3224

PL
IA
N
T
Features
LE
AD
F
RE
E
*R
oH
S
C
OM
n Surface Mount 4 mm Square / Multiturn
Cermet / Industrial / Sealed
n Halogen free** with date code 114
n Sealed to withstand board wash processing
n Pick and place centering design, with flush adjustment
Electrical Characteristics
3224 - 4 mm SMD Trimpot® Trimming Potentiometer
Product Dimensions
Ro VE LEA
HS RS D
C ION FRE
OM S E
PL AR IA E
NT
*
Standard Resistance Range
........................................... 10 to 2 megohm
(see standard resistance table)
Resistance Tolerance.....................±10 % std.
Absolute Min. Resistance......1 % or 2.0 ohms
(whichever is greater)
Contact Resistance Variation
.....................................1 % or 3 ohms max.
Resolution...........................Essentially Infinite
Insulation Resistance.........................500 vdc.
100 megohms min.
Dielectric Strength
Sea Level........................ 600 vac (1 minute)
Adjustment Angle...................... 12 turns nom.
Environmental Characteristics
Power Rating (300 volts max.)
85 °C..............................................0.25 watt
150 °C.................................................0 watt
Temperature Range.............-65 °C to +150 °C
Temperature Coefficient.............±100 ppm/°C
Seal Test........... 85 °C Fluorinert†/60 seconds
Humidity.................MIL-STD 202 Method 106
TRS ±2 %; IR 10 megohms
Vibration............... 20 G TRS±1 %; VRS ±1 %
Shock................. 100 G TRS ±1 %; VRS±1 %
Load Life..... @ 85 °C rated power 1,000 hours
TRS........3 ohms or 3 % (whichever is greater)
Rotational Cycling.......................... 200 cycles
TRS........3 ohms or 3 % (whichever is greater)
Thermal Shock................................... 5 cycles
TRS±2 %; VRS±1 %
Physical Characteristics
Mechanical Stop............................Wiper idles
Torque...................................... 180 g-cm max.
Weight.........................Approximately 0.01 oz.
Marking.......................... Manufacturer’s code,
resistance code and date code
Solderability........................ Per MIL-STD-202,
Method 208
Wiper.........................50 % (Actual TR) ±10 %
Flammability........................................UL94V0
Pushover Strength
J, G...................................................4.4 lbs.
W, X.......................................................1 lb.
Adjustment Tool....................................... H-91
How To Order
1.5
DIA.
(.060)
Tape and reel material meets Antistatic ANSI/
ESD 5541-2003 packaging standards.
2.4
(.095)
4.8
(.190)
2.0
3PLCS
(.079)
4.0
3.9
(.155)
2.3
(.090)
1.3
(.050)
0.5
(.020)
1.3
(.050)
1.2
(.047)
2.5
(.100)
1.5
DIA.
(.060)
2.6
(.103)
ADJUSTMENTSLOT
0.6
WIDE
(.022)
0.5
DEEP
X
(.020)
1.0
3PLCS.
(.040)
5.3
(.208)
0.7
(.028)
0.8
(.032)
2.9
(.114)
1.6
TYP.
(.061)
0.13
(.005)
1.3
3PLCS.
(.050)
0.5
TYP.
(.020)
5.2
(.205)
1.3
(.050)
0.5
(.020)
1.3
2.3
(.050) (.090)
2PLCS.
0.8
2PLCS
(.032)
1
3.5
(.139)
1.3
(.050)
0.9
(.034)
2PLCS.
0.2
(.007)
2.5
(.100)
5.1
(.200)
4.8
(.190)
2
1.2
(.047)
ADJUSTMENTSLOT
0.6
WIDE
(.022)
0.5 DEEP
X
(.020)
3.9
(.155)
1.0
3PLCS.
(.040)
5.3
(.208)
5.7
(.225)
1.3
2PLCS.
(.050)
2.0
(.079)
2.3
(.090)
3.9
(.152)
4.8
(.190)
2
3
6.0
(.236)
4.6
(.180)
ADJUSTMENTSLOT
0.6
WIDE
(.022)
0.5 DEEP
X
(.020)
2.0
(.079)
0.9
(.034)
2PLCS.
0.2
(.007)
5.1
(.200)
3.5
(.139)
1
1.0
(.039)
2PLCS.
1.14
(.045)
(.157)
1.3 2PLCS.
(.050)
0.8
(.032)
0.2
(.007)
2.4
(.095)
2.7
(.108)
2.3
(.090)
3.71
(.146)
0.5
DEEP
(.020)
2.0
(.079)
3
5.0
(.195)
4.6
(.180)
ADJUSTMENTSLOT
0.6
WIDE
(.022)
3
1
2
1.2
(.047)
4.8
(.190)
2.6
(.102)
X
1.5
DIA.
