4984

SHDC624122
SHDC624122P
SHDC624122N
SHDC624122D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4984, REV. B
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 1200-VOLT, 40 AMP POWER SILICON CARBIDE RECTIFIER IN A HERMETIC TO-258
PACKAGE WITH CERAMIC SEAL
FEATURES:
• NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
• NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
• SCREENED VERSIONS ARE AVAILABLE
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
1200
Volts
IO
20
Amps
MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG
(t = 8.3ms, Sine) TC = 25 OC
IFRM
60
Amps
MAXIMUM NON-REPETITIVE FORWARD SURGE CURREN PER LEG
O
(t = 10μs, pulse) TC = 25 C
IFSM
250
Amps
Pd
80
W
MAXIMUM THERMAL RESISTANCE, Junction to Case, Per Dual Package
RθJC
0.5
°C/W
MAXIMUM OPERATING TEMPERATURE RANGE
Top
-55 to
+175
°C
MAXIMUM STORAGE TEMPERATURE RANGE*
Tstg
-55 to
+200
°C
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT PER LEG (With Cathode Maintained @ TC =
65 OC)
MAXIMUM POWER DISSIPATION, TC = 25 OC
* Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device
above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C.
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
FORWARD VOLTAGE DROP PER LEG(If = 20A) Vf
REVERSE CURRENT PER LEG (1200V PIV) Ir
JUNCTION CAPACITANCE (Vr =400V, f = 1MHz) CT PER LEG
TYP
MAX.
TJ = 25 °C
1.6
1.8
TJ = 175 °C
2.5
3.0
TJ = 25 °C
0.02
0.40
TJ=175 °C
0.04
2.00
mA
TJ = 25 °C
140
N/A
pF
100
N/A
nC
TOTAL CAPACITIVE CHARGE PER LEG (VR=1200V IF=10A di/dt=500A/μs
TJ=25°C) QC
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
UNITS
Volts
SHDC624122
SHDC624122P
SHDC624122N
SHDC624122D
SENSITRON
TECHNICAL DATA, PROVISONAL DATA ONLY
DATA SHEET 4984, REV. B
MECHANICAL DIMENSIONS: IN Inches / mm
.165 (4.19
Dia.
.155 3.94)
.270 (6.86
.240 6.10)
.695 (17.65
.685 17.40)
TO-258
.045 (1.14
.035 0.89)
.835 (21.21
.815 20.70)
.707 (17.96
.697 17.70)
1.302(33.07
1.20230.53)
1
2
.550 (13.97
.530 13.46)
3
.065 (1.65
.055 1.40)
3 Places
.200(5.08) BSC
2 Places
.140(3.56) BS
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON
CATHODE
COMMON
ANODE
ANODE/
CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
SCHEMATIC
1
2
SINGLE
3
1
2
3
COMMON CATHODE
1
2
3
COMMON ANODE
3
2
DOUBLER
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
1
SENSITRON
TECHNICAL DATA, PROVISONAL DATA ONLY
DATA SHEET 4984, REV. B
SHDC624122
SHDC624122P
SHDC624122N
SHDC624122D
TYPICAL PERFORMANCE PER LEG
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]
Similar pages