MYSTM0051EEEFA DATA Sheet 1 DC-DC Converter DATA Sheet MYSTM0051EEEFA 1. Features ・Triple Output Voltage ・High efficiency , smll size and low profile. ・Surface Mount Type of Nom-insulated DC-DC Converter ・Fast Transient Response (Vout2 And Vout3) ・The short cicuit protection is built in. 2. Appearance, Dimensions 30.2±0.6 （ケース幅） 18 10 1 6.7 max. b 20.9±0.4 MY S TM 0 0 5 1 E EEF A MU R A T A 9 a a a a a a a a b 端子先端で Top of pin 0.15 max. a = 2.54 b = 4.74 【単位 ： mm】 Unit 一般寸法公差 ±0.3 mm 【Unit：mm】 Tolerance Tolerance ±0.3mm 公差は累積しません。 Toleranc Toleranceisisnot notaccumulated. accumulated. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 2 Marking (3) Lot No. MYSTM0051EEEFA MURATA □□□□□□ (4)Pin No.1 Side Marking ○ (1)Manufacturer Parts Number (2) Manufacturer ID ※ Pin Number, Function Pin No. Symbol Function 1 Vin1 Ch1 Voltage Input Terminal 2,3 Vin23 Ch2,3 Voltage Input Terminal 4,5,6,7 GND GND Terminal 8,9 Vout2 Ch2 Voltage Output Terminal 10,11 Vout3 Ch3 Voltage Output Terminal 12 N.C No Connection 13,14,15,16 GND GND Terminal 3. Block Diagram Vin1 (1) Vout1 (17,18) Control Circuit Vout2 (8,9) Vin23 (2,3) Control Circuit N.C (12) Vout3 (10,11) Control Circuit GND （4,5,6,7 14,15,16） Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 3 4. Environmental Conditions 4.1. Operating Temperature Range -10°C ~ +70°C 4.2. Storage Temperature Range -20°C ~ +85°C 4.3. Operating Humidity Range 10% ~ 85% （No dew deposit） 4.4. Storage Humidity Range 5% ~ 90% （No dew deposit） 5. Absolute Maximum Ratings Item Unit Absolute Rating Maximum Input Voltage V 13.2 Remarks ※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to this product. If you apply any voltage over this limit the product characteristics will deteriorate or the product itself will be destroyed. Even though it may continue operating for a while after the over-voltage event, its life will likely be shortened significantly. Reliability and life of the module may degrade similarly if the maximum operating voltage rating is continuously exceeded. This product is designed to operate within the maximum operating voltage rating specification. 6. Electrical Characteristics 6.1. Specific Characteristics (Ta=+25°C) Test circuit is mentioned in section 9. Value Item Input Voltage Symbol Condition Unit Min. Typ. Max. 10.8 12.0 13.2 4.825 5.000 5.175 3.184 3.300 3.416 Vout3 1.061 1.100 1.139 Iout1 0 － 1.5 0 － 1.5 0 － 1.5 － 87 － － 30 － - 30 － － 20 － Vin － Vout1 V 出力電圧 出力電流 Output Current Vout2 Iout2 Vin=12.0V±10% Vin=12.0V±10% Iout3 Efficiency Eff Vin=12.0V Iout1=1.5A , Iout2=1.5A , Iout3=1.5A Vout1=5.0V , Vout2=3.3V , Vout3=1.1V Vrip1 Output Ripple Voltage Vrip2 Vrip3 Vin=12.0V Iout1=1.5A , Iout2=1.5A , Iout3=1.5A Vout1=5.0V , Vout2=3.3V , Vout3=1.1V BW=20MHz A % mV(p-p ) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 4 ※ Short Circuit Protection If output is shorted to GND, DC-DC converter shall be operated in a hiccup mode. After the short circuit event has cleared, the output is automatically brought back into regulation. 6.2. Output Current(Iout1,Iout2,Iout3) De-rating (Ta=-10～+70°C) Output Current (A) 2.5 2.0 1.5 1.0 0.5 0.0 -10 0 10 20 30 40 50 60 70 80 Ta (℃) 7. Operation information 7.1 Starting sequence Vin (12V) Vout1 (5V) Vout2 (3.3V) Vout1 (1.1V) 7.2 Stop sequence Vin (12V) Vout1 (5V) Vout2 (3.3V) Vout1 (1.1V) 30ms min. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 5 8. Reliability 8.1. Humidity Test Subjected to a temperature 40°C±2°C with 90～95% for 100 hours. Return to room temperature (25°C) for 4 hours and measure. The initial values in item 6.1 should be met. (JIS-C-0022) 8.2. Thermal Cycle Test Subjected to 5 cycle of the following. Placed in room temperature (25°C) for 2 hours and are measured. The initial values in item 6.1 should be met. Step Condition Time 1 -20°C±3°C 30 minutes 2 Room Temp. 10～15 minutes 3 +85°C±2°C 30 minutes 4 Room Temp. 10～15 minutes Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 6 9. Test Circuit In the following test circuit, the initial values in item 6.1 should be met. 9.1. General Measure Circuit MYSTM0051EEEFA Iout1 Vout1 Vout1 A Ｖ Iin Ｖr RL C4 A Vin1 D1 Iout2 Vout2 Vout2 A Ｖ Vin23 Ｖr C5 RL C6 Ｖ DCIN Vin A： V Vr RL + + C1 C2 Vout3 C3 Iout3 Vout3 A Ｖ GND Ｖr C7 : Digital Multi meter HP34401A equivalent ( Agilent Technologies) :Ripple Voltmeter RM－101 equivalent ( Keisokugiken ) EUL－150αXL equivalent ( Fujitsu access ) HP6653A equivalent ( Agilent Technologies) :Electronic Load Device C8 RL ： :DC Power Supply D1 C1,C2 C3 C4～C8 ： Schottky diode Schottky barrier diode ： Low impedance electrolytic Capacitor 3300μF/16V ： Ceramic Capacitor 22μF/16V (GRM31CC81C226ME15L：Murata) ： Ceramic Capacitor 0.1μF/16V 22μF / 6.3V （GRM21BC80J226ME51L：Murata） Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 7 9.2. Ripple Noise Test L L≦3cm Ripple Voltmeter or Oscilloscope Keisokugiken RM-101 equivalent or Tektronix 460A equivalent DC-DC Converter load Terminating resistance Keisokugiken TRC-50F equivalent Output capacitor Coaxial cable (1.5D-2V, L=1.5m) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 8 10. Packaging Specification 10.1. Packing form These are packed in a tray. (SeeFig.10-1) 10.2. The number of products in pack specification form. 32pcs/tray If the products have fraction, may not follow this specification. 10.3. Packaging form These trays packed products are packaging in a corrugated box alternately. 200 9.2 A 32.0 B B' 32.0 32.0 300 32.0 289.4 A-A' 32.0 32.0 32.0 38.0 A' 44.0 44.0 44.0 34.0 189.4 B-B' Fig.10-1 Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 9 11. Production factory Kanazu Murata Mfg. Co., Ltd. Wakura Murata Mfg. Co., Ltd. Shenzhen Murata Mfg.Co.,Ltd Murata Electronics(Thailand).Ltd. 12. Typical Characteristics Data 5.16 5.16 5.08 5.08 Vout1 [V] Vout1 [V] ＜Vin=10.8V~13.2V, Vout1=5.0V, Vout2=3.3V, Vout3=1.1V＞ 5.00 4.92 5.00 4.92 4.84 10.8 11.2 11.6 12.0 12.4 12.8 4.84 10.8 13.2 11.2 11.6 Vin [V] Ta=-10℃ Vin vs 12.4 12.8 13.2 Vin [V] Ta=25℃ Ta=70℃ Vout1 (Iout1=0A) Ta= -10℃ Fig.12-1b. 3.40 3.40 3.35 3.35 Vout2 [V] Vout2 [V] Fig.12-1a. 12.0 3.30 3.25 Vin Ta=25℃ vs Ta=70℃ Vout1 (Iout1=1.5A) 3.30 3.25 3.20 10.8 11.2 11.6 12.0 12.4 12.8 13.2 3.20 10.8 11.2 11.6 Vin [V] Ta= -10℃ Fig.12-1c. Vin Ta=25℃ vs Vout2 12.0 12.4 12.8 13.2 Vin [V] Ta=70℃ (Iout2=0A) Ta= -10℃ Fig.12-1d. Vin Ta=25℃ vs Vout2 Ta=70℃ (Iout2=1.5A) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 1.12 1.12 1.11 1.11 Vout3 [V] Vout3 [V] 10 1.10 1.09 1.10 1.09 1.08 10.8 11.2 11.6 12.0 12.4 12.8 1.08 10.8 13.2 11.2 11.6 Vin [V] Ta= -10℃ Ta=25℃ Vin vs Ta=70℃ Vout3 (Iout3=0A) Ta= -10℃ Fig.12-1f. 5.16 3.40 5.08 3.35 Vout2 [V] Vout1 [V] Fig.12-1e. 12.0 12.4 12.8 13.2 Vin [V] 5.00 4.92 Ta=25℃ Vin vs Ta=70℃ Vout3 (Iout3=1.5A) 3.30 3.25 4.84 3.20 0.0 0.5 1.0 1.5 0.0 0.5 Iout1 [A] Ta= -10℃ Fig.12-2a. Ta=25℃ Iout1 vs 1.0 1.5 Iout2 [A] Ta=70℃ Vout1 (Vin=12V) Ta= -10℃ Fig.12-2b. Ta=25℃ Iout2 vs Vout2 Ta=70℃ (Vin=12V) 1.12 Vout3 [V] 1.11 1.10 1.09 1.08 0.0 0.5 1.0 1.5 Iout3 [A] Ta= -10℃ Fig.12-2c. Iout3 Ta=25℃ vs Vout3 Ta=70℃ (Vin=12V) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 100 100 80 80 Vrip2 [mVp-p] Vrip1 [mVp-p] 11 60 40 20 0 60 40 20 0 0.0 0.5 1.0 1.5 0.0 0.5 1.0 Iout1 [A] Ta= -10℃ Fig.12-3a. Iout1 Iout2 [A] Ta=25℃ vs Vrip1 1.5 Ta=70℃ (Vin=12V) Ta= -10℃ Fig.12-3b. Ta=25℃ Iout2 vs Vrip2 Ta=70℃ (Vin=12V Vrip3 [mVp-p] 100 80 60 40 20 0 0.0 0.5 1.0 1.5 Iout3 [A] Fig.12-5a. Load Transient Ta= -10℃ Ta=25℃Response Ta=70℃ Iout3 vs Vrip3 (Vin=12V) 100 100 90 90 Eff [%] Eff [%] Fig.12-3c. 80 70 80 70 60 60 0 20 40 60 80 100 0 20 40 Iout [%] Fig.12-5c. Load Transient Response (Iout2=0→6A) Ta= -10℃ Ta=25℃ Ta=70℃ Fig.12-4a. Iout vs Eff (Vin=10.8V) 60 80 100 Iout [%] Fig.12-5d. Load Transient Response (Iout2=6→0A) Ta= -10℃ Ta=25℃ Ta=70℃ Fig.12-4b. Iout vs Eff (Vin=12V) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 12 100 Eff [%] 90 80 70 60 0 20 40 60 80 100 Iout [%] Ta= -10℃ Fig.12-4c. Iout Ta=25℃ vs Eff Ta=70℃ (Vin=13.2V) (50μs/div) (50μs/div) Vout1 (100mV/div) Vout1 (100mV/div) Iout1 (1A/div) Iout1 (1A/div) Fig.12-5a. Load Transient Response (Iout1=0A→1.5A) Fig.12-5b. (50μs/div) Load Transient Response (Iout1=1.5A→0A) (50μs/div) Vout2 (50mV/div) Vout2 (50mV/div) Iout2 (1A/div) Iout2 (1A/div) Fig.12-5c. Load Transient Response (Iout2=0A→1.5A) Fig.12-5d. Load Transient Response (Iout2=1.5A→0A) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 13 Fig.12-5e. Fig.12-6a. (50μs/div) (50μs/div) Vout3 (20mV/div) Vout3 (20mV/div) Iout3 (1A/div) Iout3 (1A/div) Load Transient Response (Iout3=0A→1.5A) Vin Start Load Transient Response (Iout3=1.5A→0A) (5ms/div) (5ms/div) Vin (10V/div) Vin (10V/div) Vout1 (1V/div) Vout1 (1V/div) Vout2 (1V/div) Vout2 (1V/div) Vout3 (1V/div) Vout3 (1V/div) (Vin=12V,Iout=1.5A) (10ms/div) Vin (10V/div) Fig.12-5f. Vout1 (1V/div) Fig.12-6b. Vin Start (2s/div) Vin (10V/div) Vout1 (1V/div) Vout2 (1V/div) Vout2 (1V/div) Vout3 (1V/div) Fig.12-7a. Vin Stop (Vin=12V,Iout=0A) (Vin=12V,Iout=1.5A) Vout3 (1V/div) Fig.12-7b. Vin Stop (Vin=12V,Iout=0A) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 14 13. Mounting Condition 13. 1. Recommendable Solder Land Pattern 22.9 20.9 2.0 16.9 2.0 1.0 31.8 29.8 3.94 1pin 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.94 1.0 Area prohibits wirings other than land. There are wiring coppers or through-hole via at the bottom side of the DC-DC converter. When you design your PCBs, please be careful not to short the circuit of the DC-DC converter or PCBs. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 15 13.2. Recommended Soldering Conditions Method : Profile details Soldering temperature Soldering time (Over 250°C) (Over 220°C) Preheating time : : : : Heating rate Times Infrared ray re-flow soldering Case surface temperature 260°C Max. 20 seconds Max. (Case surface temperature) 30 ~ 75 seconds (Case surface temperature) 60 ~ 150 seconds (150 ~ 200 °C) : 3ºC/ sec. Max., 217～245ºC : 1 time 260℃Max. 250℃ Case surface temperature 20 (seconds max.) Colling curve 2～3℃/s 220℃ 200℃ 150℃ 30～75 (seconds) 60～150 (seconds) Soldering time ※Do not vibrate for the products on reflow. Please need to take care temperature control because mounted parts may come off if the product are left under the high temperature. Do not reflow DC-DC converter as follows, because DC-DC converter may fall down from a substrate during reflowing. Substrate DC-DC Converter Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 16 14. Notice 14. 