DKD Package 24-Lead Plastic DFN (7mm × 4mm) (Reference LTC DWG # 05-08-1864 Rev Ø) 0.70 ± 0.05 4.50 ± 0.05 6.43 ±0.05 2.64 ±0.05 3.10 ± 0.05 PACKAGE OUTLINE 0.50 BSC 0.25 ± 0.05 5.50 REF RECOMMENDED SOLDER PAD LAYOUT APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED 7.00 ±0.10 13 R = 0.115 TYP 24 R = 0.05 TYP 0.40 ± 0.10 6.43 ±0.10 4.00 ±0.10 2.64 ±0.10 PIN 1 NOTCH R = 0.30 TYP OR 0.35 × 45° CHAMFER PIN 1 TOP MARK (SEE NOTE 6) 12 0.75 ±0.05 0.50 BSC 0.25 ± 0.05 5.50 REF BOTTOM VIEW—EXPOSED PAD 0.200 REF 1 (DKD24) QFN 0210 REV Ø 0.00 – 0.05 NOTE: 1. DRAWING PROPOSED TO BE MADE VARIATION OF VERSION (WXXX) IN JEDEC PACKAGE OUTLINE M0-229 2. DRAWING NOT TO SCALE 3. ALL DIMENSIONS ARE IN MILLIMETERS 4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE 5. EXPOSED PAD SHALL BE SOLDER PLATED 6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE TOP AND BOTTOM OF PACKAGE