30W DC-DC Converter P30A-Series ● ● ● ● ● ● Wide 2:1 input range 1500 VDC isolation Continuous short circuit protection Standard package 2” x 2” x 0.4” MTBF >1,12 Mhrs -40...+85°C operating temperature range Model guide Type Single output P30A1205S P30A127R2S P30A1209S P30A1212S P30A1215S P30A1218S P30A1224S P30A243R3S P30A2405S P30A247R2S P30A2409S P30A2412S P30A2415S P30A2418S P30A2424S P30A483R3S P30A4805S P30A487R2S P30A4809S P30A4812S P30A4815S P30A4818S P30A4824S Dual output P30A123R3D P30A1205D P30A127R2D P30A1209D P30A1212D P30A1215D P30A1218D P30A1224D P30A243R3D P30A2405D P30A247R2D P30A2409D P30A2412D P30A2415D P30A2418D P30A2424D P30A483R3D P30A4805D P30A487R2D P30A4809D P30A4812D P30A4815D P30A4818D P30A4824D Input voltage range [VDC] Input current no load full load [mA] [mA] Output voltage Output current Efficiency typ. [VDC] [mA] [%] Capacitive load max. [µF] 9...18 9...18 9...18 9...18 9...18 9...18 9...18 18...36 18...36 18...36 18...36 18...36 18...36 18...36 18...36 36...72 36...72 36...72 36...72 36...72 36...72 36...72 36...72 30 30 30 30 30 30 30 25 25 25 25 25 35 35 35 25 25 25 25 25 25 25 30 3048 3012 2976 2976 2941 2941 2941 1031 1488 1488 1436 1436 1436 1436 1436 522 753 744 744 726 710 710 710 5.0 7.2 9.0 12.0 15.0 18.0 24.0 3.3 5.0 7.2 9.0 12.0 15.0 18.0 24.0 3.3 5.0 7.2 9.0 12.0 15.0 18.0 24.0 6000 4166 3333 2500 2000 1666 1250 6000 6000 4166 3333 2500 2000 1666 1250 6000 6000 4166 3333 2500 2000 1666 1250 82 83 84 84 85 85 85 80 84 84 87 87 87 87 87 79 83 84 84 86 88 88 88 3300 3300 2200 1000 1000 680 680 3300 3300 3300 2200 1000 1000 680 680 3300 3300 3300 2200 1000 1000 680 680 9...18 9...18 9...18 9...18 9...18 9...18 9...18 9...18 18...36 18...36 18...36 18...36 18...36 18...36 18...36 18...36 36...72 36...72 36...72 36...72 36...72 36...72 36...72 36...72 25 25 25 25 25 35 35 35 25 25 25 25 25 25 25 30 20 20 20 20 20 20 20 20 2115 3048 3012 2976 2976 2941 2941 2941 1057 1488 1488 1470 1470 1436 1436 1436 515 735 735 735 718 710 710 710 ±3.3 ±5.0 ±7.2 ±9.0 ±12.0 ±15.0 ±18.0 ±24.0 ±3.3 ±5.0 ±7.2 ±9.0 ±12.0 ±15.0 ±18.0 ±24.0 ±3.3 ±5.0 ±7.2 ±9.0 ±12.0 ±15.0 ±18.0 ±24.0 ±3000 ±3000 ±2083 ±1666 ±1250 ±1000 ±833 ±625 ±3000 ±3000 ±2083 ±1666 ±1250 ±1000 ±833 ±625 ±3000 ±3000 ±2083 ±1666 ±1250 ±1000 ±833 ±625 78 82 83 84 84 85 85 85 78 84 84 85 85 87 87 87 80 85 85 85 87 88 88 88 2 x 2200 2 x 2200 2 x 1000 2 x 1000 2 x 1000 2 x 470 2 x 330 2 x 220 2 x 2200 2 x 2200 2 x 1000 2 x 1000 2 x 1000 2 x 470 2 x 330 2 x 220 2 x 2200 2 x 2200 2 x 1000 2 x 1000 2 x 1000 2 x 470 2 x 330 2 x 220 Page 1 of 3 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 30W DC-DC Converter P30A-Series Specifications Input Start up time Filter Isolation: Rated voltage, input to output Rated voltage, input or output to case Resistance Capacitance Output Voltage accuracy Voltage balance (dual outputs) Ripple and noise (at 20 MHz BW) Short circuit protection Over load protection Short circuit restart Line voltage regulation Load regulation, single outp. type Load regulation, dual outp. type Temperature coefficient General Switching frequency Safety standard Reliability Calculated MBTF Environmental Operating ambient temperature Case temperature Storage temperature Derating Humidity 20 mS, typ. Capacitors 1500 VDC, 3s tested 1000 VDC 109 Ω 1000 pF, typ. ±1% ±1% 100 mVp-p Indefinite (Automatic recovery) 140 %, typ. Automatic ± 0.5 % ± 0.5% @ 0%...100% load ± 0.5% @ 10%...100% load ± 0.02% / °C Cooling Physical Dimensions Weight Case material Potting Material Absolute maximum ratings Vin 12 V models Vin 24 V models Vin 48 V models Pin soldering temperature distance 1.5 mm from body 125 kHz, typ. IEC 60950-1 1.12 Mio. h -40 °C to 85 °C see derating 100 °C, max. -40 °C to 125 °C None required Up to 95%, non-condensing Free-air convection 50.80 x 50.80 x 10.16 mm 60 g Nickel-coated brass Epoxy UL94V-0 rated 25 VDC max. for 0.1 s max. 50 VDC max. for 0.1 s max. 100 VDC max. for 0.1 s max. 260°C for 10sec Efficiency vias load change Page 2 of 3 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 30W DC-DC Converter P30A-Series Dimensions Pin connections Pin Single output 1 +V input 2 -V input 3 +V output 4 Omitted 5 -V output Dual output +V input -V input +V output Common -V output Output ripple and noise reduction 1. 2. 3. 4. 5. 6. Ripple and Noise measured with 20 MHz bandwidth Tested by minimal Vin and constant resistive load. Measured Input reflected ripple current with a simulated source inductance of 12 µH. Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. For reduce converter’s ripple and noise, it is recommended to add a 4.7..100 μF(2 x 4.7..68 μF for dual output) capacitor on output. For EMI performance improvement, it is recommended to add a 12μH inductor and a 10..100 μF capacitor in input end. PHI-CON is a trademark of HY-LINE Power Components. Only for professional use by professionals! Not for resale or distribution to the general public in any way! Read the instructions for use carefully before using! Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 04.13 f Page 3 of 3 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected]