Download

1W DC-DC Converter P1D-Series
●
●
●
●
●
●
7 Pin SIL
Low ripple and noise
Up to 3000 VDC isolation
MTBF > 2 Mhours
-40...85°C Operating temperature range
High efficiency
Model selection guide
Typ
Input nominal
voltage
[VDC]
Input current
no-load
[mA]
Single output
P1D0505S
4.5..5.5
P1D0509S
4.5..5.5
P1D0512S
4.5..5.5
P1D0515S
4.5..5.5
P1D1205S
10.8..13.2
P1D1209S
10.8..13.2
P1D1212S
10.8..13.2
P1D1215S
10.8..13.2
P1D1505S
13.5…16.5
P1D1509S
13.5…16.5
P1D1512S
13.5…16.5
P1D1515S
13.5…16.5
P1D2405S
21.6..26.4
P1D2409S
21.6..26.4
P1D2412S
21.6..26.4
P1D2415S
21.6..26.4
P1D4805S
43.2..52.8
P1D4809S
43.2..52.8
P1D4812S
43.2..52.8
P1D4815S
43.2..52.8
Dual output
P1D0505D
4.5..5.5
P1D0509D
4.5..5.5
P1D0512D
4.5..5.5
P1D0515D
4.5..5.5
P1D1205D
10.8..13.2
P1D1209D
10.8..13.2
P1D1212D
10.8..13.2
P1D1215D
10.8..13.2
P1D1505D
13.5…16.5
P1D1509D
13.5…16.5
P1D1512D
13.5…16.5
P1D1515D
13.5…16.5
P1D2405D
21.6..26.4
P1D2409D
21.6..26.4
P1D2412D
21.6..26.4
P1D2415D
21.6..26.4
P1D4805D
43.2..52.8
P1D4809D
43.2..52.8
P1D4812D
43.2..52.8
P1D4815D
43.2..52.8
Suffix: “H” for 3kV isolation voltage
Input current
full-load
[mA]
Output voltage Output current
Efficiency typ.
[VDC]
[mA]
[%]
Capacitive
load
[µF]
20
20
20
20
15
15
15
15
10
10
10
10
7
7
7
7
5
5
5
5
250
230
230
230
98
96
95
95
79
77
76
76
50
49
49
49
27
26
26
26
5.0
9.0
12.0
15.0
5.0
9.0
12.0
15.0
5.0
9.0
12.0
15.0
5.0
9.0
12.0
15.0
5.0
9.0
12.0
15.0
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
84
86
87
87
84
86
88
88
84
86
87
89
83
86
87
87
79
82
82
81
220
220
100
100
220
220
100
100
220
220
100
100
220
220
100
100
220
220
100
100
20
20
20
20
15
15
15
15
10
10
10
10
7
7
7
7
5
5
5
5
250
230
230
230
98
96
95
95
79
77
76
76
50
49
49
49
27
26
26
26
±5.0
±9.0
±12.0
±15.0
±5.0
±9.0
±12.0
±15.0
±5.0
±9.0
±12.0
±15.0
±5.0
±9.0
±12.0
±15.0
±5.0
±9.0
±12.0
±15.0
±100
±56
±42
±34
±100
±56
±42
±34
±100
±56
±42
±34
±100
±56
±42
±34
±100
±56
±42
±34
84
86
87
88
85
86
89
89
85
87
87
89
84
87
87
87
80
82
82
82
2 x 100
2 x 100
2 x 47
2 x 47
2 x 100
2 x 100
2 x 47
2 x 47
2 x 100
2 x 100
2 x 47
2 x 47
2 x 100
2 x 100
2 x 47
2 x 47
2 x 100
2 x 100
2 x 47
2 x 47
Page 1 of 3
Deutschland:
Inselkammerstraße 10
D-82008 Unterhaching
Tel.: 089 614 503-10
E-Mail: [email protected]
Schweiz:
Gründenstrasse 82
CH-8247 Flurlingen
Tel.: 052 647 42 00
E-Mail: [email protected]
1W DC-DC Converter P1D-Series
Specifications
Input
Voltage range
Filter
I/O-Isolation:
DC-Isolation voltage
tested for 3 sec.
