MB1S THRU MB10S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS REVERSE VOLTAGE: 100 to 1000 Volts FORWARD CURRENT: 0.8 Ampere MBS FEATURES Rating to 1000V PRV Ideal for printed circuit board Reliable low cost construction utilizing Molded plastic technique results in inexpensive product Lead tin plated copper MECHANICAL DATA Polarity: Symbol molded on body Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% Dimensions in inches and (millimeters) SYMBOLS MB1S MB2S MB4S MB6S MB8S MB10S UNITS Maximum Repetitive Peak Reverse Voltage VRRM 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 70 140 280 420 560 700 V VDC 100 200 400 600 800 1000 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA=40 ℃ (Note 1) I(AV) 0.8 A IFSM 30 A VF 1.1 V Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 0.8A DC Maximum DC Reverse Current 5.0 @TJ=25℃ IR at Rated DC Blocking Voltage Typical Junction Capacitance Per Element Typical Thermal Resistance (Note2) (Note3) Operating Temperature Range NOTES: 1.Mounted on P.C. board. 15 RθJL 75 TJ -55 to +150 ℃ -55 to +150 ℃ 2. Measured at1.0MHz and applied reverse voltage of 4.0V DC. Website: www.kingtronics.com ℃/W CJ TSTG Storage Temperature Range μA 500 @TJ=125℃ Email: [email protected] 3. Thermal resistance junction to case Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 MB1S THRU MB10S RATING AND CHRACTERISTIC CURVES Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2