17t hEdi t i on Our Position on Quality And the Environment - Fair-Rite Products Corp. is committed to be "Your Signal Solution". Management and employees continue to adhere to the ISO/TS 16949 quality system, in effect at the time of the printing of this catalog revision, providing continual improvement towards defect prevention, variation reduction and customer satisfaction. We are committed to offering high quality products and services while maintaining an environmentally friendly and sustainable manufacturing process. As a responsible member of the corporate and local community, Fair-Rite continues to stay proactive in compliance with local, national and international environmental regulations regarding manufacturing, emissions and documentation. Modern value enhancement tools, including Control Plans, Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effects Analysis (FMEA) and Feasibility Assessments, are available for the quality planning process. Contract review, design control, and the purchasing function all meet the requirements of ISO/TS 16949. Process and product control, including measurement, traceability, handling and delivery, meet the highest quality standards. Any nonconforming or suspect product is tracked. Corrective and preventive actions, statistical methods, and internal audits are applied to guarantee continual improvement. Extensive training is provided to all employees to support the system. Product inspection, tests and records verify that specified requirements are met. Critical characteristics are monitored by statistical methods, including pre-control, control charts, and SPC. Process capability indices, Cpk's, are targeted to exceed 1.33 for these critical characteristics. When sampling plans are employed, zero defects are allowed in any sample. Visual inspection criteria for chips, cracks and surface finish are documented. IEC Standard 60424 is used as a guide for evaluation of visual imperfections. For product types not defined by IEC Standard 60424, customer specific, or Fair-Rite's visual inspection criteria shall apply. All Fair-Rite Products Corp. components are RoHS and REACH compliant per the thresholds in effect at the time of the printing of this catalog revision. Termination wire used on all board level components and the plated contacts on chip components have 100% matte tin plating over a nickel undercoating. The polypropylene cases used to assemble Fair-Rite "Snap-It" cores do not contain PBB or PBDE as a flame retardant. Fair-Rite Products Corp. adheres to the practice of continual improvement. Therefore, in order to offer our customers optimized designs, the company reserves the right to change materials, designs, dimensions, etc. at any time without notice. Our Position on Quality and the Environment . Introduction . . . . . . . . . . . . . ...... Magnetic Properties of Fair-Rite Materials . . . Fair-Rite Materials . . . . . . . . . . ...... . . . . ..... ..... ..... ..... . . . . ..... ..... ..... ..... . . . . ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... . . . . ..... ..... ..... ..... . . . . .. . ... ...... . . .... ...... Solder Profile . . . . . . . ...... EMI Suppression Beads . . . . . . . Beads on Leads . . . . . . . . . . . . PC Beads (Through Hole) . . . . . . Wound Beads . . . . . . . ...... Multi-Aperture Cores . . . . . . . . . . SM Beads (Differential-Mode) . . . . SM Beads (Common-Mode) . . . . . Chip Beads . . . . . . . . ...... Chip Arrays . . . . . . . . ...... Engineering Kits . . . . . . . . ...... . . . . . . . . . . . ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... . . . . . . . . . . . ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... . . . . . . . . . . . ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... . . . . . . . . . . . ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... . . . . . . . . . . . ..... . .. ...... . . ...... .. ...... . . ...... . . ..... . .. ...... . . ...... .. ...... .. ..... . .. ...... .. 34 35 39 42 44 47 50 55 58 64 66 . . . . . . . ..... ..... ..... ..... ..... ..... ..... . . . . . . . ..... ..... ..... ..... ..... ..... ..... . . . . . . . ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... . . . . . . . ..... ..... ..... ..... ..... ..... ..... . . . . . . . ...... .. ...... .. ...... .. ...... . . ..... . .. ...... .. ...... . . 75 80 84 87 88 89 91 ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... . . . . ..... ..... ..... ..... . . . . ...... ...... ...... ...... .. .. .. .. 93 95 97 99 ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... . . . . . . . . . . . . ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... . . . . . . . . . . . . ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... . . 102 . . 111 . . 114 . . 116 . . 118 . . 120 . . 122 . . 124 . . 126 . . 128 . . 130 . . 132 ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... . . . . . ..... ..... ..... ..... ..... . . . . . ...... ...... ...... ...... ...... . . .. .. . . . . ...... ...... ...... ...... ...... ...... ...... ...... ...... . ..... . ..... . ..... Board Components Cable Components Round Cable EMI Suppression Cores Round Cable Snap-Its . . . . . . . . . Flat Cable EMI Suppression Cores . Flat Cable Cores Assembly Clips . . . Flat Cable Snap-Its . . . . . . . . . . Connector EMI Suppression Plates . Miscellaneous Suppression Cores . . . I.F.C ... 2 ... 4 ... 8 Inductive Components Open Magnetic Circuit Rods . . . . . . . ...... . ..... . ..... . Rod Information . . . . . . . . ..... . ..... . Antenna/RFID Rods . . . . . . . . . . . . . . . . . . Bobbins . . . . . . . . . . . . ..... . ..... . Closed Magnetic Circuit Toroids . . . . . . . . . . . . . ..... . ..... . Planar Cores . . . . . . . . . . ..... . ..... . Pot Cores . . . . . . . . . . . ..... . ..... . RM Cores . . . . . . . . . . . ..... . ..... . PQ Cores . . . . . . . . . . . ..... . ..... . E Cores . . . . . . . . . . . . ..... . ..... . EFD Cores . . . . . . . . . . . ..... . ..... . ETD Cores . . . . . . . . . . . ..... . ..... . EER Cores . . . . . . . . . . . ..... . ..... . U Cores . . . . . . . . . . . . . ..... . ..... . EP Cores . . . . . . . . . . . . ..... . ..... . Product Capability . . . . . . . . ...... . ..... . ..... . References Reference Tables . . . . . . . . . . . . ..... . ..... . Glossary of Terms . . . . . . . . . . . . ..... . ..... . Soft Ferrite References . . . . . . . . . ..... . ..... . Magnetic Design Formulas . . . . . . . . . . . . . . . . . . . Wire Table of Copper Magnet Wire . . . . . . . . . . . . . . . Technical Articles Use of Ferrites in Broadband Transformers . . . . . . . . . . How to Choose Ferrite Components for EMI Suppression . . ...... . ..... . ..... . Part Number Index . . . . . . . . . . ...... . ...... . ...... 134 135 136 138 139 . . 140 . . 144 . . 154 Copyright © 2013 by Fair-Rite Products Corp. All rights reserved. No part of the contents of this book may be published or transmitted in any form or by any means without the expressed written permission of Fair-Rite Products Corp. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: E-mail: www.fair-rite.com [email protected] 1 History The history of magnetism began with the discovery of the properties of a mineral called magnetite (Fe3O4). The most plentiful deposits were found in the district of Magnesia in Asia Minor (hence t he mineral's name) w here it was observed, centuries before the birth of Christ, that these naturally occurring stones would attract iron. La ter on it found application in the lodestone of early navigators. In 1600 William Gilbert published De Magnete, the first scientific study on magnetism. In 1819 Hans Christian Oersted observed that an el ectric current in a w ire affected a magnetic compass needle, thus with later contributions by Faraday, Maxwell, Hertz and others, the new science of electromagnetism came into being. Even though the e xistence of naturally occurring magnetite, a weak type of h ard ferrite, had been known since antiquity, producing an analogous soft magnetic material in the laboratory proved elusive. Research on magnetic oxides was going on concurrently during the 1930's, primarily in Japan and The Netherlands. However, it was not until 1945 that J. L. Snoek of the Philips' Research Laboratories in The Netherlands succeeded in producing a soft ferrite· material for commercial applications. Fair-Rite Products Corp. was not far behind in the manufacture and sale of soft ferrites for use in the electronics industry. It was formed in 1 952 and officially started operations in 1953. The ensuing years have seen a rather crude product, which was available in only a few shapes and materials, develop into a major line of ferrite components for inductive devices, produced in many core configurations with a w ide selection of m aterials. The application of ferrites in EMI suppression as shield beads and broadband chokes, where an effective resistive impedance is produced at high frequencies, has grown so fast in the last decade, that their use as EMI suppressors is limited only by the imagination of the end user. Soft Ferrites The single most important characteristic of soft ferrites, as compared to other magnetic materials, is the high volume resistivity exhibited in th e monolithic form. Since eddy current losses are inversely proportional to resistivity and these losses increase with the square of the frequency, high resistivity becomes an essential factor in magnetic materials intended for high frequency operation The magnetic properties of ferrite components are isotropic, and by employing various pressing, injection molding, and/or grinding techniques, a wide range o f complex shapes can be formed. There is no other class of magnetic material that can match soft ferrites in performance, cost and volumetric efficiency, from audio frequencies into the GHz range. During the last 50 years the basic constituents of ferrites have changed little, but purity of r aw materials and process control have improved dramatically. Ferrites are ceramic materials with the general chemical formula MO.Fe2O3, where MO is on e or more divalent metal oxides blended with 48 to 60 mole percent of iron oxide. Fair-Rite manufactures four broad groups of soft ferrite materials: Manganese zinc (Fair-Rite 31, 33, 73, 75, 76, 77, 78, 79, 97, 95 and 98 material) Nickel zinc (Fair-Rite 43, 44, 51, 52, 61, 67 and 68 material) Manganese (Fair-Rite 85 material – special order) Magnesium zinc (Fair-Rile 46 material) Manganese zinc ferrites are completely vitrified and have very low porosity. They have the highest permeabilities and exhibit volume resistivities ranging from one hun dred to several thousand ohmcentimeter. Manganese zinc ferrite components are used in tuned circuits and magnetic power designs from the low kilohertz range i nto the broadcast spectrum. These ferrites have a linear expansion coefficient of approximately 10 ppm/ºC, The nickel zinc ferrites vary in porosity, and frequently contain oxides of other metals, such as those of magnesium, manganese, copper or cobalt. Volume resistivities range from several kilohm-centimeter to tens of megohm-centimeter. In general, they are used at higher frequencies (above 1 MHz), and are suitable for low flux density applications. Nickel zinc ferrites have a linear expansion coefficient of approximately 8 ppm/°C. The manganese ferrite is a d ense, temperature stable material displaying a high degree of squareness in its hysteresis loop. This makes this material uniquely suited for such applications as multiple output control in switched-mode power supplies and high frequency magnetic amplifiers. The magnesium zinc ferrite has similar characteristics as NiZn ferrite. The composition of MgZn material does not contain any nickel, hence avoiding potential environmental issues as well as reducing the raw material component cost. As is evident from the flow diagram on page 3, there is considerable processing involved, and the manufacturing cycle will take a minimum of two weeks. The parts listed in the catalog represent a broad cross section of the wide variety of cores produced by Fair-Rite Products. Large OEM quantities are manufactured by Fair-Rite to order. Most of th e more commonly used parts are stocked by our di stributors, offering prompt deliveries. For a complete listing of our distributors visit our site on the Internet at www.fair-rite.com. Many of the parts pr oduced by Fair-Rite are made to customer specifications, and we welcome inquiries involving application specific designs. We have the capability to design tooling rapidly, and have it fabricated either by our own tool shop or by outside vendors. 'Footnote: The difference between hard and soft ferrite is not tactile, but rather a magnetic characteristic. Soft ferrite does not retain significant magnetization, whereas hard ferrite magnetization is considered permanent. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 2 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: E-mail: www.fair-rite.com [email protected] 3 Property Unit Symbol Initial Permeability @ B <10 gauss Flux Density @ Field Strength Residual Flux Density Coercive Force Loss Factor @ Frequency Temperature Coefficient of Initial Permeability (20 70ºC) Curie Temperature Resistivity Power Loss Density 25kHz - 2000 G - 100ºC 100kHz - 1000 G - 100ºC 100kHz - 2000 G - 100ºC 500kHz - 500 G - 100ºC Recommended Frequency Range µi gauss mT oersted A/m gauss mT oersted A/m -6 material data H Br Hc 67 61 52 51 44 16 40 125 250 350 500 2700 270 40 3200 1000 100 7 560 2300 230 20 1600 800 80 3.5 280 2350 235 15 1200 1200 120 1.8 144 4200 420 10 800 2900 290 0.6 48 3200 320 10 800 1200 120 0.6 48 3000 300 10 800 1100 110 0.45 36 10 MHz tan δ/µi 500 100 150 50 30 1 45 1 40 1 125 1 %/oC T.C. 0.10 0.05 0.10 1.00 0.80 0.75 Tc >500 >475 >300 >250 >170 >160 ρ 7 7 8 9 9 o C ohm-cm mW/cm 3 P 10 10 10 10 10 Phone: 9 ----- ----- ----- ----- ----- ----- <400 --- <300 --- <100 <20 -- -- 200-2000 200-1000 <200 25-300 -- -- -- -- 8 9 10 11 12 13 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 4 10 MHz Low flux density devices EMI suppression Power magnetics See this page for additional Application Area B 68 (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: E-mail: www.fair-rite.com [email protected] Property Unit Symbol Initial Permeability @ B <10 gauss Flux Density @ Field Strength Residual Flux Density Coercive Force Loss Factor @ Frequency Temperature Coefficient of Initial Permeability (20 - 70ºC) Curie Temperature Resistivity µi gauss mT oersted A/m gauss mT oersted A/m -6 material data Br Hc 43 79 31 77 500 600 800 1400 1500 2000 3000 300 10 800 1900 190 0.4 32 2800 280 5 400 1200 120 0.6 48 2900 290 10 800 1300 130 0.45 36 4700 470 5 400 1700 170 0.4 32 3400 340 5 400 2500 250 0.35 28 4900 490 5 400 1800 180 0.3 24 tan δ/µi 60 0.1 25 0.2 250 1 4 0.1 20 0.1 15 0.1 %/oC T.C. -- 0.10 1.25 0.60 1.60 0.70 Tc >140 >150 >130 >225 >130 >200 ρ 8 200 3000 100 o C mW/cm 3 P 10 100 10 5 ----- ----- ----- ---80 ----- 200 ---- -25-300 -- <3 --- <10 25-300 -- --<0.75 -1-300 -- <3 -<0.1 14 15 16 18/19 17 20/21 MHz Low flux density devices EMI suppression Power magnetics See this page for additional Application Area H 33 10 MHz ohm-cm Power Loss Density 25kHz - 2000 G - 100ºC 100kHz - 1000 G - 100ºC 100kHz - 2000 G - 100ºC 500kHz - 500 G - 100ºC Recommended Frequency Range B 46 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 5 Property Unit Symbol Initial Permeability @ B <10 gauss Flux Density @ Field Strength Residual Flux Density Coercive Force Loss Factor @ Frequency Temperature Coefficient of Initial Permeability (20 - 70ºC) Curie Temperature Resistivity Power Loss Density 25kHz - 2000 G - 100ºC 100kHz - 1000 G - 100ºC 100kHz - 2000 G - 100ºC 500kHz - 500 G - 100ºC Recommended Frequency Range µi gauss mT oersted A/m gauss mT oersted A/m -6 H Br Hc 78 98 73 95 75 76 2000 2300 2400 2500 3000 5000 10000 5000 500 5 400 1500 150 0.16 13 4800 480 5 400 1500 150 0.2 16 5000 500 5 400 1800 180 0.17 14 3900 390 5 400 1500 150 0.24 19.2 5000 500 5 400 800 80 0.13 10 4300 430 5 400 1400 140 0.16 13 4000 400 5 400 1800 180 0.12 9.6 10 MHz tan δ/µi 3.5 0.1 4.5 0.1 3.5 0.1 10 0.1 3 0.1 15 0.1 15 0.025 %/oC T.C. 1.40 1.00 1.50 0.65 0.40 0.60 0.50 Tc >220 200 >200 200 >215 200 >160 100 >220 200 >140 300 >120 50 -50 320 -- 75 85 --- -50 310 -- ----- -50 310 -- 140 ---- ----- --<0.4 <2.5 -<0.2 --<0.2 -<50 -- --<0.2 <0.75 <30 <0.1 <0.5 --- 22/23 24/25 26/27 28 29/30 31 32 o C ohm-cm mW/cm 3 ρ P MHz Low flux density devices EMI suppression Power magnetics See this page for additional material data Application Area B 97 These tables provide an overview of the major magnetic properties of all the Fair-Rite Products Corp. ferrite materials. Measurements are made at room temperature, unless otherwise specified, using medium size toroidal cores. Products will generally comply with these material properties. However detailed ferrite component specifications are as listed in the catalog or as mutually agreed to with the customer for their specific application. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 6 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 E • Web: www.fair-rite.com -mail: [email protected] 7 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 8 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 9 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 10 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 11 This material is available as special order for customer specific applications. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 12 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 13 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 14 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Not recommended for new designs. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 15 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 16 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 17 This material is available as special order for customer specific applications. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 18 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 19 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 20 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 21 0.10 1.00 10.00 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 22 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 23 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 24 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 25 0.10 1.00 10.00 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 26 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 27 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 28 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 0.10 1.00 10.00 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 29 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 30 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 31 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 32 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 33 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 34 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite offers a broad selection of ferrite EMI suppression beads with guaranteed minimum impedance specifications. • Beads with a "1" as the last digit of the part number are not burnished. Parts that are burnished to break the sharp edges have a "2" as the last digit. • Upon request beads can be supplied with a Parylene coating. The last digit of the Parylene coated part is a "4". The minimum coating thickness beads is 0.005 mm (0.0002"). • The column "H (Oe)" gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of "H" times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note “How to choose Ferrite Components for EMI Suppression”. • Suppression beads are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. • Single turn impedance tests for 73 and 43 material beads are performed on the 4193A Vector Impedance Analyzer. The 61 material beads are tested on the 4291A RF Impedance Analyzer. Beads are tested with the shortest practical wire length. • Performance curves for these suppression components are on our web site. • For any EMI suppression bead requirement not listed here, feel free to contact our customer service for availability and pricing. • The “C” dimension, the bead length, can be modified to suit specific applications. • Our "Shield Bead Kit" (part number 0199000019) contains a selection of these beads. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1= not burnished, 2 = burnished and 4 = Parylene coated. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 35 Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Lower Frequencies < 50 MHz (73 material) Part Number 2673901301 2673004601 2673004701 2673030101 2673025301 2673004801 2673028602 2673012401 2673002201 2673000501 2673000201 2673000101 2673000301 2673000701 2673022401 2673021801 2673018001 2673004901 2673001601 2673015301 2673000801 2673200201 2673003201 2673002402 A 0.95 -0.05 0.036 1.10 -0.10 0.041 1.45 -0.15 0.054 1.22 -0.13 0.045 1.25 -0.10 0.047 2.10 -0.15 0.080 2.13 -0.10 0.082 1.55 -0.10 0.059 1.95 -0.02 0.072 2.00 -0.15 0.076 2.00 -0.15 0.076 3.50 ±0.20 0.138 3.50 ±0.20 0.138 3.50 ±0.20 0.138 5.10 ±0.25 0.200 5.10 ±0.25 0.200 2.85 ±0.10 0.112 2.85 ±0.10 0.112 3.55 ±0.15 0.140 4.10 -0.25 0.156 7.50 ±0.25 0.296 5.20 ±0.15 0.205 5.60 -0.50 0.210 9.65 ±0.25 0.380 B 0.45 +0.10 0.020 0.65 +0.10 0.028 0.70 +0.10 0.029 0.80 +0.10 0.033 0.80 +0.10 0.033 0.85 +0.10 0.034 0.85 +0.10 0.034 0.95 +0.15 0.040 1.05 +0.10 0.043 1.05 +0.10 0.043 1.05 +0.10 0.043 1.30 ±0.10 0.051 1.30 ±0.10 0.051 1.30 ±0.10 0.051 1.45 +0.25 0.062 1.45 +0.25 0.062 1.65 +0.15 0.068 1.65 +0.15 0.068 1.65 +0.25 0.070 1.80 ±0.15 0.071 2.25 +0.25 0.094 2.65 ±0.25 0.105 2.65 ±0.25 0.105 5.00 ±0.20 0.197 C 3.80 ±0.20 0.150 4.10 -0.30 0.156 2.30 ±0.15 0.090 5.30 -0.45 0.200 3.80 ±0.20 0.150 2.90 -0.45 0.105 5.60 ±0.15 0.220 4.20 -0.25 0.160 10.40 ±0.25 0.410 1.65 -0.25 0.060 3.80 ±0.25 0.150 3.25 ±0.25 0.128 6.00 ±0.25 0.236 12.70 ±0.35 0.500 6.35 ±0.25 0.250 11.10 ±0.35 0.437 6.65 ±0.25 0.262 10.45 ±0.25 0.410 3.30 -0.40 0.122 6.85 ±0.25 0.270 7.55 ±0.25 0.297 20.60 ±0.75 0.812 12.70 ±0.50 0.500 5.05 -0.45 0.190 Wt. (g) H (Oe) 0.01 1 Impedance (Ω) 5 10 MHz MHz 6.00 5.3 0.01 4.70 0.01 Phone: 25 + MHz MHz 13 16 24 3.3 8.2 12.5 19 4.00 3.1 7.6 12.5 17 0.01 4.10 3.5 8.6 11 17 0.01 4.00 2.9 7.1 10 15 0.03 3.10 5.5 13.5 18 28 0.07 2.70 13 30.5 38 50 0.02 3.30 3.5 8.6 11 19 0.09 2.90 14 33.5 38 55 0.01 2.80 2.1 6.3 7.5 12 0.04 2.80 5.2 12.5 18 27 0.13 2.00 8.1 19.5 25 35 0.24 2.00 15.5 37.5 57 63 0.51 2.00 34.5 81.5 120 125 0.56 1.50 20 47.5 54 58 1.00 1.50 35.5 84 94 95 0.13 1.80 8.3 20 29 41 0.20 1.80 13.5 32.5 40 58 0.11 1.60 5.1 12.5 16 24 0.32 1.50 14 34 41 54 1.40 1.00 23 55.5 48 45 1.60 1.10 37 89 110 113 1.00 1.10 23.5 56.5 60 60 1.20 0.59 7.9 19 19 15 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 36 + (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Broadband Frequencies 25-300 MHz (43 material) A B C Wt. (g) H (Oe) MHz MHz 2643004601 1.10 -0.10 0.041 1.45 -0.15 0.054 1.65 ±0.025 0.065 2.10 -0.15 0.080 1.95 -0.20 0.072 2.00 -0.15 0.076 2.00 -0.15 0.076 3.50 ±0.20 0.138 3.50 ±0.20 0.138 3.50 ±0.20 0.138 5.10 ±0.25 0.200 5.10 ±0.25 0.200 5.10 ±0.25 0.200 3.50 ±0.20 0.138 3.50 ±0.20 0.138 2.85 ±0.10 0.112 3.50 ±0.20 0.138 3.55 ±0.15 0.140 3.55 ±0.15 0.140 5.10 ±0.25 0.200 7.50 ±0.20 0.296 7.60 ±0.25 0.300 5.60 -0.50 0.210 6.35 ±0.15 0.250 6.35 ±0.15 0.250 6.35 ±0.15 0.250 9.50 ±0.25 0.375 9.50 ±0.25 0.375 9.50 ±0.25 0.375 9.50 ±0.25 0.375 0.65 +0.10 0.028 0.70 +0.10 0.029 0.85 +0.10 0.034 0.85 +0.10 0.034 1.05 +0.10 0.043 1.05 +0.10 0.043 1.05 +0.10 0.043 1.30 ±0.10 0.051 1.30 ±0.10 0.051 1.30 ±0.10 0.051 1.45 +0.25 0.062 1.45 +0.25 0.062 1.45 +0.25 0.062 1.60 ±0.10 0.063 1.60 ±0.10 0.063 1.65 +0.15 0.068 1.65 +0.25 0.070 1.65 +0.25 0.070 1.65 +0.25 0.070 2.30 ±0.20 0.090 2.25 +0.25 0.094 2.25 +0.25 0.094 2.65 ±0.25 0.105 2.95 +0.45 0.125 2.95 +0.45 0.125 2.95 +0.45 0.125 4.50 +0.75 0.192 4.50 +0.75 0.192 4.75 +0.30 0.193 4.75 +0.30 0.193 4.10 -0.30 0.156 2.30 ±0.15 0.090 3.68 -0.25 0.140 2.90 -0.45 0.105 10.40 ±0.25 0.410 1.65 -0.25 0.060 3.80 ±0.25 0.150 3.25 ±0.25 0.128 6.00 ±0.25 0.236 12.70 ±0.35 0.500 3.40 -0.45 0.125 6.35 ±0.25 0.250 11.10 ±0.35 0.437 3.25 ±0.25 0.128 6.00 ±0.25 0.236 3.75 ±0.25 0.147 4.05 ±0.25 0.160 3.30 -0.40 0.122 5.95 ±0.25 0.234 12.70 ±0.35 0.500 7.55 ±0.25 0.297 15.10 ±0.75 0.595 12.70 ±0.50 0.500 12.70 ±0.50 0.500 15.90 ±0.50 0.625 25.40 ±0.75 1.000 6.35 ±0.35 0.250 14.50 ±0.60 0.570 10.40 ±0.25 0.410 15.90 ±0.45 0.625 0.10 4.70 9 12.5 31 39 0.01 4.00 8 12.5 26 39 0.02 3.40 12 17 31 47 0.03 3.10 12 18 31 47 0.08 2.90 26 34 58 77 0.01 2.80 6 9 22 33 0.03 2.80 12 16 31 46 0.10 2.00 17 26 40 56 0.18 2.00 29 46 60 83 0.38 2.00 60 89 125 148 0.19 1.50 19 30 41 61 0.38 1.50 36 55 82 97 0.67 1.50 62 96 131 151 0.10 1.70 13 21 35 50 0.18 1.70 23 38 55 70 0.06 1.80 10 15 30 43 0.12 1.60 14 24 38 52 0.09 1.60 11 19 30 46 0.18 1.60 21 31 48 65 0.81 1.20 49 78 120 123 1.00 1.00 42 63 92 109 2.10 1.00 83 115 200 195 0.87 1.10 42 63 88 110 1.20 0.91 43 69 102 111 1.50 0.91 53 85 122 132 2.50 0.91 83 135 200 196 1.40 0.60 21 35 50 66 3.10 0.60 47 78 115 119 2.20 0.60 34 53 80 92 3.40 0.60 51 83 120 127 2643004701 2643020501 2643004801 2643002201 2643000501 2643000201 2643000101 2643000301 2643000701 2643200101 2643022401 2643021801 2643001501 2643025601 2643023201 2643013801 2643001601 2643001301 2643005701 2643000801 2643300101 2643003201 2643250402 2643250302 2643250202 2643375102 2643375002 2643006302 2643023402 10 Impedance (Ω) 25 100 Part Number MHz + + 250 MHz Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 37 Broadband Frequencies 25-300 MHz (43 material) A B C Wt. (g) H (Oe) MHz MHz MHz 2643023002 9.50 ±0.25 0.375 9.65 ±0.25 0.380 9.65 ±0.25 0.380 4.75 +0.30 0.193 5.00 ±0.20 0.197 6.35 ±0.15 0.250 19.05 ±0.70 0.750 5.05 -0.45 0.190 7.35 ±0.25 0.290 4.10 0.60 60 100 145 148 1.10 0.59 16 26 43 56 1.30 0.51 15 24 38 55 2643002402 2643012702 10 Impedance (Ω) 25 100 Part Number MHz + + 250 Higher Frequencies 250-1000 MHz (61 material) Part Number 2661000101 2661000301 2661000701 2661022401 2661021801 2661023801 2661000801 2661250402 2661375102 A 3.50 ±0.20 0.138 3.50 ±0.20 0.138 3.50 ±0.20 0.138 5.10 ±0.25 0.200 5.10 ±0.25 0.200 5.10 ±0.25 0.200 7.50 ±0.25 0.296 6.35 ±0.15 0.250 9.50 ±0.25 0.375 B 1.30 ±0.10 0.051 1.30 ±0.10 0.051 1.30 ±0.10 0.051 1.45 +0.25 0.062 1.45 +0.25 0.062 1.45 +0.25 0.062 2.25 +0.25 0.094 2.95 +0.45 0.125 4.50 +0.75 0.192 C 3.25 ±0.25 0.128 6.00 ±0.25 0.236 12.70 ±0.35 0.500 6.35 ±0.25 0.250 11.10 ±0.35 0.437 22.85 ±0.75 0.900 7.55 ±0.25 0.297 12.70 ±0.50 0.500 6.35 ±0.35 0.250 Impedance (Ω) 250 500 1000 MHz MHz MHz 30 45 62 95 2.00 54 82 103 120 0.38 2.00 120 158 178 185 0.38 1.50 58 82 103 138 0.67 1.50 102 141 167 185 1.40 1.50 210 286 325 350 1.00 1.00 75 103 120 143 1.20 0.91 85 115 135 155 2.50 0.60 42 63 83 117 Wt. (g) H (Oe) 0.10 2.00 0.18 100 MHz + Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 38 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] + Ferrite suppression beads are supplied assembled on tinned copper wire for automated circuit board assembly. • Parts with a "2" as the last digit of the part number are supplied taped and reeled per IEC 60286-1 and EIA RS-296-F standards. Taped and reeled parts are supplied 4500 pieces on a 14" reel. Taping details: Component pitch 5 mm. Inside tape spacing 52.5 mm. Tape width 6 mm. • Beads-on-leads can be supplied bulk packed. The last digit of bulk packed parts is a "1". • Wires are oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating. The resistance of the wire is 3.5 mOhm for the 22 AWG and 2.2 mOhm for the 20 AWG wire. • Beads-on-leads are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. The impedances of the 73 & 43 beads-on-leads are measured on the 4193A Vector Impedance Analyzer. The 61 beads-on-leads are tested for impedance on the 4291A RF Impedance Analyzer. • Performance curves for these suppression components are on our web site. • For any bead-on lead requirement not listed here, feel free to contact our customer service group for availability and pricing. • Our "Bead-on-Lead Suppression Kit" (part number 0199000028) is available for prototype evaluation. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1 = bulk packed, 2 = taped and reeled. Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Lower Frequencies < 50 MHz (73 material) Part Number 2773001112 2773001111 2773015112 2773015111 2773005112 2773005111 2773003112 2773003111 2773004112 A 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 B 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 C 4.45 ±0.25 0.175 4.45 ±0.25 0.175 5.25 ±0.25 0.206 5.25 ±0.25 0.206 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.70 ±0.25 0.263 6.70 ±0.25 0.263 7.60 ±0.30 0.300 D 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG Wt. (g) 1 Reel Information Tape Pitch Parts + + Width mm 14" MHz MHz mm Reel Impedance (Ω) 5 10 25 MHz MHz 0.40 12 34 48 61 6 5 4500 0.40 12 34 48 61 - - - 0.40 17 43 55 68 6 5 4500 0.40 17 43 55 68 - - - 0.40 22 51 63 78 6 5 4500 0.40 22 51 63 78 - - - 0.50 26 59 70 86 6 5 4500 0.50 26 59 70 86 - - - 0.50 30 69 80 100 6 5 4500 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 39 Lower Frequencies < 50 MHz (73 material) Part Number 2773004111 2773002112 2773002111 2773007112 2773007111 2773008112 2773008111 2773009112 2773009111 A 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 B 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 C 7.60 ±0.30 0.300 8.90 ±0.30 0.350 8.90 ±0.30 0.350 9.50 ±0.30 0.374 9.50 ±0.30 0.374 11.40 ±0.40 0.450 11.40 ±0.40 0.450 13.80 ±0.50 0.545 13.80 ±0.50 0.545 D 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG Wt. (g) 1 Reel Information Tape Pitch Parts + + Width mm 14" MHz MHz mm Reel Impedance (Ω) 5 10 25 MHz MHz 0.50 30 69 80 100 - - - 0.60 36 84 94 115 6 5 4500 0.60 36 84 94 115 - - - 0.60 38 90 110 115 6 5 4500 0.60 38 90 110 115 - - - 0.70 43 112 125 145 6 5 4500 0.70 43 112 125 145 - - - 0.70 46 138 151 170 6 5 4500 0.70 46 138 151 170 - - - Broadband Frequencies 25-300 MHz (43 material) Part Number 2743001112 2743001111 2743015112 2743015111 2743005112 2743005111 2743003112 2743003111 2743004112 2743004111 2743002112 2743002111 2743007112 2743007111 2743008112 2743008111 A 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 B 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 0.244 62.00 ±1.50 0.244 62.00 ±1.50 0.244 62.00 ±1.50 0.244 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 C 4.45 ±0.25 0.175 4.45 ±0.25 0.175 5.25 ±0.25 0.206 5.25 ±0.25 0.206 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.70 ±0.25 0.263 6.70 ±0.25 0.263 7.60 ±0.30 0.300 7.60 ±0.30 0.300 8.90 ±0.30 0.350 8.90 ±0.30 0.350 9.50 ±0.30 0.374 9.50 ±0.30 0.374 11.40 ±0.40 0.450 11.40 ±0.40 0.450 D 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG Wt. (g) 10 MHz Impedance (Ω) 25 100 250 + + MHz MHz MHz Reel Information Tape Pitch Parts Width mm 14" mm Reel 0.40 31 49 68 65 6 5 4500 0.40 31 49 68 65 - - - 0.40 36 54 82 78 6 5 4500 0.40 36 54 82 78 - - - 0.40 40 60 91 90 6 5 4500 0.40 40 60 91 90 - - - 0.50 44 65 100 101 6 5 4500 0.50 44 65 100 101 - - - 0.50 50 75 110 115 6 5 4500 0.50 50 75 110 115 - - - 0.60 57 88 133 134 6 5 4500 0.60 57 88 133 134 - - - 0.60 61 96 150 143 6 5 4500 0.60 61 96 150 143 - - - 0.70 72 116 180 168 6 5 4500 0.70 72 116 180 168 - - - Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 40 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Broadband Frequencies 25-300 MHz (43 material) Part Number 2743009112 2743009111 2743012201 2743013211 2743014221 A 3.50 ±0.25 0.138 3.50 ±0.25 0.138 9.80 ±0.30 0.385 9.80 ±0.30 0.385 9.80 ±0.30 0.385 B 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 C 13.80 ±0.50 0.545 13.80 ±0.50 0.545 11.40 ±0.40 0.449 14.00 ±0.50 0.550 16.50 ±0.50 0.650 D 0.65 22 AWG 0.65 22 AWG 0.80 20 AWG 0.80 20 AWG 0.80 20 AWG Wt. (g) 10 MHz Impedance (Ω) 25 100 250 + + MHz MHz MHz Reel Information Tape Pitch Parts Width mm 14" mm Reel 0.70 86 143 220 196 6 5 4500 0.70 86 143 220 196 - - - 4.50 121 193 271 253 - - - 5.50 147 235 331 281 - - - 6.50 173 280 391 296 - - - Higher Frequencies 250-1000 MHz (61 material) Part Number 2761001112 2761001111 2761015112 2761015111 2761004112 2761004111 2761002112 2761002111 2761007112 2761007111 2761008112 2761008111 2761009112 2761009111 A 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 3.50 ±0.25 0.138 B 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 62.00 ±1.50 2.440 C 4.45 ±0.25 0.175 4.45 ±0.25 0.175 5.25 ±0.25 0.206 5.25 ±0.25 0.206 7.60 ±0.30 0.300 7.60 ±0.30 0.300 8.90 ±0.30 0.350 8.90 ±0.30 0.350 9.50 ±0.30 0.374 9.50 ±0.30 0.374 11.40 ±0.40 0.450 11.40 ±0.40 0.450 13.80 ±0.50 0.545 13.80 ±0.50 0.545 D 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG Wt. (g) 100 MHz Impedance (Ω) 250 500 1000 + + MHz MHz MHz Reel Information Tape Pitch Parts Width mm 14" mm Reel 0.40 52 72 83 90 6 5 4500 0.40 52 72 83 90 - - - 0.40 62 85 97 105 6 5 4500 0.40 62 85 97 105 - - - 0.50 89 121 138 148 6 5 4500 0.50 89 121 138 148 - - - 0.60 105 142 161 171 6 5 4500 0.60 105 142 161 171 - - - 0.60 112 151 171 182 6 5 4500 0.60 112 151 171 182 - - - 0.70 134 181 204 217 6 5 4500 0.70 134 181 204 217 - - - 0.70 162 218 246 261 6 5 4500 0.70 162 218 246 261 - - - Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 41 Multiple single turn or multi-turn printed circuit EMI suppression beads are available in two Fair-Rite materials. The broadband 44 material and in the high frequency 52 material grade. • PC Beads can be supplied with lower component heights "C". Also, the wire length "F" can be modified to specific requirements. • Wires are oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating. Wires on top of the beads are covered with a layer of epoxy. • PC Beads are controlled for impedance only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. • The PC Beads in 44 material are measured on the 4193A Vector Impedance Analyzer. The 52 PC Beads are tested for impedance on the 4291A RF Impedance Analyzer. • Recommended operating and storage temperature for the PC Beads is -55 oC to +125 oC. • Performance curves for these suppression components are on our web site. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1 = standard wire length 2.4 mm (0.095") minimum, 2 = wire length 3.1 mm (0.122”) minimum. Legend Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 42 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) Test frequency + Broadband Frequencies 10-300 MHz (44 material) Part Number Fig. 2944776101 1 2944778101 2 2944778301 3 2944770301 4 A 8.00 -0.35 0.308 11.20 -0.50 0.430 11.20 -0.50 0.430 13.45 ±0.25 0.530 B 7.60 -0.50 0.290 5.75 -0.50 0.216 11.20 -0.50 0.430 11.20 -0.50 0.430 C 11.80 Max 0.464 Max 11.80 Max 0.464 Max 11.80 Max 0.464 Max 11.80 Max 0.464 Max D 2.54 ±0.10 0.100 2.54 ±0.10 0.100 2.54 ±0.10 0.100 2.54 ±0.10 0.100 E 2.54 ±0.10 0.100 2.54 ±0.10 0.100 7.60 ±0.20 0.300 7.60 ±0.20 0.300 F G 2.40 Min 0.095 Min 2.40 Min 0.095 Min 2.40 Min 0.095 Min 2.40 Min 0.095 Min 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG 0.65 22 AWG Wt. (g) 10 Impedance (Ω) 25 100 250 + + MHz MHz MHz MHz 2.60 115 188 288 305 2.70 115 188 288 305 6.00 142 219 338 335 7.40 142 219 338 335 Higher Frequencies 250-1000 MHz (52 material) Part Number Fig. 2952776101 1 2952778301 3 A B 8.00 -0.35 7.60 -0.50 0.308 0.290 11.20 -0.50 11.20 -0.50 0.430 0.430 C 11.80 Max 0.464 Max 11.80 Max 0.464 Max D 2.54 ±0.10 0.100 2.54 ±0.10 0.100 E 2.54 ±0.10 0.100 7.60 ±0.20 0.300 F G 2.40 Min 0.095 Min 2.40 Min 0.095 Min 0.65 22 AWG 0.65 22 AWG Wt. (g) 100 Impedance (Ω) 250 500 1000 + + MHz MHz MHz MHz 2.60 270 380 345 250 6.00 320 460 395 300 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 43 Six and eleven hole beads, in two NiZn materials, are available both as beads (product class 26) and wound with tinned copper wire in several winding configurations (product class 29). • Parts with a “1” as the last digit of the part number are supplied bulk packed. Wound beads with part numbers 29--666631 and 29--666651 can be supplied radially taped and reeled per IEC 60286-1 and EIA 468-B standards. For these taped and reeled wound beads the last digit of the part number is a “4”. Taped and reeled wound beads are supplied 500 pieces on a 13” reel. • Wire used for winding is oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating. • Beads are controlled for impedance limits only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. The 44 material beads and wound beads are tested on the 4193A Vector Impedance Meter. The 61 material parts on the 4291A RF Impedance Analyzer. • Recommended storage temperature and operating temperature is -55 oC to 125 oC • Performance curves for these suppression components are on our web site. • For any wound bead requirement not listed in here, please contact our customer service group for availability and pricing. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1 = bulk packed, 4 = taped and reeled. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 44 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Legend + Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) Test frequency A1/2 turn is defined as a single pass through a hole. Beads Part Number Fig. Turns Tested 2644666611 1 1½ 2661666611 1 1½ 2644777711 2 2½ A B 6.00 ±0.25 0.236 6.00 ±0.25 0.236 10.00 ±0.25 0.394 C 0.75 +0.15 0.032 0.75 +0.15 0.032 0.90 +0.15 0.038 D 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 Wt. (g) 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 7.50 Ref 0.295 Ref 10 + Impedance (Ω) 50 100 + + 200 + MHz MHz MHz MHz 1.20 213 400 470 _ 1.20 _ 280 380 510 3.30 375 905 500 _ Broadband Frequencies 1-200 MHz (44 material) Reel Information Pitch Parts mm 13" Reel Row # Part Number Fig. A B C D Wt. (g) (1) 2944666661 1-1 1.30 - - (3) 2944666654 1-2 1.30 12.7 500 (4) 2944666671 1-3 1.40 - - (5) 2944666681 1-4 1.40 - - (6) 2944666631 1-5 1.40 - - (7) 2944666634 1-5 1.40 12.7 500 (8) 2944777741 2-1 3.80 - - (9) 2944777721 2-2 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 7.50 Ref 0.295 Ref 7.50 Ref 0.295 Ref - 1-2 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 - 2944666651 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.90 +0.15 0.038 0.90 +0.15 0.038 1.30 (2) 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 10.00 ±0.25 0.394 10.00 ±0.25 0.394 3.90 - - Table Continued ... Row # Part Number Turns Wire Size 1st Wire Length 2nd Wire Length (1) 2944666661 1½ 45 2944666651 2 _ (3) 2944666654 2 (4) 2944666671 2½ (5) 2944666681 2 x 1½ (6) 2944666631 3 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 _ (2) 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG Impedance (Ω) 50 100 1 10 MHz MHz MHz MHz MHz 213 400 470 380 58 300 650 600 415 _ 58 300 650 600 415 _ 87 400 850 725 410 28.0 ±3.0 1.102 _ 45 213 400 470 380 115 500 1000 690 400 + + + 200 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 45 Table Continued ... Row # Part Number Turns Wire Size 1st Wire Length 2nd Wire Length (7) 2944666634 3 2944777741 4½ (9) 2944777721 2 x 2½ 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 _ (8) 0.53 24 AWG 0.65 22 AWG 0.65 22 AWG Impedance (Ω) 50 100 1 10 MHz MHz MHz MHz MHz 115 500 1000 690 400 _ 150 815 1250 500 375 28.0 ±3.0 1.102 45 375 905 500 400 + + + 200 Higher Frequencies 50-500 MHz (61 material) Reel Information Pitch Parts mm 13" Reel Row # Part Number Fig. A B C D Wt. (g) (10) 2961666661 1-1 1.30 - - (12) 2961666654 1-2 1.30 12.7 500 (13) 2961666671 1-3 1.40 - - (14) 2961666681 1-4 1.40 - - (15) 2961666631 1-5 1.40 - - (16) 2961666634 1-5 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref 3.50 Ref 0.138 Ref - 1-2 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 10.00 ±0.25 0.394 - 2961666651 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 0.75 +0.15 0.032 1.30 (11) 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 6.00 ±0.25 0.236 1.40 12.7 500 Table Continued ... Row # Part Number Turns Wire Size 1st Wire Length 2nd Wire Length (10) 2961666661 1½ 75 2961666651 2 _ (12) 2961666654 2 (13) 2961666671 2½ (14) 2961666681 2 x 1½ (15) 2961666631 3 (16) 2961666634 3 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 38.0 ±3.0 1.500 _ (11) 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG 0.53 24 AWG Impedance (Ω) 100 200 10 50 MHz MHz MHz MHz MHz 280 380 510 600 100 400 560 760 700 _ 100 400 560 760 700 _ 150 560 780 960 600 28.0 ±3.0 1.102 _ 75 280 380 510 600 175 700 1000 1100 625 _ 175 700 1000 1100 625 + + Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 46 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] + 400 Multi-aperture cores are used in suppression applications and in balun (balance-unbalance) and other broadband transformers. They are also employed in airbag designs to prevent accidental activation. • All multi-aperture cores are supplied burnished. • Multi-aperture cores in 73 and 43 materials are controlled for impedance only. The 61 NiZn material is controlled for both impedance and AL value. The high frequency 67 material is controlled for AL value. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. • Multi-aperture cores in 73 and 43 material are measured for impedance on the 4193A Vector Impedance Analyzer. The 61 and 67 multi-aperture cores are tested on the 4291A Impedance Analyzer. All impedance measurements are performed with a single turn to both holes, using the shortest practical wire length. • The 61 and 67 material multi-hole beads are tested for AL value. The test frequency is 10 kHz at < 10 gauss. The test winding is five turns wound through both holes. • Performance curves for these suppression components are on our web site. • For any multi-aperture requirement not listed here, feel free to contact our customer service group for availability and pricing. • Our "Multi-Aperture Core Kit" (part number 0199000036) is available for prototype evaluation. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade last digit 2 = burnished. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 47 Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Suppression Applications for Lower Frequencies < 50 MHz (73 material) Part Number Fig. 2873002302 1 2873002702 1 2873002402 1 2873001802 2 2873001702 2 2873001502 1 2873000302 1 2873000102 1 2873000202 1 2873006802 1 A 3.45 ±0.25 0.136 7.00 ±0.25 0.276 7.00 ±0.25 0.276 6.35 ±0.25 0.250 6.35 ±0.25 0.250 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 B 2.35 ±0.25 0.093 3.10 ±0.25 0.122 6.20 ±0.25 0.244 6.15 ±0.25 0.242 12.00 ±0.35 0.471 6.60 ±0.25 0.260 10.30 ±0.30 0.407 13.40 ±0.30 0.528 14.35 ±0.50 0.565 27.00 ±0.75 1.062 C 2.00 ±0.15 0.079 4.20 -0.25 0.160 4.20 -0.25 0.160 _ _ 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 E H 1.45 ±0.10 0.057 2.90 ±0.10 0.114 2.90 ±0.10 0.114 2.75 ±0.20 0.108 2.75 ±0.20 0.108 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 0.75 +0.25 0.034 1.70 +0.20 0.071 1.70 +0.20 0.071 1.10 +0.30 0.050 1.10 +0.30 0.050 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 Wt. (g) Impedance (Ω) 10 25 MHz + MHz 0.10 35 44 0.30 28 38 0.50 80 75 0.80 115 106 1.60 200 200 1.70 57 50 2.60 94 75 3.50 127 93 3.70 125 106 7.00 195 180 Suppression Applications for Broadband Frequencies 20-300 MHz (43 material) Part Number Fig. 2843002302 1 2843002702 1 2843002402 1 2843001802 2 2843001502 1 2843000302 1 2843000102 1 2843000202 1 2843006802 1 2843010402 3 2843010302 3 2843009902 3 A 3.45 ±0.25 0.136 7.00 ±0.25 0.276 7.00 ±0.25 0.276 6.35 ±0.25 0.250 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 19.45 ±0.40 0.765 19.45 ±0.40 0.765 28.70 ±0.60 1.130 B 2.35 ±0.25 0.093 3.10 ±0.25 0.122 6.20 ±0.25 0.244 6.15 ±0.25 0.242 6.60 ±0.25 0.260 10.30 ±0.30 0.407 13.40 ±0.30 0.528 14.35 ±0.50 0.565 27.00 ±0.75 1.062 12.70 ±0.50 0.500 25.40 ±0.70 1.000 28.70 ±0.70 1.130 C 2.00 ±0.15 0.079 4.20 -0.25 0.160 4.20 -0.25 0.160 _ 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 9.50 ±0.25 0.375 9.50 ±0.25 0.375 14.25 ±0.30 0.560 E H 1.45 ±0.10 0.057 2.90 ±0.10 0.114 2.90 ±0.10 0.114 2.75 ±0.20 0.108 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 9.90 ±0.25 0.390 9.90 ±0.25 0.390 14.00 ±0.30 0.550 0.75 +0.25 0.034 1.70 +0.20 0.071 1.70 +0.20 0.071 1.10 +0.30 0.050 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 4.75 ±0.20 0.187 4.75 ±0.20 0.187 6.35 ±0.15 0.250 Wt. (g) Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E MHz + MHz 0.10 29 44 0.30 37 50 0.50 74 100 0.80 100 131 1.70 59 88 2.60 104 130 3.50 122 175 3.70 123 180 7.00 219 300 7.50 135 200 18.00 295 400 48.00 380 500 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 48 Impedance (Ω) 25 100 Web: www.fair-rite.com -mail: [email protected] Suppression Applications for Higher Frequencies > 250 MHz (61 material) Broadband and Inductive Designs 1- 40 MHz (61 material) Part Number Fig. 2861002302 1 2861002702 1 2861002402 1 2861001702 2 2861001502 1 2861000302 1 2861000102 1 2861000202 1 2861006802 1 2861010002 3 A B 3.45 ±0.25 0.136 7.00 ±0.25 0.276 7.00 ±0.25 0.276 6.35 ±0.25 0.250 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 30.20 ±0.60 1.190 C 2.35 ±0.25 0.093 3.10 ±0.25 0.122 6.20 ±0.25 0.244 12.00 ±0.35 0.471 6.60 ±0.25 0.260 10.30 ±0.30 0.407 13.40 ±0.30 0.528 14.35 ±0.50 0.565 27.00 ±0.75 1.062 28.70 ±0.70 1.130 E 2.00 ±0.15 0.079 4.20 -0.25 0.160 4.20 -0.25 0.160 _ H 1.45 ±0.10 0.057 2.90 ±0.10 0.114 2.90 ±0.10 0.114 2.75 ±0.20 0.108 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 14.60 ±0.40 0.575 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 15.00 ±0.40 0.590 0.75 +0.25 0.034 1.70 +0.20 0.071 1.70 +0.20 0.071 1.10 +0.30 0.050 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 6.80 ±0.2 0.268 Wt. (g) Impedance (Ω) 100 250 AL(nH) + MHz MHz 0.10 35 48 60 Min 0.30 44 63 80 Min 0.50 80 118 160 Min 1.60 210 275 440 Min 1.70 90 115 145 Min 2.60 150 200 230 Min 3.50 160 225 300 Min 3.70 150 190 320 Min 7.00 300 425 600 Min 46.00 510 625 800 Min Broadband and Inductive Designs 10-100 MHz (67 material) Part Number Fig. A B C E H Wt. (g) AL(nH) 2867002302 1 0.50 48 Min 2867001502 1 1.70 44 Min 2867000302 1 2.60 68 Min 2867000102 1 3.50 89 Min 2867006802 1 0.75 +0.25 0.034 1.70 +0.20 0.071 1.70 +0.20 0.071 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 3.80 ±0.25 0.150 24 Min 1 1.45 ±0.10 0.057 2.90 ±0.10 0.114 2.90 ±0.10 0.114 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 5.70 ±0.25 0.225 0.30 2867002402 2.00 ±0.15 0.079 4.20 -0.25 0.160 4.20 -0.25 0.160 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 7.50 ±0.35 0.295 18 Min 1 2.35 ±0.25 0.093 3.10 ±0.25 0.122 6.20 ±0.25 0.244 6.60 ±0.25 0.260 10.30 ±0.30 0.407 13.40 ±0.30 0.528 27.00 ±0.75 1.062 0.10 2867002702 3.45 ±0.25 0.136 7.00 ±0.25 0.276 7.00 ±0.25 0.276 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 13.30 ±0.60 0.525 7.00 180 Min Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 49 Surface mount beads are available from Fair-Rite in several materials and sizes. Their rugged construction lowers the dc resistance and increases current carrying capacity compared to plated beads. • SM Beads on 12 mm tape width are supplied taped and reeled per EIA 481-1 and IEC 60286-3 standards. SM Beads on 16 and 24 mm tape widths are supplied taped and reeled per EIA 481-2 and IEC 60286-3 standards. Taped and reeled parts are supplied on a 13" reel. • SM Beads can also be supplied not taped and reeled and then are bulk packed. This packing method will change the last digit of the part number to a "6". • Wires are oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating. • SM Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. After dipping the mounting site of the bead, the solder surface shall be at least 95% covered with a smooth solder coating. The edges of the copper strip are not specified as solderable surfaces. • After preheating the beads to within 100 oC of the soldering temperature, the parts meet the resistance to soldering requirements of EIA-186-10E, temperature 260 ±5 oC and time 10 ±1 seconds. • Suggested land patterns are in accordance with the latest revision of IPC-7351. • SM Beads are controlled for impedance limits only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed value less 20%. SM Beads in 73, 43 and 44 materials are measured for impedance on the 4193 Vector Impedance Analyzer. The 52 and 61 SM Beads are tested for impedance on the 4291A RF Impedance Analyzer. • Recommended storage and operation temperature is -55 oC to 125 oC. • The maximum practical current rating for these SM Beads is 5 amps, check the component bias curves. The 019/021/037 and 044 SM Beads can withstand a continuous current of 10 amps resulting in a component temperature rise < 40 oC • Performance curves for these suppression components are on our web site. • For any SM Bead requirement not listed, please contact our customer service group for availability and pricing. • Our "Surface Mount Bead Kit" (part number 0199000025) is available for prototype evaluation. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 50 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 51 Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Lower Frequencies < 50 MHz (73 material) Reel Information Tape Pitch Parts Width mm 13" mm Reel Row # Part Number Fig. A B C D Wt. (g) (1) 2773019447 1 2800 0.15 - - - (3) 2773021447 1 0.30 16 8 2800 (4) 2773021446 1 0.30 - - - (5) 2773037447 1 0.45 16 8 2800 (6) 2773037446 1 0.45 - - - (7) 2773044447 1 0.09 12 8 4500 (8) 2773044446 1 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.40 ±0.40 0.055 1.40 ±0.40 0.055 1.55 ±0.50 0.061 1.55 ±0.50 0.061 8 1 5.10 -0.85 0.184 5.10 -0.85 0.184 9.60 -0.95 0.359 9.60 -0.95 0.359 9.25 -0.70 0.350 9.25 -0.70 0.350 5.65 ±0.45 0.222 5.65 ±0.45 0.222 12 2773019446 3.05 ±0.10 0.120 3.05 ±0.10 0.120 3.05 ±0.10 0.120 3.05 ±0.10 0.120 4.60 ±0.20 0.181 4.60 ±0.20 0.181 3.10 ±0.10 0.122 3.10 ±0.10 0.122 0.15 (2) 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.70 ±0.20 0.106 2.70 ±0.20 0.106 1.75 Max 0.068 Max 1.75 Max 0.068 Max 0.09 - - - Land Patterns X Y Z Table Continued ... 1 Impedance (Ω) 5 10 Row # Part Number Max Rdc (mΩ) V W (ref) MHz MHz MHz MHz (1) 2773019447 12 25 31 40 0.80 31 40 0.80 50 60 78 1.20 25 50 60 78 1.20 2773037447 25 50 60 78 1.20 (6) 2773037446 25 50 60 78 1.20 (7) 2773044447 9 19 25 33 1.10 (8) 2773044446 9 19 25 33 1.10 1.00 0.040 1.00 0.040 4.50 0.177 4.50 0.177 5.00 0.197 5.00 0.197 1.50 0.059 1.50 0.059 4.00 0.157 4.00 0.157 7.50 0.295 7.50 0.295 8.00 0.315 8.00 0.315 4.50 0.177 4.50 0.177 (2) 2773019446 12 25 (3) 2773021447 25 (4) 2773021446 (5) + 25 + 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 52 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 _ _ _ _ _ _ _ _ Broadband Frequencies 25-300 MHz (43 & 44 materials) Reel Information Tape Pitch Parts Width mm 13" mm Reel Row # Part Number Fig. A B C D E Wt. (g) (9) 2743019447 1 8 2800 _ 0.15 - - - (11) 2743021447 1 _ 0.30 16 8 2800 (12) 2743021446 1 _ 0.30 - - - (13) 2743037447 1 _ 0.45 16 8 2800 (14) 2743037446 1 _ 0.45 - - - (15) 2744044447 1 _ 0.09 12 8 4500 (16) 2744044446 1 _ 0.09 - - - (17) 2744040447 2 12 8 4000 2744040446 2 0.14 - - - (19) 2744555567 4 1.27 ±0.05 0.050 1.27 ±0.05 0.050 _ 0.14 (18) 0.96 24 12 1500 (20) 2744555566 4 _ 0.96 - - - (21) 2744555577 3 _ 0.96 24 12 1500 (22) 2744555576 3 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.40 ±0.40 0.055 1.40 ±0.40 0.055 1.55 ±0.50 0.061 1.55 ±0.50 0.061 1.40 ±0.40 0.055 1.40 ±0.40 0.055 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 12 1 5.10 -0.85 0.184 5.10 -0.85 0.184 9.60 -0.95 0.359 9.60 -0.95 0.359 9.25 -0.70 0.350 9.25 -0.70 0.350 5.65 ±0.45 0.222 5.65 ±0.45 0.222 6.40 -0.60 0.240 6.40 -0.60 0.240 11.00 Max 0.433 Max 11.00 Max 0.433 Max 11.00 Max 0.433 Max 11.00 Max 0.433 Max 0.15 2743019446 3.05 ±0.10 0.120 3.05 ±0.10 0.120 3.05 ±0.10 0.120 3.05 ±0.10 0.120 4.60 ±0.20 0.181 4.60 ±0.20 0.181 3.10 ±0.10 0.122 3.10 ±0.10 0.122 4.50 ±0.20 0.177 4.50 ±0.20 0.177 5.00 ±0.25 0.197 5.00 ±0.25 0.197 5.00 ±0.25 0.197 5.00 ±0.25 0.197 _ (10) 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.70 ±0.20 0.106 2.70 ±0.20 0.106 1.75 Max 0.068 Max 1.75 Max 0.068 Max 1.95 Max 0.076 Max 1.95 Max 0.076 Max 5.00 Max 0.197 Max 5.00 Max 0.197 Max 5.00 Max 0.197 Max 5.00 Max 0.197 Max _ 0.96 - - - Table Continued ... Row # Part Number (9) 2743019447 (10) 10 MHz Impedance (Ω) 25 100 + + 250 MHz Land Patterns X Y Max Rdc (mΩ) V W (ref) 1.00 0.040 1.00 0.040 4.50 0.177 4.50 0.177 5.00 0.197 5.00 0.197 1.50 0.059 1.50 0.059 1.80 0.071 1.80 0.071 2.00 0.079 4.00 0.157 4.00 0.157 7.50 0.295 7.50 0.295 8.00 0.315 8.00 0.315 4.50 0.177 4.50 0.177 4.80 0.189 4.80 0.189 7.00 0.276 MHz MHz 18 29 47 49 0.80 2743019446 18 29 47 49 0.80 (11) 2743021447 37 56 95 100 1.20 (12) 2743021446 37 56 95 100 1.20 (13) 2743037447 37 56 95 100 1.20 (14) 2743037446 37 56 95 100 1.20 (15) 2744044447 13 21 36 39 1.10 (16) 2744044446 13 21 36 39 1.10 (17) 2744040447 18 29 56 60 1.60 (18) 2744040446 18 29 56 60 1.60 (19) 2744555567 150 250 375 385 3.80 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 0.80 0.032 0.80 0.032 2.00 0.079 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 5.00 0.197 Z _ _ _ _ _ _ _ _ 1.27 0.050 1.27 0.050 _ Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 53 Table Continued ... Impedance (Ω) 25 100 Row # Part Number 10 MHz MHz MHz MHz (20) 2744555566 150 250 375 (21) 2744555577 255 425 (22) 2744555576 255 425 + Land Patterns X Y Max Rdc (mΩ) V W (ref) 385 3.80 600 575 6.20 600 575 6.20 2.00 0.079 2.00 0.079 2.00 0.079 7.00 0.276 7.00 0.276 7.00 0.276 + 250 2.00 0.079 2.00 0.079 2.00 0.079 5.00 0.197 5.00 0.197 5.00 0.197 Z _ _ _ Higher Frequencies 250-1000 MHz (52 & 61 materials) Reel Information Tape Pitch Parts Width mm 13" mm Reel Row # Part Number Fig. A B C D Wt. (g) (23) 2761019447 1 2800 0.15 - - - (25) 2761021447 1 0.30 16 8 2800 (26) 2761021446 1 0.30 - - - (27) 2752555567 4 0.96 24 12 1500 (28) 2752555566 4 0.96 - - - (29) 2752555577 3 0.96 24 12 1500 (30) 2752555576 3 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.50 ±0.50 0.059 1.50 ±0.50 0.059 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 8 1 5.10 -0.85 0.184 5.10 -0.85 0.184 9.60 -0.95 0.359 9.60 -0.95 0.359 11.00 Max 0.433 Max 11.00 Max 0.433 Max 11.00 Max 0.433 Max 11.00 Max 0.433 Max 12 2761019446 3.05 ±0.10 0.120 3.05 ±0.10 0.120 3.05 ±0.10 0.120 3.05 ±0.10 0.120 5.00 ±0.25 0.197 5.00 ±0.25 0.197 5.00 ±0.25 0.197 5.00 ±0.25 0.197 0.15 (24) 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 5.00 Max 0.197 Max 5.00 Max 0.197 Max 5.00 Max 0.197 Max 5.00 Max 0.197 Max 0.96 - - - Land Patterns X Y Z Table Continued ... Impedance (Ω) 250 500 1000 MHz MHz MHz 50 55 36 50 2761021447 69 (26) 2761021446 (27) Row # Part Number 100 Max Rdc (mΩ) V W (ref) (23) 2761019447 36 59 0.80 55 59 0.80 94 106 118 1.20 69 94 106 118 1.20 2752555567 400 490 425 250 3.80 (28) 2752555566 400 490 425 250 3.80 (29) 2752555577 700 770 440 250 6.20 (30) 2752555576 700 770 440 250 6.20 1.00 0.040 1.00 0.040 4.50 0.177 4.50 0.177 2.00 0.079 2.00 0.079 2.00 0.079 2.00 0.079 4.00 0.157 4.00 0.157 7.50 0.295 7.50 0.295 7.00 0.276 7.00 0.276 7.00 0.276 7.00 0.276 (24) 2761019446 (25) MHz + + 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 2.00 0.079 2.00 0.079 2.00 0.079 2.00 0.079 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 54 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 5.00 0.197 5.00 0.197 5.00 0.197 5.00 0.197 _ _ _ _ _ _ _ _ Surface mount common-mode beads are available from Fair-Rite in several materials and sizes. The common-mode bead provides a common magnetic path for the flux generated by the current to the load and the return current from the load. The current compensation results in zero magnetic flux in the bead. • SM Beads on 12 mm tape width are supplied taped and reeled per EIA 481-1 and IEC 60286-3 standards. SM Beads on 16 and 24 mm tape widths are supplied taped and reeled per EIA 481-2 and IEC 60286-3 standards. Taped and reeled parts are supplied on a 13" reel. • SM Beads can also be supplied not taped and reeled and then are bulk packed. This packing method will change the last digit of the part number to a "6". • Wires are oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating. • SM Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. After dipping the mounting site of the bead, the solder surface shall be at least 95% covered with a smooth solder coating. The edges of the copper strip are not specified as solderable surfaces. • After preheating the beads to within 100 oC of the soldering temperature, the parts meet the resistance to soldering requirements of EIA-186-10E, temperature 260±5 oC and time 10±1 seconds. • Suggested land patterns are in accordance with the latest revision of IPC-7351. • SM Beads are controlled for impedance limits only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed value less 20%. SM Beads in 44 materials are measured for impedance on the 4193 Vector Impedance Analyzer. The 52 SM Beads are tested for impedance on the 4291A RF Impedance Analyzer. • Recommended storage and operation temperature is -55 oC to 125 oC. • The maximum current rating for these SM Beads is 5 amps. • Performance curves for these suppression components are our web site. • For any SM Bead requirement not listed, please contact our customer service group for availability and pricing. • Our "Surface Mount Bead Kit" (part number 0199000025) is available for prototype evaluation. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 55 Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Broadband Frequencies 10-300 MHz (44 material) Reel Information Tape Pitch Parts Width mm 13" mm Reel Row # Part Number Fig. A B C D E Wt. (g) (1) 2744041447 1 0.30 - - - 2744045447 1 0.53 16 8 2400 (4) 2744045446 1 0.53 - - - (5) 2744051447 2 1.00 24 12 1000 (6) 2744051446 2 1.00 - - - (7) 2744065447 2 1.80 24 12 1000 (8) 2744065446 2 2.54 ±0.25 0.100 2.54 ±0.25 0.100 2.54 ±0.25 0.100 2.54 ±0.25 0.100 3.00 ±0.10 0.118 3.00 ±0.10 0.118 3.00 ±0.10 0.118 3.00 ±0.10 0.118 2400 (3) 1.35 ±0.50 0.053 1.35 ±0.50 0.053 1.35 ±0.50 0.053 1.35 ±0.50 0.053 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 8 1 5.00 -0.60 0.185 5.00 -0.60 0.185 8.90 -0.80 0.335 8.90 -0.80 0.335 12.00 Max 0.472 Max 12.00 Max 0.472 Max 14.80 Max 0.582 Max 14.80 Max 0.582 Max 12 2744041446 5.60 ±0.20 0.220 5.60 ±0.20 0.220 5.60 ±0.20 0.220 5.60 ±0.20 0.220 6.65 Max 0.262 Max 6.65 Max 0.262 Max 7.00 Max 0.275 Max 7.00 Max 0.275 Max 0.30 (2) 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 4.50 Max 0.177 Max 4.50 Max 0.177 Max 5.30 Max 0.209 Max 5.30 Max 0.209 Max 1.80 - - - Table Continued ... Row # Part Number (1) 2744041447 12 (2) 2744041446 (3) Impedance (Ω) 100 250 10 25 Max Rdc (mΩ) V MHz MHz MHz MHz MHz 20 33 41 _ 1.10 41 _ 1.10 60 78 _ 1.40 38 60 78 _ 1.40 60 100 230 _ 275 4.00 2744051446 60 100 230 _ 275 4.00 (7) 2744065447 95 145 255 _ 315 4.10 (8) 2744065446 95 145 255 _ 315 4.10 1.00 0.040 1.00 0.040 4.00 0.158 4.00 0.158 4.00 0.158 4.00 0.158 6.80 0.268 6.80 0.268 12 20 33 2744045447 23 38 (4) 2744045446 23 (5) 2744051447 (6) + + 300 Land Patterns X Y W (ref) 4.00 0.158 4.00 0.158 7.00 0.276 7.00 0.276 9.00 0.354 9.00 0.354 11.80 0.465 11.80 0.465 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.00 0.040 1.00 0.040 1.10 0.043 1.10 0.043 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 56 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 5.00 0.197 5.00 0.197 5.00 0.197 5.00 0.197 Z 2.54 0.100 2.54 0.100 2.54 0.100 2.54 0.100 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 Higher Frequencies 250-1000 MHz (52 material) Reel Information Tape Pitch Parts Width mm 13" mm Reel Row # Part Number Fig. A B C D E Wt. (g) (9) 2752041447 1 0.30 - - - 2752045447 1 0.53 16 8 2400 (12) 2752045446 1 0.53 - - - (13) 2752051447 2 1.00 24 12 1000 (14) 2752051446 2 1.00 - - - (15) 2752065447 2 1.80 24 12 1000 (16) 2752065446 2 2.54 ±0.25 0.100 2.54 ±0.25 0.100 2.54 ±0.25 0.100 2.54 ±0.25 0.100 3.00 ±0.10 0.118 3.00 ±0.10 0.118 3.00 ±0.10 0.118 3.00 ±0.10 0.118 2400 (11) 1.35 ±0.50 0.053 1.35 ±0.50 0.053 1.35 ±0.50 0.053 1.35 ±0.50 0.053 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 2.50 ±0.50 0.098 8 1 5.00 -0.60 0.185 5.00 -0.60 0.185 8.90 -0.80 0.335 8.90 -0.80 0.335 12.00 Max 0.472 Max 12.00 Max 0.472 Max 14.80 Max 0.582 Max 14.80 Max 0.582 Max 12 2752041446 5.60 ±0.20 0.220 5.60 ±0.20 0.220 5.60 ±0.20 0.220 5.60 ±0.20 0.220 6.65 Max 0.262 Max 6.65 Max 0.262 Max 7.00 Max 0.275 Max 7.00 Max 0.275 Max 0.30 (10) 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 2.85 ±0.20 0.112 4.50 Max 0.177 Max 4.50 Max 0.177 Max 5.30 Max 0.209 Max 5.30 Max 0.209 Max 1.80 - - - Table Continued ... Impedance (Ω) 250 500 1000 MHz MHz MHz 50 60 30 50 2752045447 58 (12) 2752045446 (13) Row # Part Number 100 Max Rdc (mΩ) V W (ref) (9) 2752041447 30 70 1.10 60 70 1.10 90 115 130 1.40 58 90 115 130 1.40 2752051447 200 330 340 350 4.00 (14) 2752051446 200 330 340 350 4.00 (15) 2752065447 230 380 450 380 4.10 (16) 2752065446 230 380 450 380 4.10 1.00 0.040 1.00 0.040 4.00 0.158 4.00 0.158 4.00 0.158 4.00 0.158 6.80 0.268 6.80 0.268 4.00 0.158 4.00 0.158 7.00 0.276 7.00 0.276 9.00 0.354 9.00 0.354 11.80 0.465 11.80 0.465 (10) 2752041446 (11) MHz + + Land Patterns X Y 1.80 0.071 1.80 0.071 1.80 0.071 1.80 0.071 1.00 0.040 1.00 0.040 1.10 0.043 1.10 0.043 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 5.00 0.197 5.00 0.197 5.00 0.197 5.00 0.197 Z 2.54 0.100 2.54 0.100 2.54 0.100 2.54 0.100 3.00 0.118 3.00 0.118 3.00 0.118 3.00 0.118 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 57 Fair-Rite offers a broad selection of cost effective multi-layer chip beads to suppress conducted EMI signals. Chip beads can be used in an array of devices such as cellular phones, computers, laptops, pagers, etc. The small package sizes accommodate automated placements and allow for a dense packaging of circuit boards. Chip beads are 100% tested for impedance and dc resistance. They are available in standard, high and GHz signal speeds. The multi-layer chip beads are organized by increasing package size and current carrying capacity. • All multi-layer chip beads are supplied taped and reeled, if required bulk packed chip beads can be provided. • The impedance values listed are typical values. The nominal impedance with a +/- 25% tolerance is specified for the + marked 100 MHz. Chip beads are measured for impedance on the HP 4291A and fixture HP 16192A. • Chip beads have plated contacts, 100% matte tin over a nickel undercoating. They can accommodate both reflow and wave soldering technologies. • The suggested land patterns are in accordance to the latest revision of IPC-7351. • Recommended storage and operating temperature range is -55 oC to 125 oC. • Performance curves for these suppression components are our web site. • Our “Chip Bead Kit” (part number 0199000018) is available for prototype evaluation. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 58 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 59 Legend Chip Beads are listed in ascending order by current, package size, impedance and signal speed. + Test frequency Low Current Part Number 2504021007Y0 2504026007Y0 2504021217Y0 2504023017Y0 2504026017Y0 2506033007Y0 2506036007Y0 2506038007Y0 2506031017Y0 2506031217Y0 2506031517Y0 2506033017Y0 2506036017Y0 2506031027Y0 2506036007Z0 2506031217Z0 2506033017Z0 2506030707H0 2506031007H0 2506031217H0 2506032217H0 2506033317H0 2506031027H0 2508051107Y0 2508053007Y0 2508055007Y0 Pkg. Size 0402 (1005) 0402 (1005) 0402 (1005) 0402 (1005) 0402 (1005) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0603 (1608) 0805 (2012) 0805 (2012) 0805 (2012) 50 100 MHz MHz + Impedance (Ω) 500 1000 MHz MHz 1000 + MHz Signal Speed Max DCR (Ω) Max Current (mA) 8 10 ±25% 13 14 - Standard 0.050 500 48 60 ±25% 79 79 - Standard 0.400 200 88 120 ±25% 170 157 - Standard 0.500 200 234 300 ±25% 370 264 - Standard 0.750 100 421 600 ±25% 652 362 - Standard 1.100 50 23 30 ±25% 46 48 - Standard 0.100 400 45 60 ±25% 94 82 - Standard 0.150 400 59 80 ±25% 121 102 - Standard 0.150 400 77 100 ±25% 144 131 - Standard 0.150 400 90 120 ±25% 179 142 - Standard 0.150 400 109 150 ±25% 224 179 - Standard 0.150 400 213 300 ±25% 326 205 - Standard 0.300 400 426 600 ±25% 405 226 - Standard 0.350 400 653 1000 ±25% 241 110 - Standard 0.550 300 28 60 ±25% 145 96 - High 0.250 450 60 120 ±25% 278 192 - High 0.300 450 112 300 ±25% 314 142 - High 0.350 450 4 7 ±25% 30 38 - GHz 0.100 900 5 10 ±25% 43 50 - GHz 0.100 900 50 120 ±25% 600 - 500 ±40% GHz 0.500 200 100 220 ±25% 800 - 1100 ±40% GHz 0.800 100 150 330 ±25% 1300 - 1300 ±40% GHz 1.200 50 500 1000 ±25% 1800 - 1200 GHz 1.500 50 8 11 ±25% 16 16 - Standard 0.100 300 22 30 ±25% 46 49 - Standard 0.100 300 36 50 ±25% 73 76 - Standard 0.150 300 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 60 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Low Current Part Number 2508056007Y0 2508059007Y0 2508051017Y0 2508051217Y0 2508051817Y0 2508053017Y0 2508056017Y0 2508051027Y0 2508051527Y0 2508056007Z0 2508051217Z0 2508053017Z0 2508052027Z0 2512063007Y0 2512065007Y0 2512067007Y0 2512069007Y0 2512061017Y0 2512061217Y0 2512063017Y0 2512066017Y0 2512061027Y0 2512061527Y0 2518061017Y0 2518061517Y0 Pkg. Size 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1806 (4516) 1806 (4516) 50 100 MHz MHz + Impedance (Ω) 500 1000 MHz MHz 1000 + MHz Signal Speed Max DCR (Ω) Max Current (mA) 45 60 ±25% 88 89 - Standard 0.150 300 68 90 ±25% 125 107 - Standard 0.150 300 75 100 ±25% 134 120 - Standard 0.200 300 89 120 ±25% 172 127 - Standard 0.200 300 134 180 ±25% 198 111 - Standard 0.200 300 216 300 ±25% 161 84 - Standard 0.250 300 428 600 ±25% 284 141 - Standard 0.350 300 688 1000 ±25% 300 148 - Standard 0.450 300 989 1500 ±25% 235 118 - Standard 0.700 300 28 60 ±25% 111 122 - High 0.150 300 45 120 ±25% 253 191 - High 0.200 300 118 300 ±25% 280 139 - High 0.250 200 440 2000 ±25% 160 80 - High 0.400 200 21 30 ±25% 49 52 - Standard 0.100 800 38 50 ±25% 68 67 - Standard 0.150 800 53 70 ±25% 101 102 - Standard 0.150 500 72 90 ±25% 121 113 - Standard 0.150 450 72 100 ±25% 127 86 - Standard 0.200 450 87 120 ±25% 151 109 - Standard 0.200 450 203 300 ±25% 233 118 - Standard 0.200 350 581 600 ±25% 116 67 - Standard 0.250 350 784 1000 ±25% 230 117 - Standard 0.350 350 1600 1500 ±25% 120 25 - Standard 0.400 350 73 100 ±25% 153 155 - Standard 0.300 400 110 150 ±25% 205 167 - Standard 0.500 200 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 61 Medium Current Part Number 2506033007Y3 2506036007Y3 2506031217Y2 2508053007Y3 2508056007Y3 2508051217Y3 2508053017Y3 2508056017Y2 2508051027Y1 2508052027Y1 2512063007Y3 2512065007Y3 2512067007Y3 2512061517Y3 2512063017Y3 2512066017Y1 2512061027Y1 2518066007Y3 2518068007Y3 2518127007Y3 2518121217Y3 Pkg. Size 0603 (1608) 0603 (1608) 0603 (1608) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 0805 (2012) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1806 (4516) 1806 (4516) 1812 (4532) 1812 (4532) 50 MHz Impedance (Ω) 100 500 + MHz 1000 MHz MHz Signal Speed Max DCR (Ω) Max Current (mA) 23 30 ±25% 40 41 Standard 0.040 3000 48 60 ±25% 84 81 Standard 0.040 3000 90 120 ±25% 170 152 Standard 0.050 2000 23 30 ±25% 41 41 Standard 0.030 3000 49 60 ±25% 84 84 Standard 0.040 3000 91 120 ±25% 165 135 Standard 0.050 3000 239 300 ±25% 218 117 Standard 0.050 3000 449 600 ±25% 293 159 Standard 0.100 2000 764 1000 ±25% 402 216 Standard 0.300 1000 599 2000 ±25% 350 189 Standard 0.300 1000 24 30 ±25% 40 38 Standard 0.030 3000 39 50 ±25% 69 70 Standard 0.030 3000 53 70 ±25% 102 103 Standard 0.040 3000 120 150 ±25% 173 130 Standard 0.050 3000 212 300 ±25% 150 88 Standard 0.060 3000 460 600 ±25% 260 120 Standard 0.200 1000 925 1000 ±25% 210 117 Standard 0.300 1000 44 60 ±25% 91 94 Standard 0.040 3000 64 80 ±25% 114 114 Standard 0.040 3000 54 70 ±25% 96 96 Standard 0.040 3000 92 120 ±25% 150 106 Standard 0.040 3000 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 62 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] High Current Part Number 2508056007Y6 2508051217Y6 2512065007Y6 2512061217Y5 2518065007Y6 2518061017Y6 2518121217Y6 Pkg. Size 0805 (2012) 0805 (2012) 1206 (3216) 1206 (3216) 1806 (4516) 1806 (4516) 1812 (4532) 50 MHz Impedance (Ω) 100 500 + MHz 1000 MHz MHz Signal Speed Max DCR (Ω) Max Current (mA) 47 60 ±25% 88 68 Standard 0.020 6000 94 120 ±25% 158 132 Standard 0.025 6000 39 50 ±25% 68 56 Standard 0.008 6000 96 120 ±25% 137 91 Standard 0.025 5000 36 50 ±25% 63 61 Standard 0.010 6000 75 100 ±25% 139 132 Standard 0.020 6000 92 120 ±25% 149 105 Standard 0.020 6000 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 63 Fair-Rite offers an effective cost and real estate reduction by our line of chip arrays. Four chip beads, packaged in a 1206 (3216) size, for suppression of conducted EMI where size is at a premium. Chip arrays are 100% tested for impedance and dc resistance. • Chip arrays have plated contacts, 100% matte tin over a nickel undercoating. • Chip arrays are supplied taped and reeled. • Chip arrays are controlled for impedance. The impedance values listed are typical values. The nominal impedance with a +/- 25% tolerance is specified for the + marked 100 MHz frequency. Chip arrays are measured for impedance on the HP 4291A and fixture HP 16192A. • The arrays can accommodate both reflow and wave soldering technologies. • Suggested land patterns are in accordance to the IPC-7351. • Recommended storage and operating temperature range is -55 oC to 125 oC. • Performance curves for these suppression components are on our web site. • “Chip Bead Kit” (part number 0199000018) contains the 600 ohm 4 line chip array. • The maximum voltage between adjacent beads is 5V. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 64 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency 0.45 ± 0.2 0.018 Standard Signal Speed Part Number 2512066007Y0A4 2512061217Y0A4 2512063017Y0A4 2512066017Y0A4 2512061027Y0A4 Pkg. Size 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 1206 (3216) 50 MHz Impedance (Ω) 100 500 + MHz 1000 MHz MHz Max DCR (Ω) Max Current (mA) 48 60 ±25% 77 75 0.250 200 95 120 ±25% 150 118 0.300 150 225 300 ±25% 280 160 0.300 150 460 600 ±25% 400 205 0.500 100 770 1000 ±25% 400 200 0.700 50 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 65 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 66 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Expanded Cable & Suppressor Kit Part Number Kit Description 0199000005 Contains a broad sampling of suppression cores to reduce conducted EMI over wires and cables. Round Cable Cores 31 Matl (1-300 MHz) 2631102002 2631540002 2631665702 Qty Round Cable Cores 43 Matl (25-300 MHz) 2643626502 2643801002 2643802702 Qty Round Cable Cores 46 Matl (25-300 MHz) 2646102002 2646540002 2646625002 2646625102 2646665702 2646665802 2646803802 2646804502 Qty 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Round Cable Cores 61 Matl (200-1000 MHz) 2661102002 2661540002 2661665702 Qty Clips 0199001401 Qty 8 Flat Cable Cores 31 Matl (1-300 MHz) 2631163851 Qty Flat Cable Cores 43 Matl (25-300 MHz) 2643163851 2643163951 2643164051 2643166651 2643166851 Qty 2 2 2 2 2 2 2 2 4 Round Cable Snap-Its 43 Matl (25-300 MHz) 0443178181 Qty Round Cable Snap-Its 46 Matl (25-300 MHz) 0446164151 0446164251 0446167251 Qty Round Cable Snap-Its 61 Matl (200-1000 MHz) 0461164281 0461167281 Qty Flat Cable Snap-Its 43 Matl (25-300 MHz) 0443163951 0443164051 0443166651 Qty 2 2 2 2 2 2 1 1 1 Chip Bead Kit Part Number Kit Description 0199000018 Contains a number of different EIA size chip components with a range of impedance values and signal speeds. Also included is one of our chip arrays. Chip Bead 0402 (1005) 2504026017Y0 Z (Ω) 100 MHz 600 Qty 80 Chip Beads 0805 (2012) Z (Ω) 100 MHz Qty 2508051217Y0 120 300 300 600 2000 60 60 60 60 60 60 60 2508053017Z0 Chip Beads 0603 (1608) Z (Ω) 100 MHz Qty 2508053017Y3 2506031017Y0 2506031217Y0 2506033017Y0 2506036017Y0 2506031007H0 2506031217Y2 100 120 300 600 10 120 75 75 75 75 75 75 2508056017Y2 2508052027Y1 2508056007Y6 Chip Beads 1206 (3216) 2512069007Y0 2512066017Y0 2512061517Y3 2512061027Y1 2512061217Y5 Z (Ω) 100 MHz 90 600 150 1000 120 Qty Chip Bead 1806 (4516) 2518065007Y6 Z (Ω) 100 MHz 50 Qty Chip Array 1206 (3216) Z (Ω) 100 MHz 600 (4) Qty 2512066017Y0A4 50 50 50 50 50 40 40 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 67 Shield Bead Kit Part Number Kit Description 0199000019 Contains 28 different beads in three suppression materials, 73, 43 and 61. 73 Matl (< 50 MHz) Qty 43 Matl (25-300 MHz) Qty 61 Matl (250-1000 MHz) Qty 2673000101 15 15 10 15 25 2661000101 2673000301 2643000101 2643000201 2661000301 10 2673000501 25 2643000301 10 2661000801 5 2673000801 5 2643000501 25 2661021801 10 2673002402 5 2643000801 5 25 10 5 2673004801 2643001301 2661375102 2673021801 5 2643001501 10 2673030101 25 2643002402 5 2643004801 25 2673901301 25 2643021801 10 2643022401 10 2643250402 5 2643300101 5 2643375102 5 Antenna/RFID Kit Part Number Kit Description 0199000024 Contains a range of rods in three low losses, high Q materials, 78, 61 and 67 to cover frequencies from 10 kHz to 50 MHz. 78 Matl (< 200 kHz) Qty 61 Matl (200 kHz-5 MHz) Qty 3078990821 50 3061990821 50 3078990831 25 3061990831 25 3078990841 25 3061990841 25 3078990851 20 3061990851 20 3078990861 15 3061990861 15 3078990871 15 3061990871 15 3078990881 10 3061990881 10 3078990891 8 3061990891 8 3078990901 3078990911 5 3 67 Matl (> 5 MHz) Qty 3067990821 50 3067990831 25 3067990841 25 3067990851 20 3067990861 15 3067990871 15 3067990881 10 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 68 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Surface Mount Bead Kit Part Number Kit Description 0199000025 Contains an assortment of surface mount beads for differential and common-mode applications in 73 material for < 50 MHz, 43/44 material for 25-300 MHZ and 52/61 material for 250-1000 MHz frequencies. 73 Matl (< 50 MHz) Differential Mode Qty 44 Matl (25-300 MHz) Common-Mode Qty 52 Matl (250-1000 MHz) Common-Mode Qty 2773019447 12 2773021447 12 2744041447 12 2752041447 12 2744045447 12 2752045447 12 2744051447 5 2752051447 5 2744065447 5 2752065447 5 43/44 Matl (25-300 MHz) Differential Mode Qty 2743019447 12 2743021447 12 52/61 Matl (250-1000 MHz) Differential Mode Qty 2743037447 12 2744044447 12 2761019447 12 2744555567 5 2761021447 12 2744555577 6 2752555567 5 2752555577 6 Wound Bead Kit Part Number Kit Description 0199000027 Contains twelve wound beads in two suppression materials, 44 and 61, wound in several configurations. 44 Matl (1-200 MHz) 2944666631 2944666651 2944666661 2944666671 2944666681 2944777721 2944777741 Turns 3 2 1½ 2½ 2 x 1½ 2 x 2½ 4½ Qty 8 8 8 8 8 4 4 61 Matl (50-500 MHz) 2961666631 2961666651 2961666661 2961666671 2961666681 Turns 3 2 1½ 2½ 2 x 1½ Qty 8 8 8 8 8 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 69 Bead-on-Lead Kit Part Number Kit Description 0199000028 Contains three parts each in three materials, 73, 43 and 61, for through hole applications. 73 Matl ( < 50 MHz) Qty 43 Matl (25-300 MHz) Qty 61 Matl (250-1000 MHz) Qty 2773001112 15 2743001112 15 2761001112 15 2773002112 15 2743002112 15 2761002112 15 2773009112 15 2743009112 15 2761009112 15 RF Power Rod Kit Part Number Kit Description 0199000029 Contains a selection of rod sizes intended for differential mode high current applications that require high saturation and Curie temperature. 52 Matl Rods 4052077111 4052098411 4052111011 4052155611 4052195211 4052235211 4052251111 Qty 20 20 20 15 8 5 5 OD x Lth (mm) 2.0 x 15.0 2.5 x 15.0 3.0 x 20.0 4.0 x 25.0 5.0 x 25.0 6.0 x 30.0 6.5 x 30.0 77 Matl Rods 4077122011 4077172011 4077296011 4077312911 4077375411 Qty 15 8 5 9 6 OD x Lth (mm) 3.2 x 25.4 4.5 x 22.2 6.4 x 31.8 8.0 x 38.1 9.5 x 41.3 31 Material Snap-It Kit Part Number Kit Description 0199000030 Contains a range of parts for different cable diameters. Suggested operating frequency 1-300 MHz. 31 Matl Snap-It Assemblies (1 - 300 MHz) Qty Max Cable Diameter mm & inches 0431173951 0431164951 0431164281 0431167281 0431164181 0431176451 4 4 4 4 2 1 4.90 - 0.193 4.90 - 0.193 6.30 - 0.250 9.85 - 0.388 12.70 - 0.500 18.00 - 0.709 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 70 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 43 Material Snap-It Kit Part Number Kit Description 0199000031 Contains Snap-It assemblies suitable for the 25-300 MHz frequency range. Can accommodate cable diameters from 0.250 to 0.591 inches. 43 Matl Snap-It Assemblies ( 25-300 MHz) Qty Max Cable Diameter mm & inches 0443164251 0443625006 0443665806 0443167251 0443164151 0443800506 0443806406 2 2 2 2 2 2 2 6.30 - 0.250 7.60 - 0.300 9.20 - 0.362 9.85 - 0.388 12.70 - 0.500 12.80 - 0.504 15.00 - 0.591 46 Material Core and Snap-It Kit Part Number Kit Description 0199000032 Contains a selection of cable cores and Snap-Its in our economical 46 material. This material has similar performance to our 43/44 grade materials over the 25-300 MHz frequency range. 46 Matl (25-300 MHz) Cable Cores Qty Max Cable Diameter mm & inches 2646480002 2646540002 2646625102 2646665702 2646102002 2 2 2 2 2 4.95 - 0.195 6.10 - 0.240 7.65 - 0.300 9.25 - 0.365 12.55 - 0.495 Snap-It Assemblies Qty Max Cable Diameter mm & inches 0446164951 0446164281 0446167281 0446164181 2 2 2 2 4.90 - 0.193 6.30 - 0.250 9.85 - 0.388 12.70 - 0.500 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 71 61 Material Snap-It Kit Part Number Kit Description 0199000033 Contains a selection of 61 material Snap-Its. 61 material is our recommended material for suppressing conducted EMI over the 200-1000 MHz frequency range. 61 Matl Snap-It Assemblies (200 -1000 MHz) Qty Max Cable Diameter mm & inches 0461178181 0461164951 0461164281 0461167281 0461164181 4 4 4 4 2 4.10 - 0.161 4.90 - 0.193 6.30 - 0.250 9.85 - 0.388 12.70 - 0.500 61 & 31 Material Snap-It Kit Part Number Kit Description 0199000017 Contains a range of parts for different cable diameters. Suppressor selection is suitable for high frequency (61 material) and low frequency (31 material) applications. 