CAT10

PL
IA
N
T
Features
M
■ RoHS compliant*
■ Suitable for most types of soldering
processes
*R
oH
S
CO
■ 4 isolated resistors in an 0804 size
■ Paper tape on plastic reel for automatic
package
■ E24 series from 10 ohms to 1 megohm
■ Concave termination style
■ Resistance tolerance ±5 %
placement
Model CAT10 - Chip Resistor Array
Characteristics
Number of Elements............. 4 (isolated)
Power Rating per Resistor @ 70 °C
.............................................0.0625 W
Package Power Rating @ 70 °C
...............................................0.250 W
Operating Temperature Range
............................... -55 °C to +125 °C
Derated to 0 Load @..................+125 °C
Max. Working Voltage......................25 V
Max. Overload Voltage ....................50 V
Resistance Tolerance .................... ±5 %
Resistance Range/E24 Series
........................10 ohms to 1 megohm
plus Zero-ohm Jumper
T.C.R. ................................ ±250 ppm/°C
Packaging........... 10,000 pieces per reel
Product Dimensions
0.15
(.006)
0.20 ± 0.10
(.008 ± .004)
0.30 ± 0.15
(.012 ± .006)
1.0 ± 0.10
(.039 ±.004)
0.30 ± 0.15
(.012 ± .006)
0.20 ± 0.10
(.008 ± .004)
0.5
(.020)
2.0 ± 0.10
(.079 ± .004)
0.28 ± 0.10
(.011 ± .004)
0.40 ± 0.15
(.015 ± .006)
MM
(INCHES)
DIMENSIONS:
0.25
(.010)
Construction
Marking
Protective Glass Overcoat
Thick Film Resistive Element
Land Pattern
0.50
(0.020)
Conductor
0.25 ~ 0.30
(0.010 ~ 0.012)
Side Termination
0.45
(0.018)
1.45 ~ 1.85
(0.057 ~ 0.073)
High Purity Alumina Substrate
How To Order
CA T 10 - 103 J 4 LF
Type
• T = Concave
Model
• 10 = 0804 Package Size
Resistance Code
• <10 ohms: “R” represents decimal
point (example: 4R7 = 4.7 ohms)
• ≥10 ohms: First two digits are
significant, third digit represents
number of zeros to follow
(example: 474 = 470k ohms)
• 000 = Zero Ohm Jumper
Resistance Tolerance
• J = ±5 %
Derating Curve
Rated Load (%)
Chip Arrays
Isolated Circuit
70 °C
100
80
60
40
20
0
125 °C
ISOLATED CIRCUITS
8
7
R
1
-55
6
R
2
40 60 80 100 120 140 160
Ambient Temp. (°C)
Typical Part Marking
None on part. Label on reel will include
part number.
Resistors
• 4 = 4 pcs.
Terminations
• LF = Tin-plated (RoHS compliant)
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
5
R
3
R
4
Model CAT10 - Chip Resistor Array
Soldering Profile for RoHS Compliant Chip Resistors and Arrays
275
<1> Maximum of 20 seconds between
260 °C peak
+255 °C and +260 °C
<1> 255 °C
225
Temperature (°C)
220 °C
190 °C
60 - 90
seconds
175
Ramp Down
6 °C/second
150 °C
125
60 - 120 seconds
10 seconds minimum
75
Ramp Up
3 °C/second maximum
25
0
50
100
150
Time (seconds)
200
250
300
Packaging Dimensions
0.5
MAX.
(.020)
1.5 + 0.1 - 0
(.059 + .004 - 0)
2.0 ± 0.5
(.079 ± .020)
4.0 ± 0.1
(.158 ± .004)
13.0 ± 0.2
(.511 ± .008)
3.5 ± 0.05
(.138 ± .002)
1.0
MAX.
(.040)
2.3 ± 0.2
(.090 ± .008)
1.3 ± 0.2
(.051 ± .008)
60
(2.362)
8.0 ± 0.2
(.315 ± .008)
2.0 ± 0.05
(.079 ± .002)
180
(7.087)
DIMENSIONS:
21.0 ± 0.8
(.827 ± .031)
9.0 ± 0.3
(.354 ± .012)
11.4 ± 1.0
(.449 ± .040)
MM
(INCHES)
REV. 01/15
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Similar pages