SPECIFICATION Land Pattern detail A 4 3 12,0 ± 0,1 2 3 4 0 1 +0,0 -0,3 5,0 15,3 +0,1 -0,05 2 1,8 1,0 1 5,0 16,0 ± 0,1 >Rating : >Contact Resistance : Initial : After Life Test : >Insulation Resistance : >Dielectric Strength : >Stroke : >Bounce : 50mA, 12VDC 100mΩ max. 2Ω max. min. 100MΩ at 500VDC 250VAC for 1 minute 0.3 ± 0.1mm 10ms max. MATERIAL 0,5 max. >Cover : >Stem : >Frame : >Contact : >Terminal : Stainless Steel PA9T UL 94 V-0 PA9T UL 94 V-0, color Black Stainless Steel with Silver Copper Alloy with Silver Schematic SOLDERING INFORMATION 3,5 8,5 0,3 ± 0,1 O 7,0 O 6,8 >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max A ENVIRONMENTAL q 8,6 q 12,0 Storage condition : Operation condition : Compliance : -40°C ~ +85°C -40°C ~ +85°C Lead Free , ROHS , Reach PACKAGING INFORMATION >Tape & Reel Scale - 2:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 REV. FILE DATE BY www.we-online.de [email protected] CREATED LeTe Part number Force Color of Stem 430 172 085 816 160g ± 50gf Black 500,000 430 162 085 826 260g ± 70gf White 300,000 CHECKED JLi GENERAL TOLERANCE DIN ISO 2768-1m DESCRIPTION Life cycle SCALE PROJECTION METHOD 2:1 TECHNICAL REFERENCE _________ WS-TASV Tact Switch, SMD version ORDER CODE SIZE STATUS DATE 12x12 mm Released 2015-10-27 4301x20858x6 BUSINESS UNIT eiCan PAGE 1 /1 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.