Click Here to download this file: /data/power/MYSTM0051EEEFA.pdf

MYSTM0051EEEFA DATA Sheet
1
DC-DC Converter DATA Sheet
MYSTM0051EEEFA
1. Features
・Triple Output Voltage
・High efficiency , smll size and low profile.
・Surface Mount Type of Nom-insulated DC-DC Converter
・Fast Transient Response (Vout2 And Vout3)
・The short cicuit protection is built in.
2. Appearance, Dimensions
30.2±0.6 (ケース幅)
18
10
1
6.7 max.
b
20.9±0.4
MY S TM
0 0 5 1 E EEF A
MU R A T A
9
a
a a a a a a a
b
端子先端で
Top of pin
0.15 max.
a = 2.54
b = 4.74
【単位 : mm】
Unit
一般寸法公差 ±0.3 mm
【Unit:mm】
Tolerance
Tolerance
±0.3mm
公差は累積しません。
Toleranc
Toleranceisisnot
notaccumulated.
accumulated.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
2
Marking
(3) Lot No.
MYSTM0051EEEFA
MURATA
□□□□□□
(4)Pin No.1 Side Marking
○
(1)Manufacturer Parts Number
(2) Manufacturer ID
※ Pin Number, Function
Pin No.
Symbol
Function
1
Vin1
Ch1 Voltage Input Terminal
2,3
Vin23
Ch2,3 Voltage Input Terminal
4,5,6,7
GND
GND Terminal
8,9
Vout2
Ch2 Voltage Output Terminal
10,11
Vout3
Ch3 Voltage Output Terminal
12
N.C
No Connection
13,14,15,16
GND
GND Terminal
3. Block Diagram
Vin1
(1)
Vout1
(17,18)
Control
Circuit
Vout2
(8,9)
Vin23
(2,3)
Control
Circuit
N.C
(12)
Vout3
(10,11)
Control
Circuit
GND
(4,5,6,7
14,15,16)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
3
4. Environmental Conditions
4.1. Operating Temperature Range -10°C ~ +70°C
4.2. Storage Temperature Range
-20°C ~ +85°C
4.3. Operating Humidity Range
10% ~ 85% (No dew deposit)
4.4. Storage Humidity Range
5% ~ 90% (No dew deposit)
5. Absolute Maximum Ratings
Item
Unit
Absolute Rating
Maximum Input Voltage
V
13.2
Remarks
※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to
this product.
If you apply any voltage over this limit the product characteristics will deteriorate or the product itself will
be destroyed.
Even though it may continue operating for a while after the over-voltage event, its life will likely be shortened
significantly. Reliability and life of the module may degrade similarly if the maximum operating voltage rating
is continuously exceeded. This product is designed to operate within the maximum operating voltage
rating specification.
6. Electrical Characteristics
6.1. Specific Characteristics (Ta=+25°C)
Test circuit is mentioned in section 9.
Value
Item
Input Voltage
Symbol
Condition
Unit
Min.
Typ.
Max.
10.8
12.0
13.2
4.825
5.000
5.175
3.184
3.300
3.416
Vout3
1.061
1.100
1.139
Iout1
0
-
1.5
0
-
1.5
0
-
1.5
-
87
-
-
30
-
-
30
-
-
20
-
Vin
-
Vout1
V
出力電圧
出力電流
Output Current
Vout2
Iout2
Vin=12.0V±10%
Vin=12.0V±10%
Iout3
Efficiency
Eff
Vin=12.0V
Iout1=1.5A , Iout2=1.5A , Iout3=1.5A
Vout1=5.0V , Vout2=3.3V , Vout3=1.1V
Vrip1
Output Ripple
Voltage
Vrip2
Vrip3
Vin=12.0V
Iout1=1.5A , Iout2=1.5A , Iout3=1.5A
Vout1=5.0V , Vout2=3.3V , Vout3=1.1V
BW=20MHz
A
%
mV(p-p )
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
4
※ Short Circuit Protection
If output is shorted to GND, DC-DC converter shall be operated in a hiccup mode.
After the short circuit event has cleared, the output is automatically brought back into regulation.
