APAMPS-105

GPS+GSM Active Antenna Module- Adhesive Mount
APAMS-105
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
Ø76.8 x 15.8mm
MSL level: Not Applicable
FEATURES:
• Dual Band
• High Reliability/Sensitivity
• Compact Size, Easy to install
• ROHS Compliant
TYPICAL APPLICATIONS:
• GPS navigation
• Vehicle tracking
• Telemetry Applications
• Asset tracking
• Emergency call systems
STANDARD SPECIFICATIONS:
Antenna
Parameters
Center Frequency
Bandwidth
VSWR at Center Frequency
Polarization Model
Impedance
Gain
Operating Temperature
Storage Temperature
Min.
1574.40
10.0
Typ.
1575.42
Max.
1576.44
Units
MHz
MHz
Note
1.5:1
(Right Hand Circular Polarization)
RHCP
50
5
-40
-45
Ω
dBic
˚C
˚C
+80
+85
(Based on 70× 70mm ground plane)
Low Noise Amplifier (LNA)
Parameters
Center Frequency
DC Voltage
Gain
Output VSWR
Noise Figure
DC current
Min.
1574.40
2.5
25
Typ.
1575.42
3.0
26
10.5
Max.
1576.44
3.5
28
2.0
1.5
12.5
Units
MHz
Note
dB
(without cable +25°C ± 10°C)
mA
(+25°C ± 10°C)
(At 3.0V)
Max.
960
1880
Units
MHz
MHz
Note
-1
1
Ω
dBi
dBi
(without cable +25°C ± 10°C)
(At 900)
(At 1800)
V
Electrical Characteristics (GSM)
Parameters
Working Frequency
V.W.S.R
Impedance
Min.
806
1710
Typ.
50
Peak Gain
Azimuth
Polarization
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Omni Directional
Linear Polarization
2:1
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.23.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
GPS+GSM Active Antenna Module- Adhesive Mount
APAMS-105
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
Ø76.8 x 15.8mm
ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS
S11: Input VSWR
Test condition: 27x27mm ground
LNA REFLECTION PROFILE
S21: LNA Gain
Test condition: DC 3.0V
OUTLINE DRAWING:
Bottom View
Side View
Top View
Parameters
L1 (Cable1 Length)
L2 (Cable2 Length)
Antenna
PCB
GPS RF Connector
GSM RF Connector
Shielding
Thickness
Mounting Type
Description
300±10cm
300±10cm
Dielectric Ceramics
FR4
SMA-J3
FME-k3
Tinplate
15.8mm
Adhesive Tape
Unit:mm
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.23.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
GPS+GSM Active Antenna Module- Adhesive Mount
APAMS-105
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
Ø76.8 x 15.8mm
PRODUCT IMAGE:
PACKAGING:
Each 450 x 400 x 300mm size carton includes 60 pieces of antenna
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.23.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Similar pages