1002

SENSITRON
SEMICONDUCTOR
SHD126411
TECHNICAL DATA
DATA SHEET 1002, REV. A
HERMETIC POWER SCHOTTKY RECTIFIER
Features:
Very Low Forward Voltage Drop
Low Power Loss, High Efficiency
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25 C UNLESS OTHERWISE SPECIFIED
RATING
SYMBOL
MAX.
UNITS
PIV
30
Volts
IO
16
Amps
PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec
IFSM
75
Amps
MAXIMUM JUNCTION CAPACITANCE
CT
2200
pF
1.5
C/W
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT @ TC=100 C
MAXIMUM THERMAL RESISTANCE (per diode)
R
MAXIMUM OPERATING TEMPERATURE
TJ,op
-65 to
+ 150
C
MAXIMUM STORAGE TEMPERATURE
TJ, stg
-65 to
+ 175
C
SYMBOL
MAX.
UNITS
Vf
0.55
Volts
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM PEAK FORWARD VOLTAGE DROP (PER LEG) (If = 16 AMPS)
TA = 25 C
TA = 125 C
MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG)
TA = 25 C
TA = 125 C
0.43
Irr
4.0
mA
200
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD126411
SENSITRON
TECHNICAL DATA
DATA SHEET 1002, REV. A
Mechanical Dimensions: In Inches / mm
.150 (3.81
Dia.
.140 3.56)
SINGLE
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
.045 (1.14
.035 0.89)
1
.665 (16.89
.645 16.38)
.537 (13.64
.527 13.39)
1.132 (28.75
1.032 26.21)
1
2
2
3
.430 (10.92
.410 10.41)
3
.035 (0.89
.025 0.63)
3 Places
.100(2.54) BSC
2 Places
.120(3.05) BSC
TO-257
PINOUT TABLE
TYPE
SINGLE RECTIFIER
PIN 1
CATHODE
PIN 2
ANODE
PIN 3
ANODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
Similar pages