Download

2W DC-DC Converter P2A-Series
●
●
●
●
4 Pin SIL
Low ripple and noise
Up to 3000 VDC isolation
MTBF > 1.12 Mio. hours
Model selection guide
Type
P2A053R3S
P2A0505S
P2A057R2S
P2A0509S
P2A0512S
P2A0515S
P2A0518S
P2A0524S
P2A123R3S
P2A1205S
P2A127R2S
P2A1209S
P2A1212S
P2A1215S
P2A1218S
P2A1224S
P2A153R3S
P2A1505S
P2A157R2S
P2A1509S
P2A1512S
P2A1515S
P2A1518S
P2A1524S
P2A243R3S
P2A2405S
P2A247R2S
P2A2409S
P2A2412S
P2A2415S
P2A2418S
P2A2424S
P2A483R3S
P2A4805S
P2A487R2S
P2A4809S
P2A4812S
P2A4815S
P2A4818S
P2A4848S
Input voltage
range
[VDC]
4.5…5.5
4.5…5.5
4.5…5.5
4.5…5.5
4.5…5.5
4.5…5.5
4.5…5.5
4.5…5.5
10.8…13.2
10.8…13.2
10.8…13.2
10.8…13.2
10.8…13.2
10.8…13.2
10.8…13.2
10.8…13.2
10.8…13.2
13,5...16,5
13,5...16,5
13,5...16,5
13,5...16,5
13,5...16,5
13,5...16,5
13,5...16,5
21.6…26.4
21.6…26.4
21.6…26.4
21.6…26.4
21.6…26.4
21.6…26.4
21.6…26.4
21.6…26.4
43.2...52.8
43.2...52.8
43.2...52.8
43.2...52.8
43.2...52.8
43.2...52.8
43.2...52.8
43.2...52.8
Input current
without load
full load
(mA)
(mA)
25
340
25
495
35
500
25
480
30
490
30
470
35
470
30
465
20
150
20
205
15
210
15
195
15
195
15
195
18
195
25
195
15
120
15
170
15
160
15
165
15
160
13
160
15
160
17
160
7
70
8
100
10
100
6
100
8
100
8
100
8
100
8
95
5
40
5
55
5
50
5
50
5
50
5
50
5
50
5
50
Output voltage
Output current
[VDC]
3.3
5.0
7.2
9.0
12.0
15.0
18.0
24.0
3.3
5.0
7.2
9.0
12.0
15.0
18.0
24.0
3.3
5.0
7.2
9.0
12.0
15.0
18.0
24.0
3.3
5.0
7.2
9.0
12.0
15.0
18.0
24.0
3.3
5.0
7.2
9.0
12.0
15.0
18.0
24.0
[mA]
400
400
280
222
167
133
111
83
400
400
280
222
167
133
111
83
400
400
280
222
167
133
111
83
400
400
280
222
167
133
111
83
400
400
280
222
167
133
111
83
Efficiency
typ.
[%]
78
81
80
83
84
85
85
86
72
81
80
85
85
85
85
85
76
81
83
80
84
86
85
84
81
83
82
85
86
86
86
88
74
79
83
83
81
82
83
86
Capacitive
load (note 2)
[µF]
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
Suffix: “H” for 3 kV isolation voltage
Page 1 of 3
Deutschland:
Inselkammerstraße 10
D-82008 Unterhaching
Tel.: 089 614 503-10
E-Mail: [email protected]
Schweiz:
Gründenstrasse 82
CH-8247 Flurlingen
Tel.: 052 647 42 00
E-Mail: [email protected]
2W DC-DC Converter P2A-Series
Specifications
Input
Voltage range
Filter
Reflected ripple current
Isolation:
Rated voltage,
tested for 3 sec
Resistance
Capacitance
Output
Voltage accuracy
Ripple and noise
(see note 1)
Short circuit protection
Line voltage behaviour
Load voltage behaviour @
load change 20..100 %
Temperature coefficient
EMC
Radiated emissions
Conducted Emission
(see note 6)
ESD
RS
EFT (see note 7)
Surge (see note 7)
CS
PFMF
General
Switching frequency
Reliability calculated MTBF
(MIL-HDBK-217F)
Safety (desinget to meet)
Environmental
Operating temperatur
(ambient)
Case temperature
Storage temperature
Derating
Humidity
Cooling
Physical
Dimensions
Weight
Case material
± 10 %
Capacitors
20 mA p-p (see note 3)
1000 VDC, standard
3000 VDC suffix H
9
10 Ω
60 pF, typ.
