover to protect your label (not included) underneath.
Beveled edges prevent damage from rollover of pallet jacks and forklift vehicles.
Concrete
Screws
Clear
protective
cover
Label
frame
Your Label
Small size:
• 8 1/2" x 5 1/2" x 1/8" all-aluminum oval frame
• 3 1/2" x 5" x 0.063" clear visible protective polycarbonate cover
Large size:
• 12" x 7 1/2" x 1/8" all-aluminum oval frame
• 5" x 7" x 0.063" clear visible protective polycarbonate cover
To Order Solid Color Tapes: Add color code after part number: Red – RED,
Small Part No.
Large Part No.
Std, Pkg. Qty.
UOM
PBB0085
PBB0086
Each
Each
PBB0081
PFM0001
10
Pkg.
PBB0083
PFM0002
25
Pkg.
PBB0084
PFM0003
50
Pkg.
PBB0082
PFM0004
100
Pkg.
Orange – ORN, Yellow – YEL, Green – GRN, Blue – BLU, White – WHT, Black – BLK.
Example: Part No. PFMH2X100 + Color Code BLK = PFMH2X100BLK
Part No.
Size
PFMH2X100
2"W x 100-ft.
Roll
PFMH3X100
3"W x 100-ft.
Roll
Size
UOM
Roll
PFM0268
PFM0270
PFM0269
RESTRICTED
AREA
Textured Marking Tapes
Low-profile grip vinyl
tapes are ideal for
indoor/outdoor and wet
or dry environments.
Message Tapes
3"W x 50-ft.
UOM
• Reinforced vinyl with
weather-proof adhesive
system
• Slip-resistant, mild
abrasive surface
• Install on smooth, clean
and dry surfaces
• Low level reflectivity
• 3"W x 108-ft. long rolls
• Service temperature
range: 0° to 150°F RESTRICTED
AREA
PFM0267
PFM0266
To Order: Add color code after part number:
PFM0271
Red – RED, Blue – BLU, Yellow – YEL,
White – WHT, Green – GRN.
Example: Part No. PFMT3X36 + Color Code YEL = PFMT3X36YEL
Part No.
UOM
PFMT3X36
Roll
Floor Signs | Floor Signs & Tapes
800.777.3300 | Panduit.com
Non-Slip Shape Floor Signs
85
Pavement-Print Signs
Grab attention with non-slip floor message signs.
•Bold colors and graphics in unique shapes
•Self-adhesive vinyl floor signs are sub-surface printed
•Overlaminated with pebble-textured, non-slip layer
•Can withstand heavy foot traffic
•Permanent adhesive back with peel-off liner
•Signs adhere to smooth, clean, and dry surface
Diamond
17"
17"
17"
PFM0054
PFM0057
PFM0060
17"
17"
17"
PFM0055
PFM0058
PFM0062
17"
17"
17"
PFM0056
PFM0059
Place message and graphic signs outdoors on pavement.
• Adheres to asphalt, concrete and step-stones
• Conforms to rough, untreated surfaces like stone and cement
• High-performance adhesive back, foil-base material
• Non-laminate surface contains embedded glass beads for
a non-slip texture - meeting NFSI and ASTM D2047 specifications
• Withstands normal to heavy walking foot traffic and
other abrasions
• Apply to swept, clean, dry surface
• Application temperature range: 50° to 100°F
• For short- to long-term applications
• Removes easily, usually without any residues
17" PFM0083
PFM0061
17" PFM0082
17" PFM0078
17" PFM0088
17" PFM0080
17" PFM0081
17" PFM0085
17" PFM0079
17" PFM0087
17" PFM0077
17" PFM0089
17" PFM0086
17" PFM0084
Triangle
17"
17"
PFM0071
PFM0073
17"
17"
PFM0074
PFM0075
17"
17"
PFM0072
PFM0076
86
Floor Signs & Tapes | Floor Signs
Non-Slip Floor Signs
Non-slip, pebble-textured, clear surface
withstands heavy pedestrian traffic.
Image is sub-surface printed. Permanent,
self-adhesive vinyl with peel-off liner.
Description
UOM
Round-Style
Each
Round-Style Glow Adhesive
Each
Mat-Style
Each
Step-Style
Each
Round-Style
17"
PFM0009
17"
PFM0029
17"
PFM0033
17"
PFM0030
17"
PFM0016
17"
PFM0011
17"
PFM0008
17"
PFM0031
17"
PFM0020
17"
PFM0026
17"
PFM0022
17"
PFM0027
17"
PFM0017
17"
PFM0018
17"
PFM0023
17"
PFM0034
17"
PFM0010
17"
PFM0028
17"
PFM0015
17"
PFM0019
17"
PFM0012
17"
PFM0032
17"
20" x 14"
PFM0069
17"
PFM0014
PFM0037
17"
PFM0013
17"
PFM0024
17"
17"
PFM0025
17"
PFM0021
17"
PFM0036
PFM0035
Mat-style
20" x 14"
PFM0063
20" x 14"
20" x 14" PFM0065
PFM0064
20" x 14"
PFM0067
20" x 14"
PFM0068
Step-Style
20" x 14"
PFM0066
20" x 14" PFM0070
6" x 24"
PFM0048
6" x 24"
PFM0053
6" x 24"
PFM0051
6" x 24"
PFM0050
6" x 24"
PFM0052
6" x 24"
PFM0049
Cones | Barriers & Barricades
800.777.3300 | Panduit.com
Cone Top Warning Signs
87
Cones
Brightly colored cones are ideal to
mark hazardous areas.
Temporarily and quickly direct
facility traffic.
Meets
applicable
MUTCD
and State
Standards
•Durable, flexible spring-back design
•Molded PVC (Poly-Vinyl-Chloride) plastic
•UV stabilizers for fade resistance
•Stackable for easy transport and storage
•Slips into top of any standard,
flexible traffic cone
•Rugged, 0.060" plastic
•Same message both sides
•Weather- and fade-resistant
•10" x 14"
Part No.
Height
Weight
UOM
All Red/Orange - Standard
UOM
PBB0165
12"
1.5 lbs
Each
Each
PBB0126
18"
3 lbs
Each
PBB0167
28"
7 lbs
Each
PBB0169
36"
10 lbs
Each
PBB0170
36"
12 lbs
Each
PBB0067
All Red/Orange - w/ reflective collars
Cone sold separately
PBB0072
PBB0070
PBB0071
28"
7 lbs
Each
PBB0022
36"
12 lbs
Each
Fluorescent Yellow/Green - Standard
PBB0077
PBB0017
PBB0166
18"
3 lbs
PBB0168
28"
7 lbs
Each
Each
PBB0171
36"
10 lbs
Each
Universal Cone Adapter
Universal Cone Adapter fits most standard traffic cones.
•Quickly and easily mount signs, flags and lights
•Can also be used with rope or barricade tape to form various
sized barriers
PBB0069
PBB0068
PBB0073
PBB0074
Orange No.
Yellow Part No.
UOM
PBB0065
PBB0066
Each
Pennant Flag Tapes
Attention-getting pennant flag
tapes warn of hazardous areas.
Standard style
•9" x 12" red, polyethylene
plastic pennants
•Sewn onto durable cord approx. 66" lead cord each end
•Ideal for indoor and temporary
outdoor applications
Heavy-Duty style
•Large 18" x 18" fluorescent orange
9-oz. vinyl laminated, nylon pennants
•Tough, tear-resistant
•Sewn onto high-tensile strength
cord - approx. 20-ft. lead each end
•Ideal for extended periods outdoors,
withstands harsh conditions
Standard
OSHA-Compliant style
Heavy-Duty
• Large 18" x 18", fluorescent orange
9-oz. vinyl laminated, nylon pennants
• Sewn onto heavy-duty reinforced
chord that exceeds OSHA’s 500 lb.
tensile strength requirements
• Meets OSHA 1926.502(f)(2)(iv)
withstanding the harshest conditions
Description
No. of
Pennants
UOM
60-ft.