6.2. Output Current(Iout1,Iout2,Iout3) De-rating (Ta=-10~+70°C)
Output Current (A)
2.5
2.0
1.5
1.0
0.5
0.0
-10
0
10
20
30
40
50
60
70
80
Ta (℃)
7. Operation information
7.1
Starting sequence
Vin (12V)
Vout1 (5V)
Vout2 (3.3V)
Vout1 (1.1V)
7.2 Stop sequence
Vin (12V)
Vout1 (5V)
Vout2 (3.3V)
Vout1 (1.1V)
30ms min.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
5
8. Reliability
8.1. Humidity Test
Subjected to a temperature 40°C±2°C with 90~95% for 100 hours.
Return to room temperature (25°C) for 4 hours and measure. The initial values in item 6.1 should be
met. (JIS-C-0022)
8.2. Thermal Cycle Test
Subjected to 5 cycle of the following.
Placed in room temperature (25°C) for 2 hours and are measured.
The initial values in item 6.1 should be met.
Step
Condition
Time
1
-20°C±3°C
30 minutes
2
Room Temp.
10~15 minutes
3
+85°C±2°C
30 minutes
4
Room Temp.
10~15 minutes
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
6
9. Test Circuit
In the following test circuit, the initial values in item 6.1 should be met.
9.1. General Measure Circuit
MYSTM0051EEEFA
Iout1
Vout1
Vout1
A
V
Iin
Vr
RL
C4
A
Vin1
D1
Iout2
Vout2
Vout2
A
V
Vin23
Vr
C5
RL
C6
V
DCIN
Vin
A:
V
Vr
RL
+
+
C1
C2
Vout3
C3
Iout3
Vout3
A
V
GND
Vr
C7
: Digital Multi meter
HP34401A equivalent
( Agilent Technologies)
:Ripple Voltmeter
RM-101 equivalent
( Keisokugiken )
EUL-150αXL equivalent
( Fujitsu access )
HP6653A equivalent
( Agilent Technologies)
:Electronic Load Device
C8
RL
:
:DC Power Supply
D1
C1,C2
C3
C4~C8
: Schottky diode
Schottky barrier diode
: Low impedance electrolytic Capacitor 3300μF/16V
: Ceramic Capacitor 22μF/16V (GRM31CC81C226ME15L:Murata)
: Ceramic Capacitor 0.1μF/16V 22μF / 6.3V (GRM21BC80J226ME51L:Murata)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
7
9.2. Ripple Noise Test
L
L≦3cm
Ripple Voltmeter or Oscilloscope
Keisokugiken RM-101 equivalent
or Tektronix 460A equivalent
DC-DC
Converter
load
Terminating resistance
Keisokugiken TRC-50F equivalent
Output capacitor
Coaxial cable (1.5D-2V, L=1.5m)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
8
10. Packaging Specification
10.1. Packing form
These are packed in a tray. (SeeFig.10-1)
10.2. The number of products in pack specification form.
32pcs/tray
If the products have fraction, may not follow this specification.
10.3. Packaging form
These trays packed products are packaging in a corrugated box alternately.
200
9.2
A
32.0
B
B'
32.0
32.0
300
32.0
289.4
A-A'
32.0
32.0
32.0
38.0
A'
44.0
44.0
44.0
34.0
189.4
B-B'
Fig.10-1
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
9
11. Production factory
Kanazu Murata Mfg. Co., Ltd.
Wakura Murata Mfg. Co., Ltd.
Shenzhen Murata Mfg.Co.,Ltd
Murata Electronics(Thailand).Ltd.
12. Typical Characteristics Data
5.16
5.16
5.08
5.08
Vout1 [V]
Vout1 [V]
<Vin=10.8V~13.2V, Vout1=5.0V, Vout2=3.3V, Vout3=1.1V>
5.00
4.92
5.00
4.92
4.84
10.8
11.2
11.6
12.0
12.4
12.8
4.84
10.8
13.2
11.2
11.6
Vin [V]
Ta=-10℃
Vin
vs
12.4
12.8
13.2
Vin [V]
Ta=25℃
Ta=70℃
Vout1
(Iout1=0A)
Ta= -10℃
Fig.12-1b.
