APAES923R4560C16-T Datasheet

RFID Patch Antenna
APAES923R4560C16-T
RoHS/RoHS II compliant
MSL level: Not Applicable
FEATURES:
• High Gain
• Pin type
• Customization Available
• RoHS Compliance
45.0 x 45.0 x 6.0mm
TYPICAL APPLICATIONS:
RFID systems for Logistic & Inventory Management
of Retail, Pharmaceutical, Automotive Industries;
Industrial automation, Contactless smart cards.
STANDARD SPECIFICATIONS:
Parameters
Receiving Frequency Range
Center Frequency(*)
Min.
915
Typ.
923
Max.
Units
Note
930
MHz
MHz
MHz
(On 50*50mm GND Plane)
7
Bandwidth
Gain
Axial Ratio
VSWR @ Center Frequency
2.5
Polarization Model
Impedance
Frequency Temperature Coefficient
RHCP
50
dBic
2.5
dB
1.5
-10
10
(Return loss ≤-10dB)
(Peak gain on (On 70*70mm
GND Plane facing Zenith.)
(Right Hand Circular
Polarization)
Ω
ppm/°C
(*)
Application environment, including size of the ground plane, proximity to adjacent components, etc., will affect stated
performance. Fine tuning might be required when installed on end-customer’s PCB. Abracon offers Antenna
Optimization Service, please contact Abracon.
TEST CONDITIONS & TEST SETUP:
STRUCTURE AND MATERIAL
Description
Antenna Substrate
Pin
Electrode
Ground Plane
Adhesive Type
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Material
Dielectric Ceramics
Copper and tinplated
Ag Plated
Ag Plated
3M
Visit www.abracon.com forTerms & Conditions of Sale Revised
06.20.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
RFID Patch Antenna
APAES923R4560C16-T
SMITH CHART
RoHS/RoHS II compliant
45.0 x 45.0 x 6.0mm
RADIATION PATTERN
OUTLINE DIMENSION:
Other Tolerance: ±0.3mm
Unit: mm
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised
06.20.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
RFID Patch Antenna
APAES923R4560C16-T
RoHS/RoHS II compliant
45.0 x 45.0 x 6.0mm
PACKAGING:
Package Type
Tray
Inner Box
Outer Box
Quantity
15 pcs/tray
150 pcs/box
300 pcs/box
120
Inner Box
0
20
335
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
NOTE:
1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information.
2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement.
3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification.
4) When changing your production process, please notify ABRACON immediately.
5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. ABRACON’s products are not
specifically designed for Military, Aviation, Aerospace, Life-dependant Medical
applications or any application requiring high reliability where component failure could result in loss of life and/or property.
For applications
requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is
required. Please contact ABRACON Corporation for more information.
6) All specifications and Marking will be subject to change without notice.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised
06.20.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Similar pages