36
Each
PFM0038
83-ft.
15
Each
PBB0004
113-ft.
25
Each
Part No.
PBB0025
OSHA-Compliant Style
PFM0039
83-ft.
15
Each
PBB0003
113-ft.
25
Each
Sign and cone sold separately
88
Barriers & Barricades | Tapes & Rope
Plastic Barricade Tapes
Quick and effective temporary way to section-off
hazards and danger zones.
•Bold warning message continuously repeated
the length of the roll
•Lightweight, 0.003" polyethylene plastic
•Durable for indoor and outdoor environments
•Easily cut and secure with nails, tape, staples or tie-off
•3" x 1000-ft.
PBB0034
PBB0041
PBB0076
PBB0040
PBB0037
PBB0038
PBB0036
PBB0035
PBB0030
PBB0039
PBB0029
PBB0031
PBB0033
PBB0032
PBB0042
Comply with requirements
of ANSI Z535.5-3.2
UOM
Roll
PBB0175
Woven Barricade Tapes
Mark off hazard areas with extra-strong, durable polypropylene tapes.
•Woven polypropylene
•300-lbs. tensile strength
•Chemical- and
weather-resistant
•Ideal outdoor use
• Reusable
•2" x 200-ft. rolls
Barricade Rope
Part No.
Color
UOM
PBB0173
Black/Red
Roll
PBB0174
Black/Yellow
Roll
Reflective Plastic Barricade Tapes
Mark off restricted and
hazardous areas with
high visibility rope.
Get reflective visibility
in low light areas.
•0.003" polyethylene tape
•Words alternate in black
and reflective silver print
•3" x 1000-ft.
•Twisted strands in
two-tone, contrasting
safety colors
•5/16" diameter
polypropylene
•Floats, resistant to mildew
and light chemical exposure
•600-ft. per roll
UOM
Roll
PBB0023
Black/Yellow Part No.
Magenta/Yellow Part No.
Red/White Part No.
UOM
PFM0005
PFM0006
PFM0007
Roll
PBB0024
Free Standing Signs | Barriers & Barricades
800.777.3300 | Panduit.com
Free Standing Signs
Set out free-standing signs to identify
temporary hazardous conditions.
•Panels have message on both sides
•Rugged 0.125" thick high-impact plastic
•Folds flat for transport and storage
•20"H x 12"W
UOM
Each
7" x 5" clear pocket for holding a
tag or folded permit sheet.
PBB0108
PBB0095
PBB0089
PBB0058
PBB0091
PBB0090
PBB0087
PBB0096
PBB0102
PBB0075
PBB0097
PBB0099
PBB0100
PBB0098
PBB0101
PBB0092
PBB0103
PBB0088
PBB0093
PBB0105
PBB0107
PBB0094
PBB0104
PBB0106
89
90
Barriers & Barricades | Free Standing Signs
Reversible Free Standing Signs
Mark temporary hazards with lightweight plastic
stand-up signs.
•Versatile - two signs in one!
•Rugged 0.125" thick high-impact plastic
•Economical - ideal for limited purposes or disposable for one-time use
•Flip and fold sign inside-out to reveal second message
•Lightweight, waterproof corrugated plastic with fold-and-insert-tab
•Stands 20"H x 12"W
•Carry handle cut-out on top
•Folds flat
Reverse
Reverse
PBB0130
PBB0132
Reverse
PBB0128
Reverse
Reverse
PBB0135
PBB0134
Reverse
Reverse
PBB0136
Reverse
PBB0129
PBB0131
Reverse
PBB0137
UOM
Each
Reverse
Reverse
PBB0127
PBB0133
Molded 2-Sided Free Standing Signs
Open up floor signs to mark
temporary hazards.
•Sturdy molded plastic to withstand
elements indoors and outdoors
•Message on both sides of the
12"W x 25"H Free Standing Signs
stand-up floor sign
•Easy-carry handle
•Sign folds flat for storage
UOM
Each
PBB0018
PBB0020
PBB0021
PBB0019
Post Barriers | Barriers & Barricades
800.777.3300 | Panduit.com
Stanchion Post
91
Barrier Cone Bars
Unique, industrial design ideal for plant or facility.
• All-plastic, yellow, polyethylene post and base
• 3" dia. post stands 38"H with 16"W, low-profile
fillable base
• Base has pre-drilled holes to secure to floor
• Snap lock ensures post will not pull out from
base when lifted and moved
• Breaks down and stacks for compact storage
• Finishing cap and C-Hooks included
• Optional color striping in standard and specialty
reflective, fluorescent, or glow-in-the-dark
• Connect several posts with 2" x 1" x 1/4" Plastic
Chain Links sold separately by the foot
Standard Yellow Post
Part No.
Height
UOM
PBB0149
38"
Each
Striped Post
Yellow Post w/ Standard Color Vinyl Stripe
Color
Code
Red
Green
Black
White
Blue
Orange
Magenta
RED
GRN
BLK
WHT
BLU
ORN
MAG
Add stripe color code after part number.
Example: Part No. PBB0150 +
Color Code MAG = PBB0150MAG
Part No.
Height
UOM
PBB0150
38"
Each
Yellow Post w/ Specialty Color Vinyl Stripe
Color
Code
Reflective Red
Reflective Yellow
Reflective White
Fluorescent Red
Fluorescent Orange
Fluorescent Green
Glow-in-the-Dark
RRED
RYEL
RWHT
REDF
ORNF
GRNF
GLOW
Add specialty stripe color code after part number.
Example: Part No. PBB0152 +
Color Code RRED = PBB0152RRED
Part No.
Height
UOM
PBB0152
38"
Each
Cones sold separately
In an immediate situation, deploy a bar – placed between two traffic
cones – to create a quick and temporary visible barrier.
•Portable, expandable barrier bar
•Ring-ends fit over traffic cones
•Expands up to 6 1/2-ft.
•Collapses to 4-ft. for storage and transport
•Available in two contrasting colors
•Reflective strips for visibility in low light conditions
Part No.
Color
UOM
PBB0078
Black/Yellow
Each
PBB0079
Orange/White
Each
Ring Weight
Prevent post from easily tipping.
Fill vinyl ring weight with water to add
3-lbs. for stability. The 11 3/4" x 1"
ring weight fits and conceals inside
the base of the post.
Part No.
UOM
PBB0148
Each
92
Barriers & Barricades | Post Barriers
Chain Links
Retractable Banner Barrier
•Lightweight, yet strong
polyethylene plastic
•Each link measures 2" x 1" x 1/4"
•Alternating colors change every
two feet
•Available by the foot up to 500-ft.
•Indoor and limited outdoor use
White – WHT
Yellow – YEL
Black – BLK
Red – RED
Alternating
White & Red – RW
PBB0026
Alternating
Black & Yellow – BY
Convey safety or
warning messages
with bold barriers.
To Order Chain Links:
Add color code after part number.
Example: Part No. PBB0115 + Color Code YEL = PBB0115YEL
Part No.
Description
Color Code
PBB0115
Standard
WHT, YEL, BLK, RED
UOM
Foot
PBB0115
Alternating
RW, BY
Foot
Part No.
Description
Color Code
Std. Pkg. Qty.
PBB0119
Standard
WHT, YEL, BLK, RED
100 ft.