1. Both input-side and output side, please make the wiring loop between plus and minus as small as possible. The influence of leakage inductance can be reduced. 14. 2. Please design the print pattern of the main circuit as wide and short as possible. 14. 3. Please do not use a connector or a socket for connection with your board of this product. Electrical performance may be deteriorated the influence of contact resistance. Please be sure to mount this product with solder. 14. 4. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 14. 5. Inrush current protection is not a feature of this product. 14. 6. Please connect the input terminal with proper polarity. If you connect wrong polarity, the DC-DC Converter may be broken. In the case of the DC-DC Converter is damaged, abnormal input current may flow in, and abnormal overheat of the DC-DC Converter, or some damage of your products may occur. Please use a diode and a fuse to as following figure. fuse diode + + IN OUT - - + Load Rated Fuse Current：5A ※Please select diode and fuse after confirming the operation. 14. 7 Cleaning Please do not wash this product. 14. 8 Storage 14.8.1. Please store the products in room where the temperature/humidity is stable and direct sunlight cannot come in, and use the products within 6 months after delivery. Avoid damp and heated places or such places where there are large temperature changes, because water may condense on the products, the characteristics may be reduced in quality, and/or be degraded in the solder-ability. If you store the products for a long time (more than 1 year), use caution because the products may be degraded in the solder-ability and/or rusty. Please confirm solder-ability and characteristics for the products regularly. 14.8.2. Please do not store the products in the places such as: in a dusty place, in a place exposed directly to sea breeze, in an atmosphere containing corrosive gas (Cl2,NH3,SO2,NOX and so on). Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 17 14. 9. Operational Environment and Operational Conditions 14.9.1. Operational Environment The products are not waterproof, chemical-proof or rustproof. In order to prevent leakage of electricity and abnormal temperature increase of the products, do not use the products under the following circumstances: (1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on) (2) in a dusty place (3) in a place exposed to direct sunlight (4) in such a place where water splashes or in such a humid place where water condenses (5) in a place exposed to sea breeze (6) in any other places similar to the above (1) through (5) 14.9.2. Operational Conditions Please use the products within specified values (power supply, temperature, input, output and load condition, and so on). Input voltage drop for line impedance, so please make sure that input voltage is included in specified values. If you use the products over the specified values, it may break the products, reduce the quality, and even if the products can endure the condition for short time, it may cause degradation of the reliability. 