SA002_2016.pdf

2-18 GHz Switch Multiplexer
SA002
2-18 GHz Switch Multiplexer
The Switch Multiplexer is a single RF input to single RF output,
fast, multi-configurable filter bank covering 2-18GHz.
Consisting of 8 equally spaced channels, each one
independently controlled, allowing 256 possible combinations
of overall filter response from input to output.
This provides the user with a fast, flexible, filter network
capable of providing different band-pass or band-stop
responses on a pulse-by-pulse basis in dense signal
environments.
Filter control is achieved by 8 independent TTL control bits.
With internal amplification, providing zero loss and low noise figure,
together with flat insertion loss and exceptionally flat group delay, the
filter is an ideal system enhancement.
Designed to with stand harsh military environments, the SA002 is a
complete front-end filter solution allowing system designers to achieve
functionality previously unattainable.
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
Full 2 – 18 GHz Coverage
8 Equally spaced channels
Low Noise Figure
Flat Group Delay
Broadband EW Signal limiting
Adaptive filtering
RWR system protection
Test lab filtering
See restrictions on published datasheets at www.teledynedefence.co.uk/
Teledyne Defence, Airedale House
Royal London Industrial Estate Acorn Park, Charlestown Shipley,
West Yorkshire | UK, BD17 7SW
Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724
Email: [email protected] | Web: www.teledynedefence.co.uk
SA002 | 022016 | Page 1 of 4
2-18 GHz Switch Multiplexer
SA002
ELECTRICAL SPECIFICATIONS
Parameter
Passband Insertion Loss Window
Specification
2-18GHz
((channeled as : 2-4-6-8-10-12-14-16-18)
0 0 to +4dB NOTE 1,
Insertion loss window variation with temperature
<0.025dB/ºC NOTE 1
Group Delay Variation
<3ns (in passband) NOTE 1
Noise Figure
10 dB max (in passband) NOTE 1
Rejection
50dBc min @ adjacent band centre
Input 1dB Compression
>0 dBm NOTE 1
Channel Control
8 bit parallel TTL
Input / Output Impedance
50 Ohm, standard SMA (f)
2:1 (input)
2.5:1 (output)
-40 to +85 degrees C
+12V DC at < 400mA
-5V DC at < 100mA
130 x 90 x 15 mm Max
Passband
VSWR
Operating Temperature Range
DC power
Size
NOTES:
1. Passband defined as being 5% from band edge of de-selected channels.
BLOCK DIAGRAM
J1 Input
J2 Output
See restrictions on published datasheets at www.teledynedefence.co.uk/
Teledyne Defence, Airedale House
Royal London Industrial Estate Acorn Park, Charlestown Shipley,
West Yorkshire | UK, BD17 7SW
Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724
Email: [email protected] | Web: www.teledynedefence.co.uk
SA002 | 022016 | Page 2 OF 7
2-18 GHz Switch Multiplexer
SA002
PERFORMANCE DATA
Insertion Loss and Rejection
The following plots show the filter in differing states, showing the true switch multiplexer nature of the SA002.
Fig 1. S21, all channels ‘ON’
Fig 2. S21 ‘Odd’ channels ‘ON’
Fig 3. Overlay of individual channels
Fig 4. Full band Group Delay response
Fig 5 & 6. Group Delay response in ‘On’ and ‘Off’ Bands
Fig 6.
See restrictions on published datasheets at www.teledynedefence.co.uk/
Teledyne Defence, Airedale House
Royal London Industrial Estate Acorn Park, Charlestown Shipley,
West Yorkshire | UK, BD17 7SW
Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724
Email: [email protected] | Web: www.teledynedefence.co.uk
SA002 | 022016 | Page 3 OF 4
2-18 GHz Switch Multiplexer
SA002
CONNECTOR INFORMATION
Connector Pin
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Ground
+ve Supply
-ve Supply
Channel 1 Control
Channel 2 Control
Channel 3 Control
Channel 4 Control
Channel 5 Control
Channel 6 Control
Channel 7 Control
Channel 8 Control
N/C
N/C
N/C
N/C
J0 – DC & Control Connector
Body Connector is MDM-15-S-H-003-P, a suitable mating connector is
required.
OUTLINE DRAWING
See restrictions on published datasheets at www.teledynedefence.co.uk/
Teledyne Defence, Airedale House
Royal London Industrial Estate Acorn Park, Charlestown Shipley,
West Yorkshire | UK, BD17 7SW
Tel: +44 (0) 1274 531` 602 | Fax: +44 (0) 1274 595 724
Email: [email protected] | Web: www.teledynedefence.co.uk
SA002 | 022016 | Page 4 OF 4