3.40
3.40
3.35
3.35
Vout2 [V]
Vout2 [V]
Fig.12-1a.
12.0
3.30
3.25
Vin
Ta=25℃
vs
Ta=70℃
Vout1
(Iout1=1.5A)
3.30
3.25
3.20
10.8
11.2
11.6
12.0
12.4
12.8
13.2
3.20
10.8
11.2
11.6
Vin [V]
Ta= -10℃
Fig.12-1c.
Vin
Ta=25℃
vs
Vout2
12.0
12.4
12.8
13.2
Vin [V]
Ta=70℃
(Iout2=0A)
Ta= -10℃
Fig.12-1d.
Vin
Ta=25℃
vs
Vout2
Ta=70℃
(Iout2=1.5A)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
1.12
1.12
1.11
1.11
Vout3 [V]
Vout3 [V]
10
1.10
1.09
1.10
1.09
1.08
10.8
11.2
11.6
12.0
12.4
12.8
1.08
10.8
13.2
11.2
11.6
Vin [V]
Ta= -10℃
Ta=25℃
Vin
vs
Ta=70℃
Vout3
(Iout3=0A)
Ta= -10℃
Fig.12-1f.
5.16
3.40
5.08
3.35
Vout2 [V]
Vout1 [V]
Fig.12-1e.
12.0
12.4
12.8
13.2
Vin [V]
5.00
4.92
Ta=25℃
Vin
vs
Ta=70℃
Vout3
(Iout3=1.5A)
3.30
3.25
4.84
3.20
0.0
0.5
1.0
1.5
0.0
0.5
Iout1 [A]
Ta= -10℃
Fig.12-2a.
Ta=25℃
Iout1
vs
1.0
1.5
Iout2 [A]
Ta=70℃
Vout1
(Vin=12V)
Ta= -10℃
Fig.12-2b.
Ta=25℃
Iout2
vs
Vout2
Ta=70℃
(Vin=12V)
1.12
Vout3 [V]
1.11
1.10
1.09
1.08
0.0
0.5
1.0
1.5
Iout3 [A]
Ta= -10℃
Fig.12-2c.
Iout3
Ta=25℃
vs
Vout3
Ta=70℃
(Vin=12V)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
100
100
80
80
Vrip2 [mVp-p]
Vrip1 [mVp-p]
11
60
40
20
0
60
40
20
0
0.0
0.5
1.0
1.5
0.0
0.5
1.0
Iout1 [A]
Ta= -10℃
Fig.12-3a.
Iout1
Iout2 [A]
Ta=25℃
vs
Vrip1
1.5
Ta=70℃
(Vin=12V)
Ta= -10℃
Fig.12-3b.
Ta=25℃
Iout2
vs
Vrip2
Ta=70℃
(Vin=12V
Vrip3 [mVp-p]
100
80
60
40
20
0
0.0
0.5
1.0
1.5
Iout3 [A]
Fig.12-5a.
Load Transient
Ta= -10℃
Ta=25℃Response
Ta=70℃
Iout3
vs
Vrip3
(Vin=12V)
100
100
90
90
Eff [%]
Eff [%]
Fig.12-3c.
80
70
80
70
60
60
0
20
40
60
80
100
0
20
40
Iout [%]
Fig.12-5c.
Load Transient Response
(Iout2=0→6A)
Ta= -10℃
Ta=25℃
Ta=70℃
Fig.12-4a.
Iout
vs
Eff
(Vin=10.8V)
60
80
100
Iout [%]
Fig.12-5d.
Load Transient Response
(Iout2=6→0A)
Ta= -10℃
Ta=25℃
Ta=70℃
Fig.12-4b.
Iout
vs
Eff
(Vin=12V)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
12
100
Eff [%]
90
80
70
60
0
20
40
60
80
100
Iout [%]
Ta= -10℃
Fig.12-4c.
