2-18 GHz Radar Warning Receiver RR017 2-18 GHz Radar Warning Receiver The RR017 is designed for Radar Warning Receiver (RWR) applications where low cost and small size and are of prime importance, with filtering, amplification, detection and pulse parameter measurement being combined into one multifunction unit. Two amplitude measurement channels allow direction finding by amplitude comparison between adjacent antennas. A 20dB switched attenuator can be selected to allow amplitude measurement above –15dBm. An IFM, fed from one of the amplitude channels via an SPDT switch, performs 10 bits of frequency measurement on the selected input. Frequency resolution is nominally 25 MHz over a 2 to 18 GHz band. The RR017 is internally triggered and generates a full PDW giving the following data: Time of arrival, Pulse amplitude (from the two selected antennas), Pulse frequency and Pulse width. The standard data interface is USB2 with optional 50MHz clocked 16-bit parallel interface via a separate 37 way MDM connector. The small size eases the burden on UAV and AFV payloads in particular and the reduced power consumption renders a double benefit, as a smaller, lighter power supply is required.RF connections are made by SMA, DC power & USB2 uses a 25 way MDM, parallel data uses a separate 37 way MDM connector. External 50 MHz clock input can be selected to operate the time of arrival (TOA) counter (shared clock source for the parallel data output PDWs), hence the PDWs generated have fully correlated TOA digits. FEATURES APPLICATIONS • 2 to 18 GHz Frequency range • 25MHz Frequency resolution • • • • • 0.2dB Amplitude resolution • Pulse Descriptor Word Output • USB2 interface • Sensitivity –57dBm (or better) • Small form factor Affordable Radar Warning Receiver for AFV UAV Remote sensing • Air, sea and land platforms See restrictions on published datasheets at www.teledynedefence.co.uk/ Teledyne Defence, Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire | UK, BD17 7SW Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724 Email: [email protected] | Web: www.teledynedefence.co.uk RR017 | 022016 | Page 1 of 7 RR017 Electrical Specification: -20ºC to +85ºC Operating Frequency 2 to 18 GHz Out of Band Rejection DC to 1.5 GHz > 40 dB 20 to 26 GHz > 30 dB Operating Dynamic Range - Digital attenuator unselected -57 to -15 dBm Operating Dynamic Range - Digital attenuator selected -37 to +5 dBm Frequency Measurement Coding 1900 + 25xCode MHz Frequency Measurement Resolution 10 bits, 25 MHz nom Frequency Measurement Accuracy over operating dynamic range < 15 MHz RMS Minimum Pulse Width 75 nsec Frequency Measurement Triggering Internal Pulse Width & Time of Arrival Resolution 10 nsec Amplitude Measurement Resolution 9 bits, 0.2dB nom Amplitude Measurement Coding -70 + 0.2xCode dB Amplitude Measurement Accuracy Amplitude Measurement Tracking (Between video outputs at the Same Frequency, Temperature & Power level) Amplitude Measurement Tracking (at same frequency and temperature, with less than 20dB difference between 2 signals) Pulse on Pulse performance (Simultaneous signal >10dB) < 1.5 dB abs ave Amplitude measurement Video Coupling DC coupled Recovery Time 300 ns typical (500 nsec max) RF Input Switch Isolation (RF inputs 1-2) 30 dB min RF Input Switch Isolation (A-B) 70 dB min RF Input Switch Speed < 200 nsec < 0.5 dB abs ave < 1.5 dB abs ave Yes (see Note 1) RF Input Switch Control LVTTL Input Return Loss at Ports A1,A2,B1,B2 7 dB min (10 dB typ) Clock Input (req’d if using Parallel data port or TOA Correlation) 50 MHz Dimensions 160 x 160 x 20mm Weight 975 grams max Microwave Input Connectors SMA Female Power and control 25 & 37 way MDM Power Dissipation (operating) 20W max Power-up Time 2 seconds max Note 1: Minimum Frequency separation 100MHz, Leading edge separation > 500ns. See restrictions on published datasheets at