Product datasheet HBO 1002 W/CEL Microlithography lamps for Canon i-line systems __ May 25, 2016, 17:16:10 HBO 1002 W/CEL © 2016, OSRAM GmbH. All rights reserved. Page 1 of 3 Product datasheet Technical data Electrical data Nominal wattage 1002.00 W Nominal current 16.0 A Nominal voltage 47.0 V Rated wattage 750.00 W Dimensions & weight __ Diameter 28.0 mm Length 175.0 mm Mounting length 157.0 mm Lifespan Lifespan 2500 h Additional product data Base (standard designation) SFXc15-6/20 Product remark Also available with 1,500 h lifespan: HBO 1002 W/CL (4050300324005)/Obtainable in Europe, Singapore and Japan only through Canon/Lamp suitable for pulsed operation between 700…1000 W/Maximum permissible power 750 W for constant power operation Capabilities Burning position Vertical 1) 1) Anode underneath May 25, 2016, 17:16:10 HBO 1002 W/CEL © 2016, OSRAM GmbH. All rights reserved. Page 2 of 3 Product datasheet Safety advice Because of their high luminance, UV radiation and high internal pressure (when hot) HBO lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Mercury is released if the lamp breaks. Special safety precautions must be taken. More information is available on request or can be found in the leaflet included with the lamp or in the operating instructions. Logistical Data Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4050300412634 HBO 1002 W/CEL Shipping carton box 1 330 mm x 110 mm x 115 mm 4.17 dm³ 456.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. __ May 25, 2016, 17:16:10 HBO 1002 W/CEL © 2016, OSRAM GmbH. All rights reserved. Page 3 of 3