Download

SD6030 Series
Low Profile Power Inductors
Description
RoHS
• 125°C maximum total temperature operation
2002/95/EC
• Low profile surface mount inductors
• 6.0mm x 6.0mm x 3.0mm surface mount package
• Ferrite core material
• Shielded drum core reduces EMI
• Inductance range from 2.7µH to 680µH
• Current range from 4.08 Amps to 0.16 Amps
• Frequency range up to 1MHz
Applications
• Notebook computers, Digital cameras
• DSL modems, PDA’s
• High Power LED driver
• MP3, CD players, GPS receivers
• Cellular phones, Smart phones
• Wireless notebook adapters
• Battery power, TFT-LCD Bias supplies
• PCMCIA, Cardbus32, MiniPCI cards
Environmental Data
• Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(range is application specific)
• Solder reflow temperature: +260°C max. for 10 seconds
maximum
Part Number
SD6030-2R7-R
SD6030-3R3-R
SD6030-4R2-R
SD6030-5R0-R
SD6030-5R8-R
SD6030-7R8-R
SD6030-100-R
SD6030-120-R
SD6030-150-R
SD6030-180-R
SD6030-220-R
SD6030-270-R
SD6030-330-R
SD6030-360-R
SD6030-440-R
SD6030-520-R
SD6030-680-R
SD6030-820-R
SD6030-101-R
SD6030-121-R
SD6030-151-R
SD6030-181-R
SD6030-221-R
SD6030-271-R
SD6030-331-R
SD6030-391-R
SD6030-471-R
SD6030-561-R
SD6030-681-R
Rated
Inductance
(µH)
2.7
3.3
4.2
5.0
5.8
7.8
10
12
15
18
22
27
33
36
44
52
68
82
100
120
150
180
220
270
330
390
470
560
680
Packaging
• Supplied in tape and reel packaging, 2600 per reel
OCL (1)
µH ± 30%
Irms (2)
Amperes
Isat (3)
Amperes
2.7
3.3
4.1
4.9
5.8
7.8
9.3
11.3
14.1
17.1
20.4
26.0
32.4
34.4
44.0
52.0
65.6
81.6
94.4
110.1
144.5
175.7
210.9
264.2
313.5
373.7
460.0
546.2
659.4
4.08
3.54
3.11
2.81
2.58
2.38
2.15
1.99
1.71
1.65
1.57
1.31
1.26
1.19
1.10
0.99
0.92
0.80
0.76
0.70
0.64
0.55
0.50
0.44
0.38
0.35
0.33
0.30
0.27
2.60
2.40
2.20
1.90
1.80
1.60
1.30
1.20
1.10
1.00
0.90
0.85
0.75
0.70
0.62
0.58
0.52
0.46
0.42
0.40
0.35
0.32
0.30
0.27
0.25
0.22
0.20
0.18
0.16
(1) Open Circuit Inductance Test Parameters: 100kHz, 0.1V, 0.0Adc.
(2) Irms: DC current for an approximate ∆T of 40°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and
proximity of other heat generating components will affect the temperature rise. It
is recommended that the temperature of the part not exceed 125°C under worst
case operating conditions verified in the end application.
(3) Isat Amperes peak for 35% rolloff (@25°C)
DCR
[email protected]°C
(Typical)
13
18
23
28
33
39
48
56
76
82
90
130
140
157
185
226
263
343
385
517
608
817
1000
1300
1733
2083
2250
2767
3458
DCR
[email protected]°C
(Maximum)
18
24
31
38
45
53
65
76
103
110
122
175
189
212
250
305
355
463
520
620
730
980
1200
1560
2080
2500
2700
3320
4150
K-factor
(4)
34
30
27
24
22
19
17
16
14
13
12
11
9.3
8.7
7.9
7.2
6.5
5.9
5.6
5.6
5.0
4.5
4.0
3.6
3.3
3.0
2.8
2.5
2.3
(4) K-factor: Used to determine B p-p for core loss (see graph).
B p-p = K*L*∆I, B p-p(mT), K: (K factor from table), L: (Inductance in uH),
∆I (Peak to peak ripple current in Amps).
(5) Part Number Definition: SD6030-xxx-R
SD6030 = Product code and size; -xxx = Inductance value in uH;
R = decimal point; If no R is present, third character = # of zeros.
-R suffix = RoHS compliant
SD6030 Series
Low Profile Power Inductors
Mechanical Diagrams
Dimensions are in millimeters.
xxx = Inductance value in uH. R = decimal point. If no R is present third character = # of zeros.
wwllyy = Date code, R = Revision level.
Packaging Information
Parts packaged on 13" Diameter reel,
2,600 parts per reel.
Core Loss
1
1MHz
500kHz
300kHz
200kHz
100kHz
Core Loss (W)
0.1
0.01
0.001
0.0001
1
10
100
Bp-p (mT)
1000
SD6030 Series
Low Profile Power Inductors
Temperature Rise vs. Loss
Inductance Characteristics
PM-4150 3/07
© Cooper Electronic
Technologies 2007
Visit us on the Web at www.cooperbussmann.com
1225 Broken Sound Pkwy. Suite F Boca Raton, FL 33487
Tel: +1-561-998-4100 Toll Free: +1-888-414-2645 Fax: +1-561-241-6640
This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic
Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been
selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the
express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Similar pages