Master Link
S-Hooks
•Permanently joins
separate lengths
of chain
•Open ends quickly
link separate lengths
of chain
• 0.060" aluminum roller
housing holds 40"H x 54"W
poly-vinyl banner
• Total viewable area:
32"H x 54"W
• Banner housing connects to
Stanchion Posts via
(2) paddle sleeves (included)
that insert into interchangeable
accessory caps (2 included)
• Sets up and breaks
down easily
PBB0027
PPE REQUIRED
BEYOND
THIS POINT
UOM
Each
PBB0028
To Order Chain Accessories:
Add color code after part number.
Example: Part No. PBB0109 + Color Code WHT = PBB0109WHT
Part No.
Description
Color Code
UOM
PBB0109
Master Link Standard
WHT, YEL, BLK, RED
Each
PBB0138
S-Hook Standard
WHT, YEL, BLK, RED
Each
Extend belt tape from the
end of a storage rack.
Steel Safety Post & Chain
Set out a sturdy post and chain system that stays in place.
Steel Post
•2" dia. x 34" H powder-coated yellow steel
•13.5" dia. base covered with
durable, black ABS plastic
•Forged universal loop on top
•Indoor and outdoor use
Steel Chain
Rack Mount Retractable Belt Tape Barriers
•Mount with choice of hose
clamp for semi-permanent
installation or magnet for quick
install and removal
•Durable 2" wide belt tape end
has S-Clip to wrap and secure
•Yellow case with diagonal
yellow/black striped tape or
‘Caution’ message tape
Bolt Snap
•Poly-coated yellow steel
•4" nickel-plated cast zinc
•2/0 straight link coil - 0.18" material dia., •Double-ended
1.29" inside length x 0.34" inside width
(Maximum continuous length is 120 ft.)
To Order: Add belt style code after part number. Black/Yellow – BY, Caution – C
Example: Part No. PBB0006 + Belt Style Code BY = PBB0006BY
Hose Clamp
Magnetic Mount
Part No.
Description
UOM
Part No.
UOM
Belt Length
Part No.
UOM
Belt Length
PBB0164
Steel Post
Each
PBB0006
Each
15-ft.
PBB0007
Each
15-ft.
PBB0057
Bolt Snap
Each
PBB0009
Each
20-ft.
PBB0011
Each
20-ft.
PBB0123
Poly-Coated Steel Chain
Foot
PBB0013
Each
25-ft.
PBB0015
Each
25-ft.
Post Barriers | Barriers & Barricades
800.777.3300 | Panduit.com
93
Retractable Belt Tape Barriers
Connect belt tape in any combination of posts and wall mounts to control pedestrian traffic indoors.
Belt Tape:
• Woven-polyester tape, wound in a self-tension, spring-loaded unit
• 2"W tape extends up to 8-ft – with straight tension without sag or slack
• Retracts smoothly back into the head unit for storage
• Safety mechanism in the spring-tension reduces the whip
action of the belt braking, in case of accidental release
To Order Post Barriers: Add belt tape color code after
Post Barriers part number: Black – BLK, Yellow – YEL, Red – RED.
Example: Part No. PBB0177 + Color Code BLK = PBB0177BLK
Post Barriers:
• 2 1/2" dia. x 38"H with 14" dia. weighted base
• Available as Post Barrier with Belt Tape or as Receiver Posts
(do not contain belt tape)
Wall Mount Retractable Belt Tape Barriers
Receiver Posts Only (Without Belt Tape)
Part No.
Post Color
UOM
Part No.
Post Color
PBB0177
Brushed Steel
Each
PBB0181STL
Brushed Steel
Each
PBB0178
Black
Each
PBB0181BLK
Black
Each
PBB0179
Yellow
Each
PBB0181YEL
Yellow
Each
Outdoor Retractable Belt Tape Barriers
Close off doorways
or hallways.
Sturdy aluminum stanchion is ideal for use
outdoors and in tough indoor environments
• 2"W woven-polyester
tape, wound in
self-tension,
spring-loaded unit
• Extends up to 8-ft.
without sagging,
retracts smoothly
• Head unit with bracket
installs with four screws
• Wall Mount Receiver (sold separately) connects end of belt tape to facing wall
• 2 1/2" diameter aluminum post measures 40" high
with a sturdy 14" diameter base
• Uses rust-proof stainless steel hardware
• Belt top has 2" wide retractable belt tape with
ergonomic, rounded corner belt end and noticeable
red slide action lock
• Can accept up to 3 additional belt ends from other
belt tape posts
• Available with either 10-ft. or 15-ft. belt tape with
contrasting black and yellow hazard stripes.
• Receiver Posts available separately
To Order: Add belt tape color code after part number:
Black – BLK, Yellow – YEL, Red – RED.
Example: Part No. PBB0045 + Color Code YEL = PBB0045YEL
Part No.
Description
UOM
PBB0001
Black Post, Head, & Base
Each
PBB0002
Yellow Post, Black Head & Base
Each
Aluminum Receiver Posts
Part No.
Case Color
UOM
PBB0045
Brushed Steel
Each
PBB0043
Black
Each
Part No.
UOM
PBB0049
Yellow
Each
PBB0172
Each
Wall Mount Receiver
Accepts up to 4 belts. Does not contain belt tape.
Part No.
Description
UOM
PBB0124
Black
Each
PBB0125
Yellow
Each
UOM
94
Motivation | Scoreboards
Electronic Safety Scoreboards
Count the number of safe work days in two colors.
• Innovative, durable, frameless construction
• Count days without an accident in green, and if a lost time
accident occurs, set the display back to red until you meet your
new safe-days goal
• Display can be set to count days or flash between days, date
and clock
• Track the 7-day week, or set the display to track only your
company’s work days
• Display count can be set to freeze or hold
• In a power failure, all information is stored*
• Tamper-proof display easily sets with handheld remote control
*Indicators notify when a hold or power failure has occurred
Specifications:
•For indoor use only
•28" x 20" x 2" aluminum construction
•Built-in hidden rear mounting brackets
•Four-digit, bright LED display with 2 1/2"H numbers
•Operates on 110 VAC with 6-ft. power cord
PSTB009
PSTB010
PSTB007
PSTB006
PSTB005
PSTB008+
UOM
Each
Automatically count safe work days with 2 color LED display – red
and green.
+
Scoreboards featuring “BEST PREVIOUS RECORD” include: One (1) electronic display to count safe days
and one (1) magnetic display with changeable numbers set to track record number of days.
Turn-A-Day Scoreboards
Write-A-Day Scoreboards
Update safe working days on large
scoreboard by writing in the
number with dry-erase marker.
•Keep score of consecutive days
•Wipe-off and write-in on poly-coated
space provided
•Constructed of durable plastic
•Corner mounting holes
Size
UOM
20" x 14"
Each
36" x 24"
Each
Marker not included.
Safety scoreboard has built-in
turn dial to display safe days.
