ANFCA-1510-A02

NFC Ferrite Antenna (13.56MHz)
ANFCA-1510-A02
Pb
RoHS/RoHS II compliant
Moisture Sensitivity Level (MSL) – MSL 1
FEATURES:
• Ultra thin flexible antenna structure ( 220+/-46 μm)
• Peel and Stick antenna designs
• Ferrite sheet backing optimizes magnetic fields
• Wide operating temperature range -40ºC to +85ºC
• Matched to leading NFC controller IC’s
• Customized solutions available
15 x 10 mm
APPLICATIONS:
• Mobiles
• NFC Payment readers
• Electronic wallets
• Health care ID scanners
• NFC data loggers transport
• Ticketing systems
• Museum information systems
• Electronic Parking Payments
• Industrial data collection.
STANDARD SPECIFICATIONS:
Maximum Ratings
Item
Operating Temperature Range
Storage Temperature Range
Value
-40ºC to + 85ºC
-40ºC to + 85ºC
Electrical Characteristics
Item
Spec
Operating Frequency (MHz)
13.56
Inductance (μH)
1.8±10%
RAC (Ω)
4.0±20%
Test Condition
1 MHz/500mV
Test equipment: TH2828S.
Connection to the PCB
While soldering thin wires to the pads on the antenna is possible, great care must be taken, (see manual soldering
Section 10.1). However it is recommended to make contact to the antenna pads via Pogo Pins. These are soldered onto
the product PCB, and interface mechanically via a pressure contact to the pads on the NFC antenna. Volume applications using the NFC antenna should always use Pogo Pins to make the connections.
Product Customization
Products can be customized according to customer requirements. Features such as the dimensions or shape of
the coil or its inductance can be customized. Please contact ABRACON or authorized distributor / agent for
further details.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised:10.04.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
NFC Ferrite Antenna (13.56MHz)
ANFCA-1510-A02
Pb
RoHS/RoHS II compliant
15 x 10 mm
Moisture Sensitivity Level (MSL) – MSL 1
OUTLINE DIMENSIONS:
View from rear ferrite side, pads upward
(Dimensions in mm)
CONSTRUCTION:
No
Material Name
Thickness ( μm)
Thickness (in)
1
PET Tape
10+/-3
0.000393±0.000118
2
Ferrite Sheet
100+/-5
0.00393±0.000196
3
Adhesive Tape
10+/-3
0.000393±0.000118
4
FCP
70+/-30
0.00275±0.000118
5
Adhesive Tape
30+/-5
0.00118±0.000196
6
Release Paper
/
/
220+/-46
0.00866±0.00181
Total Thickness
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised:10.04.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
NFC Ferrite Antenna (13.56MHz)
ANFCA-1510-A02
Pb
RoHS/RoHS II compliant
15 x 10 mm
MATCHING CIRCUIT AND REFERENCE VALUES
Component
L0
Value for reference
only (1)
560 / 330nH
(NXP / Broadcom)
C0
180pF
C1
33pF
C2 (Includes C2a and
C2b values)
82pF
Rq
0 Ohm
Notes
EMC filter resonance at 15.4MHz ( NXP) and 20.6MHz
(Broadcom).
EMC filter resonance at 15.4MHz (NXP) and 20.6MHz
(Broadcom).
Antenna matching component, to achieve series resonance at
13.56MHz. (Note: Antenna matching component value may
need optimization depending upon antenna environment)
Antenna matching component, to achieve parallel resonance
at 15MHz. (Note: Antenna matching component value may
need optimization depending upon antenna environment).
Damping resistor, the Rq resistor used to lower Q-value if
above 35 Ohm, if needed.
Note (1) Values can change depending upon drive circuits, design of the antenna and environment.
Reflow Profile: Not recommended for reflow soldering
Manual Soldering: Recommended Soldering iron temperature setting: 330°C, 3 seconds max, 3 times max.
Packaging: 100pcs per polyphene bag / box
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised:10.04.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Similar pages