2,2 TECHNICAL CHARACTERISTICS C C 1 5,08 6,80 5,08 O 1,0 4,6 0,42 5,08 5,08 2 10,0 SPECIFICATION >Contact Rating: Switching: Non-Switching: >Contact Resistance: Initial: After Life Test: >Insulation Resistance: >Dielectric Strength: >Operating Force: >Life cycle: >Position: >Actuator: 80mOHM max. 200mOHM max. min. 100MOHM at 250VDC 250VAC for 1 minute 700g max. 10.000 steps 8 Arrow type MATERIAL >Cover: >Base: >Actuator: >Contact: >Terminal: PA66 UL 94V-0, color light grey PA66 UL 94V-0, color black POM UL HB Gold Plated Gold Plated 150mA, 24VDC 400mA, 24VDC 3,5 10,0 RECOMMENDED LAYOUT 0,2 WASHABLE DEFINITION Please do not submerse washable products into water or cleaning agents or put them in locations exposed water or liquids completely. When cleaning by hand (brushing), please do not use excessive force on our switch to avoid malfunction afterwards, because you could deform function relevant areas or you could damage sealing functions. Do not clean washable series immediately after soldering. The cleaning agent may be absorbed into the switch through respiration while the switch cools. 12,3 0,54 SOLDERING INFORMATION >Terminal in THT version >Wave soldering at 260°C for 10 sec. max >Hand soldering at 350°C for 3 sec. max ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: ROHS, Reach O 9,6 ±0,1 PACKAGING INFORMATION >Tube Scale - 2:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Projection Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the a revised MatchCode 14-07-25 AL safety must be performed before by the user before usage. REV FILE DATE BY Part number 429 427 320 908 Color of Actuator dark grey GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Basic material Date Drawn 14-05-07 Checked 14-05-07 DESCRIPTION WE eiCan CAD Name Fandrey Hsu Position 8 WS-ROTU 10x10mm right angle rotary Switch, 8 position, THT version 2:1 Position Würth Elektronik Scale eiCan Drawing.- No. 429427320908 EDV NO 429427320908.dft Code Real Code SIZE A4 System :Solid EdgeST6