•Number dials are plastic and
independently rotate from behind
•Lightweight, durable plastic
•Corner mounting holes
UOM
Each
36" x 24"
PSTB001
36" x 24"
PSTB003
36" x 24"
PSTB004
20" x 14"
PSTB002
AC Plug Lockouts – Network Plugs | Index
800.777.3300 | Panduit.com
A
AC Plug Lockouts. . . . . . . . . . . . . . . . . . . . . . . . . 65
Accident Prevention Signs & Labels . . . . . . . . 3–34
ADA Parking Signs. . . . . . . . . . . . . . . . . . . . . . . . 75
Adhesive Vinyl Signs. . . . . . . . . . . . . . . . . . . . . . . 5
Admittance Signs. . . . . . . . . . . . . . . . . . . . . . . . 6–8
AED Signs & Labels. . . . . . . . . . . . . . . . . . . . 22, 33
A-Frame Signs. . . . . . . . . . . . . . . . . . . . . . . . 89, 90
Aisle Marking Tapes. . . . . . . . . . . . . . . . . . . . 80–84
Aluminum:
Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tag Hasps. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Ammonia Pipe Markers. . . . . . . . . . . . . . . . . . . . 58
ANSI Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Anti-Skid Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Arc Flash Labels . . . . . . . . . . . . . . . . . . . . . . 16, 51
Arrow Tapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Arrows, Marking. . . . . . . . . . . . . . . . . . . . . . . 81, 82
Asphalt Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Authorized Signs . . . . . . . . . . . . . . . . . . . . . 6, 7, 30
B
Bag, Lockout Tagout Tool . . . . . . . . . . . . . . . . . . . 68
Ball Valve Lockouts . . . . . . . . . . . . . . . . . . . . . . . 63
Barricade Rope . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Barricade Tags. . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Barricade Tapes. . . . . . . . . . . . . . . . . . . . . . . . . . 88
Barricades,
Expandable. . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Retractable Belt Tape. . . . . . . . . . . . . . . . . . . . 93
Barrier:
Cone Bars. . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Rope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Barriers,
Confined Space Cross. . . . . . . . . . . . . . . . . . . 12
Belt Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Pennant Tape. . . . . . . . . . . . . . . . . . . . . . . . . . 87
Retractable Belt Tape. . . . . . . . . . . . . . . . . . . . 93
Bathroom Signs. . . . . . . . . . . . . . . . . . . . . . . 24, 33
Belt Tape Barriers & Posts. . . . . . . . . . . . . . . . . . 93
Blank Dots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Blank:
Header Signs. . . . . . . . . . . . . . . . . . . . . . . . . . 34
Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Blinker Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Blockout, Jack Module & Plug . . . . . . . . . . . . . . . 65
Boards, Confined Space Permit Holder. . . . . . . . . 12
Boards, Padlock Hanger. . . . . . . . . . . . . . . . . . . . 67
Boxes, Group Lockout. . . . . . . . . . . . . . . . . . . . . . 66
Brackets, Fence Sign . . . . . . . . . . . . . . . . . . . . . . 78
Brass Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Button Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
C
Cabinet, Lockout Tagout. . . . . . . . . . . . . . . . . . . . 68
Cable:
Clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Hasps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48–50
Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Markers. . . . . . . . . . . . . . . . . . . . . . . . 17, 48–50
Tie Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Calibration Labels . . . . . . . . . . . . . . . . . . . . . . . . 20
Cardstock Tags. . . . . . . . . . . . . . . . . . . . . . . 35, 43
Cartridges, Label . . . . . . . . . . . . . . . . . . . . . . . . . 52
Chain, Plastic. . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Chain Barricades. . . . . . . . . . . . . . . . . . . . . . . . . 92
Chain Barriers . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Character Markers. . . . . . . . . . . . . . . . . . . . . . . . 29
Characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chemical:
Hazard Labels, Placards and Signs . . . . . . 70–73
Hazard Posters . . . . . . . . . . . . . . . . . . . . . . . . 73
Hazard Tags . . . . . . . . . . . . . . . . . . . . . . . 71, 72
Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54–58
Markers. . . . . . . . . . . . . . . . . . . . . . . . . . . 54–58
Safety Signs & Labels. . . . . . . . . . . . . . . . . . . 10
Chock Wheels Signs . . . . . . . . . . . . . . . . . . . . . . 27
Cinch Lockout Hasps. . . . . . . . . . . . . . . . . . . . . . 62
Cinch-Cable Locks. . . . . . . . . . . . . . . . . . . . . . . . 62
Circles, Marking. . . . . . . . . . . . . . . . . . . . . . . 81, 82
Circuit Breaker Lockouts . . . . . . . . . . . . . . . . 61, 62
Clamp:
Clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Clearance Signs. . . . . . . . . . . . . . . . . . . . . . . . . . 27
Clips,
Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Concrete Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Conductor Labels. . . . . . . . . . . . . . . . . . . . . . . . . 18
Conduit Markers . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cone Bars, Barrier . . . . . . . . . . . . . . . . . . . . . . . . 91
Cone Top Warning Signs . . . . . . . . . . . . . . . . . . . 87
Cones, Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Confined Space:
Cross Barriers. . . . . . . . . . . . . . . . . . . . . . . . . 12
Entry Permits. . . . . . . . . . . . . . . . . . . . . . . . . 12
Permit Holder Boards. . . . . . . . . . . . . . . . . . . . 12
Permit Holders. . . . . . . . . . . . . . . . . . . . . . . . 12
Signs & Labels . . . . . . . . . . . . . . . . . . . . . 11, 30
Stencils. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Construction Signs. . . . . . . . . . . . . . . 13, 14, 76, 77
Cord Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Corners, Marking. . . . . . . . . . . . . . . . . . . . . . 81, 82
Covers,
Push Button . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Steering Wheel. . . . . . . . . . . . . . . . . . . . . . . . 68
Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Crane Signal Wallet Cards. . . . . . . . . . . . . . . . . . 13
Cross Barrier, Confined Space. . . . . . . . . . . . . . . 12
Cylinder Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Cylinder Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
D
Decals, Helmet. . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Direction Signs . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Directional Flow Arrow Tapes . . . . . . . . . . . . . . . 56
Dispenser, Label. . . . . . . . . . . . . . . . . . . . 18, 20, 49
Dots,
Blank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Marking. . . . . . . . . . . . . . . . . . . . . . . . 20, 81, 82
Duct Markers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
E
Ear Protection Signs . . . . . . . . . . . . . . . . . . . . . . 25
Electrical Hazard
Signs & Labels. . . . . . . . . . . . . . . . . . 15–18, 30
Electrical Markers. . . . . . . . . . . . . . . . . . . . . . . . 17
Electronic Scoreboards. . . . . . . . . . . . . . . . . . . . 94
Electrostatic Discharge Labels . . . . . . . . . . . 17, 18
Embossing Tape Tool. . . . . . . . . . . . . . . . . . . . . . 52
Emergency Exit Signs & Labels. . . . . 20–22, 31, 32
Emergency Signs & Labels . . . . . . . . . . . . . . 20–22
Enter Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–8
Entry Permits, Confined Space. . . . . . . . . . . . . . . 12
Equipment Signs & Labels. . . . . . . . . . . . 19, 20, 30
Equipment Status Tags. . . . . . . . . . . . . . . . . . . . 37
Equipment Tags. . . . . . . . . . . . . . . . . . . . . . . 38–42
ESD Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Exit Signs. . . . . . . . . . . . . . . . . . . . . . . . 7–9, 31, 32
Expandable Barricades . . . . . . . . . . . . . . . . . . . . 91
Eye Protection Signs. . . . . . . . . . . . . . . . . . . 25, 30
Eye Wash Signs & Labels . . . . . . . . . . . . 22, 30, 33
F
Facility Traffic Signs & Labels. . . . . . . . . . . . 27, 28
Fall Protection Signs. . . . . . . . . . . . . . . . . . . . . . 25
Fence Sign Brackets . . . . . . . . . . . . . . . . . . . . . . 78
Fire:
Exit Signs & Labels. . . . . . . . . . . . . . . . . . 20–22
Extinguisher Signs & Labels. . . . . . 20–22, 30–32
Protection Signs & Labels. . . . . . . . . . . . . 20–22
First Aid Signs & Labels . . . . . . . . . . . . . 22, 32, 33
Fitting Pneumatic Lockout. . . . . . . . . . . . . . . . . . 63
