Document 1127 Z Axis RFID Coil PA6512-AE This part is optimized for use for the Z axis in Near Field Communications systems. Evaluation was done using the STMicroelectronics CR95HF NFC Transceiver Reference board with the PA6512 connected to the STMicroelectronics M24LRxxE Dynamic NFC/RFID Tag. The PA6512-AE requires 85% less board space (123 mm2 vs. 800 mm2) compared with antennas designed for a PCB, yet still has approximately 50% of the read distance. Read DCRInductance max6 at 13.56 MHz Part Inductance2 distance3 1 number (µH) (inches/mm)(Ohms) (µH) 1.15 / 29,30.028 4.6 1. When ordering, please specify packaging code: PA6512-AED Packaging:D=13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance measured at 100 kHz, using an Agilent/HP 4284A impedance analyzer or equivalent. 3. Read distance measured using the ST Microelectronics CR95HF RF transceiver demo board. 4. DCR measured using a Keithley 580 micro-ohmmeter or equivalent. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Terminations Gold over nickel over phos bronze Core material Ferrite Environmental RoHS compliant, halogen free Weight 1.1 g Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 1000 per 13″ reel Plastic tape: 24 mm wide, 0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. 0.370 max 9,40 X PA6512-AE_ 4.7 ±20% 0.510 max 12,95 0.125 ±0.010 3,18 ±0,254 Internal code 0.145 ±0.010 3,69 ±0,254 0.330 dia 8,38 0.205 max 5,21 0.100 2,54 0.115 2,92 0.110 2,79 0.100 2,54 Dimensions are in 0.405 10,29 0.300 7,62 Recommended Land Pattern inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 1127 Revised 09/23/13 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.