1,55 1,55 sectional drawing A-A 1,0 7,30 1,75 2,40 3,50 -0,15 A A 1,00 2,90 3,60 TECHNICAL CHARACTERISTICS O 4,0 2,85 1,0 MATERIAL >Base: POM UL HB MOUNTING INSTRUCTION >Please mount the actuator that cut-out is in line with the positioning arrow of the rotary switch. >For reflow soldering only to be fitted after the soldering process. PACKAGING INFORMATION Scale - 3:1 >Bag GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Projection This electronic component is designed and developed with the intention for use in general electronics equipments. Basic material Date Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Drawn 11-09-27 Name Jelisarow Checked In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. WE eiCan CAD REV FILE DATE BY EDV NO DESCRIPTION AssSw Spindle for Rotary Switch Cross type, colour: grey Würth Elektronik eiCan 714284060.dft Scale Drawing.- No. 3:1 714284060 Position SIZE A4 System :Solid Edge V20