MYPMA01218RCF-CAB Non-isolated type FEATURES DESCRIPTION ■120W DC-DC converter(216W peak) ■Output Voltage:12V ■Low ripple and Low surge output. ■Input Voltage:36V-75V ■Working Temperature -20 - +85℃ ■High Efficiency up to 95% ■Compact Size 86.5x122.4x35.4mm ■Small and Lightweight(160g) ■IP56 compliance ■Vibration-proof case design ■Over Temperature Protection ■Built-in Over-current and short circuit protection circuit ■RoHS Compliant MYPMA01218RCF-CAB is an ultra-efficient, non-isolated DC-DC converter providing 216W power at 12V output. The small and lightweight converter is packaged in a plastic case conforming to IP56 standard. Originally designed for lighting application on the E-motorcycle, E-scooter, E-tricycle and E-super small car using non-automotive grade components, the converter is suitable for a wide variety of industrial and commercial applications. Connection Diagram Vout12 VIN A Vr V A V RL MYPMA01218RCF-CAB VIN GND (Input) A V Vr RL GND (Output) ： Digital Multi meter HP34401A equivalent (Agilent Technologies) ： Ripple Voltmeter RM－101 equivalent (Keisoku Giken ) ： Electronic Load Device ELL－355 equivalent (Keisoku Giken) ： DC Power Supply HP6675A equivalent ( Agilent Technologies) GND terminals are connected inside of DC-DC converter. However, please make sure that they are to be connected outside in order to prevent DC-DC converter from malfunction by noise. This information is subject to change without notice. Please contact our sales or product engineers to confirm the latest before purchasing. www.murata.co.jp P1/6 March 2, 2016 MYPMA01218RCF-CAB Non-isolated type Performance Specifications Summary Output Input Rlpple (mVp-p) Iout(Amps)** Model Number Vout (Volts) (Min) (Max) MYPMA01218RCF-CAB 12 1 10 Regulation (Max)** (Peak) Power (Watts) (Typ.) Line 18 120 150 ±5% Efficiency Load Vin Nom. (Volts) Range ** (Volts) Min. ** Typ. ** ±5% 48, 60 36-75 90 95 @Ta=25℃ Functional Specifications Environmental Input Input Voltage Range Isolation Start-Up Voltage Undervoltage Shutdown Overvoltage Shutdown Internal Input Filter Type Reverse Polarity Protection Recommended External Fuse Shutdown Mode Remote ON/Off Control See performance Specification Not isolated. Input and output Commons are internally connected 29.9Vdc 27.3Vdc None Capacitive None, install external fuse. 20A UVLO None Output Output Voltage** Ripple/Noise Line/Load Regulation DC Load Output Current Current Limit Inception Efficiency Short Circuit Protection Protection Method Short Circuit Duration See Performance Specification See Performance Specification See Performance Specification See Performance Specification 20A See Performance Specification Hiccup auto-recovery upon overload removal. Continuous, no damage(output shorted to ground). Over Temperature Protection Protective Method Over Temperature Duration Pre-bias Startup Estimated life Expectancy for Electrolytic Capacitor (Note 1) Operating Temperature Range with de-rating Storage Temperature Range Operating Humidity Range Storage Humidity Range Thermal Protection/Shutdown 4 years or more -20 to +85℃ -30 to +85℃ +20 to +95% +10 to +90% +140°C Physical Outline Dimensions Tightening torque Weight Vibration Shock Safety Standard UL60950/IEC 60950 International Protection Code IEC60529 See Mechanical Specifications 1.51Nm max. for each M5 screw 160g 10G at 10-2000Hz,4Hrs ×3 axis 40G at 100 bumps/6msec ×3 axis No registered Number.. However the enclosure is made from UL94V-0 equivalent materials. IP-56, exclude connector. Specification Note: (1)Rated load, ambient air temperature of 65°C. Surface temperature of a maximum of 95°C of the metal plate. 3 hours in operation per one day Autorecovery upon over temperature removal. Continuous, no damage Converter will start up if the external output voltage is less than Vnominal. Dynamic Characteristics Start Up Time (Vin on to Vout regulated or On/Off to Vout) Switching Frequency < 100msecs. 