Iout
Ta=25℃
vs
Eff
Ta=70℃
(Vin=13.2V)
(50μs/div)
(50μs/div)
Vout1 (100mV/div)
Vout1 (100mV/div)
Iout1 (1A/div)
Iout1 (1A/div)
Fig.12-5a.
Load Transient Response
(Iout1=0A→1.5A)
Fig.12-5b.
(50μs/div)
Load Transient Response
(Iout1=1.5A→0A)
(50μs/div)
Vout2 (50mV/div)
Vout2 (50mV/div)
Iout2 (1A/div)
Iout2 (1A/div)
Fig.12-5c.
Load Transient Response
(Iout2=0A→1.5A)
Fig.12-5d.
Load Transient Response
(Iout2=1.5A→0A)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
13
Fig.12-5e.
Fig.12-6a.
(50μs/div)
(50μs/div)
Vout3 (20mV/div)
Vout3 (20mV/div)
Iout3 (1A/div)
Iout3 (1A/div)
Load Transient Response
(Iout3=0A→1.5A)
Vin Start
Load Transient Response
(Iout3=1.5A→0A)
(5ms/div)
(5ms/div)
Vin (10V/div)
Vin (10V/div)
Vout1 (1V/div)
Vout1 (1V/div)
Vout2 (1V/div)
Vout2 (1V/div)
Vout3 (1V/div)
Vout3 (1V/div)
(Vin=12V,Iout=1.5A)
(10ms/div)
Vin (10V/div)
Fig.12-5f.
Vout1 (1V/div)
Fig.12-6b.
Vin Start
(2s/div)
Vin (10V/div)
Vout1 (1V/div)
Vout2 (1V/div)
Vout2 (1V/div)
Vout3 (1V/div)
Fig.12-7a.
Vin Stop
(Vin=12V,Iout=0A)
(Vin=12V,Iout=1.5A)
Vout3 (1V/div)
Fig.12-7b.
Vin Stop
(Vin=12V,Iout=0A)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
14
13. Mounting Condition
13. 1. Recommendable Solder Land Pattern
22.9
20.9
2.0
16.9
2.0
1.0
31.8
29.8
3.94
1pin
0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
3.94
1.0
Area prohibits wirings other than land.
There are wiring coppers or through-hole via at the bottom side of the DC-DC converter.
When you design your PCBs, please be careful not to short the circuit of the DC-DC converter or PCBs.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
15
13.2. Recommended Soldering Conditions
Method
:
Profile details
Soldering temperature
Soldering time (Over 250°C)
(Over 220°C)
Preheating time
:
:
:
:
Heating rate
Times
Infrared ray re-flow soldering
Case surface temperature 260°C Max.
20 seconds Max. (Case surface temperature)
30 ~ 75 seconds (Case surface temperature)
60 ~ 150 seconds (150 ~ 200 °C)
: 3ºC/ sec. Max., 217~245ºC
: 1 time
260℃Max.
250℃
Case surface temperature
20 (seconds max.)
Colling curve
2~3℃/s
220℃
200℃
150℃
30~75
(seconds)
60~150
(seconds)
Soldering time
※Do not vibrate for the products on reflow.
Please need to take care temperature control because mounted parts may come off if the product
are left under the high temperature.
Do not reflow DC-DC converter as follows, because DC-DC converter may fall down from a
substrate during reflowing.
Substrate
DC-DC Converter
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
16
14. Notice
14. 1. Both input-side and output side, please make the wiring loop between plus and minus as small as possible.
The influence of leakage inductance can be reduced.
14. 2. Please design the print pattern of the main circuit as wide and short as possible.
14. 3. Please do not use a connector or a socket for connection with your board of this product.
Electrical performance may be deteriorated the influence of contact resistance.
Please be sure to mount this product with solder.
14. 4. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that
may be caused by the abnormal function or the failure of our product.
14. 5. Inrush current protection is not a feature of this product.
14. 6. Please connect the input terminal with proper polarity. If you connect wrong polarity, the DC-DC
Converter may be broken. In the case of the DC-DC Converter is damaged, abnormal input current may
flow in, and abnormal overheat of the DC-DC Converter, or some damage of your products may occur.