Flag Stickers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Flag Tapes, Pennant . . . . . . . . . . . . . . . . . . . . . . 87
Flag Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Flammable Signs & Labels . . . . . . . . . . . . . . 10, 30
Flash Protection Labels. . . . . . . . . . . . . . . . . . . . 16
Flip Placard Signs, NFPA Diamond. . . . . . . . . . . . 70
Floor Identification Plate & Label
Frame System . . . . . . . . . . . . . . . . . . . . . . . . 84
Floor Marking Tapes . . . . . . . . . . . . . . . . . . . 80–84
Floor Signs, Non-Slip . . . . . . . . . . . . . . . . . 85, 86
Floor Signs. . . . . . . . . . . . . . . . . . 83, 85, 86, 89, 90
Food Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Forklift Tags. . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Forklift Traffic Signs. . . . . . . . . . . . . . . . . . . . 27, 30
Frame System, Floor Label. . . . . . . . . . . . . . . . . . 84
Free Standing Signs. . . . . . . . . . . . . . . . . . . . 89, 90
Fuel Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
G
Gas Cylinder Tags . . . . . . . . . . . . . . . . . . . . . . . . 38
Gas Pipe Markers . . . . . . . . . . . . . . . . . . . . . . . . 58
Gate Valve Lockouts. . . . . . . . . . . . . . . . . . . . . . . 63
GHS:
Pictogram Labels. . . . . . . . . . . . . . . . . . . . . . 72
Posters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Training Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Glow Signs. . . . . . . . . . . . . . . . . . . . . . . . . 9, 31–33
Glow Tapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Graffiti Remover . . . . . . . . . . . . . . . . . . . . . . . . . 78
Grit Tapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Group Lock Boxes . . . . . . . . . . . . . . . . . . . . . . . . 66
H
Handheld Label Printer . . . . . . . . . . . . . . . . . . . . 52
Handicap Parking Signs. . . . . . . . . . . . . . . . . . . . 75
Hanger Boards, Padlock. . . . . . . . . . . . . . . . . . . . 67
Hard Hat Signs & Labels. . . . . . . . . . . . . . . . 25, 26
Hardware, Sign Mounting. . . . . . . . . . . . . . . . . . . 78
Hasps,
Aluminum. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Hazard Communication Signs . . . . . . . . . . . . . . . 10
Hazard Warning Tapes. . . . . . . . . . . . . . . . . . 80–84
Hazard Communication:
Labels, Placards and Signs . . . . . . . . . . . . 70–73
Posters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71, 72
Training Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Hazardous Materials Signs & Labels. . . . . . . . . . 10
Header Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Hearing Protection Signs. . . . . . . . . . . . . . . . 25, 30
Helmet Decals/Stickers. . . . . . . . . . . . . . . . . . . . 26
High Performance Marking Tapes . . . . . . . . . . . . 84
High Voltage Signs & Labels. . . . . . . 15, 16, 18, 30
HMCIS Posters. . . . . . . . . . . . . . . . . . . . . . . . . . . 73
HMCIS Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Holders, Confined Space Permit. . . . . . . . . . . . . . 12
Holders, Tag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Hose Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Housekeeping Signs & Labels. . . . . . . . . . . . 23, 24
Hygiene Signs & Labels. . . . . . . . . . . . . . . . . 23, 24
I
IIAR Ammonia Pipe Markers . . . . . . . . . . . . . . . . 58
Industrial Traffic Signs & Labels . . . . . . . . . . 27, 28
Inspected Labels . . . . . . . . . . . . . . . . . . . . . . . . . 20
Inspection Tags . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Inventory Dots. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ISO Signs & Labels . . . . . . . . . . . . . . . . . . . . . . . 30
J
Jack Module Blockout . . . . . . . . . . . . . . . . . . . . . 65
K
Kits,
GHS Training. . . . . . . . . . . . . . . . . . . . . . . . . . 73
Hazardous Communication Training. . . . . . . . . 73
Lockout/Tagout . . . . . . . . . . . . . . . . . . . . . 68, 69
NFPA Placard. . . . . . . . . . . . . . . . . . . . . . . . . 70
L
Label:
Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Dispensers . . . . . . . . . . . . . . . . . . . . . . . . 20, 49
Floor Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52
Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Labels,
AED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Arc Flash. . . . . . . . . . . . . . . . . . . . . . . . . . 16, 51
Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48–50
Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Character . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chemical. . . . . . . . . . . . . . . . . . . . . . . 10, 54–58
Chemical Hazard. . . . . . . . . . . . . . . . . . . . 70–73
Chemical Safety . . . . . . . . . . . . . . . . . . . . . . . 10
Conductor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Confined Space. . . . . . . . . . . . . . . . . . . . . . . . 11
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . 16–18
Electrostatic Discharge. . . . . . . . . . . . . . . 17, 18
Emergency & Exit . . . . . . . . . . . . . . . . . . . 20–22
Equipment. . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
ESD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Eye Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Fire Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . 20–22
Fire Extinguisher . . . . . . . . . . . . . . . . . . . . 20–22
Fire Protection. . . . . . . . . . . . . . . . . . . . . . 20–22
First Aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Flammable . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Flash Protection . . . . . . . . . . . . . . . . . . . . . . . 16
Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
GHS Pictogram. . . . . . . . . . . . . . . . . . . . . . . . 72
Hard Hat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Hazardous Communication. . . . . . . . . . . . 70–73
Hazardous Materials . . . . . . . . . . . . . . . . . . . . 10
High Voltage. . . . . . . . . . . . . . . . . . . . . . . 16, 18
Housekeeping. . . . . . . . . . . . . . . . . . . . . . 23, 24
Hygiene. . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
Industrial Traffic. . . . . . . . . . . . . . . . . . . . . . . . 28
Inspected . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ISO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Letters and Numbers. . . . . . . . . . . . . . . . . . . . 29
Litter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
95
Lockout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Machine Guarding. . . . . . . . . . . . . . . . . . . 19, 20
Motivational. . . . . . . . . . . . . . . . . . . . . . . . . . 26
NFPA Diamond . . . . . . . . . . . . . . . . . . . . . . . . 70
No Smoking . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Numbers and Letters. . . . . . . . . . . . . . . . . . . . 29
Operation Hazards. . . . . . . . . . . . . . . . . . . 19, 20
Padlock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Personal Protective Equipment . . . . . . . . . . . . 25
Pinch Point . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
Production Control . . . . . . . . . . . . . . . . . . . . . 20
Quality Control . . . . . . . . . . . . . . . . . . . . . . . . 20
Recognition. . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Right-To-Know. . . . . . . . . . . . . . . . . . . . . . 70–73
Roll of. . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52
Shower. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Slips Trips & Falls . . . . . . . . . . . . . . . . . . . 23, 24
Smoking Control. . . . . . . . . . . . . . . . . . . . . . . 27
Thermal Printer . . . . . . . . . . . . . . . . . . . . . 51, 52
Traffic Industrial . . . . . . . . . . . . . . . . . . . . . . . 28
Trash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . 16–18
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48–50
Labels & Signs, Accident
Prevention/Safety . . . . . . . . . . . . . . . . . . . . 3–34
Labels Dispenser. . . . . . . . . . . . . . . . . . . . . . . . . 18
Ladder Tags. . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Laminated Plastic Tags . . . . . . . . . . . . . . . . . . . . 35
Large Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Letters and Numbers. . . . . . . . . . . . . . . . . . . . . . 29
Lift Truck Signs . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Litter Signs & Labels. . . . . . . . . . . . . . . . . . . 23, 24
Lockouts, AC Plug . . . . . . . . . . . . . . . . . . . . . . . . 65
