1008

SENSITRON
SEMICONDUCTOR
SHD125613
TECHNICAL DAT
DATA SHEET 1008, REV. B
HERMETIC POWER SCHOTTKY RECTIFIER
Low Forward Voltage Drop
(60 V, 35A)
Applications:
Switching Power Supply
Converters
Free-Wheeling Diodes
Polarity Protection Diode
Features:
Soft Reverse Recovery at Low and High Temperature
Low Forward Voltage Drop
Low Reverse Leakage Current
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
Maximum Ratings:
Characteristics
Peak Inverse Voltage
Max. Average Forward
Current
Max. Peak One Cycle NonRepetitive Surge Current
Max. Junction Temperature
Max. Storage Temperature
Symbol
VRWM
IF(AV)
IFSM
TJ
Tstg
Condition
50% duty cycle @TC =100°C,
rectangular wave form
8.3 ms, half Sine pulse
-
Max.
60
35
Units
V
A
150
A
-65 to +150
-65 to +175
C
C
Max.
0.75
0.64
9.0
Units
V
V
mA
420
mA
4800
pF
0.62
C/W
Electrical Characteristics:
Characteristics
Max. Forward Voltage Drop
Max. Reverse Current
Symbol
VF1
VF2
IR1
IR2
Max. Junction Capacitance
Maximum Thermal Resis.
CT
R
JC
Condition
@ 35 A, Pulse, TJ = 25 C
@ 35 A, Pulse, TJ = 125 C
@VR = 60V, Pulse,
TJ = 25 C
@VR = 60V, Pulse,
TJ = 125 C
@VR = 5V, TC = 25 C
fSIG = 1MHz,
VSIG = 50mV (p-p)
-
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD125613
TECHNICAL DATA
DATA SHEET 1008, REV. B
Mechanical Dimensions: In Inches / mm
.149 (3.78
Dia.
.139 3.53)
.260
.249
.050
.040
.545 (13.84
.535 13.60)
(6.60
6.32)
(1.27
1.02)
1
2
3
.800 (20.32
.790 20.07) .545 (13.84
.535 13.58)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
SINGLE
1
2
3
.045 (1.14
.035 0.89)
3 Places
.150(3.81) BSC
.150(3.81) BSC
2 Places
TO-254
PINOUT TABLE
TYPE
SINGLE RECTIFIER
PIN 1
CATHODE
PIN 2
ANODE
PIN 3
ANODE
Note: The Vf curves shown are for the un-packaged die only.
Typical Forward Characteristics
Typical Reverse Characteristics
(mA)
103
101
125 °C
102
125 °C
100 °C
101
75 °C
100
50 °C
10-1
25 °C
10-2
0
10
25 °C
20
30
40
50
Reverse Voltage - VR (V)
60
Typical Junction Capacitance
100
10-1
0.0
0.2
0.4
0.6
Forward Voltage Drop - VF (V)
0.8
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I
F
(A)
Instantaneous Reverse Current - I
R
102
4500
4000
3500
3000
2500
2000
1500
0
10
20
30
40
50
Reverse Voltage - VR (V)
60
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD125613
TECHNICAL DATA
DATA SHEET 1008, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]