www.teledynedefence.co.uk/ Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire | UK, BD17 7SW Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk RR017 | 022016 | Page 2 OF 7 BLOCK DIAGRAM OPERATING MODES LVTTL Control inputs are provided for direct control over the Input selection, the IFM measurement channel and the switched attenuator but in addition these functions may be controlled from the USB2 interface although this introduces a delay depending on the USB2 transfer time. An auto mode is available for the attenuator and the IFM channel to simplify the operation. The IFM can be directed to either of the measurement channels by the use of a TTL or USB command or alternatively using Auto Freq mode the internal thresholding determines the amplitude channel with the highest signal and route the IFM accordingly. This process functions on a pulse-by-pulse basis but reduces the minimum pulse width to 120ns due to the switching delay. The mode of operation can be specified from the USB2 interface and can be changed as required. The switched attenuator can be introduced, to both channels simultaneously, to enable the amplitude of high-level signals to be measured. This can be manually controlled or using Auto Atten mode the system detects on over- range measurement and switch the attenuation automatically. This process functions on a pulse-by-pulse basis but reduces the minimum pulse width to 200ns due to the switching delay. RR017 generates a PDW following the end of a received pulse, the maximum reported pulse width is 650us. Under CW conditions a PDW is generated after a pre-settable time, up to the maximum 650us with the CW Present flag set, PDWs continue to be generated with the same interval for the duration of the CW signal. PARALLEL DATA TRANSFER Each PDW is transferred in 8 clock cycles. The diagram illustrates a full transfer plus the start of the next transfer. Each Word block represents a portion of PDW data. See restrictions on published datasheets at www.teledynedefence.co.uk/ Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire | UK, BD17 7SW Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk RR017 | 022016 | Page 3 OF 7 RR017 Pulse Descriptor Word (PDW) Format Each PDW is transferred in 8 clock cycles. The diagram illustrates a full transfer plus the start of the next transfer. Each Word block represents a portion of PDW data. BIT DataWords (1/2) DataWords (3/4) DataWords (3/4) 0 Frequency 0 Pulse Width 0 Time of Arrival 0 1 Frequency 1 Pulse Width 1 Time of Arrival 1 2 Frequency 2 Pulse Width 2 Time of Arrival 2 3 Frequency 3 Pulse Width 3 Time of Arrival 3 4 Frequency 4 Pulse Width 4 Time of Arrival 4 5 Frequency 5 Pulse Width 5 Time of Arrival 5 6 Frequency 6 Pulse Width 6 Time of Arrival 6 7 Frequency 7 Pulse Width 7 Time of Arrival 7 8 Frequency 8 Pulse Width 8 Time of Arrival 8 9 Frequency 9 Pulse Width 9 Time of Arrival 9 10 Reserved Pulse Width 10 Time of Arrival 10 11 Reserved Pulse Width 11 Time of Arrival 11 12 Amplitude CHA 0 Pulse Width 12 Time of Arrival 12 13 Amplitude CHA 1 Pulse Width 13 Time of Arrival 13 14 Amplitude CHA 2 Pulse Width 14 Time of Arrival 14 15 Amplitude CHA 3 Pulse Width 15 Time of Arrival 15 0 Amplitude CHA 4 POP Present CHA Time of Arrival 16 1 Amplitude CHA 5 POP Present CHB Time of Arrival 17 2 Amplitude CHA 6 CW present Time of Arrival 18 3 Amplitude CHA 7 Ambiguity Bad Data Time of Arrival 19 4 Amplitude CHA 8 Threshold Bad Data Time of Arrival 20 5 Reserved Active IFM Channel Time of Arrival 21 6 Amplitude CHB 0 Ant Select 0 state Time of Arrival 22 7 Amplitude CHB 1 Ant Select 1 state Time of Arrival 23 8 Amplitude CHB 2 Re-Measure state Time of Arrival 24 9 Amplitude CHB 3 Auto Freq state Time of Arrival 25 10 Amplitude CHB 4 Auto Atten state Time of Arrival 26 11 Amplitude CHB 5 Reserved Time of Arrival 27 12 Amplitude CHB 6 Reserved Time of Arrival 28 13 Amplitude CHB 7 Reserved Time of Arrival 29 14 Amplitude CHB 