LVDS Output Port - Surge Protection Solution Products TBU-CA085-200-WH Objective Compliance Low voltage differential signaling (LVDS) utilizes a 1.25 V electrical signal. This solution protects LVDS which is exposed to high level surges. IEC 61000-4-5; Class 4 and 5; 4000 V / 95 A Solution 2 TBU® High-Speed Protectors: TBU-CA085-200-WH 2 GDTs: 2031-42T-SM-RPLF 2 Switching Diode Arrays: CDSOT23-S2004 Alternate Recommendations Other PortNote® Solutions: • LVDS: Input Port - Surge Protection Specific solutions are also available for lower levels of IEC 61000-4-5 as well as the ITU-T and GR-1089-CORE documents. Benefit This solution provides line output protection without impairing the LVDS signal up to 3 GHz. 2031-42T-SM-RPLF VCC TBU-CA085-200-WH 2031-42T-SM-RPLF VCC CDSOT23-S2004 CDSOT23-S2004 VCC Input TBU-CA085-200-WH LVDS Device 2031-42T-SM-RPLF Design Kit CDSOT23-S2004 The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. PN-DESIGNKIT-16 Americas: Tel +1-951 781-5500 Fax +1-951 781-5700 Europe: Tel +41-(0)41 768 55 55 Asia-Pacific: Tel +886-2 256 241 17 Fax +41-(0)41 768 55 10 Fax +886-2 256 241 16 COPYRIGHT© 2012 • BOURNS, INC. • 6/12 • e/CPK1135 • “PortNote” is a registered service mark of Bourns, Inc. “Bourns” and “TBU” are registered trademarks of Bourns, Inc. in the U.S. and other countries. Bourns® PortNote® solutions provide protection recommendations for typical port threats. For more information, go to: www.bourns.com or email: [email protected]