Please use a diode and a fuse to as following figure.
fuse
diode
+
+
IN
OUT
-
-
+
Load
Rated Fuse Current:5A
※Please select diode and fuse after confirming the operation.
14. 7 Cleaning
Please do not wash this product.
14. 8 Storage
14.8.1. Please store the products in room where the temperature/humidity is stable and direct sunlight cannot
come in, and use the products within 6 months after delivery.
Avoid damp and heated places or such places where there are large temperature changes, because
water may condense on the products, the characteristics may be reduced in quality, and/or be
degraded in the solder-ability.
If you store the products for a long time (more than 1 year), use caution because the products may
be degraded in the solder-ability and/or rusty.
Please confirm solder-ability and characteristics for the products regularly.
14.8.2. Please do not store the products in the places such as:
in a dusty place, in a place exposed directly to sea breeze, in an atmosphere containing corrosive gas
(Cl2,NH3,SO2,NOX and so on).
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
17
14. 9. Operational Environment and Operational Conditions
14.9.1. Operational Environment
The products are not waterproof, chemical-proof or rustproof.
In order to prevent leakage of electricity and abnormal temperature increase of the products,
do not use the products under the following circumstances:
(1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water condenses
(5) in a place exposed to sea breeze
(6) in any other places similar to the above (1) through (5)
14.9.2. Operational Conditions
Please use the products within specified values (power supply, temperature, input, output and load
condition, and so on). Input voltage drop for line impedance, so please make sure that input voltage is
included in specified values.
If you use the products over the specified values, it may break the products, reduce the quality, and even
if the products can endure the condition for short time, it may cause degradation of the reliability.
14.9.3. Note prior to use
If you apply high static electricity, over rated voltage or reverse voltage to the products, it may cause
defects in the products or degrade the reliability.
Please avoid the following items:
(1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC)line
(2) electrostatic discharge by production line and/or operator
(3) electrified product by electrostatic induction
Do not give an excessive mechanical shock.
If you drop the products on the floor, etc., it may occur a crack to the core of inductors and monolithic
ceramic capacitors.
Do not give a strong shock such as a drop in handling.
14.10. Transportation
If you transport the products, please pack them so that the package will not be damaged by mechanical
vibration or mechanical shock, and please educate and guide a carrier to prevent rough handling.
If you transport the products to overseas (in particular, by sea), it is expected that the transportation
environment will be the worst, so please pack the products, in the package designed on the consideration
of mechanical strength, vibration-resistant and humidity-resistant.
The package of the products, which Murata sells in Japan, may not resist over sea transport.
Please consult us if you are to use the Murata package of the products sold in Japan for transport to
overseas.
!
Note
1. Murata recommends that customers ensure that the evaluation and testing of these devices are completed
with this product actually assembled on their product.
2. Please contact our main sales office or nearby sales office before using our products for the applications listed
below which require especially high reliability for the prevention of defects which might directly
cause damage to the third party’s life, body or property or this products for any other applications that
described in the above.
①Aircraft equipment
②Aerospace equipment
③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment (vehicles, trains, ships, etc.)
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
Note:
This DATA Sheet is indicated in Apr. 2011. About the written contents, since changing without a preliminary
announcement for improvement and supply are sometimes stopped, please confirm in case of ordering.
If written contents are unknown, please ask to our main sales office or nearby sales office.
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
MYSTM0051EEEFA DATA Sheet
18
!
Note
1. Murata recommends that customers ensure that the evaluation and testing of these devices are
completed with this product actually assembled on their product.
2. Please contact our main sales office or nearby sales office before using our products for the applications
listed below which require especially high reliability for the prevention of defects which might directly
cause damage to the third party’s life, body or property or this products for any other applications that
described in the above.
①Aircraft equipment
②Aerospace equipment
③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment (vehicles, trains, ships, etc.)
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
3. This data sheet is indicated in Mar 2014. About the written contents, since changing without a preliminary
announcement for improvement and supply are sometimes stopped, please confirm in case of ordering.
If written contents are unknown, please ask to our main sales office or nearby sales office.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.6.13
Similar pages