102kHz Reliability test Specifications Reliability Test High temperature load test High temperature high humidity load test ESD test Temperature cycling test Expose 100hrs in +65℃±3℃ with 48Vin. Expose 100hrs in +65℃±3℃/90%RH with 10A load and 48Vin. Expose condition A(r=1500Ω, C=100pF) on EIAJ ED-4701 method C-111. Expose 100 cycles in the following sequence..-40℃±3℃/30min->, Room temperature(+25℃)/10sec->+85℃±3℃/30min->Room temperature(+25℃)/10sec. After above test, hold in the room temperature(+25℃) for 24hrs, then measure above parameters indicated (**) in the above specification. This information is subject to change without notice. Please contact our sales or product engineers to confirm the latest before purchasing. www.murata.co.jp P2/6 March 2, 2016 MYPMA01218RCF-CAB Non-isolated type Typical Performance Data Efficiency vs. Line Voltage and Load Current @Ta=+25℃ Maximum Current Temperature De-rating at Sea Level Ripple and Noise (Vin = 36V, Iout = 10A,Scope Bandwidth = 20MHz) Trace 1 = Vout 100mV/div ,Trace 2 = Vin 500mV/div Turn On Delay (Vin = 36V, Iout = 10A,) Trace1 = Vout 5V/div , Trace 2 = Vin 50V/div Ripple and Noise (Vin = 48V, Iout = 10A,Scope Bandwidth = 20MHz) Trace 1 = Vout 100mV/div ,Trace 2 = Vin 500mV/div Turn On Delay (Vin = 48V, Iout = 10A,) Trace1 = Vout 5V/div, Trace 2 = Vin 50V/div This information is subject to change without notice. Please contact our sales or product engineers to confirm the latest before purchasing. www.murata.co.jp P3/6 March 2, 2016 MYPMA01218RCF-CAB Non-isolated type Typical Performance Data Ripple and Noise (Vin = 60V, Iout = 10A,Scope Bandwidth = 20MHz) Trace 1 = Vout 100mV/div ,Trace 2 = Vin 500mV/div Turn On Delay (Vin = 60V, Iout = 10A,) Trace1 = Vout 5V/div, Trace 2 = Vin 50V/div Ripple and Noise (Vin = 75V, Iout = 10A,Scope Bandwidth = 20MHz) Trace 1 = Vout 100mV/div ,Trace 2 = Vin 500mV/div Turn On Delay (Vin = 75V, Iout = 10A,) Trace1 = Vout 5V/div, Trace 2 = Vin 50V/div This information is subject to change without notice. Please contact our sales or product engineers to confirm the latest before purchasing. www.murata.co.jp P4/6 March 2, 2016 MYPMA01218RCF-CAB Non-isolated type Mechanical Specifications 86.5±0.5 72±0.5 23.78±0.5 74±0.5 φ5.5 VLP-06V-1 (JST) 3 2 1 6 5 4 MURATA □□□ □□□ MYPMA01218RCF-CAB Recommended female connector : VLR-06V (JST) (35) 122.36±0.5 35.35±0.5 Input/output Connections P72 Pad 1 2 3 4 5 6 Function N.C. N.C. Vout12 Vin GND(Input) GND(Output) Wire Color Orange Red Black Blue ・ The connector of the converter is not waterproof. ・ Proper precautions should be taken to keep the converter water and dust free, to avoid a short-circuit. ・ Frame should be assembled using M5 screws, with a maximum torque of 1.51Nm. ・ Maximum allowable temperature on metal plate is 95°C. ・ Do not expose this product to direct sunlight. Packaging Specification Item Specification Packaging form typical classification Box Dimensions of packaging form H D W = 540 ( mm ) D = 355 ( mm ) H = 255 ( mm ) W The number of products in a packaging form 35 ( pcs. ) Remark Minimum order quantity is 105pcs. (3boxes * 35pcs/box. = 105pcs.) This information is subject to change without notice. Please contact our sales or product engineers to confirm the latest before purchasing. www.murata.co.jp P5/6 March 2, 2016 MYPMA01218RCF-CAB Non-isolated type Functional Specifications Please contact Murata Sales before using this product for the applications listed below. These are applications that require very high reliability of prevention of defects which might directly cause damage to third party’s life, body, or property. 1. Aircraft equipment 2. Aerospace equipment 3. Undersea equipment 4. Power plant control equipment 5. Medical equipment 6. Transportation equipment (cars, buses, trucks, trains, ships, etc.) 7. Traffic signal equipment 8. Disaster prevention /crime prevention equipment 9. Data-processing equipment 10. Application of similar complexity and /or reliability Storage Please store this product in an environment where the temperature/humidity is stable in the range 0 to 40°C/10 to 75%RH and no direct sunlight. Use the product within 6 months after delivery. Please avoid storage conditions where humidity and temperature change rapidly, as