APAE1621R2540ABDD1-T

Iridium Patch Antenna
APAE1621R2540ABDD1-T
RoHS/ RoHS II compliant
25.0 x 25.0 x 4.0mm
MSL level: Not Applicable
FEATURES:
• High Gain
• Compact Size and Low profile
• Pin with Tape Mount
• Customization Available
• RoHS Compliance
TYPICAL APPLICATIONS:
• Global Mobile Satellite Voice and Data
• Iridium Global Calls
STANDARD SPECIFICATIONS:
Parameters
Center Frequency
-10dB Bandwidth
Min.
Typ. Max.
1621±3.0
9
Impedance
Polarization Model
Frequency Temperature Coefficient
Note
(Without adhesive tape on 27x27mm ground plane)
MHz
VSWR
Gain
Units
MHz
1.5
(@ Center Frequency)
4
dBic
50
RHCP
(@ Zenith, typical on 70*70mm ground plane)
Ω
(Right Hand Circular Polarization)
20
ppm/°C
Test Conditions and Test Setup:
Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.)
TEST JIG:
SMA
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.10.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Iridium Patch Antenna
APAE1621R2540ABDD1-T
RoHS/ RoHS II compliant
25.0 x 25.0 x 4.0mm
IMPEDANCE CHARACTERISTICS
Tested on 27x27mm GND Plane
OUTLINE DRAWING:
adhesive tape
0.8
2.5±0.1
25.0±0.3
4-R4.0
0.6max
4.0 ± 0.1
1.9±0.3
25.0±0.3
Dimension: mm
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.10.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Iridium Patch Antenna
APAE1621R2540ABDD1-T
RoHS/ RoHS II compliant
25.0 x 25.0 x 4.0mm
PACKAGING:
“T” is for a vacuum sealed tray containing 50 units. Each vacuum bag contains 5 trays.
1000 pieces is the suggested quantity containing -20 trays with 50-pcs per Tray.
NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination
during storage.
8
3,6
5
NO.
1
1
7
4
2
序号
名 称
2
Package
3
4
Vacuum Bag
Certificate of approval
5
Label
6
7
Cushion
Tray
8
Adhesive tape
数量
1
内 盒(七)
4
2
3
外箱十二
1
20
4
5
Name
Inner Box
垫片(二)
合格证
标 签
1
5
6
7
包装座(二)
真空袋(一)
24
4
8
胶带
3.5
Inner box Dimensions
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
NOTE:
1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information.
2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement.
3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification.
4) When changing your production process, please notify ABRACON immediately.
5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. ABRACON’s products are not
specifically designed for Military, Aviation, Aerospace, Life-dependant Medical
applications or any application requiring high reliability where component failure could result in loss of life and/or property.
For applications
requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is
required. Please contact ABRACON Corporation for more information.
6) All specifications and Marking will be subject to change without notice.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.10.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Similar pages