8 Reserved Time of Arrival 30 15 Reserved Reserved Time of Arrival 31 See restrictions on published datasheets at www.teledynedefence.co.uk/ Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire | UK, BD17 7SW Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk RR017 | 022016 | Page 4 OF 7 RR017 PSU & Control Interface: 25-way MDM Pin Signal Direction Description 1 USBDM Bi-dir USB data minus 2 USB Vcc USB Power Power from host USB controller 3 Re-Measure Input – LVTTL2 Initiate manual measurement 4 IFM Channel Select Input – LVTTL2 IFM channel selection (A-B) 5 Antenna Select (0) Input – LVTTL2 Antenna channel A selection 6 CLK IN (-) Input – LVDS Master clock input 1 7 ~BLANKING Input – LVTTL2 Blanking signal input 8 Reserved1 Output – LVTTL Spare logic output 9 +5V Input Positive supply (2A max) 10 GND Ground Supply ground 11 +5V Input Positive supply (2A max) 12 GND Ground Supply ground 13 +3.3V Input Positive supply (1A max) 14 USBDP Bi-dir USB data plus 15 Reserved1 Input Spare logic input 16 DGND Ground Digital ground 17 Attenuator Input – LVTTL2 Attenuator control 18 Antenna Select (1) Input – LVTTL2 Antenna channel B selection 19 CLK IN (+) Input - LVDS Master clock input 1 20 Reserved1 Input Spare logic input 21 GND Ground Supply ground 22 -5V Input Negative supply (300mA typ) 23 GND Ground Supply ground 24 GND Ground Supply ground 25 +3.3V Input Positive supply (1A max) 1 This pin is reserved and must be left floating for normal unit operation. 2 LVTTL inputs are +5V tolerant. See restrictions on published datasheets at www.teledynedefence.co.uk/ Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire | UK, BD17 7SW Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk RR017 | 022016 | Page 5 OF 7 RR017 Parallel Data Interface: 37-way MDM Pin Signal Direction Description 1 DGND Ground Digital Ground 2 Data(15)+ Output -LVDS Parallel Data Word 3 Data(14)+ Output –LVDS Parallel Data Word 4 Data(13)+ Output –LVDS Parallel Data Word 5 Data(12)+ Output –LVDS Parallel Data Word 6 Data(11)+ Output –LVDS Parallel Data Word 7 Data(10)+ Output –LVDS Parallel Data Word 8 Data(09)+ Output –LVDS Parallel Data Word 9 Data(08)+ Output –LVDS Parallel Data Word 10 Data(07)+ Output –LVDS Parallel Data Word 11 Data(06)+ Output –LVDS Parallel Data Word 12 Data(05)+ Output –LVDS Parallel Data Word 13 Data(04)+ Output –LVDS Parallel Data Word 14 Data(03)+ Output –LVDS Parallel Data Word 15 Data(02)+ Output –LVDS Parallel Data Word 16 Data(01)+ Output –LVDS Parallel Data Word 17 Data(00)+ Output –LVDS Parallel Data Word 18 DataSync+ Output –LVDS Data Sync 19 CLK_IN+ Input - LVDS Master Clock Input 20 Data(15)- Output -LVDS Parallel Data Word 21 Data(14)- Output –LVDS Parallel Data Word 22 Data(13)- Output –LVDS Parallel Data Word 23 Data(12)- Output –LVDS Parallel Data Word 24 Data(11)- Output –LVDS Parallel Data Word 25 Data(10)- Output –LVDS Parallel Data Word 26 Data(09)- Output –LVDS Parallel Data Word 27 Data(08)- Output –LVDS Parallel Data Word 28 Data(07)- Output –LVDS Parallel Data Word 29 Data(06)- Output –LVDS Parallel Data Word 30 Data(05)- Output –LVDS Parallel Data Word 31 Data(04)- Output - LVDS Parallel Data Word 32 Data(03)- Output - LVDS Parallel Data Word 33 Data(02)- Output - LVDS Parallel Data Word 34 Data(01)- Output - LVDS Parallel Data Word 35 Data(00)- Output - LVDS Parallel Data Word 36 DataSync- Output - LVDS Data Sync 37 CLK_IN- Input - LVDS Master Clock Input 2 2 See restrictions on published datasheets at www.teledynedefence.co.uk/ Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire | UK, BD17 7SW Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk RR017 | 022016 | Page 6 OF 7 RR017 OUTLINE DRAWING See restrictions on published datasheets at www.teledynedefence.co.uk/ Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire | UK, BD17 7SW Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk RR017 | 022016 | Page 7 OF 7