S3 Package 3-Lead Plastic SOT-23 (Reference LTC DWG # 05-08-1631 Rev D) 0.764 2.80 – 3.04 (.110 – .120) 0.8 ±0.127 2.10 – 2.64 (.083 – .104) 2.74 1.20 – 1.40 (.047 – .060) 0.96 BSC 1.92 0.45 – 0.60 (.017 – .024) 0.89 – 1.03 (.035 – .041) RECOMMENDED SOLDER PAD LAYOUT 0.37 – 0.51 (.015 – .020) 0.89 – 1.12 (.035 – .044) 0.01 – 0.10 (.0004 – .004) 0.09 – 0.18 (.004 – .007) 0.55 (.022) REF 0.20 – 0.25 (.008 – .010) NOTE: 1. CONTROLLING DIMENSION: MILLIMETERS MILLIMETERS 2. DIMENSIONS ARE IN (INCHES) 3. DRAWING NOT TO SCALE 4. DIMENSIONS ARE INCLUSIVE OF PLATING 5. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR 6. MOLD FLASH SHALL NOT EXCEED .254mm 7. PACKAGE JEDEC REFERENCE IS TO-236 VARIATION AB 1.78 – 2.05 (.070 – .081) S3 SOT-23 REV D 0910