31 Matl Snap-It Assemblies (1 - 300 MHz) 0431178181 0431164951 0431164281 0431167281 0431164181 0431176451 Qty 1 1 1 1 1 1 61 Matl Snap-It Assemblies (200 - 1000 MHz) 0461178181 0461164951 0461164281 0461167281 0461164181 0461176451 Max Cable Diameter mm & inches 4.10 - 0.161 4.90 - 0.193 6.30 - 0.250 9.85 - 0.388 12.70 - 0.500 18.00 - 0.709 Qty 1 1 1 1 1 1 Max Cable Diameter mm & inches 4.10 - 0.161 4.90 - 0.193 6.30 - 0.250 9.85 - 0.388 12.70 - 0.500 18.00 - 0.709 Multi-Aperture Core Kit Part Number Kit Description 0199000036 Contains five sizes in four materials, 73, 43, 61 and 67. The 73, 43 and 61 material parts are suggested for suppression applications from 1-1000 MHz. The 61 and 67 material parts can be used in HF broadband and inductive designs from 1 MHz to 100 MHz. 73 Material 2873002302 2873002402 2873000302 2873000202 2873006802 Qty 20 12 4 2 2 43 Material 2843002302 2843002402 2843001502 2843000202 2843006802 Qty 20 12 4 2 2 61 Material 2861002302 2861002402 2861001502 2861000202 2861006802 Qty 20 12 4 2 2 67 Material 2867002302 2867002402 2867001502 2867000102 2867006802 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 72 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Qty 20 12 4 2 2 High Frequency Toroid Kit Part Number Kit Description 0199000039 This kit contains a selection of popular toroid sizes in Fair-Rite’s high frequency materials. These materials are of the NiZn type with Curie Temps above 200° C. These materials are suitable for broadband and inductive applications from 1 to over 100 MHz Low Permeability 68 Matl (ui=16) 5968020901 5968000201 5968000301 5968001101 5968001801 5968021001 5968002701 5968003801 Qty 12 12 6 5 6 5 3 3 Low Permeability 67 Matl (ui=40) 5967000101 5967000201 5967000301 5967001101 5967001801 5967001001 5967002701 5967003801 Qty 12 12 6 5 6 5 3 3 Low Permeability 61 Matl (ui=125) 5961000101 5961000201 5961000301 5961001101 5961001801 5961001001 5961002701 5961003801 Qty 12 12 6 5 6 5 3 3 Low Permeability 52 Matl (ui=250) 5952020201 5952020301 5952020401 5952020501 5952020601 5952020701 5952020801 5952003801 Qty 12 12 6 5 6 5 3 3 Flex Circuit & Ribbon Cable Core Kit Part Number Kit Description 0199000038 This kit contains a selection of single piece and split core geometries for flat cables. All parts are of the 43 Material which provides optimal suppression from 25 to 500 MHz. Sizes range for flat cable widths of 8 to 51 mm. Part Number Qty Part Number Qty Part Number Qty Part Number Qty 2643180251 2643178351 2643169552 2643178651 8 8 8 8 2643180351 2643178751 2643180451 2643169351 5 6 16 6 2643180551 2643180651 2643180751 2643180851 6 6 6 12 2643173851 2643166851 2643170951 2643168251 12 6 6 6 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 73 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 74 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite offers a broad selection of ferrite EMI suppression cable cores in several materials with guaranteed minimum impedance specifications. • All cable cores have been burnished to remove the sharp edges. • The column “H” (Oe) gives for each cable core the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application, is this value of “H” times the actual NI (ampere-turns) product. For the effect of the dc bias on the impedance of the core material, see the figures 18-23 in the application note “How to Choose Ferrite Components for EMI Suppression”. • Suppression cable cores are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. • Single turn impedance tests for 31, 43 and 46 material cores are performed on the 4193A Vector Impedance Meter. The 61 material parts are tested on the 4191A RF Impedance Analyzer and 75 material parts are tested on the 4285A LCR Meter. Cores are tested with the shortest practical wire length. • Performance curves for these suppression components are on our web site. • For smaller suppression parts, refer to the section “EMI Suppression Beads”. • For any cable suppression core not listed here, feel free to contact our customer service group for availability and pricing. • The “C” dimension, the core length, can be modified to suit specific applications. • Our “Expanded Cable and Suppressor Kit” (part number 0199000005) contains a selection of these suppression cores. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 2 = burnished. Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Low Frequency 200 kHz - 30 MHz (75 material) Part Number 2675023002 2675540202 2675540002 2675625102 2675665702 A 9.50 ±0.25 0.374 14.30 ±0.45 0.563 14.30 ±0.45 0.563 15.88 ±0.38 0.625 17.40 ±0.40 0.685 B 5.10 ±0.25 0.201 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.90 ±0.40 0.311 9.50 ±0.40 0.374 C 19.00 ±0.45 0.748 13.45 ±0.35 0.530 28.60 ±0.60 1.126 28.60 ±0.60 1.126 28.60 ±0.60 1.126 200 Impedance (Ω) 500 1 2 kHz kHz MHz MHz MHz 0.58 17 43 68 100 96 8.30 0.43 16 39 58 67 52 17.70 0.43 30 80 133 154 95 20.40 0.36 25 60 83 75 50 23.00 0.32 22 56 102 138 85 Wt. (g) H (Oe) 4.60 5 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] 75 Low Frequency 200 kHz - 30 MHz (75 material) Part Number 2675626402 2675102002 2675821502 A 18.70 ±0.50 0.736 25.90 ±0.75 1.020 31.00 ±0.60 1.220 B C 10.15 ±0.40 0.400 12.80 ±0.25 0.504 19.00 ±0.60 0.748 28.60 ±0.60 1.126 28.60 ±0.80 1.126 15.00 ±0.30 0.591 200 Impedance (Ω) 500 1 2 kHz kHz MHz MHz MHz 0.29 25 62 92 97 67 55.00 0.22 30 83 120 70 54 34.00 0.17 11 29.5 43 28 20 Wt. (g) H (Oe) 26.60 5 Lower & Broadband Frequencies 1-300 MHz (31 material) Part Number A B C Wt. (g) H (Oe) 2631250202 6.35 ±0.15 0.250 9.50 ±0.25 0.375 12.30 ±0.40 0.485 12.30 ±0.40 0.485 14.30 ±0.45 0.562 14.30 ±0.45 0.562 16.25 -0.75 0.625 16.25 -0.75 0.625 17.45 ±0.40 0.687 18.70 ±0.50 0.735 18.70 ±0.50 0.735 25.90 ±0.75 1.020 28.50 ±0.60 1.122 29.00 ±0.75 1.142 31.60 ±0.75 1.244 50.80 ±1.30 2.000 61.00 ±1.30 2.400 101.60 ±2.60 4.000 2.95 +0.45 0.125 4.75 +0.30 0.193 4.95 +0.25 0.200 4.95 +0.25 0.200 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.90 ±0.25 0.312 7.90 ±0.25 0.312 9.50 ±0.25 0.375 10.15 ±0.25 0.400 10.15 ±0.25 0.400 12.80 ±0.25 0.505 13.80 ±0.40 0.543 19.00 ±0.50 0.748 19.55 ±0.50 0.770 25.40 ±0.80 1.000 35.55 ±0.85 1.400 76.20 ±2.00 3.000 25.40 ±0.75 1.000 19.05 ±0.70 0.750 12.70 ±0.40 0.500 25.40 ±0.75 1.000 13.80 -0.70 0.530 28.60 ±0.75 1.125 14.30 ±0.35 0.562 28.60 ±0.75 1.125 28.60 ±0.75 1.125 14.65 -0.75 0.562 28.60 ±0.75 1.125 28.60 ±0.80 1.125 28.60 ±0.80 1.125 13.85 ±0.40 0.545 50.80 ±1.00 2.000 38.10 ±0.75 1.500 12.70 ±0.50 0.500 25.40 ±0.70 1.000 2.90 0.91 4.70 2631023002 2631480102 2631480002 2631540202 2631540002 2631625002 2631625102 2631665702 2631626302 2631626402 2631102002 2631101902 2631801202 2631103002 2631626202 2631803802 2631814002 Impedance (Ω) 10 25 1 5 100 250 MHz MHz MHz 27 70 90 MHz MHz MHz 138 230 240 0.60 19 49 62 95 160 185 6.00 0.52 18 45 58 88 140 167 12.00 0.52 34 88 115 175 295 267 8.30 0.43 17 44 58 88 140 160 17.70 0.43 35 91 119 181 300 280 10.30 0.36 16 40 53 75 130 150 20.50 0.36 30 79 103 156 260 268 23.10 0.32 27 69 89 138 225 265 13.30 0.29 14 35 44 69 115 140 26.60 0.29 27 69 89 138 225 235 55.00 0.22 31 79 103 156 260 280 68.00 0.21 32 82 106 163 270 300 25.00 0.17 10 24 31 49 88 130 116.00 0.17 37 98 120 205 340 315 278.00 0.11 40 103 140 215 365 290 118.00 0.09 12 28 40 63 119 215 420.00 0.05 14 31 45 76 175 500 + + Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 76 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] + Broadband Frequencies 25-300 MHz (43 material) A B C Wt. (g) H (Oe) MHz MHz MHz 2643480102 12.30 ±0.40 0.485 12.30 ±0.40 0.485 14.30 ±0.45 0.562 14.30 ±0.45 0.562 14.30 ±0.45 0.562 14.30 ±0.45 0.562 14.30 ±0.45 0.562 12.70 ±0.25 0.500 14.30 ±0.45 0.562 12.70 ±0.25 0.500 12.70 ±0.25 0.500 16.25 -0.75 0.625 16.25 -0.75 0.625 15.90 ±0.40 0.625 17.45 ±0.40 0.687 17.45 ±0.40 0.687 17.45 ±0.40 0.687 18.70 ±0.50 0.735 18.70 ±0.50 0.735 18.70 ±0.60 0.735 25.40 ±0.65 1.000 25.90 ±0.75 1.020 25.90 ±0.75 1.020 20.95 ±0.40 0.825 20.95 ±0.40 0.825 22.10 ±0.40 0.870 28.50 ±0.60 1.122 25.40 ±0.60 1.000 25.40 ±0.60 1.000 39.10 ±0.75 1.540 4.95 +0.25 0.200 4.95 +0.25 0.200 6.35 ±0.25 0.250 6.35 ±0.25 0.250 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.10 ±0.25 0.280 7.15 ±0.20 0.282 7.25 ±0.20 0.286 7.90 ±0.20 0.312 7.90 ±0.20 0.312 7.90 ±0.25 0.312 7.90 ±0.25 0.312 7.90 ±0.30 0.312 9.50 ±0.25 0.375 9.50 ±0.25 0.375 9.50 ±0.25 0.375 10.15 ±0.25 0.400 10.15 ±0.25 0.400 10.15 ±0.40 0.400 12.70 ±0.35 0.500 12.80 ±0.25 0.505 12.80 ±0.25 0.505 13.20 ±0.30 0.520 13.20 ±0.30 0.520 13.70 ±0.30 0.540 13.80 ±0.30 0.543 15.50 ±0.50 0.610 15.50 ±0.50 0.610 16.75 ±0.50 0.660 12.70 ±0.40 0.500 25.40 ±0.75 1.000 5.30 -0.45 0.200 10.15 ±0.40 0.400 13.80 -0.70 0.530 28.60 ±0.75 1.125 15.25 ±0.40 0.600 4.90 -0.25 0.188 28.60 ±0.75 1.125 6.35 ±0.20 0.250 12.70 ±0.40 0.500 14.30 ±0.35 0.562 28.60 ±0.75 1.125 50.80 ±1.00 2.000 6.35 ±0.25 0.250 12.70 ±0.50 0.500 28.60 ±0.75 1.125 14.65 -0.75 0.562 28.60 ±0.75 1.125 50.80 ±1.00 2.000 6.35 ±0.25 0.250 21.30 ±0.50 0.840 28.60 ±0.80 1.125 6.35 ±0.20 0.250 11.90 ±0.40 0.468 6.35 ±0.20 0.250 28.60 ±0.80 1.125 8.10 ±0.30 0.320 12.70 ±0.40 0.500 22.20 ±0.80 0.875 6.00 0.52 52 84 121 145 12.00 0.52 102 165 236 233 3.10 0.43 20 30 50 68 6.30 0.43 39 61 89 104 8.30 0.43 51 78 118 140 17.70 0.43 105 171 250 255 8.90 0.41 50 75 118 137 2.00 0.43 15 26 42 59 16.00 0.40 88 143 215 230 2.40 0.40 16 26 41 59 4.70 0.40 29 44 73 91 10.30 0.36 45 70 113 135 20.50 0.36 90 130 213 240 36.00 0.36 158 235 384 305 5.10 0.32 19 26 44 62 10.30 0.32 35 55 88 108 23.10 0.32 78 125 200 255 13.30 0.29 41 63 96 123 26.60 0.29 79 128 196 220 47.00 0.29 138 225 348 405 11.60 0.23 22 34 53 87 41.00 0.22 68 110 183 230 55.00 0.22 91 145 235 275 6.30 0.24 16 24 44 67 11.90 0.24 27 45 82 115 7.20 0.23 15 25 45 70 67.00 0.21 93 145 230 290 12.40 0.20 20 35 55 95 19.40 0.20 30 53 90 130 104.00 0.16 85 135 230 325 2643480002 2643540702 2643540102 2643540202 2643540002 2643540302 2643800302 2643540402 2643801102 2643801902 2643625002 2643625102 2643625202 2643665902 2643665802 2643665702 2643626302 2643626402 2643626502 2643801502 2643102402 2643102002 2643800602 2643800502 2643801802 2643101902 2643801402 2643806402 2643251002 10 Impedance (Ω) 25 100 Part Number MHz + + 250 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] 77 Broadband Frequencies 25-300 MHz (43 material) A B C Wt. (g) H (Oe) MHz MHz 2643801002 29.00 ±0.75 1.142 29.00 ±0.75 1.142 31.10 ±0.75 1.225 31.10 ±0.85 1.225 35.55 ±0.75 1.400 50.80 ±1.00 2.000 50.80 ±1.00 2.000 50.80 ±1.30 2.000 50.80 ±1.30 2.000 61.00 ±1.30 2.400 101.60 ±2.60 4.000 19.00 ±0.50 0.748 19.00 ±0.50 0.748 19.05 ±0.50 0.750 19.05 ±0.60 0.750 22.85 ±0.50 0.900 25.40 ±0.50 1.000 25.40 ±0.50 1.000 25.40 ±0.80 1.000 25.40 ±0.80 1.000 35.55 ±0.85 1.400 76.20 ±2.00 3.000 7.50 ±0.25 0.295 13.85 ±0.40 0.545 16.30 -0.75 0.627 50.80 ±1.00 2.000 12.70 ±0.50 0.500 25.40 ±0.75 1.000 28.70 ±0.75 1.130 38.10 ±0.75 1.500 50.80 ±1.00 2.000 12.70 ±0.50 0.500 25.40 ±0.70 1.000 13.60 0.17 17 28 47 80 25.10 0.17 28 51 92 142 36.00 0.17 37 60 100 153 116.00 0.17 105 195 330 310 36.00 0.14 28 48 80 135 190.00 0.11 80 128 224 310 215.00 0.11 90 145 254 373 285.00 0.11 118 193 336 280 380.00 0.11 157 240 360 257 118.00 0.09 33 58 108 218 420.00 0.05 46 75 169 400 2643801202 2643804502 2643103002 2643802702 2643626102 2643625902 2643626202 2643626002 2643803802 2643814002 10 Impedance (Ω) 25 100 Part Number MHz + + 250 MHz Broadband Frequencies 25-300 MHz (Economical 46 material) A B C Wt. (g) H (Oe) MHz MHz MHz MHz 2646480102 12.30 ±0.40 0.485 12.30 ±0.40 0.485 14.30 ±0.45 0.562 14.30 ±0.45 0.562 16.25 -0.75 0.625 16.25 -0.75 0.625 15.90 ±0.40 0.625 17.45 ±0.40 0.687 17.45 ±0.40 0.687 18.70 ±0.50 0.736 25.90 ±0.75 1.020 25.90 ±0.75 1.020 28.50 ±0.60 1.122 31.10 ±0.75 1.225 4.95 +0.25 0.200 4.95 +0.25 0.200 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.90 ±0.25 0.312 7.90 ±0.25 0.312 7.90 ±0.30 0.312 9.50 ±0.25 0.375 9.50 ±0.25 0.375 10.15 ±0.25 0.400 12.80 ±0.25 0.505 12.80 ±0.25 0.505 13.80 ±0.30 0.543 19.05 ±0.50 0.750 12.70 ±0.40 0.500 25.40 ±0.75 1.000 13.80 -0.70 0.530 28.60 ±0.75 1.125 14.30 ±0.35 0.562 28.60 ±0.75 1.125 50.80 ±1.00 2.000 12.70 ±0.50 0.500 28.60 ±0.75 1.125 28.60 ±0.75 1.125 21.30 ±0.50 0.840 28.60 ±0.80 1.125 28.60 ±0.80 1.125 16.30 -0.75 0.627 6.00 0.52 42 62 110 145 12.00 0.52 83 125 212 233 8.30 0.43 45 66 106 127 17.70 0.43 89 134 225 253 10.30 0.36 44 63 102 135 20.50 0.36 78 115 192 235 36.00 0.36 138 204 345 270 10.30 0.32 32 49 79 110 23.10 0.32 72 106 180 225 26.60 0.29 70 110 170 210 41.00 0.22 67 100 165 218 55.00 0.22 74 118 212 268 67.00 0.21 80 121 207 285 36.00 0.17 33 49 90 150 2646480002 2646540202 2646540002 2646625002 2646625102 2646625202 2646665802 2646665702 2646626402 2646102402 2646102002 2646101902 2646804502 10 Impedance (Ω) 25 100 Part Number Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 78 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] + 250 Broadband Frequencies 25-300 MHz (Economical 46 material) A B C Wt. (g) H (Oe) MHz MHz MHz MHz 2646626202 50.80 ±1.30 2.000 61.00 ±1.30 2.400 25.40 ±0.80 1.000 35.55 ±0.85 1.400 38.10 ±0.75 1.500 12.70 ±0.50 0.500 285.00 0.11 102 165 302 280 118.00 0.09 30 44 100 200 2646803802 10 Impedance (Ω) 25 100 Part Number + 250 Higher Frequencies 200-1000 MHz (61 material) Impedance (Ω) 250 500 1000 MHz MHz MHz MHz 210 325 395 415 0.43 100 145 185 260 17.70 0.43 205 295 370 350 4.70 0.40 45 70 105 175 23.10 0.32 190 280 360 450 26.60 0.29 185 250 370 460 41.00 0.22 125 200 310 550 55.00 0.22 190 300 380 400 Part Number A B C Wt. (g) H (Oe) 2661480002 12.30 ±0.40 0.485 14.30 ±0.45 0.562 14.30 ±0.45 0.562 12.70 ±0.25 0.500 17.45 ±0.40 0.687 19.00 -0.65 0.735 25.90 ±0.75 1.020 25.90 ±0.75 1.020 4.95 ±0.20 0.200 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.90 ±0.25 0.312 9.50 ±0.25 0.375 10.15 ±0.25 0.400 12.80 ±0.25 0.505 12.80 ±0.25 0.505 25.40 ±0.75 1.000 13.80 -0.70 0.530 28.60 ±0.75 1.125 12.70 ±0.40 0.500 28.60 ±0.75 1.125 28.60 ±0.75 1.125 21.30 ±0.50 0.840 28.60 ±0.80 1.125 12.00 0.52 8.30 2661540202 2661540002 2661801902 2661665702 2661626402 2661102402 2661102002 100 + + Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] 79 Round cable snap-its can easily accommodate round cables or bundled wires with diameters from 2.5 mm (0.100”) to 25.4 mm (1.000”). These assemblies are available in four ferrite material classes to suppress differential or common-mode conducted EMI from 1 MHz into the GHz region. The polypropylene cases are meeting the RoHS restrictions of hazardous substances and have a flammability rating of UL 94 V-0. • Round cable snap-it assemblies are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. • Single turn impedance tests for the 31, 43/44 and 46 material parts are performed on the 4193A Vector Impedance Analyzer. The 61 material parts are tested on the 4291A RF Impedance Analyzer and 75 material parts are tested on the 4285A LCR Meter.. Cores are tested with the shortest practical wire length. • Performance curves for these suppression components are our web site. • Many of the snap-it parts have round core equivalents. See “Round Cable EMI Suppression Cores”. • The “B” dimension is the core inside diameter. • Round Cable Snap-It Kits are available for each of the four suppression materials. 31 Snap-It Kit (0199000030), 43 Snap-It Kit (0199000031), 46 Core and Snap-It Kit (0199000032) and 61 Snap-It Kit (0199000033). • Explanation of Part Numbers: Digits 1&2 = product class and 3&4 = material grade. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 80 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) Test frequency + Low Frequency 200 kHz - 30 MHz (75 material) Part Number Fig. Max. Cable Diameter 0475181651 2 0475164281 1 0475178281 1 0475167281 1 0475164181 1 0475176451 1 4.09 0.193 6.30 0.248 8.70 0.343 9.85 0.388 12.7 0.500 18.00 0.709 Impedance (Ω) 200 500 1 2 A B C D Wt. (g) 5 13.00 0.512 20.00 0.787 21.00 0.827 23.00 0.906 30.00 1.181 38.50 1.516 5.10 0.201 6.60 0.260 9.00 0.354 10.15 0.400 13.05 0.514 18.70 0.736 23.00 0.906 39.50 1.555 39.40 1.551 39.50 1.555 39.50 1.555 47.50 1.870 6.05 0.238 10.00 0.394 10.50 0.413 11.70 0.461 15.50 0.610 19.15 0.754 6.50 14 35 66 108 110 2675023002 26.00 19 49 102 172 110 2675540002 23.00 18 46 87 115 74 2675665702 33.00 17 47 92 110 67 2675626402 61.00 20 58 102 70 50 2675102002 161.00 30 92 130 81 66 - kHz kHz MHz MHz MHz Solid Equivalent Lower & Broadband Frequencies 1-300 MHz (31 material) Part Number Fig. Max. Cable Diameter 0431178181 1 0431173951 1 0431164951 1 0431164281 1 0431178281 1 0431167281 1 0431164181 1 0431176451 1 0431173551 2 0431177081 1 2631181381 4 4.10 0.161 4.90 0.193 4.90 0.193 6.30 0.250 8.70 0.343 9.85 0.388 12.70 0.500 18.00 0.709 18.50 0.728 25.15 0.990 35.4 1.394 A B C D 11.80 4.30 23.20 5.60 0.465 0.169 0.913 0.221 12.80 5.10 25.00 5.60 0.504 0.201 0.984 0.220 17.30 5.10 36.20 8.40 0.680 0.201 1.420 0.331 20.00 6.60 39.40 9.80 0.788 0.260 1.550 0.385 21.50 9.00 39.40 10.55 0.846 0.354 1.550 0.415 23.70 10.15 39.40 11.70 0.933 0.400 1.550 0.461 31.00 13.05 39.40 15.25 1.220 0.514 1.550 0.600 38.60 18.35 47.50 19.15 1.520 0.722 1.870 0.755 29.20 18.80 42.00 14.70 1.150 0.740 1.650 0.579 56.40 25.65 42.95 27.45 2.220 1.010 1.690 1.080 62.10 ±1.00 37.20 ±0.64 63.50 ±1.50 30.20 ±0.31 2.445 1.465 2.500 1.190 Wt. (g) 1 5 Impedance (Ω) 10 25 100 + + + 250 MHz MHz MHz MHz MHz MHz Solid Equivalent 4.20 12 43 60 90 160 183 _ 6.50 14 44 60 100 180 208 2631023002 17.00 25 75 100 169 280 247 2631480002 26.00 28 83 105 180 310 240 2631540002 23.00 18 63 85 130 250 275 2631665702 33.00 18 56 81 144 240 270 2631626402 61.00 25 71 100 156 260 260 2631102002 161.00 47 95 130 225 380 370 2631103002 78.00 16 48 69 125 220 310 _ 308.00 45 90 125 218 375 340 2631626202 289.00 60 150 190 290 490 530 _ Broadband Frequencies 25-300 MHz (43 & 44 materials) Part Number Fig. Max. Cable Diameter 0443178181 1 0444173951 1 4.10 0.161 4.90 0.193 10 Impedance (Ω) 25 100 250 A B C D E Wt. (g) 11.80 0.465 12.80 0.504 4.30 0.169 5.10 0.201 23.20 0.913 25.00 0.984 5.60 0.221 5.60 0.220 _ 4.20 40 70 125 152 _ _ 6.50 54 94 150 187 2643023002 + + MHz MHz MHz MHz Solid Equivalent Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] 81 Broadband Frequencies 25-300 MHz (43 & 44 materials) Part Number Fig. Max. Cable Diameter 0444164951 1 0443164251 2 0444164281 1 0443625006 3 0443178281 1 0443665806 3 0443167251 2 0444167281 1 0443164151 2 0444164181 1 0443800506 3 0443806406 3 0444176451 1 0444173551 2 0444177081 1 2644181281 4 4.90 0.193 6.30 0.250 6.30 0.250 7.60 0.299 8.70 0.343 9.20 0.362 9.85 0.388 9.85 0.388 12.70 0.500 12.70 0.500 12.80 0.504 15.00 0.591 18.00 0.709 18.50 0.728 25.15 0.990 33.0 1.300 A B C D 17.30 5.10 36.20 8.40 0.680 0.201 1.420 0.331 17.90 6.60 32.20 9.20 0.705 0.260 1.270 0.362 20.00 6.60 39.40 9.80 0.788 0.260 1.550 0.385 24.70 7.90 22.80 10.20 0.972 0.311 0.898 0.402 21.50 9.00 39.40 10.55 0.846 0.354 1.550 0.415 26.30 9.50 21.40 11.00 1.035 0.374 0.843 0.433 22.10 10.15 32.30 11.00 0.870 0.400 1.272 0.433 23.70 10.15 39.40 11.70 0.933 0.400 1.550 0.460 29.00 13.05 32.50 14.80 1.142 0.514 1.280 0.583 31.00 13.05 39.40 15.25 1.220 0.514 1.550 0.600 29.70 13.20 20.60 12.70 1.169 0.520 0.811 0.500 34.30 15.50 21.20 15.00 1.360 0.610 0.835 0.591 38.60 18.35 47.50 19.15 1.520 0.722 1.870 0.755 29.20 18.80 42.00 14.70 1.150 0.740 1.650 0.579 56.40 25.65 42.95 27.45 2.220 1.010 1.690 1.080 61.00 ±1.30 37.20 ±.90 12.70 ±.65 29.60 ±.35 2.402 1.465 0.500 1.165 Wt. (g) _ 17.00 90 144 245 257 2643480002 _ 31.00 100 163 275 275 2643540002 _ 26.00 95 156 260 270 2643540002 17.80 0.701 _ 13.00 27 50 113 188 2643625002 24.00 65 120 230 265 2643665702 16.40 0.646 _ 13.00 23 41 88 122 2643665802 42.00 79 138 225 285 2643626402 _ 33.00 77 125 210 260 2643626402 _ 84.00 90 156 250 305 2643102002 _ 61.00 76 138 230 280 2643102002 15.60 0.614 16.20 0.638 _ 16.00 18 35 75 120 2643800502 23.00 24 43 90 147 2643806402 161.00 100 175 365 365 2643103002 _ 78.00 50 95 195 322 2643103102 _ 308.00 115 194 335 330 2643626202 63.00 56 104 170 2643803802 16.50 MIN 0.650 MIN 10 Impedance (Ω) 25 100 250 E + + MHz MHz MHz 35 MHz Solid Equivalent Broadband Frequencies 25-300 MHz (Economical 46 material) Part Number Fig. Max. Cable Diameter 0446173951 1 0446164951 1 0446164281 1 0446164251 2 0446167281 1 0446167251 2 0446164181 1 0446164151 2 0446176451 1 4.90 0.193 4.90 0.193 6.30 0.250 6.30 0.250 9.85 0.388 9.85 0.388 12.70 0.500 12.70 0.500 18.00 0.709 10 Impedance (Ω) 25 100 250 A B C D Wt. (g) 12.80 0.504 17.30 0.680 20.00 0.788 17.90 0.705 23.70 0.933 22.10 0.870 31.00 1.220 29.00 1.142 38.60 1.520 5.10 0.201 5.10 0.201 6.60 0.260 6.60 0.260 10.15 0.400 10.15 0.400 13.05 0.514 13.05 0.514 18.35 0.722 25.00 0.984 38.20 1.420 39.40 1.550 32.20 1.270 39.40 1.550 32.30 1.272 39.40 1.550 32.50 1.280 47.50 1.870 5.60 0.220 8.40 0.331 9.80 0.385 9.20 0.362 11.70 0.460 11.00 0.433 15.25 0.600 14.80 0.583 19.15 0.755 6.50 46 82 135 185 _ 17.00 72 120 220 250 2646480002 26.00 81 131 235 265 2646540002 31.00 81 134 245 273 2646540002 33.00 66 105 190 275 2646626402 42.00 72 116 202 247 2646626402 61.00 73 115 205 275 2646102002 84.00 84 127 225 270 2646102002 161.00 85 137 330 360 _ + MHz MHz MHz MHz Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 82 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] Solid Equivalent Broadband Frequencies 25-300 MHz (Economical 46 material) Part Number 0446173551 Fig. Max. Cable Diameter 2 18.50 0.728 A B C D Wt. (g) 29.20 1.150 18.80 0.740 42.00 1.650 14.70 0.579 78.00 10 Impedance (Ω) 25 100 250 + MHz MHz MHz 48 85 MHz 176 300 Solid Equivalent _ Higher Frequencies 200-1000 MHz (61 material) Part Number Fig. Max. Cable Diameter 0461178181 1 0461164951 1 0461164281 1 0461178281 1 0461167281 1 0461164181 1 0461176451 1 4.10 0.161 4.90 0.193 6.30 0.250 8.70 0.343 9.85 0.388 12.70 0.500 18.00 0.709 100 Impedance (Ω) 250 500 1000 A B C D Wt. (g) 11.80 0.465 17.30 0.680 20.00 0.788 21.50 0.846 23.70 0.933 31.00 1.220 38.60 1.520 4.30 0.169 5.10 0.201 6.60 0.260 9.00 0.354 10.15 0.400 13.05 0.514 18.35 0.722 23.20 0.913 38.20 1.420 39.40 1.550 39.40 1.550 39.40 1.550 39.40 1.550 47.50 1.870 5.60 0.221 8.40 0.331 9.80 0.385 10.55 0.415 11.70 0.460 15.25 0.600 19.15 0.755 4.20 115 165 215 300 _ 17.00 215 325 385 332 2661480002 26.00 230 355 425 420 2661540002 24.00 180 285 380 430 2661665702 33.00 175 275 375 400 2661626402 61.00 205 320 435 257 2661102002 161.00 360 480 350 110 _ + + MHz MHz MHz MHz Solid Equivalent Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] 83 Flat cable suppression core can accommodate multi-conductors flat cables, in widths from 12.7 mm (0.500”) up to 77 mm (3.0”). These flat cable cores are available in two ferrite material grades to reduce conducted EMI from 1 MHz to hundreds of MHz. • Flat cable suppression cores, split or single cores, are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. • Centered, single turn impedance tests for the 31 and 43 material parts are performed on the 4193A Vector Impedance Analyzer. All tests are made with the shortest practical wire length. • Performance curves for these suppression components are on our web site. • Assembly clips are available for most of the split flat cable cores. See section “Flat Cable Cores Assembly clips”. • Our “ Expanded Cable & Suppressor Kit” (part number 0199000005) contains a selection of these flat cable cores and clips. • Flat Cable Cores are available in selected sizes in the “Flex Circuit & Ribbon Cable Core Kit” (part number 0199000038). • Explanation of Part Numbers: Digits 1&2 = product class and 3&4 = material grade. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 84 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Lower & Broadband Frequencies 1-300 MHz (31 material) Part Number Fig. Max. Cable Dimensions 2631163851 3 2631164051 1 A B C D E Wt. (g) 25.90 x 1.50 38.10 ±1.00 26.65 ±0.75 25.40 ±0.75 12.05 ±0.40 1.90 ±0.40 1.020 x 0.060 1.500 1.050 1.000 0.475 0.075 64.00 x 1.30 76.20 ±1.50 65.30 ±1.30 28.60 ±0.80 6.35 ±0.25 0.85 ±0.20 2.520 x 0.050 3.000 2.570 1.125 0.250 0.033 Impedance (Ω) 10 25 100 250 MHz MHz MHz MHz MHz MHz 1 5 + + + 51.00 20 52 68 112 240 440 60.00 11 34 52 105 310 440 Broadband Frequencies 25-300 MHz (43 material) Part Number Fig. 2643180251 3 2643180851 1 2643173851 1 2643170251 2 2643178351 4 2643169552 3 2643168751 3 2643173351 4 2643180351 3 2643178651 4 2643178551 4 2643169351 3 2643168651 2 2643164551 3 2643171051 1 2643166851 1 2643163851 3 2643178751 4 2643180451 4 2643172551 4 Max. Cable Dimensions A 8.90 x 0.60 0.350 x 0.024 9.50 x 0.80 0.375 x 0.031 12.30 x 1.00 0.484 x 0.039 12.20 x 2.30 0.480 x 0.091 13.10 x 1.35 0.516 x 0.053 13.95 x 0.75 0.549 x 0.030 17.30 x 2.30 0.681 x 0.091 19.60 x 0.50 0.772 x 0.020 20.30 x 0.70 0.799 x 0.027 21.10 x 1.35 0.831 x 0.053 21.10 x 1.35 0.831 x 0.053 27.00 x 1.10 1.063 x 0.043 25.40 x 12.20 1.000 x 0.480 25.90 x 1.50 1.020 x 0.059 25.90 x 1.30 1.020 x 0.051 25.90 x 1.30 1.020 x 0.051 25.90 x 1.50 1.020 x 0.059 26.10 x 1.35 1.028 x 0.053 26.30 x 0.70 1.035 x 0.027 26.50 x 1.25 1.043 x 0.049 13.70 ±0.40 0.539 12.80 ±0.40 0.504 16.50 ±0.25 0.650 22.75 ±0.65 0.895 18.50 ±0.40 0.728 19.95 ±0.40 0.785 25.40 ±0.75 1.000 24.50 ±0.40 0.965 25.00 ±0.80 0.984 26.50 ±0.40 1.043 26.50 ±0.40 1.043 33.65 ±0.75 1.325 38.85 ±0.75 1.530 38.10 ±1.00 1.500 38.10 ±1.00 1.500 38.10 ±1.00 1.500 38.10 ±1.00 1.500 31.50 ±0.40 1.240 31.00 ±1.00 1.220 33.50 ±0.65 1.319 B 9.20 ±0.30 0.362 9.80 ±0.25 0.386 12.50 ±0.20 0.492 12.70 ±0.50 0.500 13.50 ±0.40 0.531 14.20 ±0.25 0.560 17.80 ±0.50 0.700 20.00 ±0.40 0.787 21.00 ±0.70 0.827 21.50 ±0.40 0.846 21.50 ±0.40 0.846 27.50 ±0.50 1.083 26.15 ±0.75 1.030 26.65 ±0.75 1.050 26.65 ±0.75 1.050 26.65 ±0.75 1.050 26.65 ±0.75 1.050 26.50 ±0.40 1.043 27.00 ±0.70 1.063 27.00 ±0.50 1.063 C 18.00 ±0.40 0.709 12.00 ±0.40 0.472 10.25 ±0.25 0.404 12.70 ±0.50 0.500 12.00 ±0.30 0.472 10.15 ±0.50 0.400 12.70 ±0.40 0.500 12.00 ±0.30 0.472 12.00 ±0.30 0.472 6.00 ±0.30 0.236 12.00 ±0.30 0.472 13.20 ±0.50 0.520 28.60 ±0.70 1.125 12.30 ±0.40 0.485 12.70 ±0.40 0.500 25.40 ±0.75 1.000 25.40 ±0.75 1.000 12.00 ±0.30 0.472 6.00 ±0.30 0.236 8.00 ±0.40 0.315 D 5.30 ±0.30 0.209 2.10 ±0.20 0.083 2.00 ±0.15 0.079 3.30 -0.25 0.125 6.60 ±0.25 0.260 6.35 ±0.25 0.250 10.15 ±0.25 0.400 5.00 ±0.25 0.197 5.00 ±0.30 0.197 6.60 ±0.25 0.260 6.60 ±0.25 0.260 6.70 ±0.40 0.264 13.00 ±0.30 0.512 12.05 ±0.40 0.475 6.35 ±0.25 0.250 6.35 ±0.25 0.250 12.05 ±0.40 0.475 6.60 ±0.25 0.260 5.00 ±0.30 0.197 6.50 ±0.25 0.256 E 0.80 ±0.20 0.031 0.50 ±0.1 0.020 0.63 +0.13 0.025 1.15 +0.25 0.050 1.60 ±0.25 0.063 0.90 ±0.15 0.035 2.55 ±0.25 0.100 0.75 ±0.25 0.030 0.80 ±0.10 0.031 1.60 ±0.25 0.063 1.60 ±0.25 0.063 1.35 ±0.25 0.053 6.35 +0.25 0.255 1.90 ±0.40 0.075 0.85 ±0.20 0.033 0.85 ±0.20 0.033 1.90 ±0.40 0.075 1.60 ±0.25 0.063 0.80 ±0.10 0.031 1.25 +0.70 0.063 Wt. (g) 10 Impedance (Ω) 25 100 250 + MHz MHz + MHz MHz 5.60 55 80 130 225 1.30 22 40 70 100 1.20 15 28 58 93 3.50 20 35 70 135 5.90 31 48 82 140 5.70 25 40 90 160 13.00 31 50 95 200 6.60 23 39 88 157 6.20 21 36 80 125 4.10 13 22 50 95 8.20 24 38 82 155 12.00 22 37 89 170 45.00 57 100 188 295 25.00 33 53 105 215 14.00 32 53 112 235 27.00 66 115 235 410 51.00 64 105 220 385 9.70 22 37 85 157 3.90 10.5 20 45 70 6.80 12 22 58 106 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 85 Broadband Frequencies 25-300 MHz (43 material) Part Number Fig. 2643166451 1 2643168051 1 2643167551 1 2643170951 1 2643166551 3 2643166651 1 2643180551 4 2643180651 4 2643180751 4 2643168251 1 2643163951 1 2643167751 1 2643164051 1 2643168351 1 Max. Cable Dimensions A 26.95 x 6.10 1.061 x 0.240 32.30 x 6.20 1.272 x 0.244 32.30 x 6.20 1.272 x 0.244 33.70 x 1.30 1.327 x 0.051 33.70 x 1.20 1.327 x 0.047 33.70 x 1.30 1.327 x 0.051 34.10 x 1.05 1.342 x 0.041 39.00 x 1.20 1.535 x 0.047 51.00 x 1.10 2.008 x 0.043 51.00 x 1.30 2.008 x 0.051 51.00 x 1.30 2.008 x 0.051 64.00 x 1.30 2.520 x 0.051 64.00 x 1.30 2.520 x 0.051 76.70 x 1.30 3.020 x 0.051 38.35 ±1.00 1.510 52.90 ±1.00 2.083 52.90 ±1.00 2.083 45.10 ±0.75 1.775 45.10 ±0.75 1.775 45.10 ±0.75 1.775 40.00 ±1.00 1.575 45.20 ±1.00 1.780 57.60 ±1.00 2.268 63.50 ±1.30 2.500 63.50 ±1.30 2.500 76.20 ±1.50 3.000 76.20 ±1.50 3.000 88.90 ±1.80 3.500 B 27.95 ±1.00 1.100 33.00 ±0.70 1.299 33.00 ±0.70 1.299 34.40 ±0.70 1.355 34.40 ±0.70 1.355 34.40 ±0.70 1.355 34.80 ±0.70 1.370 40.00 ±1.00 1.575 52.00 ±1.00 2.047 52.10 ±1.10 2.050 52.10 ±1.10 2.050 65.30 ±1.30 2.570 65.30 ±1.30 2.570 78.20 ±1.50 3.080 C D 28.60 ±0.70 9.00 ±0.30 1.125 0.355 31.25 ±1.00 12.50 ±0.40 1.230 0.492 63.50 ±1.80 12.50 ±0.40 2.500 0.492 12.70 ±0.40 6.35 ±0.25 0.500 0.250 28.60 ±0.70 12.45 ±0.40 1.125 0.490 28.60 ±0.70 6.35 ±0.25 1.125 0.250 18.00 ±0.40 6.50 ±0.30 0.709 0.256 12.00 ±0.40 6.50 ±0.30 0.472 0.256 12.00 ±0.40 6.50 ±0.30 0.472 0.256 12.70 ±0.40 6.35 ±0.25 0.500 0.250 28.60 ±0.80 6.35 ±0.25 1.125 0.250 12.70 ±0.40 6.35 ±0.25 0.500 0.250 28.60 ±0.80 6.35 ±0.25 1.125 0.250 28.60 ±0.80 6.50 ±0.35 1.125 0.256 E 3.30 ±0.25 0.130 3.50 ±0.40 0.138 3.50 ±0.40 0.138 0.85 ±0.20 0.033 1.50 ±0.30 0.060 0.85 ±0.20 0.033 1.30 ±0.25 0.051 1.50 ±0.30 0.059 1.40 ±0.30 0.055 0.85 ±0.20 0.033 0.85 ±0.20 0.033 0.85 ±0.20 0.033 0.85 ±0.20 0.033 0.95 ±0.30 0.037 Wt. (g) 10 Impedance (Ω) 25 100 250 + MHz MHz Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E MHz 35.00 61 96 185 335 84.00 81 140 265 400 170.00 150 270 480 370 16.00 25 50 115 240 71.00 67 115 300 415 36.00 60 110 290 435 18.00 25 44 110 170 13.00 17 23 33 160 17.00 20 33 76 165 22.00 22 50 125 255 50.00 56 100 290 400 27.00 22 45 115 240 60.00 48 100 290 420 70.00 45 100 280 440 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 86 + MHz Web: www.fair-rite.com -mail: [email protected] Fair-Rite offers several clips to accommodate the assembly of the split flat cable suppression cores. • Figures 1 and 2 are metal clips, made from 0.5 mm (0.020") high carbon steel with a zinc electroplate finish. • Figure 3 clips are a polypropylene material RoHS compliant, with a flammability rating of UL 94 V-0. Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) Clips Part Number Fig. A B C D E F G H J Flat Cable Cores 2631164051 2643163951 2643164051 2643166651 2643166851 2643167751 2643168251 2643168351 2643170951 2643171051 2643166451 0199001401 1 16.10 0.635 11.00 0.433 12.70 0.500 11.40 0.450 8.00 0.315 _ _ _ _ 0199010301 2 0199016051 3 21.20 0.835 16.70 0.657 11.00 0.433 15.90 0.626 12.70 0.500 15.90 0.626 16.50 0.650 24.60 0.969 8.00 0.315 4.40 0.171 7.50 0.295 3.20 0.126 4.00 0.157 6.40 0.252 6.00 0.236 13.10 0.516 3.00 0.118 _ 0199016551 3 16.70 0.657 32.20 1.270 15.90 0.626 40.50 1.590 4.40 0.171 3.20 0.126 6.40 0.252 29.50 1.161 _ 2643167751 2643168251 2643170951 2643171051 2631164051 2643163951 2643164051 2643166651 2643168351 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 87 Flat cable snap-its for use on multi-conductor flat cables to suppress common-mode conducted EMI from 1MHz to hundreds of MHz. These flat cable snap-its are available in two ferrite materials, 31 and 43. The polypropylene cases are meeting the RoHS restrictions of hazardous substances and have a flammability rating of UL 94 V-0. • Flat cable snap-it assemblies are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. • Centered, single turn impedance tests on the 31 and 43 material parts are performed on the 4193A Vector Impedance Analyzer. Cores are tested with the shortest practical wire length. • Performance curves for these suppression components are on our web site. • The “Expanded Cable and Suppressor Kit” (Part number 0199000005) contains several flat cable snap-it assemblies. • Explanation of Part Numbers: Digits 1&2 = product class and 3&4 = material grade. Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Lower & Broadband Frequencies 1-300 MHz (31 material) Part Number 0431163951 0431164051 Max. Cable Dimensions A B 51.00 x 1.30 2.000 x 0.050 64.00 x 1.30 2.520 x 0.050 67.80 2.670 80.80 3.180 C 52.10 2.050 65.30 2.570 D 32.30 1.272 32.30 1.272 8.10 0.320 8.10 0.320 Wt. (g) 1 5 MHz Impedance (Ω) 10 25 100 + MHz MHz + + 250 MHz MHz MHz 110.00 13 35 54 105 300 425 130.00 11 34 52 105 310 440 Broadband Frequencies 25-300 MHz (43 material) Part Number 0443166651 0443163951 0443164051 Max. Cable Dimensions A 33.70 x 1.30 1.325 x 0.050 51.00 x 1.30 2.000 x 0.050 64.00 x 1.30 2.520 x 0.050 49.50 1.950 67.80 2.670 80.80 3.180 B 34.40 1.350 52.10 2.050 65.30 2.570 C 32.30 1.272 32.30 1.272 32.30 1.272 D Wt. (g) 8.10 0.320 8.10 0.320 8.10 0.320 10 MHz Impedance (Ω) 25 100 250 + MHz MHz 80.00 60 110 290 435 110.00 56 100 290 400 130.00 48 100 290 420 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 88 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E + MHz Web: www.fair-rite.com -mail: [email protected] To provide suppression of conducted EMI at critical interfaces Fair-Rite has available a line of suppression plates that can be used with many types of connectors. All connector plates are supplied in the NiZn 44 grade ideally suited for this application because of its high impedance along with a high resistivity. • Connector plates are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed typical impedance less 20%. Single turn impedance tests are performed on the 4193A Vector Impedance Analyzer, using the shortest practical wire length. • Performance curves for these suppression components are on our web site. • The “C” dimension can be modified to suit specific applications. • For any connector EMI suppression plate requirement not listed here, feel free to contact our customer service group for availability and pricing. • Explanation of Part Numbers: Digit 1&2 = product class and 3&4 = the 44 material grade. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 89 Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) Test frequency + Connector Plates Part Number Fig. Holes Rows 2644246701 1 5 1 2644246201 2 6 2 2644245701 2 6 2 2644236101 3 9 2 2644236401 3 9 2 2644247001 4 10 2 2644247101 4 10 2 2644236301 3 15 2 2644236501 3 15 2 2644373941 5 16 2 2644373841 5 16 2 2644236001 3 25 2 2644236601 3 25 2 A 12.52 ±0.13 0.493 5.86 ±0.10 0.231 7.44 ±0.10 0.293 14.40 ±0.15 0.567 14.40 ±0.15 0.567 12.52 ±0.13 0.493 12.52 ±0.13 0.493 22.55 ±0.25 0.888 22.55 ±0.25 0.888 21.60 ±0.25 0.850 20.30 ±0.25 0.800 36.30 ±0.40 1.430 36.30 ±0.40 1.430 B 2.54 Max 0.100 Max 3.86 ±0.10 0.152 4.90 ±0.10 0.193 7.75 -0.25 0.300 7.75 -0.25 0.300 4.94 ±0.14 0.194 4.94 ±0.14 0.194 7.75 -0.25 0.300 7.75 -0.25 0.300 11.65 -0.40 0.451 10.15 -0.40 0.392 7.75 -0.25 0.300 7.75 -0.25 0.300 C 1.52 ±0.13 0.060 1.52 ±0.13 0.060 1.52 ±0.13 0.060 3.43 ±0.13 0.135 6.86 ±0.13 0.270 1.52 ±0.13 0.060 3.05 ±0.13 0.120 3.43 ±0.13 0.135 6.86 ±0.13 0.270 1.52 ±0.13 0.060 3.18 ±0.13 0.125 3.43 ±0.13 0.135 6.86 ±0.13 0.270 D 2.54 ±0.13 0.100 2.00 ±0.08 0.079 2.54 ±0.13 0.100 2.75 ±0.13 0.108 2.75 ±0.13 0.108 2.54 ±0.13 0.100 2.54 ±0.13 0.100 2.75 ±0.13 0.108 2.75 ±0.13 0.108 2.54 ±0.13 0.100 2.54 ±0.13 0.100 2.75 ±0.13 0.108 2.75 ±0.13 0.108 E _ 2.00 ±0.08 0.079 2.54 ±0.10 0.100 2.85 ±0.13 0.112 2.85 ±0.13 0.112 2.54 ±0.10 0.100 2.54 ±0.10 0.100 2.85 ±0.13 0.112 2.85 ±0.13 0.112 7.62 ±0.15 0.300 2.54 ±0.10 0.100 2.85 ±0.13 0.112 2.85 ±0.13 0.112 F 1.22 ±0.07 0.048 0.82 +0.10 0.034 1.22 ±0.07 0.048 1.60 ±0.08 0.062 1.60 ±0.08 0.062 1.22 ±0.07 0.048 1.22 ±0.07 0.048 1.60 ±0.08 0.062 1.60 ±0.08 0.062 1.00 +0.15 0.042 1.22 ±0.07 0.048 1.60 ±0.08 0.062 1.60 ±0.08 0.062 Wt. (g) Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E + + MHz MHz 0.18 13 28 0.14 14 28 0.22 13 28 1.60 30 51 3.20 56 91 0.37 13 28 0.74 23 40 2.40 30 51 4.90 56 91 2.90 19 36 2.80 30 51 3.60 30 51 7.20 56 91 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 90 Impedance (Ω) 25 100 Web: www.fair-rite.com -mail: [email protected] Fair-Rite has tooled several special core geometries in the 43 & 77 material for suppression of conducted EMI. • These suppression cores are controlled for impedance only. The minimum impedance is typically the listed impedance less 20%. Single turns tests are performed on the 4193A Vector Impedance Analyzer with the shortest practical wire length. • Performance curves for these suppression components are on our web site. • For any non-catalog suppression core design feel free to contact our customer service or application group for feasibility and availability. • The “C” dimension, the core length, can be modified to suit specific applications. • Explanation of Part Numbers: Digits 1&2 = product class and 3&4 = the material grade. Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) + Test frequency Parts for Fig’s 3 & 4 tested in pairs Broadband Frequencies 25-300 MHz (43 material) Part Number Fig. 2643167851 1 2643165151 3 2643175451 4 A B 38.85 ±0.75 1.530 82.60 ±1.60 3.250 17.80 ±0.40 0.700 26.15 ±0.75 1.030 13.10 ±0.30 0.516 12.70 ±0.50 0.500 C D 28.60 ±0.70 1.125 28.00 ±0.70 1.100 20.32 ±0.50 0.800 E 26.00 ±0.60 1.025 12.95 ±0.25 0.510 6.60 ±0.25 0.260 12.95 ±0.25 0.510 19.05 ±0.40 0.750 5.08 ±0.25 0.200 Wt. (g) 10 MHz Impedance (Ω) 25 100 250 + + MHz MHz MHz 85.00 60 94 169 250 109.00 100 163 280 340 19.00 75 119 180 270 Lower Frequencies < 50 MHz (77 material) Part Number Fig. 2677006302 2 2677102402 2 A 9.50 ±0.25 0.375 25.90 ±0.75 1.020 B 4.75 +0.30 0.193 12.80 ±0.25 0.505 C 10.40 ±0.25 0.410 21.30 ±0.50 0.840 Wt. (g) 1 Impedance (Ω) 10 25 MHz + + MHz MHz 2.20 25 40 33 41.00 52 25 23 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 91 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 92 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Pressed Fair-Rite rods are used extensively in high-energy storage designs. These rods can also be used for inductive components that require temperature stability or have to accommodate large dc bias requirements. • The “A” dimension can be centerless ground to tighter tolerances. • Figure 2 rods have a 0.6 mm (0.024”) maximum chamfer on the end faces. • For frequency tuned rod designs see section “Antenna/RFID Rods”. • For any rod requirement not listed here, feel free to contact our customer service group for availability and pricing. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade. Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) Low Permeability, 61(µi=125) material Part Number Fig. A C Wt. (g) 4061272011 1 1 4061276011 1 4061266011 1 4061378111 1 4061375411 1 19.05 ±0.75 0.750 22.10 ±0.70 0.870 25.40 ±0.70 1.000 38.10 ±0.75 1.500 25.40 ±0.80 1.000 41.30 ±0.80 1.626 2.90 4061287011 6.35 ±0.25 0.250 6.35 ±0.25 0.250 6.35 ±0.25 0.250 6.35 ±0.25 0.250 9.50 ±0.30 0.374 9.50 ±0.30 0.374 3.40 3.90 5.80 8.60 14.00 Low Permeability, High Saturation 52 (µi=250) material Part Number Fig. A C Wt. (g) 4052077111 1 1 4052111011 1 4052155611 1 4052195211 1 4052235211 1 4052251111 1 15.00 ±0.45 0.591 15.00 ±0.45 0.591 20.00 ±0.60 0.787 25.00 ±0.70 0.984 25.00 ±0.70 0.984 30.00 ±0.75 1.181 30.00 ±0.75 1.181 0.23 4052098411 2.00 ±0.13 0.079 2.50 ±0.13 0.098 3.00 ±0.13 0.118 4.00 ±0.15 0.157 5.00 ±0.20 0.197 6.00 ±0.25 0.236 6.50 ±0.25 0.256 0.36 0.69 1.54 2.40 4.10 4.80 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 93 Temperature Stable, 33 (µi=600) material Part Number Fig. A C Wt. (g) 4033129021 1 1 4033276011 1 4033266011 1 12.70 ±0.40 0.500 25.40 ±0.75 1.000 25.40 ±0.75 1.000 38.10 ±0.75 1.500 0.50 4033122011 3.25 -0.25 0.125 3.25 -0.25 0.125 6.35 ±0.25 0.250 6.35 ±0.25 0.250 0.90 3.90 5.80 Medium Permeability, 77 (µi=2000) & 78 (µi=2300) materials Part Number Fig. A B C Wt. (g) 4077122011 1 _ 1 4077272011 1 4077276011 1 4077292011 1 4077296011 1 4077266011 1 4077312911 1 4077374711 1 4078375111 1 4077375411 1 4077375211 1 4078377511 1 4077485111 1 4077484611 1 4277142009 2 4277242409 2 4278282509 2 4277352509 2 4277353509 2 4278453509 2 25.40 ±0.75 1.000 22.20 ±0.75 0.875 19.05 ±0.75 0.750 25.40 ±0.75 1.000 28.60 ±0.75 1.125 31.75 ±0.75 1.250 38.10 ±0.75 1.500 38.10 ±0.75 1.500 31.75 ±0.75 1.250 38.10 ±0.75 1.500 41.30 ±0.80 1.625 50.80 ±1.00 2.000 70.00 ±1.50 2.756 31.75 ±0.75 1.250 41.30 ±0.80 1.625 13.50 ±0.30 0.532 17.50 ±0.40 0.690 18.95 ±0.45 0.746 18.95 ±0.45 0.746 29.00 ±0.60 1.140 27.00 ±0.60 1.064 1.00 4077172011 3.25 -0.25 0.125 4.60 -0.30 0.175 6.35 ±0.25 0.250 6.35 ±0.25 0.250 6.35 ±0.25 0.250 6.35 ±0.25 0.250 6.35 ±0.25 0.250 8.00 ±0.35 0.315 9.45 ±0.20 0.372 9.45 ±0.20 0.372 9.45 ±0.20 0.372 9.45 ±0.20 0.372 9.50 ±0.25 0.374 12.30 ±0.40 0.485 12.30 ±0.40 0.485 9.00 ±0.30 0.354 13.00 ±0.30 0.512 17.00 ±0.40 0.670 21.00 ±0.50 0.825 21.00 ±0.50 0.825 27.00 ±0.50 1.063 _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3.20 ±0.10 0.126 3.20 ±0.10 0.126 4.20 ±0.15 0.165 6.90 ±0.40 0.272 6.90 ±0.40 0.272 9.00 ±0.30 0.354 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 94 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 1.70 2.90 3.80 4.40 4.80 5.80 9.20 11.00 13.00 14.00 17.00 24.00 18.00 27.00 3.60 10.00 19.40 28.00 43.00 66.00 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 95 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 96 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] These rods are designed for use in antenna and RFID transponder applications. Rods are available in three materials to cover a frequency range from 50 kHz to 25 MHz. Suggested frequency ranges: 78 material < 200 kHz, 61 material 0.2 - 5.0 MHz and 67 material > 5.0 MHz. • See graphs with temperature information of these rods in the rod information section. • Rods can be supplied with a Parylene C coating. Parylene coated rods have a “4” as the last digit. Parylene C is RoHS compliant. • For any rod requirement not listed here, feel free to contact our customer service group for availability and pricing. • The "Antenna/RFID Kit" (part number 0199000024) contains a selection of these rods. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, the last digit 1 = uncoated rod and 4 = Parylene coated rod. Legend Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches. ) Low Permeability, 67 (µi=40) material Part Number A C µROD Wt. (g) Ae(cm2) 3067990821 0.75 ±0.025 0.030 1.00 ±0.025 0.039 1.50 ±0.025 0.059 2.00 ±0.025 0.079 2.50 ±0.025 0.098 3.00 ±0.04 0.118 4.00 ±0.04 0.157 7.50 ±0.25 0.295 10.00 ±0.30 0.394 15.00 ±0.45 0.591 15.00 ±0.45 0.591 20.00 ±0.60 0.787 25.00 ±0.70 0.984 30.00 ±0.75 1.181 22 0.02 0.00442 22 0.04 0.00785 22 0.13 0.0177 18 0.23 0.0314 19 0.47 0.0491 20 0.85 0.0707 18 1.80 0.126 3067990831 3067990841 3067990851 3067990861 3067990871 3067990881 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 97 Low Permeability, 61 (µi=125) material Part Number A C µROD Wt. (g) Ae(cm2) 3061990821 0.75 ±0.025 0.030 1.00 ±0.025 0.039 1.50 ±0.025 0.059 2.00 ±0.025 0.079 2.50 ±0.025 0.098 3.00 ±0.04 0.118 4.00 ±0.04 0.157 5.00 ±0.04 0.197 6.00 ±0.05 0.236 8.00 ±0.05 0.315 7.50 ±0.25 0.295 10.00 ±0.30 0.394 15.00 ±0.45 0.591 15.00 ±0.45 0.591 20.00 ±0.60 0.787 25.00 ±0.70 0.984 30.00 ±0.75 1.181 35.00 ±0.80 1.378 40.00 ±0.80 1.575 45.00 ±0.90 1.772 35 0.02 0.00442 35 0.04 0.00785 35 0.13 0.0177 25 0.23 0.0314 27 0.47 0.0491 29 0.85 0.0707 25 1.80 0.126 24 3.30 0.196 22 5.40 0.283 18 11.90 0.503 3061990831 3061990841 3061990851 3061990861 3061990871 3061990881 3061990891 3061990901 3061990911 Medium Permeability, 78 (µi=2300) material Part Number A C µROD Wt. (g) Ae(cm2) 3078990821 0.75 ±0.025 0.030 1.00 ±0.025 0.039 1.50 ±0.025 0.059 2.00 ±0.025 0.079 2.50 ±0.025 0.098 3.00 ±0.04 0.118 4.00 ±0.04 0.157 5.00 ±0.04 0.197 6.00 ±0.05 0.236 8.00 ±0.05 0.315 7.50 ±0.25 0.295 10.00 ±0.30 0.394 15.00 ±0.45 0.591 15.00 ±0.45 0.591 20.00 ±0.60 0.787 25.00 ±0.70 0.984 30.00 ±0.75 1.181 35.00 ±0.80 1.378 40.00 ±0.80 1.575 45.00 ±0.90 1.772 48 0.02 0.00442 48 0.04 0.00785 48 0.13 0.0177 31 0.23 0.0314 34 0.47 0.0491 36 0.85 0.0707 31 1.80 0.126 29 3.30 0.196 26 5.40 0.283 20 11.90 0.503 3078990831 3078990841 3078990851 3078990861 3078990871 3078990881 3078990891 3078990901 3078990911 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 98 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Bobbins are an economical and well-proven core design for many applications where relatively low but stable inductance values are required. • For higher frequency designs, use small bobbins in 43 material. • For power applications, bobbins in 77 material are specified for AL and dc bias limits. • Bobbins in Figures 2-5 can be supplied with a uniform thermo-set plastic coating which can withstand a minimum breakdown of 500Vrms. This coating will change the dimensions a maximum of 0.5 mm (0.020"). The last digit of the thermo-set plastic coated part is an "8". • The listed dimensions are for assembled bobbins without thermo-set plastic. • Bobbins are tested for AL value at 1kHz < 10 gauss. • For any bobbin requirement not listed in the catalog, please contact our customer service group for availability and pricing, • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 8 = coated bobbin. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 99 High Frequency Designs Row # Part Number Fig. A B D F G H Wt. (g) (1) 9643001165 1 9643001015 1 (3) 9843000104 2 12.70 ±0.25 0.500 19.00 ±0.70 0.750 19.00 ±0.40 0.750 10.00 +0.30 0.400 12.70 ±0.15 0.500 12.70 ±0.25 0.500 2.65 +0.10 0.107 4.65 +0.20 0.187 5.55 +0.25 0.225 0.50 ±0.10 0.020 1.00 +0.25 0.045 2.70 +0.25 0.111 1.00 +0.10 0.042 1.03 +0.10 0.043 8.05 ±0.20 0.317 1.30 (2) 5.05 -0.15 0.196 9.55 -0.15 0.373 8.05 ±0.20 0.317 6.70 3.00 Table Continued ... Row # Part Number AL(nH) AL min. @ NI(At) N/AWG AW(cm2) (1) 9643001165 9643001015 9843000104 17.5 ±10% - 30/24 0.12 38.0 ±10% - 75/24 0.30 38.0 ±10% - 50/28 0.33 (2) (3) Power Applications Row # Part Number Fig. A B D F G H Wt. (g) (4) 9677001165 1 9677001015 1 (6) 9877000104 2 (7) 9877000204 3 (8) 9677142009 4 (9) 9677182009 4 (10) 9677182209 4 (11) 9677242009 4 (12) 9677242409 4 (13) 9677282009 4 (14) 9677282509 4 (15) 9677352509 4 (16) 9677353509 4 (17) 9677453509 4 12.70 ±0.25 0.500 19.00 ±0.70 0.750 19.00 ±0.40 0.750 25.00 ±0.50 0.984 20.00 ±0.70 0.788 20.00 ±0.70 0.788 22.00 ±0.70 0.866 20.00 ±0.70 0.788 24.00 ±0.70 0.946 20.00 ±0.70 0.788 25.00 ±0.70 0.985 25.00 ±0.70 0.985 35.00 ±0.75 1.380 35.00 ±0.75 1.380 10.00 +0.30 0.400 12.70 ±0.15 0.500 12.70 ±0.25 0.500 18.95 ±0.45 0.746 12.50 ±0.30 0.492 12.50 ±0.30 0.492 14.50 ±0.35 0.570 12.50 ±0.30 0.492 16.50 ±0.40 0.650 12.50 ±0.30 0.492 18.00 ±0.45 0.708 18.00 ±0.45 0.708 28.00 ±0.60 1.100 26.00 ±0.60 1.024 2.65 +0.10 0.107 4.65 +0.20 0.187 5.55 +0.25 0.225 7.50 ±0.25 0.295 9.00 ±0.30 0.354 11.00 ±0.30 0.433 11.00 ±0.30 0.433 13.00 ±0.30 0.512 13.00 ±0.30 0.512 17.00 ±0.40 0.670 17.00 ±0.40 0.670 21.00 ±0.50 0.825 21.00 ±0.50 0.825 27.00 ±0.50 1.063 0.50 ±0.10 0.020 1.00 +0.25 0.045 2.70 +0.25 0.111 7.45 ±0.25 0.293 2.00 ±0.30 0.079 2.50 ±0.30 0.098 2.50 ±0.30 0.098 3.00 ±0.30 0.118 3.00 ±0.30 0.118 3.00 ±0.30 0.118 3.00 ±0.30 0.118 3.00 ±0.30 0.118 3.00 ±0.30 0.118 3.60 ±0.30 0.142 1.00 +0.10 0.042 1.03 +0.10 0.043 8.05 ±0.20 0.317 11.40 ±0.40 0.449 3.20 ±0.10 0.126 3.20 ±0.10 0.126 3.20 ±0.10 0.126 3.20 ±0.10 0.126 3.20 ±0.10 0.126 4.20 ±0.15 0.165 4.20 ±0.15 0.165 6.90 ±0.40 0.272 6.90 ±0.40 0.272 9.00 ±0.30 0.354 1.30 (5) 5.05 -0.15 0.196 9.55 -0.15 0.373 8.05 ±0.20 0.317 11.30 ±0.25 0.445 14.00 ±0.35 0.551 18.00 ±0.45 0.709 18.00 ±0.45 0.709 24.00 ±0.60 0.945 24.00 ±0.60 0.945 28.00 ±0.70 1.102 28.00 ±0.70 1.102 35.00 ±0.90 1.381 35.00 ±0.90 1.381 45.00 ±1.00 1.771 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 100 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 6.70 3.00 8.40 8.50 13.00 14.00 22.00 24.00 33.00 38.00 56.00 71.00 127.00 Table Continued ... AL min. @ NI(At) N/AWG AW(cm2) 18 ±10% 15 - 90 30/24 0.12 39 ±10% 33 - 125 75/24 0.30 39 ±10% 33 - 125 36/24 0.33 49 ±10% 42 - 360 45/24 0.37 55 ±10% 47 - 325 81/28 0.31 66 ±10% 56 - 400 50/20 0.44 65 ±10% 55 - 410 95/22 0.51 88 ±10% 75 - 430 50/18 0.69 84 ±10% 72 - 450 67/18 0.91 100 ±10% 86 - 470 40/18 0.69 95 ±10% 81 - 520 55/18 0.99 124 ±10% 106 - 580 55/16 1.27 110 ±10% 94 - 700 70/16 1.97 142 ±10% 121 - 750 100/16 2.34 Row # Part Number AL(nH) (4) 9677001165 9677001015 9877000104 9877000204 9677142009 9677182009 9677182209 9677242009 9677242409 9677282009 9677282509 9677352509 9677353509 9677453509 (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 101 A ring configuration provides the ultimate utilization of the intrinsic ferrite material properties. Toroidal cores are used in a wide variety of applications such as power input filters, ground-fault interrupters, common-mode filters and in pulse and broadband transformers. • Toroids are listed by initial permeability classes and increasing dimension of the inside diameter. • All toroidal cores are supplied burnished to break sharp edges. • Toroids are tested for AL values at 10 kHz. • Toroids with an outside diameter of 9.5 mm (0.375") or smaller can be supplied Parylene C coated. The Parylene coating will increase the "A" and "C" dimensions and decrease the "B" dimension a maximum of 0.038 mm (0.0015"). The ninth digit of a Parylene coated toroid part number is a "1". See reference tables for the material characteristics of Parylene C. Parylene C coating is RoHS compliant. • Toroids with an outside diameter of 9.5 mm (0.375") or larger can be supplied with a uniform coating of thermo-set plastic coating. This coating will increase the "A" and "C" dimensions and decrease the "B" dimension a maximum of 0.5 mm (0.020"). The 9th digit of the thermo-set plastic coated toroid part number is a "2". Thermo-set plastic coating is RoHS compliant. • Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the "C" dimension of the toroid. • The “C” dimension may be modified to suit specific applications. • For any toroidal core requirement not listed in the catalog, please contact our customer service department for availability and pricing. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, 9th digit 1 = Parylene coating, 2 = thermo-set plastic coating. Legend: Symbols & Definition Low Permeability, 68 (µi=16) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5968020901 6.10 -0.25 0.235 9.50 ±0.20 0.374 12.70 ±0.25 0.500 12.70 ±0.25 0.500 22.10 ±0.40 0.870 29.95 ±0.65 1.179 3.12 ±0.10 0.123 4.75 ±0.15 0.187 7.15 ±0.20 0.281 7.90 ±0.20 0.311 13.70 ±0.30 0.539 19.45 ±0.50 0.766 1.65 -0.25 0.060 3.30 -0.25 0.125 4.90 -0.25 0.188 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.50 ±0.25 0.295 0.19 63.68 1.33 0.021 0.027 2.3 Min 0.83 28.60 2.07 0.073 0.15 5.3 Min 2.00 22.90 2.95 0.129 0.38 6.6 Min 2.40 20.80 3.12 0.15 0.47 7.2 Min 7.20 20.70 5.41 0.262 1.42 7.3 Min 21.80 19.39 7.52 0.388 2.917 7.7 Min 5968000201 5968000301 5968001101 5968001801 5968021001 e Ae(cm2) Ve(cm3) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 102 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] AL(nH) Low Permeability, 68 (µi=16) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5968002701 35.55 ±0.75 1.400 61.00 ±1.30 2.402 23.00 ±0.55 0.906 35.55 ±0.85 1.400 12.70 ±0.50 0.500 12.70 ±0.50 0.500 33.00 11.20 8.90 0.78 7.00 13 Min 106.00 9.20 14.50 1.58 22.80 16 Min 5968003801 e Ae(cm2) Ve(cm3) AL(nH) Low Permeability, 67 (µi=40) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5967000101 5.95 -0.25 0.230 9.50 ±0.20 0.375 12.70 ±0.25 0.500 12.70 ±0.25 0.500 12.70 ±0.25 0.500 21.00 ±0.35 0.825 22.10 ±0.40 0.870 29.00 ±0.65 1.142 29.00 ±0.65 1.142 31.75 ±0.75 1.250 35.55 ±0.75 1.400 62.80 Max 2.472 Max 61.00 ±1.30 2.400 3.05 ±0.10 0.120 4.75 ±0.15 0.187 7.15 ±0.20 0.281 7.90 ±0.20 0.312 7.90 ±0.20 0.312 13.20 ±0.30 0.520 13.70 ±0.30 0.540 19.00 ±0.50 0.748 19.00 ±0.50 0.748 19.05 ±0.50 0.750 23.00 ±0.55 0.900 34.20 Min 1.346 Min 35.55 ±0.85 1.400 1.65 -0.25 0.060 3.30 -0.25 0.125 4.90 -0.25 0.188 6.35 ±0.25 0.250 12.70 ±0.35 0.500 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.50 ±0.25 0.295 13.85 ±0.30 0.545 9.50 ±0.30 0.375 12.70 ±0.50 0.500 13.70 Max 0.539 Max 12.70 ±0.50 0.500 0.14 63.80 1.30 0.02 0.027 6 Min 0.83 28.60 2.07 0.072 0.15 2.00 22.90 2.95 0.129 0.38 2.40 20.80 3.12 0.15 0.47 4.70 10.40 3.12 0.299 0.93 6.40 21.30 5.20 0.243 1.26 7.20 20.70 5.40 0.262 1.42 13.00 19.80 7.30 0.37 2.70 26.00 10.70 7.30 0.68 5.00 23.00 12.90 7.60 0.59 4.50 33.00 11.20 8.90 0.79 7.00 106.00 9.20 14.50 1.58 22.80 106.00 9.20 14.50 1.58 22.80 18 +35%, -25% 22 +35%, -25% 24 +35%, -25% 48 +35%, -25% 24 +35%, -25% 24 +35%, -25% 25 +35%, -25% 47 +35%, -25% 39 +35%, -25% 45 +35%, -25% 55 +35%, -25% 55 +35%, -25% 5967000201 5967000301 5967001101 5967001901 5967000601 5967001801 5967001001 5967001201 5967001701 5967002701 5967003821 5967003801 e Ae(cm2) Ve(cm3) AL(nH) Low Permeability, 61 (µi=125) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5961000801 3.95 ±0.15 0.155 4.14 Max 0.162 Max 5.95 -0.25 0.230 5.99 Max 0.235 Max 9.50 ±0.20 0.375 9.74 Max 0.383 Max 10.20 Max 0.401 Max 12.70 ±0.25 0.500 2.15 +0.15 0.088 2.11 Min 0.084 Min 3.05 ±0.10 0.120 2.91 Min 0.115 Min 4.75 ±0.15 0.187 4.56 Min 0.180 Min 4.10 Min 0.162 Min 7.15 ±0.20 0.281 1.40 -0.25 0.050 1.44 Max 0.056 Max 1.65 -0.25 0.060 1.69 Max 0.066 Max 3.30 -0.25 0.125 3.34 Max 0.132 Max 3.80 Max 0.149 Max 4.90 -0.25 0.188 0.05 87.60 0.92 0.011 0.0097 15 Min 0.05 87.60 0.92 0.011 0.0097 15 Min 0.14 63.80 1.30 0.02 0.027 25 ±25% 0.14 63.80 1.30 0.02 0.027 25 ±25% 0.83 28.60 2.07 0.072 0.15 55 ±25% 0.83 28.60 2.07 0.072 0.15 55 ±25% 0.83 28.60 2.07 0.072 0.15 55 ±25% 2.00 22.90 2.95 0.129 0.38 69 ±25% 5961000811 5961000101 5961000111 5961000201 5961000211 5961000221 5961000301 e Ae(cm2) Ve(cm3) AL(nH) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 103 Low Permeability, 61 (µi=125) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5961000321 13.45 Max 0.529 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 16.00 ±0.40 0.630 16.90 Max 0.665 Max 21.00 ±0.35 0.825 21.85 Max 0.860 Max 21.00 ±0.35 0.825 22.10 ±0.40 0.870 23.00 Max 0.905 Max 29.00 ±0.65 1.142 30.15 Max 1.187 Max 29.00 ±0.65 1.142 30.15 Max 1.187 Max 31.75 ±0.75 1.250 33.00 Max 1.299 Max 35.55 ±0.75 1.400 36.80 Max 1.449 Max 61.00 ±1.30 2.400 62.80 Max 2.472 Max 6.45 Min 0.254 Min 7.90 ±0.20 0.312 7.20 Min 0.283 Min 7.90 ±0.20 0.312 7.20 Min 0.283 Min 9.60 ±0.30 0.378 8.80 Min 0.347 Min 13.20 ±0.30 0.520 12.40 Min 0.489 Min 13.20 ±0.30 0.520 13.70 ±0.30 0.540 12.90 Min 0.508 Min 19.00 ±0.50 0.748 18.00 Min 0.708 Min 19.00 ±0.50 0.748 18.00 Min 0.708 Min 19.05 ±0.50 0.750 18.05 Min 0.729 Min 23.00 ±0.55 0.900 21.95 Min 0.864 Min 35.55 ±0.85 1.400 34.20 Min 1.346 Min 5.40 Max 0.212 Max 6.35 ±0.25 0.250 7.10 Max 0.280 Max 12.70 ±0.35 0.500 13.55 Max 0.533 Max 6.35 ±0.25 0.250 7.10 Max 0.280 Max 6.35 ±0.25 0.250 7.10 Max 0.280 Max 11.90 ±0.40 0.468 6.35 ±0.25 0.250 7.10 Max 0.280 Max 7.50 ±0.25 0.295 8.25 Max 0.325 Max 13.85 ±0.30 0.545 14.65 Max 0.576 Max 9.50 ±0.30 0.375 10.30 Max 0.405 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 2.00 22.90 2.95 0.129 0.38 69 ±25% 2.40 20.80 3.12 0.15 0.47 75 ±25% 2.40 20.80 3.12 0.15 0.47 75 ±25% 4.70 10.40 3.12 0.299 0.93 150 ±25% 4.70 10.40 3.12 0.299 0.93 150 ±25% 4.00 19.40 3.85 0.199 0.77 80 ±25% 4.00 19.40 3.85 0.199 0.77 80 ±25% 6.40 21.30 5.20 0.243 1.26 75 ±25% 6.40 21.30 5.20 0.243 1.26 75 ±25% 12.00 11.40 5.20 0.46 2.36 135 ±25% 7.20 20.70 5.40 0.262 1.42 75 ±25% 7.20 20.70 5.40 0.262 1.42 75 ±25% 13.00 19.80 7.30 0.37 2.70 80 ±25% 13.00 19.80 7.30 0.37 2.70 80 ±25% 26.00 10.70 7.30 0.68 5.00 145 ±25% 26.00 10.70 7.30 0.68 5.00 145 ±25% 23.00 12.90 7.60 0.59 4.50 120 ±25% 23.00 12.90 7.60 0.59 4.50 120 ±25% 33.00 11.20 8.90 0.79 7.00 140 ±25% 33.00 11.20 8.90 0.79 7.00 140 ±25% 106.00 9.20 14.50 1.58 22.80 170 ±25% 106.00 9.20 14.50 1.58 22.80 170 ±25% 5961001101 5961001121 5961001901 5961001921 5961004901 5961004921 5961000601 5961000621 5961000501 5961001801 5961001821 5961001001 5961001021 5961001201 5961001221 5961001701 5961001721 5961002701 5961002721 5961003801 5961003821 e Ae(cm2) Ve(cm3) AL(nH) Low-Medium Permeability, 52 (µi=250) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5952020201 5.84 -0.26 0.225 9.42 ±0.20 0.371 12.60 ±0.25 0.496 12.45 ±0.25 0.490 3.00 ±0.10 0.118 4.72 ±0.15 0.186 6.99 ±0.20 0.275 7.80 ±0.20 0.307 1.65 -0.25 0.060 3.30 -0.25 0.125 4.90 -0.25 0.188 6.35 ±0.25 0.250 0.15 63.88 1.28 0.02 0.0256 49 ±25% 0.87 28.66 2.06 0.072 0.147 110 ±25% 2.16 22.31 2.90 0.13 0.378 141 ±25% 2.46 21.24 3.06 0.144 0.442 148 ±25% 5952020301 5952020401 5952020501 e Ae(cm2) Ve(cm3) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 104 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] AL(nH) Low-Medium Permeability, 52 (µi=250) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5952020601 21.70 ±0.40 0.854 28.80 ±0.65 1.134 35.25 ±0.75 1.388 60.00 ±1.30 2.362 13.50 ±0.30 0.531 18.70 ±0.50 0.736 22.60 ±0.55 0.890 35.35 ±0.60 1.392 6.35 ±0.25 0.250 7.50 ±0.25 0.250 12.70 ±0.50 0.500 12.70 ±0.50 0.500 7.54 20.80 5.33 0.256 1.368 151 ±25% 14.81 19.34 7.23 0.374 2.702 162 ±25% 38.26 11.10 8.79 0.792 6.959 283 ±25% 133.44 9.14 14.50 1.58 22.80 325 ±25% 5952020701 5952020801 5952003801 e Ae(cm2) Ve(cm3) AL(nH) Low-Medium Permeability, 43 (µi=800) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5943000801 3.95 ±0.15 0.155 5.95 -0.25 0.230 5.99 Max 0.235 Max 5.95 -0.25 0.230 5.99 Max 0.235 Max 9.50 ±0.20 0.375 9.74 Max 0.383 Max 10.20 Max 0.401 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 16.00 ±0.40 0.630 16.00 ±0.40 0.630 16.90 Max 0.665 Max 21.00 ±0.35 0.825 21.85 Max 0.860 Max 21.00 ±0.35 0.825 21.85 Max 0.860 Max 22.10 ±0.40 0.870 2.15 +0.15 0.088 3.05 ±0.10 0.120 2.91 Min 0.115 Min 3.05 ±0.10 0.120 2.91 Min 0.115 Min 4.75 ±0.15 0.187 4.56 Min 0.180 Min 4.10 Min 0.162 Min 7.15 ±0.20 0.281 6.45 Min 0.254 Min 7.90 ±0.20 0.312 7.20 Min 0.283 Min 7.90 ±0.20 0.312 7.20 Min 0.283 Min 9.60 ±0.30 0.378 9.60 ±0.30 0.378 8.80 Min 0.347 Min 13.20 ±0.30 0.520 12.40 Min 0.489 Min 13.20 ±0.30 0.520 12.40 Min 0.489 Min 13.70 ±0.30 0.540 1.40 -0.25 0.050 1.65 -0.25 0.060 1.69 Max 0.066 Max 3.05 ±0.10 0.120 3.19 Max 0.126 Max 3.30 -0.25 0.125 3.34 Max 0.132 Max 3.80 Max 0.149 Max 4.90 -0.25 0.188 5.40 Max 0.213 Max 6.35 ±0.25 0.250 7.10 Max 0.280 Max 12.70 ±0.35 0.500 13.55 Max 0.533 Max 4.75 -0.25 0.182 6.35 ±0.25 0.250 7.10 Max 0.280 Max 6.35 ±0.25 0.250 7.10 Max 0.280 Max 11.90 ±0.40 0.468 12.80 Max 0.503 Max 6.35 ±0.25 0.250 0.05 87.60 0.92 0.011 0.0097 117 ±20% 0.14 63.80 1.30 0.02 0.027 158 ±20% 0.14 63.80 1.30 0.02 0.027 158 ±20% 0.29 31.80 1.30 0.041 0.053 315 ±20% 0.29 31.80 1.30 0.041 0.053 315 ±20% 0.83 28.60 2.07 0.072 0.15 350 ±20% 0.83 28.60 2.07 0.072 0.15 350 ±20% 0.83 28.60 2.07 0.072 0.15 2.00 22.90 2.95 0.129 0.38 350 +20%, -25% 440 ±20% 2.00 22.90 2.95 0.129 0.38 2.40 20.80 3.12 0.15 0.47 2.40 20.80 3.12 0.15 0.47 4.70 10.40 3.12 0.299 0.93 4.70 10.40 3.12 0.299 0.93 2.80 26.60 3.85 0.145 0.56 965 +20%, -25% 375 ±20% 4.00 19.40 3.85 0.199 0.77 520 ±20% 4.00 19.40 3.85 0.199 0.77 6.40 21.30 5.20 0.243 1.26 520 +20%, -25% 470 ±20% 6.40 21.30 5.20 0.243 1.26 12.00 11.40 5.20 0.46 2.36 12.00 11.40 5.20 0.46 2.36 7.20 20.70 5.40 0.262 1.42 5943000101 5943000111 5943000901 5943000911 5943000201 5943000211 5943000221 5943000301 5943000321 5943001101 5943001121 5943001901 5943001921 5943005101 5943004901 5943004921 5943000601 5943000621 5943000501 5943000521 5943001801 e Ae(cm2) Ve(cm3) AL(nH) 440 +20%, -25% 480 ±20% 480 +20%, -25% 965 ±20% 470 +20%, -25% 885 ±20% 885 +20%, -25% 485 ±20% Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 105 Low-Medium Permeability, 43 (µi=800) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5943001821 23.00 Max 0.905 Max 22.10 ±0.40 0.870 25.40 ±0.60 1.000 25.40 ±0.60 1.000 26.50 Max 1.043 Max 25.40 ±0.60 1.000 26.50 Max 1.043 Max 29.00 ±0.65 1.142 30.15 Max 1.187 Max 29.00 ±0.65 1.142 31.10 ±0.75 1.225 31.75 ±0.75 1.250 35.55 ±0.75 1.400 36.80 Max 1.449 Max 43.60 ±1.00 1.717 48.30 ±1.00 1.902 61.00 ±1.30 2.400 62.80 Max 2.472 Max 73.65 ±1.50 2.900 75.85 Max 2.978 Max 100.00 ±2.00 3.937 102.60 ±2.10 4.039 12.90 Min 0.508 Min 13.70 ±0.30 0.540 15.50 ±0.50 0.610 15.50 ±0.50 0.610 14.50 Min 0.571 Min 15.50 ±0.50 0.610 14.50 Min 0.571 Min 19.00 ±0.50 0.748 18.00 Min 0.708 Min 19.00 ±0.50 0.748 19.05 ±0.50 0.750 19.05 ±0.50 0.750 23.00 ±0.55 0.900 21.95 Min 0.864 Min 23.10 ±0.50 0.909 31.80 ±0.60 1.252 35.55 ±0.85 1.400 34.20 Min 1.347 Min 38.85 ±0.75 1.530 37.60 Min 1.480 Min 55.00 ±1.20 2.165 63.50 ±1.30 2.500 7.10 Max 0.279 Max 12.70 ±0.45 0.500 6.35 ±0.25 0.250 8.15 ±0.30 0.320 8.95 Max 0.352 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 7.50 ±0.25 0.295 8.25 Max 0.325 Max 13.85 ±0.30 0.545 7.90 ±0.30 0.312 9.50 ±0.30 0.375 12.70 ±0.50 0.500 13.70 Max 0.539 Max 18.00 ±0.50 0.709 19.05 ±0.35 0.750 12.70 ±0.50 0.500 13.70 Max 0.539 Max 12.70 ±0.40 0.500 13.60 Max 0.535 Max 12.70 ±0.30 