that may cause condensation on the product, which might degrade the quality of the product. This product may rust after a long time (more than 1 year) storage. Please do not store the product environments that are dusty, in direct exposure to sea breeze, or in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on). Operational environment and operational conditions Operational environment This product is not chemical-proof or rust-proof. In order to prevent this product from leakage of electricity and/or abnormal temperature increase, do not use the product under the following circumstances: (1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on). (2) in a dusty place. (3) in a place exposed to direct sunlight. (4) in such a place where water splashes or in such a humid place where water condenses. (5) in a place exposed to sea breeze. (6) in any other places similar to the above (1)through (5). Operational conditions Please use the product within specified values (power supply, temperature, input, output and load condition etc.). Input voltage drops for line impedance, so please make sure that input voltage is within in specified values. If the product is used over the specified values, it may damage the product, reduce the quality, and even if the products can endure the condition for short time, it may cause degradation of the reliability. Note prior to use If you apply high static electricity, voltage higher than rated voltage or reverse voltage to the product, it may cause defects in the products or degrade the reliability. Please avoid the following items: 1. Over rating power supply, reverse power supply or not-enough connection of input voltage and 0V(DC)line 2. Electrostatic discharge by production line and/or operator 3. Electrified product by electrostatic induction • Do not subject product to excessive mechanical shock. If you drop the product on the floor it might cause a crack to the core of inductors and monolithic ceramic capacitors. • Also please pay attention to handling; the mounted parts can be dislodged if subjected to excessive force. • Input and output wiring cords should have slack so that they do not exert stress to the input/output connectors of the product. Subjecting the connectors to sustained stress may damage the product. Assembly Assemble the frame by using M5 screws, with a torque of 1.51Nm [reference only] Transportation If you transport the product, please pack it so that the package will not be damaged by mechanical vibration or mechanical shock, and please educate and guide the carrier to prevent rough handling. If you transport the products overseas (in particular, by sea), it is expected that the transportation environment will be the worst, so please pack the products in a package that is mechanically strong, vibration-resistant, and humidity-resistant. The packaging of the products that Murata sells in Japan may not be suitable overseas transport. Please consult Murata Sales if you plan to use the standard Murata packaging of the products for transport to overseas. Note 1. Please make sure that the product has been evaluated and confirmed against your specifications when it is mounted to your product. 2. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose, under the conditions and in the environment agreed upon between you and us. You are requested not to use our product deviating from such agreement. 3. We consider it not appropriate to include other terms and conditions for transaction warranty in product specifications, drawings or other technical documents. Therefore, if your technical documents as above include such terms and conditions as warranty clause, product liability clause, or intellectual property infringement liability clause, we will not be able to accept such terms and conditions unless they are based on the governmental regulation or they are stated in a separate contract agreement. This information is subject to change without notice. Please contact our sales or product engineers to confirm the latest before purchasing. www.murata.co.jp P6/6 March 2, 2016