GKT-VT Aluminum Electrolytic Capacitor–SMD FEATURES u Chip type, operating with wide temperature range -40~+105℃. u Load Life of 1,000~2,000 hours u Emboss carrier tape packing system is available for automatic insertion. u Designed for surface mounting on high density circuit board. SPECIFICATIONS OPERATING TEMPERATURE -40℃ ~ +105℃ Voltage Range 4V ~ 100V.DC Capacitance Range 0.1 ~ 10000μF Capacitance Tolerance ±20% at 120Hz, 20℃ Leakage Current Dissipation Factor (Tan δ) Stability At Low Temp. Load Life Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater. (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater. (After 1 minutes application of rated voltage) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) 4 6.3 10 16 Φ4~Φ10 0.35 0.30 0.24 0.20 Tan δ (Max.) Φ12.5~Φ16 0.42 0.38 0.34 0.30 Measurement Frequency: 120Hz Rated Voltage (V) 4 6.3 Z(-25℃)/ Z(20℃) 7 4 Impedance Φ4~Φ10 Z(-40℃)/ Z(20℃) 15 8 Ratio ZT/Z20 Z(-25℃)/ Z(20℃) 7 5 Φ12.5~Φ16 (Max.) Z(-40℃)/ Z(20℃) 17 12 25 35 50 63 100 0.16 0.26 0.14 0.22 0.14 0.18 0.12 0.14 0.12 0.12 10 3 16 2 25 2 35 2 50~63 2 100 3 6 4 4 3 3 4 4 3 2 2 2 2 5 4 3 3 10 8 After 2000 hours (1000hrs. forΦ4~Φ6.3x5.8) application of rated voltage at 105℃, They meet the characteristics listed below. within ± 20% of initial value for capacitors of 10V or more Capacitance Change (within ± 30% of initial value for capacitors of 4V & 6.3V) Dissipation Factor 200% or less of initial specified value Leakage Current Initial specified value or less Shelf Life After leaving capacitors under no load at 105℃ for 1000 hours, They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed below. Capacitance Change Within ± 10% of initial value Dissipation Factor Initial specified value or less Leakage Current Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] *2 Applicable toΦ8x10.5~Φ10 ΦDxL 4x5.4 5x5.4 6.3x5.4 6.3x7.7 A 1.8 2.1 2.4 2.4 B 4.3 5.3 6.6 6.6 C 4.3 5.3 6.6 6.6 E±0.2 1.0 1.3 2.2 2.2 L 5.4 5.4 5.4 7.7 *3 Applicable toΦ12.5~Φ16 8x6.2 8x10.5 10x10.5 3.3 2.9 3.2 8.3 8.3 10.3 8.3 8.3 10.3 2.2 3.1 4.4 6.2 10.5 10.5 10x13.5 3.2 10.3 10.3 4.4 13.5 12.5x13.5 4.7 13.0 13.0 4.4 13.5 12.5x16 4.7 13.0 13.0 4.4 16.0 16x16.5 5.5 17.0 17.0 6.7 16.5 (mm) 16x21.5 5.5 17.0 17.0 6.7 21.5 1 Tel: (852) 8106 7033 GKT-VT Website: www.kingtronics.com Email: [email protected] Fax: (852) 8106 7099 Aluminum Electrolytic Capacitor–SMD FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency Φ4~Φ10 50Hz 120Hz 300Hz 1KHz 10KHz~ 0.1~68µF 0.70 1.00 1.17 1.36 1.50 100~3300µF 0.85 1.00 1.08 1.20 1.30 ~68µF 0.75 1.00 1.35 1.57 2.00 100~680µF 0.8 1.00 1.23 1.34 1.50 1000~10000µF 0.85 1.00 1.10 1.13 1.15 Coefficient Φ12.5~Φ16 STANDARD RATINGS WV/V Cap/μF 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 0R1 R22 R33 R47 010 2R2 3R3 -------- -------- -------- -------- -------- -------- -------- -------- 4R7 -- -- -- -- -- -- -- -- -- -- -- -- 18 5×5.4 (4×5.4) 20 (14) 5×5.4 (4×5.4) 21 (14) 6.3×5.4 24 6.3×5.4 38 6.3×7.7 (6.3×5.4) (8 x 6.2) 51 (42) (70) 6.3×5.4 (8 x 6.2) 6.3×7.7 (6.3×5.8) 8×10.5 (6.3×7.7) 42 (84) 70 (50) 120 (84) 6.3×7.7 60 8×10.5 (6.3×7.7) 10×10.5 (8×10.5) 120 (63) 170 (140) 100 22 220 33 330 47 470 100 101 150 4 0G 151 -- -- -- -- -- -- 4×5.4 -------- -------- -- -- 4×5.4 22 5×5.4 (4×5.4) 25 (20) 5×5.4 (4×5.4) 27 (20) 6.3×5.4 (5×5.4) 36 (25) 5×5.4 (4×5.4) 5×5.4 (4×5.4) 6.3×5.4 (5×5.4) 30 (18) 36 (24) 60 (43) 5×5.4 (4×5.4) 5×5.4 (4×5.4) 6.3×5.4 (5×5.4) 27 (22) 33 (25) 50 (39) 5×5.4 (4×5.4) 