± 3 %, max.
150 mVp-p, max.
for 2 sec.
± 1.2 % / 1 % of delta Vin
± 10 %
± 20 % only at 3.3 V types
± 0.02 % / °C
EN50022 class B
EN50022 class B
IEC61000-4-2 perf.-criteria A
IEC61000-4-3 perf-criteria A
IEC61000-4-4 perf-criteria A
IEC61000-4-5 perf-criteria A
IEC61000-4-6 perf-criteria A
IEC61000-4-8 perf-criteria A
Potting material
Absolute maximum ratings
Max. input voltage (<100ms)
5 V input types
12 V input types
15 V input types
24 V input types
48 V input types
Pin soldering temperature
1.5 mm distance from body
Dimensions
7.5
Pin
1
2
3
4
PHI-CON
P2A0505S
1
IEC 60950-1
-40 °C to +85 °C
100 °C, max.
-40 °C to +125 °C
None required
Up to 95 %, non condensing
Free-air convection
11.68 x 10.16 x 7.5 mm
1.8 g
non-conductive black plastic
(UL94V-0 rated)
Epoxy (UL94V-0 rated)
0~7V
0 ~ 15 V
0 ~ 18 V
0 ~ 28 V
0 ~ 54 V
260 °C max. for 10 sec
Pin connections
11.68
9.65
70 kHz, typ.
1.121 Mio. hours
2
3
Function
-V Input
+V Input
-V Output
+V Output
4
3.05
0.5
2.54
All dimensions in mm
Tolerance ±0.25 mm
0.5
2.0
0.25
0.5
1.
2.
3.
4.
5.
6.
7.
Ripple & noise measured with 20 MHz bandwidth.
Tested by minimal Vin and constant resistive load.
Measured input reflected ripple current with a simulated source inductance of 12 µH.
Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating.
Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications.
Input filter components are be required to help meet conducted emission class B, which application refer to the EMI Filter
of design & feature configuration.
An external filter capacitor is required if the module has to meet IEC61000-4-4.
Suggested filter capacitor Nippon - Chemicon KY series, 470 µF / 100V
Page 2 of 3
Deutschland:
Inselkammerstraße 10
D-82008 Unterhaching
Tel.: 089 614 503-10
E-Mail: [email protected]
Schweiz:
Gründenstrasse 82
CH-8247 Flurlingen
Tel.: 052 647 42 00
E-Mail: [email protected]
2W DC-DC Converter P2A-Series
EMI filter circuit
Input filter components (C1, L, C2, C3 ) are used to help
meet conducted emissions requirement for the module.
These components should be mounted as close
aspossible to the module; and all leads should be
minimized to decrease radiated noise.
Type
P1A05xxS
P1A12xxS
P1A15xxS
P1A24xxS
P1A48xxS
C1
ceramic
[µF]
2.2
2.2
2.2
2.2
10
L
[µH]
18
18
18
18
18
C2
ceramic
[µF]
2.2
2.2
C3
ceramic
[pF]
470
470
PHI-CON is a trademark of HY-LINE power components.
Only for professional use by professionals! Not for resale or distribution to the general public in any way! Read the instructions
carefully before using!
Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the
express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose
failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected
to result in significant injury to the user. Rev: 01.14 f
Page 3 of 3
Deutschland:
Inselkammerstraße 10
D-82008 Unterhaching
Tel.: 089 614 503-10
E-Mail: [email protected]
Schweiz:
Gründenstrasse 82
CH-8247 Flurlingen
Tel.: 052 647 42 00
E-Mail: [email protected]
Similar pages