Lockouts, Pneumatic . . . . . . . . . . . . . . . . . . . . . . 63
Lockout Tagout:
Ball Valve Lockouts. . . . . . . . . . . . . . . . . . . . . 63
Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Cable Hasps . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Circuit Breaker Lockouts. . . . . . . . . . . . . . 61, 62
Gate Valve Lockouts . . . . . . . . . . . . . . . . . . . . 63
Hanger Boards . . . . . . . . . . . . . . . . . . . . . . . . 67
Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 69
Plug Lockouts. . . . . . . . . . . . . . . . . . . . . . . . . 65
Pneumatic Lockouts . . . . . . . . . . . . . . . . . . . . 63
Signs & Labels . . . . . . . . . . . . . . . . . . . . . 15, 16
Tool Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Valve Lockouts . . . . . . . . . . . . . . . . . . . . . . . . 63
Lockout Tags . . . . . . . . . . . . . . . . . . . . . . . . . 39, 41
Lockouts,
Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Circuit Breaker . . . . . . . . . . . . . . . . . . . . . 61, 62
Gate Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Wall Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Loop Strap Tags. . . . . . . . . . . . . . . . . . . . . . . . . . 42
Lunchroom Signs. . . . . . . . . . . . . . . . . . . . . . . . . 23
M
Machine, Metal Indenting. . . . . . . . . . . . . . . . . . . 53
Machine Guarding Signs & Labels. . . . . . 19, 20, 30
Machinery Tags. . . . . . . . . . . . . . . . . . . . . . . 36–42
Maintenance Record Tags. . . . . . . . . . . . . . . . . . 37
Marker Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Markers,
Cable . . . . . . . . . . . . . . . . . . . . . . . . . 17, 48–50
Character . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chemical. . . . . . . . . . . . . . . . . . . . . . . . . . 54–58
Conduit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Letters and Numbers. . . . . . . . . . . . . . . . . . . . 29
Numbers and Letters. . . . . . . . . . . . . . . . . . . . 29
Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54–58
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48–50
Marking:
Arrows . . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
Circles. . . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
Corners. . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
Dots . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 81, 82
Shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
Squares. . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
Tapes . . . . . . . . . . . . . . . . . . . . . . . . . 56, 80–84
Triangles. . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
T’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
Material Blanks . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Medical Gas Pipe Markers. . . . . . . . . . . . . . . . . . 58
Message Tapes . . . . . . . . . . . . . . . . . . . . 80, 81, 84
Metal Embossing Tape Tool. . . . . . . . . . . . . . . . . 52
Metal Indenting Machine. . . . . . . . . . . . . . . . . . . 53
Mobile Barriers . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Motivational Labels. . . . . . . . . . . . . . . . . . . . . . . 26
Mounts, Cable Tie. . . . . . . . . . . . . . . . . . . . . . . . . 46
N
Network Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
96
Index | NFPA – 3 ‘n 1 Fold Tags
NFPA:
Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Labels, Placards and Signs . . . . . . . . . . . . . . . 70
Posters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Wallet Guides . . . . . . . . . . . . . . . . . . . . . . . . . 70
No Parking Signs. . . . . . . . . . . . . . . . . . . . . . . . . 75
No Smoking Signs & Labels. . . . . . . . . . . . . . 26, 27
Non-Skid Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Non-Slip Floor Signs . . . . . . . . . . . . . . . . . . . 85, 86
Non-Slip Tapes. . . . . . . . . . . . . . . . . . . . . 81, 83, 84
Numbers and Letters. . . . . . . . . . . . . . . . . . . . . . 29
Nylon Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
O
Operation Hazards Signs & Labels . . . . . . . . 19, 20
Operation Tags. . . . . . . . . . . . . . . . . . . . . . . . 37–42
P
Padlock Hanger Boards. . . . . . . . . . . . . . . . . . . . 67
Padlock Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Parking Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Pavement Signs. . . . . . . . . . . . . . . . . . . . . . . . . . 85
Pedestrian Signs . . . . . . . . . . . . . . . . . . . . . . . . . 78
Pennant Flag Barrier Tapes. . . . . . . . . . . . . . . . . 87
Perimeter Tapes. . . . . . . . . . . . . . . . . . . . . . . . . . 88
Permit Holders & Boards. . . . . . . . . . . . . . . . . . . 12
Permits, Confined Space Entry. . . . . . . . . . . . . . . 12
Personal Protective Equipment (PPE)
Signs & Labels. . . . . . . . . . . . . . . . . . . . . . . . 25
Photoluminescent Signs . . . . . . . . . . . . . . 9, 31–33
Photoluminescent Tapes . . . . . . . . . . . . . . . . . . . 82
Pinch Point Signs & Labels . . . . . . . . . . . . . . 19, 20
Pipe Markers,
Ammonia. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Gas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
IIAR Ammonia. . . . . . . . . . . . . . . . . . . . . . . . . 58
Medical Gas . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Roll Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Roll Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Self Stick. . . . . . . . . . . . . . . . . . . . . . . . . . 54–58
Snap On . . . . . . . . . . . . . . . . . . . . . . . . . . 54–56
Pipe Marking Tapes. . . . . . . . . . . . . . . . . . . . . . . 56
Placards,
Chemical Hazard. . . . . . . . . . . . . . . . . . . . . . . 70
Hazardous Communication. . . . . . . . . . . . . . . 70
NFPA Diamond . . . . . . . . . . . . . . . . . . . . . . . . 70
Right-To-Know. . . . . . . . . . . . . . . . . . . . . . . . . 70
Plant Traffic Signs & Labels. . . . . . . . . . . . . . 27, 28
Plastic:
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Posts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 53
Plates, Stainless Steel . . . . . . . . . . . . . . . . . . . . . 53
Plug Lockouts . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Plugs, Network. . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Pneumatic Lockouts. . . . . . . . . . . . . . . . . . . . . . . 63
Poly Cardstock Tags. . . . . . . . . . . . . . . . . . . . . . . 35
Polyester Laminated Vinyl Signs. . . . . . . . . . . . . . 5
Polyethylene Plastic Signs. . . . . . . . . . . . . . . . . . . 5
Portable Sign Stands. . . . . . . . . . . . . . . . . . . . . . 78
Post Barriers . . . . . . . . . . . . . . . . . . . . . . . . . 91–93
Posters,
Chemical Hazard. . . . . . . . . . . . . . . . . . . . . . . 73
GHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Hazardous Communication. . . . . . . . . . . . . . . 73
HMCIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
NFPA Diamond . . . . . . . . . . . . . . . . . . . . . . . . 73
Right-To-Know. . . . . . . . . . . . . . . . . . . . . . . . . 73
Safety Data Sheets (SDS) . . . . . . . . . . . . . . . . 73
Posts,
Barrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . 91, 93
Belt Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Plastic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Retractable Belt Tape. . . . . . . . . . . . . . . . . . . . 93
Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Stanchion . . . . . . . . . . . . . . . . . . . . . . . . . 91, 92
U-Channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Pressure Sensitive Signs. . . . . . . . . . . . . . . . . . . . 5
Printer, Label . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52
Private Property Signs. . . . . . . . . . . . . . . . . . . . 6–8
Production Control Labels. . . . . . . . . . . . . . . . . . 20
Projecting Signs. . . . . . . . . . . . . . . . . . . . . . . 32, 33
Push Button Covers. . . . . . . . . . . . . . . . . . . . . . . 64
Q
Quality Control Labels . . . . . . . . . . . . . . . . . . . . . 20
R
Ready Mix Truck Signals Wallet Card . . . . . . . . . 13
Recognition Labels . . . . . . . . . . . . . . . . . . . . . . . 26
Record Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Recycling Signs & Labels . . . . . . . . . . . . . . . 24, 33
Reflective:
Characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Letters and Numbers. . . . . . . . . . . . . . . . . . . . 29
Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 88
Restricted Signs. . . . . . . . . . . . . . . . . . . . . . . . 6–8