(.060)
1
2
1.2
(.047)
3224 J - 1 - 502 E
Model
Style
Standard or Modified
Product Indicator
-1= IR Reflow (standard)
†-2= Wave Solderable
-FW5= .070 ” ± .010 ” Shaft Extension
Resistance Code
Embossed Tape Designator
E = Style J, G: 500 pcs./7 ” reel (standard)
Style W: 250 pcs./7 ” reel (standard)
Style X: 200 pcs./7 ” reel (standard)
G = Style J, G: 1500 pcs./13 ” reel (standard)
Style W: 1000 pcs./13 ” reel (standard)
Style X: 850 pcs./13 ” reel (standard)
Blank = Style J, G: 1500 pcs./13 ” reel (FW5)
Style W, X: 600 pcs./13 ” reel (FW5)
Consult factory for other available options.
† -2 has a treated stainless steel shaft.
n 4mm design meets EIA/EIAJ/IPC/VECI SMD
standard trimmer footprint
n Low CRV - 1 %
n RoHS compliant* - see processing
information on RoHS compliant surface mount trimmers
n For trimmer applications/processing guidelines, click here
2.5
(.100)
0.2
(.007)
0.8
2PLCS.
(.032)
DIMENSIONS:
MM
(INCHES)
1.3
2PLCS.
(.050)
2.5
(.100)
1.9
TYP.
(.075)
0.2
(.007)
5.1
(.200)
2.0
(.079)
0.8
2PLCS.
(.032)
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Bourns follows the prevailing definition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br ) content is 900 ppm or less; (b) the Chlorine ( Cl ) content is 900 ppm or less;
and (c) the total Bromine (Br) and Chlorine ( Cl ) content is 1500 ppm or less.
†“Fluorinert” is a registered trademark of 3M Co.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications
and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Additional Features
n Top and side adjust styles
n J-hook, and gull-wing
3224 - 4 mm SMD Trimpot® Trimming Potentiometer
Packaging Specifications
W Style
J & G Styles
.04
MAX.
(.002)
4.5
MAX.
(.177)
X Style
6.09
MAX.
(.240)
.05
MAX.
(.002)
5.52±.05
(.217±.002)
5.55±.10 (J)
(.219±.004)
6.25±.10 (G)
(.246±.004)
1.5+.10/–.00
DIA.
(.059+.004/–.000)
4.00±.20
(.157±.008)
5.10±.10
(.201±.004)
2.00±.05
(.079±.002)
1.5+.10/–.00
DIA.
(.059+.004/–.000)
4.90±.10
(.193±.004)
4.00±.20
(.157±.008)
4.05±.12
(.159±.005)
8.00±.10
(.315±.004)
13.0±.51 DIA.
(.512±.020)
TAPE
W & X Style Reel
4.00
(.157)
TAPE
16.00±.30
(.630±.012)
2.67±.25
(.105±.010)
59.18±2.03
(2.330±.080)
12.4+2.01/-.000
(.488+.079/-.000)
16.4+1.81/-.000
(.646±.070/-.000)
REEL
REEL
*EmbossedTapeDesignator"E"
**EmbossedTapeDesignator"G"
(SeeHowToOrderchartforfurtherinformation.)
Covertapepeelstrength:MeetsEIAspecification481.
2.00
(.079)
16.0±0.30
(.630±.012)
CCW
WIPER
3
1
CLOCKWISE
12.00
(.472)
8.6
(.339)
TAPE
*EmbossedTapeDesignator"E"
**EmbossedTapeDesignator"G"
(SeeHowToOrderchartforfurtherinformation.)
ResistanceResistance
(Ohms)
Code
10
100
20
200
50
500
100
101
200
201
500
501
1,000
102
2,000
202
5,000
502
10,000
103
20,000
203
50,000
503
100,000
104
200,000
204
500,000
504
1,000,000
105
2,000,000
205
Popular distribution values listed in boldface.
Special resistances available.
Covertapepeelstrength:MeetsEIAspecification481.
2
6.70
(.264)
Standard Resistance Table
21.01±.79
DIA.
(.827±.031)
330.2±2.0
DIA.**
(13.00±.008)
1.5+.10/–.00
DIA.
(.059+.004/–.000)
1.75
(.069)
1.75±.10
(.069±.004)
178±2.0
DIA.*
(7.00±.008)
7.50
(.295)
12.00±.10
(.472±.004)
1.75±.10
(.069±.004)
1.78±.25 EQUALSPACED
3PLCS.
(.070±.010)
.35
MAX
(.014)
7.50±.05
(.295±.002)
2.00±.05
(.079±.002)
12.00±.30
(.472±.012)
6.35
(.250)
MAX.
CW
MM
DIMENSIONS:
(INCHES)
0.25 TOLERANCES: ±
EXCEPT WHERE NOTED
(.010)
REV. 05/16
“Trimpot” is a registered trademark of Bourns, Inc.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Similar pages