h 516

PL
IA
N
T
Features
CO
M
■ Compact, requires only 22.8 mm diameter panel space
*R
oH
S
■ No backlash
■ For use with precision potentiometers or other rotating devices up to 15 turns
■ Designed for use with plastic shafts
■ RoHS compliant*
H-516 Turns-Counting Dial
Mechanical and Physical Characteristics
Number of Turns ............................................................................................................................................................................. 0 to 15
Dial Divisions.............................................................................................................................................................................50 per turn
Readability - Over 10 Turns ............................................................................................................................................... 2 parts in 1000
Torque With Brake Engaged ......................................................................................................................5.0 N-cm (7.0 oz-in.) minimum
Markings..........................................................................................................................................................White on black background
Locking Brake ...................................................................................................................................................................................... Yes
Weight ...........................................................................................................................................................................7 grams (0.25 oz.)
Screws ............................................................................................................................ Slotted 4-40UN, 2 screws included, 120 º apart
Screw Tightening Torque...................................................................................................................... 16.94 N-cm (1.5 lbs.-in.) minimum
Shaft and Bushing Requirements
Shaft Diameter Requirements ....................................................................................................................................Refer to chart below
Shaft Extension Beyond Panel ................................................................................................................. 17.5 mm (0.6890 in.) minimum
22.5 mm (0.8858 in.) maximum
Bushing Extension Beyond Panel ............................................................................................................... 10 mm (0.3937 in.) maximum
H-516 MOUNTING INSTRUCTIONS
1. Drill 2.0 mm (.0787 in.) diameter anti-rotation pin hole on vertical
centerline, 9.5 mm (.375 in.) below center of potentiometer
mounting hole.
2. Mount potentiometer in panel with nut and lockwasher supplied
with the potentiometer.
3. Turn potentiometer shaft counterclockwise to obtain minimum
resistance or voltage ratio. This is not necessarily identical with
mechanical stop.
4. Loosen set screws in knob of dial. Set dial to “0.0” reading.
5. While holding outer ring of dial, position unit lightly against
panel. Tighten knob set screws to potentiometer shaft.
POTENTIOMETER
MOUNTING WASHER AND NUT
SUPPLIED WITH POTENTIOMETER
2 SET SCREWS
POTENTIOMETER
MOUNTING HOLE
9.5
(.374)
2.0
(.079)
Dimensional Drawings
0
30
0
50
40
17.0
MAX.
(.669)
1.4
(.055)
6
1.1
(.043)
70
9.5
(.374)
80
20
0
10
9
14.8
(.583)
TOLERANCES: EXCEPT WHERE NOTED
.51
.13
DECIMALS: .XX ±
.XXX ±
(.020)
(.005)
FRACTIONS: ±1/64
MM
DIMENSIONS:
(IN.)
10.3
TYP.
(.406)
22.8
(.898)
24.8
(.976)
How To Order
Part Number
Accepts Shaft
Diameter
Finish
H-516-3A
H-516-6A
H-516-6M
3.17 mm (.125)
6.35 mm (.250)
6 mm (.236)
Satin Chrome
Satin Chrome
Satin Chrome
REV. 11/12
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Asia-Pacific:
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116
Europe:
Tel: +41-41 768 5555
Fax: +41-41 768 5510
The Americas:
Tel: +1-951 781-5500
Fax: +1-951 781-5700
www.bourns.com