Restroom Signs. . . . . . . . . . . . . . . . . . . . 24, 30, 33
Retractable Belt Tape Barrier Posts. . . . . . . . . . . 93
Ribbons, Thermal Printer . . . . . . . . . . . . . . . . 51, 52
Right-To-Know Labels, Placards,
Signs, Posters. . . . . . . . . . . . . . . . . . . . . . 70–73
Rigid Plastic Tags . . . . . . . . . . . . . . . . . . . . . . . . 35
Roll Form Pipe Markers. . . . . . . . . . . . . . . . . . . . 57
Roll of Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Roll of Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Roll Tape Pipe Markers. . . . . . . . . . . . . . . . . . . . 57
Roll-Up Signs. . . . . . . . . . . . . . . . . . . . . . . . 76 -77
Rope, Barricade & Barrier. . . . . . . . . . . . . . . . . . . 88
S
Safety Data Sheets Posters. . . . . . . . . . . . . . . . . 73
Safety Glasses Signs. . . . . . . . . . . . . . . . . . . . . . 25
Safety:
Scoreboards. . . . . . . . . . . . . . . . . . . . . . . . . . 94
Signs & Labels . . . . . . . . . . . . . . . . . . . . . . 3–34
Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35–43
Scaffold Tags. . . . . . . . . . . . . . . . . . . . . . 38, 39, 42
Scoreboard Signs, Electronic Safety. . . . . . . . . . . 94
SDS Posters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
SDS Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 33
Security Stop Signs. . . . . . . . . . . . . . . . . . . . . . . 79
Self Stick Pipe Markers. . . . . . . . . . . . . . . . . 54–58
Self-Laminating Tags. . . . . . . . . . . . . . . . . . . 35, 39
Shapes, Marking. . . . . . . . . . . . . . . . . . . . . . . 81, 82
Shower Signs & Labels. . . . . . . . . . . . . . . . . 22, 30
Sign:
Blanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Carriers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Mounting Hardware. . . . . . . . . . . . . . . . . . . . . 78
Posts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Stands. . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78
Signs,
ADA Parking . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Adhesive Vinyl. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Admittance. . . . . . . . . . . . . . . . . . . . . . . . 6, 7, 8
AED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 33
A-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90
Aluminum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ANSI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Asphalt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Authorized. . . . . . . . . . . . . . . . . . . . . . . . 6, 7, 30
Bathroom. . . . . . . . . . . . . . . . . . . . . . . . . 24, 33
Blank Header. . . . . . . . . . . . . . . . . . . . . . . . . . 34
Blinker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Chemical . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chemical Hazard. . . . . . . . . . . . . . . . . . . . . . . 70
Chemical Safety . . . . . . . . . . . . . . . . . . . . . . . 10
Chock Wheels. . . . . . . . . . . . . . . . . . . . . . . . . 27
Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Concrete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Cone Top Warning. . . . . . . . . . . . . . . . . . . . . . 87
Confined Space. . . . . . . . . . . . . . . . . . . . . 11, 30
Construction. . . . . . . . . . . . . . . . . 13, 14, 76, 77
Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Direction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Ear Protection. . . . . . . . . . . . . . . . . . . . . . . . . 25
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . 15, 30
Electronic Scoreboard. . . . . . . . . . . . . . . . . . . 94
Emergency & Exit . . . . . . . . . . . . . 20–22, 31, 32
Enter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7, 8
Equipment. . . . . . . . . . . . . . . . . . . . . . 19, 20, 30
Exit. . . . . . . . . . . . . . . . . . . . . . . . . . 7–9, 31, 32
Eye Protection. . . . . . . . . . . . . . . . . . . . . . 25, 30
Eye Wash . . . . . . . . . . . . . . . . . . . . . . 22, 30, 33
Facility Traffic. . . . . . . . . . . . . . . . . . . . . . . 27, 28
Fall Protection. . . . . . . . . . . . . . . . . . . . . . . . . 25
Fire Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . 20–22
Fire Extinguisher. . . . . . . . . . . . . . 20–22, 30–32
Fire Protection. . . . . . . . . . . . . . . . . . . . . . 20–22
First Aid. . . . . . . . . . . . . . . . . . . . . . . . 22, 32,33
Flammable . . . . . . . . . . . . . . . . . . . . . . . . 10, 30
Flip Placard NFPA Diamond. . . . . . . . . . . . . . . 70
Floor. . . . . . . . . . . . . . . . . . . . 83, 85, 86, 89, 90
Food. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Forklift Traffic. . . . . . . . . . . . . . . . . . . . . . . 27, 30
Free Standing. . . . . . . . . . . . . . . . . . . . . . 89, 90
Glow. . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 31–33
Handicap Parking . . . . . . . . . . . . . . . . . . . . . . 75
Hard Hat Signs . . . . . . . . . . . . . . . . . . . . . . . . 25
Hazardous Communication. . . . . . . . . . . . 10, 70
Hazardous Materials. . . . . . . . . . . . . . . . . . . . 10
Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Hearing Protection . . . . . . . . . . . . . . . . . . 25, 30
High Voltage. . . . . . . . . . . . . . . . . . . . . . . 15, 30
Housekeeping. . . . . . . . . . . . . . . . . . . . . . 23, 24
Hygiene. . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
Industrial Traffic. . . . . . . . . . . . . . . . . . . . . 27, 28
ISO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Lift Truck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Litter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
Lockout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Lunchroom. . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Machine Guarding. . . . . . . . . . . . . . . . 19, 20, 30
NFPA Diamond . . . . . . . . . . . . . . . . . . . . . . . . 70
NFPA Diamond Flip Placard. . . . . . . . . . . . . . . 70
No Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
No Smoking . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Non-Slip Floor. . . . . . . . . . . . . . . . . . . . . . 85, 86
Operation Hazards. . . . . . . . . . . . . . . . . . . 19, 20
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Pavement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Pedestrian. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Personal Protective Equipment . . . . . . . . . . . . 25
Photoluminescent. . . . . . . . . . . . . . . . . 9, 31–33
Pinch Point . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
Plant Traffic. . . . . . . . . . . . . . . . . . . . . . . . 27, 28
Plastic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Polyester Laminated Vinyl . . . . . . . . . . . . . . . . . 5
Polyethylene Plastic. . . . . . . . . . . . . . . . . . . . . . 5
Pressure Sensitive. . . . . . . . . . . . . . . . . . . . . . . 5
Private Property. . . . . . . . . . . . . . . . . . . . . . 6–8
Projecting. . . . . . . . . . . . . . . . . . . . . . . . . 32, 33
Recycling . . . . . . . . . . . . . . . . . . . . . . . . . 24, 33
Reflective . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Restricted. . . . . . . . . . . . . . . . . . . . . . . . . . . 6–8
Restroom . . . . . . . . . . . . . . . . . . . . . . 24, 30, 33
Right-To-Know. . . . . . . . . . . . . . . . . . . . . . . . . 70
Roll of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Roll-Signs. . . . . . . . . . . . . . . . . . . . . . . . 76 -77
Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . 25
SDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 33
Security Stop . . . . . . . . . . . . . . . . . . . . . . . . . 79
Shower. . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 30
Slips Trips & Falls . . . . . . . . . . . . . . . . . . . 23, 24
Smoking Control. . . . . . . . . . . . . . . . . 26, 30, 33
Speed Bump. . . . . . . . . . . . . . . . . . . . . . . . . . 79
Standing. . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90
Stop . . . . . . . . . . . . . . . . . . . . . . . . . . 74, 78, 79
Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–79
Traffic Industrial . . . . . . . . . . . . . . . . . . . . 27, 28
Trash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
Trespassing. . . . . . . . . . . . . . . . . . . . . . . . . . 6–8
Vinyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Washroom . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Wheel Chock. . . . . . . . . . . . . . . . . . . . . . . . . . 27
Yield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74, 79
