4336

SHD625051
SHD625051P
SHD625051N
SHD625051D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4336, REV. B
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 600-VOLT, 20 AMP POWER SILICON CARBIDE RECTIFIER IN A HERMETIC TO-254
PACKAGE AVAILABLE SCREENED TO ANY REQUIRED LEVEL
FEATURES:
• NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
• NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
• Ceramic Seal Option – For ceramic seals use part number prefix SHDC
• High Frequency Option - Non-magnetic Glidcop leads with ceramic seals are available for improved
performance at high frequency; use part number prefix SHDCG
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
600
Volts
MAXIMUM DC OUTPUT CURRENT (With TC = 65 OC for P and N suffixes)
IO
20
Amps
MAXIMUM DC OUTPUT CURRENT (With TC = 65 OC for Single and D suffixes)
IO
10
Amps
IFRM
50
Amps
Pd
40
W
RθJC
2.5
°C/W
Top, Tstg
-55 to 200
°C
PEAK INVERSE VOLTAGE
MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG
(t = 8.3ms, Sine) per leg, TC = 25 OC
MAXIMUM POWER DISSIPATION, TC = 25 OC,
MAXIMUM THERMAL RESISTANCE, Junction to Case PER LEG
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE*
* Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the
packaged device above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be
performed to 175C.
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
TYP
MAX.
UNITS
MAXIMUM FORWARD VOLTAGE DROP
TJ = 25°C
1.65
1.80
Pulsed (If = 10 A PER LEG) Vf
TJ = 150 °C
2.05
2.20
MAXIMUM FORWARD VOLTAGE DROP
TJ = 25°C
1.35
1.45
Pulsed (If = 6 A PER LEG) Vf
TJ = 150 °C
1.60
1.70
0.04
0.15
TJ = 150 °C
0.08
0.50
mA
CT
250
350
pF
35
N/A
nC
MAXIMUM REVERSE CURRENT (Ir @ 600V PIV PER LEG) TJ = 25 °C
JUNCTION CAPACITANCE CT) (Vr =5V) per leg
TOTAL CAPACITIVE CHARGE
QC per leg
(VR=600V IF=20A di/dt=500A/μs TJ=25°C) This is design information only
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • © 2009 Sensitron Semiconductor
Volts
Volts
SENSITRON
SEMICONDUCTOR
SHD625051
SHD625051P
SHD625051N
SHD625051D
TECHNICAL DATA
DATA SHEET 4336, REV. B
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • © 2009 Sensitron Semiconductor
SHD625051
SHD625051P
SHD625051N
SHD625051D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4336, REV. B
MECHANICAL DIMENSIONS
TO-254
.149
.139
(3.78
Dia.
3.53)
.800 (20.32
.790 20.07)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
.260
.249
.050
.040
.545 (13.84
.535 13.60)
1
2
(6.60
6.32)
(1.27
1.02)
.545 (13.84
.535 13.58)
3
.045 (1.14
.035 0.89)
3 Places
.150(3.81) BSC
.150(3.81) BSC
2 Places
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON
CATHODE
COMMON
ANODE
ANODE/
CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
SCHEMATIC
1
2
SINGLE
3
1
2
3
COMMON CATHODE
1
2
3
COMMON ANODE
3
2
DOUBLER
1
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • © 2009 Sensitron Semiconductor
SENSITRON
SEMICONDUCTOR
SHD625051
SHD625051P
SHD625051N
SHD625051D
TECHNICAL DATA
DATA SHEET 4336, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • © 2009 Sensitron Semiconductor
Similar pages