Resistance
Capacitance
Output
Voltage accuracy
Ripple and noise
(at 20 MHz BW)
Line voltage regulation
@ 1% Vin change
Temperature coefficient
Short circuit protection
Voltage stability at load
change 10...100%
EMC
EME
ESD
RS
± 10 %
Capacitors
1 kV, 3 kV
9
10 Ω, max.
60 pF, typ.
± 3 %, max.
50 mVp-p, max.
± 1.2 %
0.02 % / °C
Momentary
± 10 %
± 20 % @ 3.3 V output
EN 55022 Class A
IEC 61000-4-2 / A
IEC 61000-4-3 / A
General
Safety standard
Switching frequency
Environmental
Operating temperature
(ambient)
Case temperature
Storage temperature
Derating
Humidity
Cooling
Physical
Dimensions
Weight
Case material
Capacitive Load:
Single Output
Dual Output
Pin soldering temperature
1.5mm distance from body
IEC 60950-2001
~ 70 kHz
-40 °C to +85 °C
100 °C, max.
-40 °C to +125 °C
None required
Up to 95%,
non-condensing
Free-air convection
SIL
19.50 x 6.00 x 9.50 mm
2.3 g
non-conductive black plastic
(UL94V-0 rated)
220 µF, max.
100 µF, max.
260°C for 10sec
Output voltage at load change
Page 2 of 3
Deutschland:
Inselkammerstraße 10
D-82008 Unterhaching
Tel.: 089 614 503-10
E-Mail: [email protected]
Schweiz:
Gründenstrasse 82
CH-8247 Flurlingen
Tel.: 052 647 42 00
E-Mail: [email protected]
1W DC-DC Converter P1D-Series
1.
2.
3.
4.
5.
6.
Ripple and Noise measured with 20MHz bandwidth
Tested by minimal Vin and constant resistive load.
Measured Input reflected ripple current with a simulated source inductance of 12µH.
Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating.
Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications.
For reduce converter’s ripple and noise, it is recommended to add a 4.7..100μF(2 x 4.7..68μF for dual output) capacitor on
output. For EMI performance improvement, it is recommended to add a 12μH (18µH for Vin-48V-types) inductor and a
10..100μF capacitor in input end.
Dimensions
6.0
19.5
PHI-CON
9.5
1
2
4
5
6
7
3.05
0.5
2.54
15.2
0.5
0.25
1.25
0.5
All dimensions in mm
Tolerances:
Case ±0.5
Pin pitch ± 0.35
Pin diameter ±0.05
Life Support Policy: HY-LINE does not
authorize the use of any of its products
for use in life support devices or
systems without the express written
approval of an officer of the Company.
Life support systems are devices which
support or sustain life, and whose
failure to perform, when properly used
in accordance with instructions for use
provided in the labeling, can be
reasonably expected to result in
significant injury to the user.
Rev: 09.10 f
Pin connections
Pin
1
2
4
5
6
7
Standard
Single
Dual
+V Input
+V Input
-V Input
-V Input
-V Output
-V Output
Omitted
Common
+V Output
+V Output
Omitted
Omitted
3 kVDC Isolation
Single
Dual
+V Input
+V Input
-V Input
-V Input
Omitted
Omitted
-V Output
-V Output
Omitted
Common
+V Output
+V Output
Page 3 of 3
Deutschland:
Inselkammerstraße 10
D-82008 Unterhaching
Tel.: 089 614 503-10
E-Mail: [email protected]
Schweiz:
Gründenstrasse 82
CH-8247 Flurlingen
Tel.: 052 647 42 00
E-Mail: [email protected]
Similar pages