14.9.3. Note prior to use If you apply high static electricity, over rated voltage or reverse voltage to the products, it may cause defects in the products or degrade the reliability. Please avoid the following items: (1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC)line (2) electrostatic discharge by production line and/or operator (3) electrified product by electrostatic induction Do not give an excessive mechanical shock. If you drop the products on the floor, etc., it may occur a crack to the core of inductors and monolithic ceramic capacitors. Do not give a strong shock such as a drop in handling. 14.10. Transportation If you transport the products, please pack them so that the package will not be damaged by mechanical vibration or mechanical shock, and please educate and guide a carrier to prevent rough handling. If you transport the products to overseas (in particular, by sea), it is expected that the transportation environment will be the worst, so please pack the products, in the package designed on the consideration of mechanical strength, vibration-resistant and humidity-resistant. The package of the products, which Murata sells in Japan, may not resist over sea transport. Please consult us if you are to use the Murata package of the products sold in Japan for transport to overseas. ! Note １. Murata recommends that customers ensure that the evaluation and testing of these devices are completed with this product actually assembled on their product. ２. Please contact our main sales office or nearby sales office before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party’s life, body or property or this products for any other applications that described in the above. ①Aircraft equipment ②Aerospace equipment ③Undersea equipment ④Power plant control equipment ⑤Medical equipment ⑥Transportation equipment (vehicles, trains, ships, etc.) ⑦Traffic signal equipment ⑧Disaster prevention /crime prevention equipment ⑨Data-processing equipment ⑩Application of similar complexity and/or reliability requirements to the applications listed in the above. Note: This DATA Sheet is indicated in Apr. 2011. About the written contents, since changing without a preliminary announcement for improvement and supply are sometimes stopped, please confirm in case of ordering. If written contents are unknown, please ask to our main sales office or nearby sales office. 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13 MYSTM0051EEEFA DATA Sheet 18 ! Note 1. Murata recommends that customers ensure that the evaluation and testing of these devices are completed with this product actually assembled on their product. 2. Please contact our main sales office or nearby sales office before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party’s life, body or property or this products for any other applications that described in the above. ①Aircraft equipment ②Aerospace equipment ③Undersea equipment ④Power plant control equipment ⑤Medical equipment ⑥Transportation equipment (vehicles, trains, ships, etc.) ⑦Traffic signal equipment ⑧Disaster prevention /crime prevention equipment ⑨Data-processing equipment ⑩Application of similar complexity and/or reliability requirements to the applications listed in the above. 3. This data sheet is indicated in Mar 2014. About the written contents, since changing without a preliminary announcement for improvement and supply are sometimes stopped, please confirm in case of ordering. If written contents are unknown, please ask to our main sales office or nearby sales office. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.6.13