APAMP-109

GPS Active Antenna Module- Adhesive Mount
APAMP-109
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
50.6 X 50.6 X 15.1mm
MSL level: Not Applicable
FEATURES:
• High Reliability/Sensitivity
• Compact Size
• Easy to install (adhesive base tape)
• ROHS Compliant
TYPICAL APPLICATIONS:
• Automotive Navigation
• Automotive Monitoring
• Personal Tracking
STANDARD SPECIFICATIONS:
Antenna
Parameters
Frequency
Bandwidth
VSWR at Center Frequency
Polarization Model
Impedance
Gain
Operating Temperature
Storage Temperature
Min.
1574.40
10.0
Typ.
1575.42
Max.
1576.44
Units
MHz
MHz
Note
1.5:1
(Right Hand Circular Polarization)
RHCP
50
5
-40
-45
+80
+85
Ω
dBic
˚C
˚C
(Based on 70× 70mm ground plane)
Low Noise Amplifier (LNA)
Parameters
Frequency
DC Voltage
Gain
Output VSWR
Noise Figure
DC current
Min.
1574.40
2.5
25
Typ.
1575.42
26
10
Max.
1576.44
3.5
28
2.0
1.5
12.5
Units
MHz
Note
dB
(+25°C ± 10°C)
mA
(+25°C ± 10°C)
(At 3.0V)
V
ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS
S11: Input VSWR
Test condition: 39x39mm ground
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.27.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
GPS Active Antenna Module- Adhesive Mount
APAMP-109
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
50.6 X 50.6 X 15.1mm
LNA REFLECTION PROFILE
S21: LNA Gain
Test condition: DC 3.3V
OUTLINE DRAWING:
0.58±0.50
Side View
15.1±0.50
25±2.00
50.6±0.50
50.6±50
Unit:mm
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Bottom View
Parameters
L (Cable Length)
Antenna
RF Cable
PCB
RF Connector
Shielding
Thickness
Mounting Type
Description
300±10cm
Dielectric Ceramic
RG174
FR4
SMA-J3
Tinplate
15.5mm
Adhesive Tape
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.27.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
GPS Active Antenna Module- Adhesive Mount
APAMP-109
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
50.6 X 50.6 X 15.1mm
PRODUCT IMAGE:
PACKAGING:
Each 475 x 215 x 215 mm size carton includes 100 pieces of antenna.
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.27.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Similar pages