6.3×5.4 (5×5.4) 6.3×5.4 (8×6.2) 30 (22) 41 (30) 53 (110) 6.3×5.4 (5×5.4) 6.3×5.4 (5×5.4) 6.3×5.4 (8 x 6.2) 40 (28) 48 (31) 60 (120) 6.3×5.4 (5×5.4) 6.3×5.4 (8 x 6.2) 44 (29) 48 (91) 6.3×5.4 52 6.3×5.4 -------- -------- 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 5×5.4 (4×5.4) 0.7 1.6 2.5 3.5 7 11 13 16 (13) 6.3×7.7 91 140 (100) 8×10.5 155 10×10.5 170 55 6.3×5.4 62 6.3×7.7 95 8×10.5 (6.3×7.7) 67 105 (105) 8×10.5 (6.3×7.7) (8 x 6.2) 150 (105) (85) 8×10.5 175 10×10.5 (8×10.5) 220 (190) 10 x 13.5 (10×10.5) 280 (220) 10×10.5 245 16x16.5 (12.5x13.5) (10x13.5) 600 (420) (295) 12.5x13.5 (10x13.5) (10×10.5) 12.5x13.5 (10x13.5) 520 (375) (280) 530 (395) 16x16.5 (12.5x16) 700 (520) 16x16.5 750 220 221 6.3×5.4 57 6.3×7.7 (6.3×5.8) 105 (67) 6.3x5.8 6.3×7.7 (8×6.2) 330 331 6.3×7.7 100 6.3×7.7 105 8×10.5 196 8×10.5 195 10×10.5 (8×10.5) 240 (220) 470 471 6.3×7.7 105 8×10.5 (6.3×7.7) 210 (120) 10×10.5 (8×10.5) 260 (210) 10×10.5 (8×10.5) 295 (230) 10×10.5 280 680 681 8×10.5 210 8×10.5 210 10×10.5 270 10×10.5 315 10 x 13.5 400 10×10.5 315 12.5x13.5 (10x13.5) (10×10.5) 500 (390) (340) 12.5x13.5 580 16x16.5 (12.5x16) 750 (600) 16x21.5 1000 10×13.5 460 12.5x13.5 550 12.5x16 850 -- -- -- -- 16x16.5 (12.5x16) 16x16.5 16x21.5 950 (750) 1000 1200 16x16.5 16x21.5 1050 1250 16x21.5 1300 -- -- 16x21.5 1400 -- -- -- -- 1350 -- -- -- -- -- -- 1000 102 8×10.5 230 1500 152 10×10.5 315 2200 222 10 x 13.5 (10×10.5) 440 (340) 3300 332 10 x 13.5 490 4700 472 12.5x13.5 600 6800 682 10000 103 16x16.5 (12.5x16) 16x21.5 950 (650) 250 10×10.5 (8×10.5) 300 (230) 10 x 13.5 (10×10.5) 12.5x13.5 (10x13.5) 12.5x16 (12.5x13.5) 16x16.5 16x21.5 450 (315) 620 (500) 700 (660) 1000 1200 16x21.5 -- 12.5x13.5 680 16x16.5 1000 16x21.5 1300 16x21.5 1250 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2 GKT-VT TKT Aluminum Electrolytic Capacitor–SMD Tantalum Capacitor–Dipped STANDARD RATINGS 63 1J WV/V Cap/μF 0.1 0R1 100 2A 4×5.4 0.7 -- 63 1J WV/V Cap/μF 33 -- 100 2A 330 8×10.5 112 10×10.5 (8×10.5) 160 (119) 0.22 R22 4×5.4 1.6 -- -- 47 470 0.33 R33 4×5.4 2.5 -- -- 68 680 -- -- 12.5x13.5 (10.5x13.5) (10×10.5) 10 x 13.5 16x16.5 (12.5x13.5) (10x13.5) 270 (210) (196) 225 560 (470) (235) 0.47 R47 4×5.4 3.5 -- -- 100 101 1 010 4×5.4 7 4×5.4 7 150 151 2.2 2R2 4×5.4 11 6.3×5.4 14 220 221 3.3 3R3 5×5.4 13 331 16x16.5 (12.5x16) 700 (510) 4R7 5×5.4 16 32 (20) (30) 35 (21) 330 4.7 6.3×7.7 (6.3×5.4) (8×6.2) 6.3×7.7 (6.3×5.4) 470 471 16x16.5 16x21.5 750 900 10 100 77 (35) 680 681 16x21.5 950 220 39 (24) (25) 98 (49) 8×10.5 (6.3×7.7) 22 6.3×7.7 (6.3×5.4) (8 x 6.2) 8×10.5 (6.3×7.7) 10×10.5 (8×10.5) 126 (84) 10×10.5 12.5×13.5 (10×13.5) (10×10.5) 12.5×13.5 (10×13.5) 133 250 (160) (140) 300 (180) 16x16.5 (12.5x13.5) 450 (380) 16x16.5 16x21.5 550 750 16x21.6 800 Case size Allowable ripple HOW TO ORDER GKT | VT | 0J | M | 220 | 040054 | T | R | Series Sub Series Voltage Capacitance Tolerance 2. Capacitance Case Size Packing Pb 3. 4. 5. 6. 1. NOTE: 1. Rated Voltage Code 0G Voltage 4 0J 1A 1C 1E 1V 1H 1J 2A 6.3 10 16 25 35 50 63 100 2. Capacitance Tolerance Code K M Q T ±20% +30-10% +50-10% Tolerance ±10% 3. Capacitance Code 0R1 R47 010 4R7 100 470 101 471 102 472 103 0.1 0.47 1 4.7 10 47 100 470 1000 4700 10000 Capacitance (µF) 4. Case Size Code Case Size (mm) 5. Packing Code Packing 6. Pb Code Pb 040054 050054 063054 080105 100105 125135 160215 4x5.4 5x5.4 6.3x5.4 8x10.5 10x10.5 12.5x13.5 16x21.5 T Tape & Reel R RoHS Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 3