Signs & Labels, Accident
Prevention & Safety. . . . . . . . . . . . . . . . . . . 3–34
Slips, Trips & Falls Signs. . . . . . . . . . . . . . . . 23, 24
Smoking Control Signs & Labels. . . . 26, 27, 30, 33
Snap On Pipe Markers. . . . . . . . . . . . . . . . . . 54–56
Soft Aluminum Tags. . . . . . . . . . . . . . . . . . . . . . . 53
Software, Label . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Speed Bump Signs. . . . . . . . . . . . . . . . . . . . . . . . 79
Squares, Marking. . . . . . . . . . . . . . . . . . . . . . 81, 82
Stainless Steel:
Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Strapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Stanchion Posts. . . . . . . . . . . . . . . . . . . . . . . . . . 91
Standing Signs. . . . . . . . . . . . . . . . . . . . . . . . 89, 90
Stands, Roll-Up Sign . . . . . . . . . . . . . . . . . . . . . . 76
Stands, Sign. . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78
Status Record Tags . . . . . . . . . . . . . . . . . . . . 37, 38
Steel Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Steering Wheel Covers . . . . . . . . . . . . . . . . . . . . 68
Stencils, Confined Space. . . . . . . . . . . . . . . . . . . 12
Stickers, Flag. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Stickers, Helmet. . . . . . . . . . . . . . . . . . . . . . . . . . 26
Stop Signs. . . . . . . . . . . . . . . . . . . . . . . . 74, 78, 79
Strapping, Steel & Stainless Steel. . . . . . . . . . . . . 47
Striping Tapes . . . . . . . . . . . . . . . . . . . . . . . . 80–84
T
Tag Hasps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Tag Holder Systems. . . . . . . . . . . . . . . . . . . . . . . 40
Tags,
3 ‘n 1 Fold. . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Aluminum. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Aluminum Hasps. . . . . . . . . . . . . . . . . . . . . . . 60
Barricade . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Blank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cardstock. . . . . . . . . . . . . . . . . . . . . . . . . 35, 43
Chemical Hazard. . . . . . . . . . . . . . . . . . . . 71, 72
Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Equipment. . . . . . . . . . . . . . . . . . . . . . . . . 41–42
Equipment Status . . . . . . . . . . . . . . . . . . . . . . 37
Forklift. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Gas Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . . 38
GHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Hazardous Communication. . . . . . . . . . . . 71, 72
HMCIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Ladder. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Laminate Plastic . . . . . . . . . . . . . . . . . . . . . . . 35
Lockout. . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 41
Loop Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Machinery. . . . . . . . . . . . . . . . . . . . . . . . . 39–42
Maintenance Record. . . . . . . . . . . . . . . . . . . . 37
NFPA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 40–42
Plastic. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 53
Poly Cardstock . . . . . . . . . . . . . . . . . . . . . . . . 35
Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Rigid Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Roll of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35–43
Scaffold . . . . . . . . . . . . . . . . . . . . . . . 38, 39, 42
Self-Laminating. . . . . . . . . . . . . . . . . . . . . 35, 39
Soft Aluminum . . . . . . . . . . . . . . . . . . . . . . . . 53
Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . 53
Status Record. . . . . . . . . . . . . . . . . . . . . . 37, 38
Valve Identifier. . . . . . . . . . . . . . . . . . . . . . . . . 53
Tapes,
Aisle Marking . . . . . . . . . . . . . . . . . . . . . . 80–84
Aluminum. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Anti-Skid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Arrow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Barricade . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Barrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Directional Flow Arrow. . . . . . . . . . . . . . . . . . . 56
Floor Marking . . . . . . . . . . . . . . . . . . . . . . 80–84
Glow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Grit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Hazard Warning. . . . . . . . . . . . . . . . . . . . . 80–84
High Performance Marking . . . . . . . . . . . . . . . 84
Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52
Marking. . . . . . . . . . . . . . . . . . . . . . . . 56, 80–84
Message. . . . . . . . . . . . . . . . . . . . . . . 80, 81, 84
Non-Skid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Non-Slip . . . . . . . . . . . . . . . . . . . . . . . 81, 83, 84
Pennant Flag. . . . . . . . . . . . . . . . . . . . . . . . . . 87
Perimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Photoluminescent. . . . . . . . . . . . . . . . . . . . . . 82
Pipe Marking. . . . . . . . . . . . . . . . . . . . . . . . . . 56
Reflective . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . 52
Striping. . . . . . . . . . . . . . . . . . . . . . . . . . . 80–84
Thermal Printer . . . . . . . . . . . . . . . . . . . . . 51, 52
Tie Wraps . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Ties,
Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Flag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Marker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Zip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Toggle Switch Covers. . . . . . . . . . . . . . . . . . . . . . 64
Tool Bag, Lockout Tagout . . . . . . . . . . . . . . . . . . . 68
Tools,
Cable Tie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Metal Embossing Tape. . . . . . . . . . . . . . . . . . . 52
Metal Indenting. . . . . . . . . . . . . . . . . . . . . . . . 53
Traffic Cones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Traffic Industrial Signs & Labels. . . . . . . . . . 27, 28
Traffic Signs . . . . . . . . . . . . . . . . . . . . . . . . . 74–79
Trash Signs & Labels. . . . . . . . . . . . . . . . . . . 23, 24
Trespassing Signs . . . . . . . . . . . . . . . . . . . . . . . 6–8
Triangles, Marking . . . . . . . . . . . . . . . . . . . . . 81, 82
Truck Signals Wallet Card. . . . . . . . . . . . . . . . . . 13
T’s, Marking. . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82
U
U-Channel Posts . . . . . . . . . . . . . . . . . . . . . . . . . 78
V
Valve Identifier Tags . . . . . . . . . . . . . . . . . . . . . . 53
Valve Lockouts. . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Vinyl Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Voltage Labels & Markers. . . . . . . . . . . . . . . 17, 18
W
Wall Plug Lockouts . . . . . . . . . . . . . . . . . . . . . . . 65
Wall Switch Covers . . . . . . . . . . . . . . . . . . . . . . . 64
Wallet Cards,
Ready Mix Truck Signals . . . . . . . . . . . . . . . . . 13
Truck Signals. . . . . . . . . . . . . . . . . . . . . . . . . . 13
Crane Signal. . . . . . . . . . . . . . . . . . . . . . . . . . 13
NFPA Diamond . . . . . . . . . . . . . . . . . . . . . . . . 70
Warning Signs, Cone Top . . . . . . . . . . . . . . . . . . 87
Washroom Signs . . . . . . . . . . . . . . . . . . . . . . . . . 24
Wheel Chock Signs . . . . . . . . . . . . . . . . . . . . . . . 27
Wire:
Clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48–50
Markers. . . . . . . . . . . . . . . . . . . . . . . . . . . 48–50
Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
Y
Yield Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . 74, 79
Z
Zip Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 45
NUMERIC
3 ‘n 1 Fold Tags. . . . . . . . . . . . . . . . . . . . . . . . . . 42
One-piece construction for consistent performance and reliability.
Application Focused Bundling
Improve productivity and worker safety with
the wide range of sizes, styles and materials for
fastening, bundling and clamping.
Increased Reliability in Harsh
Environments:
When strength, vibration, radiation, weathering,
corrosion and temperature extremes are a factor,
the Pan-Steel System provides strong, reliable
solutions for use in indoor, outdoor and direct
burial applications.
Visit www.panduit.com for
additional information
Panduit Corp.
World Headquarters
Tinley Park, IL 60487
USA
800.777.3300
Visit www.panduit.com
for terms and conditions
© 2016 Panduit Corp.
ALL RIGHTS RESERVED.
SFCB07--SA-ENG
Printed in the U.S.A.
5/2016