AMCA52-2R510G-S1F-T

Surface Mount WLAN Antenna (2510MHz)
AMCA52-2R510G-S1F-T
Pb
RoHS / RoHS II Compliant
Moisture Sensitivity Level (MSL) – MSL = 1
FEATURES:
• 2510MHz, Bandwidth ≥200MHz
• Suitable for RoHS compliant reflow
• Gain 2.5dBi (Peak) / 0.5dBi (Average)
• VSWR <2:1
• Small size – 5.2 x 2.1 x 1.0mm (0.204 x 0.082 x 0.039inch)
• Non Ground Mounting type.
• Power Handling 3W Max
• Matched to 50 Ohm.
5.2 x 2.1 x 1.0mm
APPLICATIONS:
• Wireless application - WiMax bands.
• User Equipments (UE), e.g. dongles, modems
• User Equipments applications covering 2600MHz WiMax bands.
• Alternative to larger PCB solution
STANDARD SPECIFICATIONS
Maximum Ratings
Item
Operating Temperature Range
Storage Temperature Range
Value
-40ºC to + 85ºC
-10ºC ~ +40 and RH ºC 70% (Max.)
Electrical Characteristics
Item
Spec
Frequency
2510MHz
Bandwidth
≥200 MHz
Peak Gain
2.5 dBi typ.
Average Gain
0.5 dBi typ
VSWR
<2:1
Impedance
50 Ohm
Power Capability
3W max
PART IDENTIFICATION:
AMCA52-2R350G-S1F-T
Packaging
Blank: Bulk or Cut Tape
T: T/R 1000pcs per reel
T4 : T/R 4000pcs per reel
ABRACON IS
ISO9001:2008
CE
CERTIFIED
RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.28.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Surface Mount WLAN Antenna (2510MHz)
AMCA52-2R510G-S1F-T
Pb
RoHS / RoHS II Compliant
5.2 x 2.1 x 1.0mm
OUTLINE DIMENSIONS:
Recommended Land Pattern
Series
A
AMCA52 5.2±0.2
B
2.1±0.2
C
1.0±0.2
D
0.5±0.2
E
2.0±0.2
F
1.5±0.2
G
1.0±0.2
H
4.0±0.2
I
1.4±0.2
(Dimensions: mm)
REFLOW PROFILE:
•
•
•
•
•
•
Preheat condition: 150 ~200 /60~120ºC sec.
Allowed time above 217ºC: 60~90sec.
Max temp: 260ºC
Max time at max temp: 10sec.
Solder paste: Sn/3.0Ag/0.5Cu
Allowed Reflow time: 2x max
[Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly
profiles. Actual board assembly profiles must be based on the customer's specific board design, solder paste and
process, and should not exceed the parameters as the Reflow profile shows.]
MANUAL SOLDERING
Pre-heating Temperature: 120ºC, 60ºC ~ 300 sec.
•
•
•
•
•
•
•
Iron soldering power: Max.30W.
Pre-heating: 150 / 60 sec. ºC.
Soldering Tip temperature: 350 Max. ºC.
Soldering time: 3 sec Max.
Solder paste: Sn/3.0Ag/0.5Cu.
Max 1 times for iron soldering.
Soldering Temperature: 340ºC±5ºC, 5sec max per each terminal.
[Note: Take care not to apply the tip of the soldering iron to the terminal electrodes.]
ABRACON IS
ISO9001:2008
CE
CERTIFIED
RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.28.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Surface Mount WLAN Antenna (2510MHz)
AMCA52-2R510G-S1F-T
Pb
RoHS / RoHS II Compliant
5.2 x 2.1 x 1.0mm
TAPE & REEL:
Packaging: 1000 or 4000 Units per reel, please specify when ordering. 1000pcs MOQ.
Reel Dimensions
W
12.0±0.10
D0
P1
E
F
B0
8.0±0.10
1.75±0.10
5.50±0.15
5.50±0.10
P0
K0
A0
t
1.50 +0.10 / 0.0
4.0±0.10
1.20±0.10
2.35±0.10
0.3±0.05
Dimensions (mm)
Type
Spec
AMCA52
13"*12mm
A
W
C
B
330±1
12.5±0.2
100±0.5
2.3±0.2
Mounting Direction of Tape on Reel
Note: The sprocket holes are to the right as the tape is pulled toward the user.
(Dimensions: mm)
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE
CERTIFIED
RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.28.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com