Oven Controlled Crystal Oscillators AOCJYR-24.576MHz-M6069LF ESD Sensitive Pb RoHS / RoHS II Compliant 9.7 x 7.5 x 4.3 mm SMD Moisture Sensitivity Level (MSL) – 1 OVERVIEW: Abracon’s AOCJYR series of World’s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented by Rakon. This Advanced Technology coupled with Rakon’s proprietary manufacturing techniques enable ±10 ppb stability over -20°C to +70°C, with typical short-term aging of better than ±2 ppb per day. Sophisticated Integrated Oven Control architecture ensures fast warm-up time, while minimizes initial power consumption to 350mW typical at 25°C. Further, the integration of critical functionality improves overall product reliability by reducing FIT rates 10x relative to traditional discrete OCXOs. The AOCJYR series is offered in Industry leading 9.7 x 7.5 x 4.3 mm SMT package, while AOCJYR-DIL is available in 21.7 x 13.08 x 8.6 mm leaded hermetic package. FEATURES: APPLICATIONS: • Stratum 3 • Small Cells • Switches and Routers • Time & Frequency References • SyncE and IEEE 1588 • Compact package size: 9.7 x 7.5 x 4.3mm • Frequency stability over temperature as low as ±50ppb over -40 to +85°C • Low power consumption • High reliability STANDARD SPECIFICATIONS: Parameters Nominal Frequency Supply Voltage (Vdd) Input Power (warm-up) Input Power (steady-state) Operable Temperature Range Storage Temperature Range Initial Frequency Tolerance @25°C At time of shipment Reflow Shift Frequency Stability over Operating Temperature Range in Still Air Minimum Typical 3.135 24.576 3.3 1000 Maximum Units -40 400 85 MHz V mW mW ºC -55 +125 ºC ±0.5 ppm See Note 1 ±1 ppm ±50 ppb ±2 ppb/°C After 1hr recovery @25°C Ref. to (FMAX+FMIN)/2. See Note 1 Temperature ramp 1°C/minute max. ±5% variation in Vdd, ref. to freq. @ Vdd=3.3V ±5pF variation in load, ref. to freq. @ 15pF load See Note 3 Slope in Still Air 3.465 Stability vs. Supply Voltage Change ±10 ppb Load Coefficient ±10 ppb Frequency Aging (per day) First Year Frequency Aging (long-term stability) 10 Years Warm-up Time ABRACON IS ISO9001:2008 CE RTIFIED Notes <3 ±2 ±1 ppb ppm ±3 ppm minute @25°C still air See Note 2 Revised: 08.20.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Oven Controlled Crystal Oscillators AOCJYR-24.576MHz-M6069LF ESD Sensitive Pb RoHS / RoHS II Compliant 9.7 x 7.5 x 4.3 mm SMD STANDARD SPECIFICATIONS CONTINUED: Parameters Minimum Root Allan Variance Acceleration Sensitivity Rise and Fall Time (tr, tf) Duty Cycle Control Voltage (Vc) Frequency Tuning Range (over Control Voltage range) Notes @25°C, τ=0.1s 7x10 -11 @25°C, τ=1.0s 7x10 -11 @25°C, τ=10s 8x10 -11 @25°C, τ=100s 8x10 -11 @25°C, τ=1000s Gamma vector of all 3 axes from 30Hz to 1500Hz ppb/g LV C M O S 90%*Vdd V 10 15 45 0.5 ±5 10%*Vdd V 20 pF 4 55 2 .5 ns % V ±15 Frequency Tuning Linearity Slope Port Input Impedance Modulation Bandwidth Phase Noise @ 24.576MHz Carrier @ 1 Hz offset @ 10 Hz offset @ 100 Hz offset @ 1,000 Hz offset @ 10,000 Hz offset @ 100,000 Hz offset @ 1,000,000 Hz offset Units 7x10 Low-level Output Voltage (VOL) Output Load Maximum -11 <2 Output Type High-level Output Voltage (VOH) Typical 1 ppm % Positive 80 3.5 -55 -88 110 -135 -148 -152 -153 Measured at 50% level Ref. to Frequency @ Vc=1.5V Deviation from linear over control voltage range kΩ kHz dBc / Hz dBc / Hz dBc / Hz dBc / Hz dBc / Hz dBc / Hz dBc / Hz Note: 1. The characteristics of the component may be temporarily affected by the processes of assembly and soldering. The frequency specifications apply 48 hours after assembly. Nominal conditions apply unless otherwise stated. 2. Time needed for frequency to be within ±20ppb reference to frequency after 1hour, at 25°C. Parameter is assembly and operating history dependent 3. After 30 days of continuous operation. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 08.20.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Oven Controlled Crystal Oscillators AOCJYR-24.576MHz-M6069LF ESD Sensitive Pb RoHS / RoHS II Compliant 9.7 x 7.5 x 4.3 mm SMD REFERENCE DESIGN INFORMATION AOCJYR-24.576MHZ-M6069LF is equivalent to Rakon P/N M6069LF. PART IDENTIFICATION: AOCJYR- 24.576MHz -M6069LF Packing Blank: Bulk T: Tape & Reel (1k/reel) OUTLINE DIMENSION: Recommended Land Pattern Pin 1 2 3 4 Function Control Voltage Ground RF-output Supply Voltage Note: 1. For correct operation, decouple the supply voltage with a 10µF capacitor close to the oscillator. 2. The GND of the control voltage needs to be connected directly to pin 2 as ground lead impedance may cause performance degradation. Dimension: mm ABRACON IS ISO9001:2008 CE RTIFIED Revised: 08.20.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Oven Controlled Crystal Oscillators AOCJYR-24.576MHz-M6069LF ESD Sensitive Pb RoHS / RoHS II Compliant 9.7 x 7.5 x 4.3 mm SMD REFLOW PROFILE: TAPE & REEL: Packaging: 1000pcs/reel Reel Size: Ø13” Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 08.20.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com