4289

SENSITRON
SEMICONDUCTOR
SHB601112E
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4289, Rev. B
SILICON CARBIDE SINGLE PHASE FULL WAVE BRIDGE
DESCRIPTION: A 1200-VOLT, 10 AMP POWER SILICON CARBIDE SINGLE PHASE FULL WAVE
BRIDGE IN A HERMETIC 5-PIN TO-258 (MO-078) PACKAGE
FEATURES:
• NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
• NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
1200
Volts
IO
10
Amps
MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG
(t = 8.3ms, Sine)
IFRM
50
Amps
MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG
(t = 10μs, pulse)
IFSM
250
Amps
Pd
80
W
RθJC
0.50
°C/W
Top, Tstg
-55 to
+200
°C
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT PER LEG
MAXIMUM POWER DISSIPATION
MAXIMUM THERMAL RESISTANCE (Junction to Case)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
* Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device
above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C.
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
TYP
MAX.
MAXIMUM FORWARD VOLTAGE DROP If=10A PER LEG, TJ=25 °C
1.60
1.80
TJ=175 °C
2.50
3.00
0.01
0.20
0.02
1.00
MAXIMUM REVERSE CURRENT PIV = 1200V PER LEG, TJ = 25 °C
TJ = 175 °C
MAXIMUM JUNCTION CAPACITANCE PER LEG (Vr =400V)
TOTAL CAPACITIVE CHARGE PER LEG (VR=1200V, IF=10A,
di/dt=500A/μs and TJ=25°C) QC
CT
70
60
UNITS
Volts
mA
pF
N/A
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
nC
SHB601112E
SENSITRON
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4289, Rev. B
MECHANICAL DIMENSIONS: In Inches
5
2
4
MO-078
1
PINOUT TABLE
DEVICE TYPE
SINGLE PHASE FULL WAVE BRIDGE
PIN 1
DC(-)
PIN 2
AC(1)
PIN 3
NC
PIN 4
AC(2)
PIN 5
DC(+)
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
SHB601112E
SENSITRON
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4289, Rev.B
Forward and Reverse Characteristics for Individual Diode
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the
latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic
equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature
assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the
datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting
from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application
will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any
third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related
laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]
Similar pages