0.500 15.85 ±0.35 0.624 7.20 20.70 5.40 0.262 1.42 15.00 10.30 5.40 0.52 2.83 485 +20%, -25% 970 ±20% 9.60 20.00 6.20 0.308 1.90 500 ±20% 12.00 15.10 6.20 0.41 2.52 645 ±20% 12.00 15.10 6.20 0.41 2.52 19.00 10.00 6.20 0.62 3.80 645 +20%, -25% 1000 ±20% 19.00 10.00 6.20 0.62 3.80 13.00 19.80 7.30 0.37 2.70 13.00 19.80 7.30 0.37 2.70 26.00 10.70 7.30 0.68 5.00 510 +20%, -25% 950 ±20% 18.00 16.20 7.60 0.47 3.53 620 ±20% 23.00 12.90 7.60 0.59 4.50 775 ±20% 33.00 11.20 8.90 0.79 7.00 885 ±20% 33.00 11.20 8.90 0.79 7.00 90.00 5.50 9.80 1.78 17.50 885 +20%, -25% 1850 ±25% 94.00 7.90 12.20 1.55 18.90 1275 ±25% 106.00 9.20 14.50 1.58 22.80 1075 ±20% 106.00 9.20 14.50 1.58 22.80 188.00 7.80 16.70 2.15 35.90 1075 +20%, -25% 1300 ±25% 188.00 7.80 16.70 2.15 35.90 320.00 8.30 23.00 2.77 63.70 1300 +25%, -30% 1215 ±25% 360.00 8.30 25.10 3.00 70.50 1225 ±25% 5943007601 5943001301 5943001401 5943001421 5943006401 5943006421 5943001001 5943001021 5943001201 5943001601 5943001701 5943002701 5943002721 5943018601 5943017301 5943003801 5943003821 5943011101 5943011121 5943015901 5943017501 e Ae(cm2) Ve(cm3) AL(nH) 1000 +20%, -25% 510 ±20% Medium Permeability, 77 (µi=2000) & 78 (µi=2300) materials Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5978002101 4.95 -0.25 0.190 5.95 -0.25 0.230 9.50 ±0.20 0.375 9.74 Max 0.383 Max 2.20 +0.15 0.090 3.05 ±0.10 0.120 4.75 ±0.15 0.187 4.56 Min 0.180 Min 1.40 -0.25 0.050 1.65 -0.25 0.060 3.30 -0.25 0.125 3.34 Max 0.131 Max 0.09 69.20 1.04 0.015 0.0157 440 ±25% 0.14 63.80 1.30 0.02 0.027 420 ±25% 0.83 28.60 2.07 0.072 0.15 945 ±25% 0.83 28.60 2.07 0.072 0.15 945 ±25% 5977000101 5977000201 5977000211 e Ae(cm2) Ve(cm3) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 106 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] AL(nH) Medium Permeability, 77 (µi=2000) & 78 (µi=2300) materials Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5977000221 10.20 Max 0.401 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 16.00 ±0.40 0.630 16.00 ±0.40 0.630 21.00 ±0.35 0.825 21.85 Max 0.860 Max 21.00 ±0.35 0.825 22.10 ±0.40 0.870 23.00 Max 0.905 Max 22.10 ±0.40 0.870 22.10 ±0.40 0.870 23.00 Max 0.905 Max 25.40 ±0.60 1.000 26.50 Max 1.043 Max 25.40 ±0.60 1.000 26.50 Max 1.043 Max 25.40 ±0.60 1.000 29.00 ±0.65 1.142 30.15 Max 1.187 Max 29.00 ±0.65 1.142 30.15 Max 1.187 Max 29.00 ±0.65 1.142 30.15 Max 1.187 Max 31.10 ±0.75 1.225 32.25 Max 1.273 Max 31.75 ±0.75 1.250 4.10 Min 0.162 Min 7.15 ±0.20 0.281 6.45 Min 0.254 Min 7.90 ±0.20 0.312 7.20 Min 0.284 Min 7.90 ±0.20 0.312 7.20 Min 0.284 Min 9.60 ±0.30 0.378 9.60 ±0.30 0.378 13.20 ±0.30 0.520 12.40 Min 0.489 Min 13.20 ±0.30 0.520 13.70 ±0.30 0.540 12.90 Min 0.508 Min 13.70 ±0.30 0.540 13.70 ±0.30 0.540 12.90 Min 0.508 Min 15.50 ±0.50 0.610 14.50 Min 0.571 Min 15.50 ±0.50 0.610 14.50 Min 0.571 Min 15.50 ±0.50 0.610 19.00 ±0.50 0.748 18.00 Min 0.709 Min 19.00 ±0.50 0.748 18.00 Min 0.709 Min 19.00 ±0.50 0.748 18.00 Min 0.709 Min 19.05 ±0.50 0.750 18.05 Min 0.711 Min 19.05 ±0.50 0.750 3.80 Max 0.149 Max 4.90 -0.25 0.188 5.40 Max 0.212 Max 6.35 ±0.25 0.250 7.10 Max 0.279 Max 12.70 ±0.35 0.500 13.55 Max 0.533 Max 4.75 -0.25 0.182 6.35 ±0.25 0.250 6.35 ±0.25 0.250 7.10 Max 0.279 Max 11.90 ±0.40 0.468 6.35 ±0.25 0.250 7.10 Max 0.279 Max 12.70 ±0.45 0.500 12.70 ±0.45 0.500 13.65 Max 0.537 Max 6.35 ±0.25 0.250 7.10 Max 0.279 Max 8.15 ±0.30 0.320 8.95 Max 0.352 Max 12.70 ±0.50 0.500 7.50 ±0.25 0.295 8.25 Max 0.324 Max 13.85 ±0.30 0.545 14.65 Max 0.576 Max 13.85 ±0.30 0.545 14.65 Max 0.576 Max 7.90 ±0.30 0.312 8.70 Max 0.342 Max 9.50 ±0.30 0.375 0.83 28.60 2.07 0.072 0.15 2.00 22.90 2.95 0.129 0.38 2.00 22.90 2.95 0.129 0.38 2.40 20.80 3.12 0.15 0.47 2.40 20.80 3.12 0.15 0.47 4.70 10.40 3.12 0.299 0.93 4.70 10.40 3.12 0.299 0.93 2.80 26.60 3.85 0.145 0.56 2595 +25%, -30% 1015 ±25% 4.00 19.40 3.85 0.199 0.77 1400 ±25% 6.40 21.30 5.20 0.243 1.26 1270 ±25% 6.40 21.30 5.20 0.243 1.26 12.00 11.40 5.20 0.46 2.36 1270 +25%, -30% 2375 ±25% 7.20 20.70 5.40 0.262 1.42 1305 ±25% 7.20 20.70 5.40 0.262 1.42 15.00 10.30 5.40 0.52 2.83 1305 +25%, -30% 2615 ±25% 15.00 10.30 5.40 0.52 2.83 2795 ±25% 15.00 10.30 5.40 0.52 2.83 9.60 20.00 6.20 0.308 1.90 2795 +25%, -30% 1350 ±25% 9.60 20.00 6.20 0.308 1.90 12.00 15.10 6.20 0.41 2.52 12.00 15.10 6.20 0.41 2.52 19.00 10.00 6.20 0.62 3.80 1730 +25%, -30% 2700 ±25% 13.00 19.80 7.30 0.37 2.70 1365 ±25% 13.00 19.80 7.30 0.37 2.70 26.00 10.70 7.30 0.68 5.00 1365 +25%, -30% 2520 ±25% 26.00 10.70 7.30 0.68 5.00 26.00 10.70 7.30 0.68 5.00 26.00 10.70 7.30 0.68 5.00 18.00 16.20 7.60 0.47 3.53 18.00 16.20 7.60 0.47 3.53 23.00 12.90 7.60 0.59 4.50 5977000301 5977000321 5977001101 5977001121 5977001901 5977001921 5977005101 5977004901 5977000601 5977000621 5977000501 5977001801 5977001821 5977007601 5978007601 5978007621 5977001301 5977001321 5977001401 5977001421 5977006401 5977001001 5977001021 5977001201 5977001221 5978001201 5978001221 5977001601 5977001621 5977001701 e Ae(cm2) Ve(cm3) AL(nH) 945 +25%, -30% 1180 ±25% 1180 +25%, -30% 1300 ±25% 1300 +25%, -30% 2595 ±25% 1350 +25%, -30% 1730 ±25% 2520 +25%, -30% 2695 ±25% 2695 +25%, -30% 1665 ±25% 1665 +25%, -30% 2090 ±25% Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 107 Medium Permeability, 77 (µi=2000) & 78 (µi=2300) materials Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5977001721 33.00 Max 1.299 Max 31.75 ±0.75 1.250 33.00 Max 1.299 Max 35.55 ±0.75 1.400 36.80 Max 1.448 Max 35.55 ±0.75 1.400 36.80 Max 1.448 Max 43.60 ±1.00 1.717 48.30 ±1.00 1.902 49.80 Max 1.960 Max 56.30 ±1.20 2.217 58.00 Max 2.283 Max 61.00 ±1.30 2.400 62.80 Max 2.472 Max 61.00 ±1.30 2.400 62.80 Max 2.472 Max 73.65 ±1.50 2.900 75.65 Max 2.978 Max 73.65 ±1.50 2.900 100.00 ±2.00 3.937 154.20 ±3.81 6.070 101.60 ±2.10 4.000 18.05 Min 0.711 Min 19.05 ±0.50 0.750 18.05 Min 0.711 Min 23.00 ±0.55 0.900 21.95 Min 0.865 Min 23.00 ±0.55 0.900 21.95 Min 0.865 Min 23.10 ±0.50 0.909 31.80 ±0.60 1.252 30.70 Min 1.209 Min 32.70 ±0.70 1.287 31.50 Min 1.240 Min 35.55 ±0.85 1.400 34.20 Min 1.347 Min 35.55 ±0.85 1.400 34.20 Min 1.347 Min 38.85 ±0.75 1.530 37.60 Min 1.480 Min 38.85 ±0.75 1.530 55.00 ±1.20 2.165 69.40 ±1.73 2.732 75.20 ±1.50 2.961 10.30 Max 0.405 Max 9.50 ±0.30 0.375 10.30 Max 0.405 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 18.00 ±0.50 0.709 19.05 ±0.35 0.750 19.90 Max 0.783 Max 18.00 ±0.50 0.709 19.00 Max 0.748 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 12.70 ±0.40 0.500 13.60 Max 0.535 Max 12.70 ±0.40 0.500 12.70 ±0.30 0.500 19.05 ±0.50 0.750 24.75 ±0.55 0.974 23.00 12.90 7.60 0.59 4.50 23.00 12.90 7.60 0.59 4.50 23.00 12.90 7.60 0.59 4.50 33.00 11.20 8.90 0.79 7.00 33.00 11.20 8.90 0.79 7.00 33.00 11.20 8.90 0.79 7.00 33.00 11.20 8.90 0.79 7.00 90.00 5.50 9.80 1.78 17.50 2545 +25%, -30% 5260 ±25% 94.00 7.90 12.20 1.55 18.90 3670 ±25% 94.00 7.90 12.20 1.55 18.90 135.00 6.40 13.30 2.07 27.60 3670 +25%, -30% 4500 ±25% 135.00 6.40 13.30 2.07 27.60 106.00 9.20 14.50 1.58 22.80 106.00 9.20 14.50 1.58 22.80 106.00 9.20 14.50 1.58 22.80 106.00 9.20 14.50 1.58 22.80 188.00 7.80 16.70 2.15 35.90 188.00 7.80 16.70 2.15 35.90 188.00 7.80 16.70 2.15 35.90 3500 +25%, -30% 3740 ±25% 320.00 8.30 23.00 2.77 63.70 3500 ±25% 1240.00 4.10 31.30 7.60 237.00 7000 ±25% 425.00 8.40 27.40 3.24 88.70 3425 ±25% 5978001701 5978001721 5977002701 5977002721 5978002701 5978002721 5978018601 5978017301 5978017321 5978018701 5978018721 5977003801 5977003821 5978003801 5978003821 5977011101 5977011121 5978011101 5978015901 5978008001 5978014001 e Ae(cm2) Ve(cm3) AL(nH) 2090 +25%, -30% 2230 ±25% 2230 +25%, -30% 2400 ±25% 2400 +25%, -30% 2545 ±25% 4500 +25%, -30% 2950 ±25% 2950 +25%, -30% 3155 ±25% 3155 +25%, -30% 3500 ±25% High Permeability, 75 (µi=5000) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5975000801 3.95 ±0.15 0.155 4.95 -0.25 0.190 5.95 -0.25 0.230 9.50 ±0.20 0.375 2.15 +0.15 0.088 2.20 +0.15 0.090 3.05 ±0.10 0.120 4.75 ±0.15 0.187 1.40 -0.25 0.050 1.40 -0.25 0.050 1.65 -0.25 0.060 3.30 -0.25 0.125 0.05 87.60 0.92 0.011 0.0097 585 ±20% 0.09 69.20 1.04 0.015 0.0157 770 ±20% 0.14 63.80 1.30 0.02 0.027 785 ±20% 0.83 28.60 2.07 0.072 0.15 2200 ±20% 5975002101 5975000101 5975000201 e Ae(cm2) Ve(cm3) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 108 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] AL(nH) High Permeability, 75 (µi=5000) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5975000211 9.74 Max 0.383 Max 10.20 Max 0.401 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 12.70 ±0.25 0.500 13.45 Max 0.529 Max 12.70 ±0.25 0.500 16.00 ±0.40 0.630 16.00 ±0.40 0.630 16.90 Max 0.665 Max 21.00 ±0.35 0.825 21.85 Max 0.860 Max 21.00 ±0.35 0.825 22.10 ±0.40 0.870 23.00 Max 0.905 Max 22.10 ±0.40 0.870 23.00 Max 0.905 Max 25.40 ±0.60 1.000 25.40 ±0.60 1.000 35.55 ±0.75 1.400 50.40 Max 1.984 Max 50.40 Max 1.984 Max 61.00 ±1.30 2.400 62.80 Max 2.472 Max 73.65 ±1.50 2.900 75.65 Max 2.978 Max 4.56 Min 0.180 Min 4.10 Min 0.162 Min 7.15 ±0.20 0.281 6.45 Min 0.254 Min 7.90 ±0.20 0.312 7.20 Min 0.284 Min 7.90 ±0.20 0.312 9.60 ±0.30 0.378 9.60 ±0.30 0.378 8.80 Min 0.347 Min 13.20 ±0.30 0.520 12.40 Min 0.489 Min 13.20 ±0.30 0.520 13.70 ±0.30 0.540 12.90 Min 0.508 Min 13.70 ±0.30 0.540 12.90 Min 0.508 Min 15.50 ±0.50 0.610 15.50 ±0.50 0.610 23.00 ±0.55 0.900 32.50 Min 1.278 Min 32.50 Min 1.278 Min 35.55 ±0.85 1.400 34.20 Min 1.347 Min 38.85 ±075 1.530 37.60 Min 1.481 Min 3.34 Max 0.132 Max 3.80 Max 0.149 Max 4.90 -0.25 0.188 5.40 Max 0.212 Max 6.35 ±0.25 0.250 7.10 Max 0.280 Max 12.70 ±0.35 0.500 4.75 -0.25 0.182 6.35 ±0.25 0.250 7.10 Max 0.280 Max 6.35 ±0.25 0.250 7.10 Max 0.280 Max 11.90 ±0.40 0.468 6.35 ±0.25 0.250 7.10 Max 0.280 Max 12.70 ±0.45 0.500 13.65 Max 0.537 Max 8.15 ±0.30 0.320 12.70 ±0.50 0.500 12.70 ±0.50 0.500 16.85 Max 0.663 Max 20.00 Max 0.787 Max 12.70 ±0.50 0.500 13.70 Max 0.539 Max 12.70 ±0.40 0.500 13.60 Max 0.535 Max 0.83 28.60 2.07 0.072 0.15 2200 ±20% 0.83 28.60 2.07 0.072 0.15 2.00 22.90 2.95 0.129 0.38 2200 +20%, -25% 2725 ±20% 2.00 22.90 2.95 0.129 0.38 2.40 20.80 3.12 0.15 0.47 2.40 20.80 3.12 0.15 0.47 4.70 10.40 3.12 0.299 0.93 3000 +20%, -25% 6000 ±20% 2.80 26.60 3.85 0.145 0.56 2350 ±20% 4.00 19.40 3.85 0.199 0.77 3225 ±20% 4.00 19.40 3.85 0.199 0.77 6.40 21.30 5.20 0.243 1.26 3225 +20%, -25% 2950 ±20% 6.40 21.30 5.20 0.243 1.26 12.00 11.40 5.20 0.46 2.36 2950 +20%, -25% 5500 ±20% 7.20 20.70 5.40 0.262 1.42 3025 ±20% 7.20 20.70 5.40 0.262 1.42 15.00 10.30 5.40 0.52 2.83 3025 +20%, -25% 6100 ±20% 15.00 10.30 5.40 0.52 2.83 12.00 15.10 6.20 0.41 2.52 6100 +20%, -25% 4000 ±20% 19.00 10.00 6.20 0.62 3.80 6250 ±20% 33.00 11.20 8.90 0.79 7.00 5500 ±25% 76.00 10.59 12.70 1.20 15.30 91.00 8.86 12.70 1.44 18.27 106.00 9.20 14.50 1.58 22.80 6500 +25%, -30% 7770 +25%, -30% 6850 ±25% 106.00 9.20 14.50 1.58 22.80 188.00 7.80 16.70 2.15 35.90 188.00 7.80 16.70 2.15 35.90 5975000221 5975000301 5975000321 5975001101 5975001121 5975001901 5975005101 5975004901 5975004921 5975000601 5975000621 5975000501 5975001801 5975001821 5975007601 5975007621 5975001401 5975006401 5975002701 5975021921 5975022021 5975003801 5975003821 5975011101 5975011121 e Ae(cm2) Ve(cm3) AL(nH) 2725 +20%, -25% 3000 ±20% 6850 +25%, -30% 8100 ±25% 8100 +25%, -30% Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 109 High Permeability, 76 (µi=10,000) material Part Number A B C Wt. (g) ∑l /A(cm-1) l (cm) 5976000801 3.95 ±0.15 0.155 5.95 -0.25 0.230 9.50 ±0.20 0.375 9.74 Max 0.383 Max 10.20 Max 0.401 Max 30.10 Max 1.185 Max 50.40 Max 1.984 Max 75.65 Max 2.978 Max 2.15 +0.15 0.088 3.05 ±0.10 0.120 4.75 ±0.15 0.187 4.56 Min 0.180 Min 4.10 Min 0.162 Min 17.90 Min 0.705 Min 32.50 Min 1.278 Min 37.60 Min 1.481 Min 1.40 -0.25 0.050 1.65 -0.25 0.060 3.30 -0.25 0.125 3.34 Max 0.132 Max 3.80 Max 0.149 Max 16.00 Max 0.629 Max 20.00 Max 0.787 Max 13.60 Max 0.535 Max 0.05 87.60 0.92 0.011 0.0097 1430 ±30% 0.14 63.80 1.30 0.02 0.027 1950 ±30% 0.83 28.60 2.07 0.072 0.15 4400 ±30% 0.83 28.60 2.07 0.072 0.15 0.83 28.60 2.07 0.072 0.15 27.50 9.78 7.32 0.749 5.48 91.00 8.86 12.70 1.44 18.27 188.00 7.80 16.50 2.14 35.30 4400 ±30% 4400 +30%, -35% 12800 ±30% 14200 ±30% 16000 ±30% 5976000101 5976000201 5976000211 5976000221 5976022121 5976022021 5976011121 e Ae(cm2) Ve(cm3) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 110 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] AL(nH) EE14/7, EE18/8, EE22/11, EE32/13, EE38/16, EE43/19, EE64/21 EI 14/5, EI 18/6, EI 22/7, EI 32/10, E 64/15 ER9.5, ER11, ER14.5 Planar EE and EI cores, with their low profile are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar ER cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications. • Planar EE, ER and EI cores can be supplied with the center post gapped to a mechanical dimension, or an AL value. • AL value is measured at 1 kHz, B < 10 gauss. • Weight indicated is per pair or set. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 111 Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number (1) 9478201002 9498201002 9495201002 9478202002 9498202002 9495202002 9478203002 9498203002 9495203002 9478204002 9498204002 9495204002 9478205002 9498205002 9495205002 9478206002 9498206002 9495206002 9478207002 9498207002 9495207002 7878400121 7898400121 7895400121 7878400221 7898400221 7895400221 7878400321 7898400321 7895400321 7878400421 7898400421 7895400421 7878400721 7898400721 7895400721 9578100502 9598100502 9595100502 9578110502 9598110502 9595110502 9578150602 9598150602 9595150602 (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) Fig. Generic Size A B C D E F Phone: Wt. (g) per Set 1 EE14/7 14.00 ± 0.3 0.551 3.50 ± 0.1 0.138 5.00 ± 0.15 0.197 1.90 min 0.075 min 10.52 min 0.414 min 3.00 ± 0.3 0.118 1.20 1 EE18/8 18.00 ± 0.4 0.709 4.00 ± 0.1 0.157 10.00 ± 0.2 0.394 1.80 min 0.071 min 13.70 min 0.539 min 4.00 ± 0.1 0.157 4.80 1 EE22/11 21.80 ± 0.4 0.858 5.70 ± 0.2 0.224 15.80 ± 0.35 0.622 3.20 ± 0.2 0.126 16.80 ± 0.4 0.661 5.00 ± 0.2 0.197 13.00 1 EE32/13 31.75 ± 0.65 1.250 6.35 ± 0.2 0.250 20.35 ± 0.45 0.801 3.18 ± 0.2 0.125 24.50 min 0.965 min 6.35 ± 0.15 0.250 26.00 1 EE38/16 38.10 ± 0.8 1.500 8.25 ± 0.25 0.325 25.40 ± 0.5 1.000 4.45 ± 0.25 0.175 30.23 min 1.190 min 7.60 ± 0.2 0.299 50.00 1 EE43/19 43.20 ± 0.6 1.701 9.55 ± 0.3 0.376 27.90 ± 0.4 1.098 5.70 ± 0.3 0.224 34.40 min 1.354 min 8.15 ± 0.3 0.321 70.00 1 EE64/21 64.00 ± 1 2.520 10.35 ± 0.15 0.407 51.00 ± 0.8 2.008 5.30 ± 0.25 0.209 53.80 ± 1 2.118 10.30 ± 0.2 0.406 200.00 2 EI 14/5 14.00 ± 0.3 0.551 3.50 ± 0.1 0.138 5.00 ± 0.15 0.197 1.90 min 0.075 min 10.52 min 0.414 min 3.00 ± 0.1 0.118 1.80 ± 0.1 0.071 1.10 2 EI 18/6 18.00 ± 0.35 0.709 4.00 ± 0.15 0.157 10.00 ± 0.3 0.394 1.80 min 0.071 min 13.70 min 0.539 min 4.00 ± 0.2 0.157 2.40 ± 0.15 0.094 4.10 2 EI 22/8 21.80 ± 0.4 0.858 5.70 ± 0.15 0.224 15.80 ± 0.35 0.622 3.20 ± 0.15 0.126 16.80 ± 0.4 0.661 5.00 ± 0.2 0.197 2.50 ± 0.15 0.098 10.50 2 EI 32/10 31.75 ± 0.5 1.250 6.35 ± 0.15 0.250 20.32 ± 0.4 0.800 3.18 ± 0.15 0.125 24.50 min 0.965 min 6.35 ± 0.2 0.250 3.18 ± 0.15 0.125 24.00 2 EI 64/15 64.00 ± 1 2.520 10.35 ± 0.15 0.407 51.00 ± 0.8 2.008 5.30 ± 0.25 0.209 53.80 ± 1 2.118 10.30 ± 0.2 0.406 5.08 ± 0.2 0.200 178.00 3 ER9.5 9.35 ± 0.3 0.368 2.45 ± 0.15 0.096 4.90 ± 0.2 0.193 1.68 ± 0.11 0.066 7.65 ± 0.3 0.301 3.40 ± 0.15 0.134 7.00 min 0.276 min 0.70 3 ER11 10.80 ± 0.3 0.425 2.45 ± 0.15 0.096 5.90 ± 0.2 0.232 1.58 ± 0.16 0.062 8.85 ± 0.3 0.348 4.15 ± 0.2 0.163 7.90 min 0.312 min 1.00 4 ER14.5 14.50 ± 0.2 0.571 2.95 ± 0.1 0.116 6.70 ± 0.1 0.264 1.65 ± 0.1 0.065 11.80 ± 0.2 0.465 4.70 ± 0.1 0.185 n/a n/a 1.80 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 112 G (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 9478201002 9498201002 9495201002 9478202002 9498202002 9495202002 9478203002 9498203002 9495203002 9478204002 9498204002 9495204002 9478205002 9498205002 9495205002 9478206002 9498206002 9495206002 9478207002 9498207002 9495207002 7878400121 7898400121 7895400121 7878400221 7898400221 7895400221 7878400321 7898400321 7895400321 7878400421 7898400421 7895400421 7878400721 7898400721 7895400721 9578100502 9598100502 9595100502 9578110502 9598110502 9595110502 9578150602 9598150602 9595150602 13.40 2.01 0.153 0.315 0.15 1050 ±25% 1100 ±25% 1300 ±25% 6.00 2.43 0.395 0.96 0.39 2600 ±25% 2700 ±25% 3300 ±25% 4.10 3.24 0.79 2.56 0.79 4500 ±25% 4600 ±25% 5500 ±25% 3.20 4.17 1.29 5.38 1.27 6200 ±25% 6400 ±25% 7600 ±25% 3.00 5.29 1.90 10.10 1.80 8200 ±25% 8800 ±25% 10100 ±25% 2.80 6.21 2.21 13.70 2.15 7300 ±25% 7200 ±25% 9500 ±25% 1.54 8.07 5.20 41.50 5.15 14800 ±25% 14800 ±25% 18000 ±25% 10.90 1.66 0.152 0.252 0.15 1440 ±25% 1440 ±25% 1600 ±25% 4.90 2.05 0.421 0.863 0.40 3200 ±25% 3300 ±25% 3800 ±25% 3.30 2.61 0.79 2.06 0.79 5400 ±25% 5500 ±25% 6200 ±25% 2.70 3.52 1.30 4.57 1.29 7200 ±25% 7300 ±25% 8700 ±25% 1.40 7.00 5.18 36.30 5.15 16900 ±25% 18000 ±25% 22200 ±25% 15.20 1.361 0.0893 0.122 0.076 900 ±25% 900 ±25% 950 ±25% 11.20 1.40 0.126 0.177 0.103 1200 ±25% 1250 ±25% 1350 ±25% 10.80 1.90 0.176 0.333 0.17 1400 ±25% 1430 ±25% 1610 ±25% (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 113 P9/5S, P11/7S, P14/8, P18/11, P22/13, P26/16, P30/19, P36/22 Pot cores have found application in all types of inductive devices. The core configuration provides a high degree of selfshielding. It also facilitates gapping to enhance utility for a variety of magnetic designs. Figure 2 Figure 1 • Pot cores can be supplied with the center post gapped to a mechanical dimension or an AL value. • AL value is measured at 1 kHz, B < 10 gauss. • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number (1) 5678090621 5698090621 5695090621 5678110821 5698110821 5695110821 5678140921 5698140921 5695140921 5678181221 5698181221 5695181221 5678221421 5698221421 5695221421 5678261721 5698261721 5695261721 5678302021 5698302021 5695302021 5678362321 5698362321 5695362321 (2) (3) (4) (5) (6) (7) (8) Fig. Generic Size A B C D E F G Phone: Wt. (g) per Set 1 P9/5S 9.15 ±0.15 0.360 2.65 ±0.1 0.104 5.65 ±0.15 0.222 1.80 min 0.071 min 7.50 min 0.295 min 3.80 ±0.1 0.150 2.10 ±0.3 0.083 1.00 1 P11/7S 11.10 ±0.2 0.437 3.30 ±0.1 0.130 6.80 ±0.25 0.268 2.30 ±0.15 0.091 9.20 ±0.2 0.362 4.60 ±0.1 0.181 2.20 ±0.3 0.087 1.90 2 P14/8 14.00 ±0.3 0.551 4.20 ±0.2 0.165 9.55 ±0.3 0.376 3.10 ±0.2 0.122 11.80 ±0.4 0.465 5.90 ±0.2 0.232 3.30 ±0.6 0.130 2.90 ±0.3 0.114 3.20 2 P18/11 18.00 ±0.4 0.709 5.35 ±0.15 0.211 13.40 ±0.4 0.528 3.80 ±0.2 0.150 14.90 min 0.587 min 7.45 ±0.15 0.293 4.00 ±0.3 0.157 3.20 ±0.2 0.126 6.00 2 P22/13 21.60 ±0.4 0.850 6.70 ±0.1 0.264 14.90 ±1.6 0.587 4.70 ±0.15 0.185 18.20 ±0.4 0.717 9.25 ±0.15 0.364 3.70 ±0.7 4.55 ±0.15 12.00 0.146 0.179 2 P26/16 25.50 ±0.5 1.004 8.05 ±0.15 0.317 17.20 ±0.5 0.677 5.65 ±0.2 0.222 21.60 ±0.4 0.850 11.10 ±0.3 0.437 4.15 ±0.5 5.40 ±0.25 20.00 0.163 0.213 2 P30/19 30.00 ±0.5 1.181 9.40 ±0.2 0.370 20.60 min 0.811 min 6.60 ±0.2 0.260 25.00 min 0.984 min 13.30 ±0.2 0.524 3.68 min 0.145 min 2 P36/22 35.60 ±0.6 1.402 10.90 ±0.2 0.429 26.20 ±0.6 1.031 7.60 ±0.3 0.299 29.50 min 1.161 min 15.90 ±0.3 0.626 5.15 ±0.4 5.45 ±0.25 54.00 0.203 0.215 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 114 H (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 5.60 ±0.2 0.220 34.00 Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 5678090621 5698090621 5695090621 5678110821 5698110821 5695110821 5678140921 5698140921 5695140921 5678181221 5698181221 5695181221 5678221421 5698221421 5695221421 5678261721 5698261721 5695261721 5678302021 5698302021 5695302021 5678362321 5698362321 5695362321 12.00 1.35 0.112 0.152 0.09 1300 ±25% 1250 ±25% 1400 ±25% 9.50 1.65 0.173 0.284 0.145 1680 ±25% 1750 ±25% 1900 ±25% 7.90 1.98 0.251 0.495 0.198 1950 ±25% 1950 ±25% 2100 ±25% 6.00 2.59 0.43 1.12 0.36 2600 ±25% 2700 ±25% 3400 ±25% 4.80 3.12 0.648 2.00 0.51 4000 ±25% 4100 ±25% 5000 ±25% 4.40 3.80 0.867 3.31 0.74 4800 ±25% 5000 ±25% 5500 ±25% 3.56 4.53 1.27 5.75 1.14 5700 ±25% 5800 ±25% 7500 ±25% 2.90 5.53 1.84 9.78 1.64 8300 ±25% 8500 ±25% 10000 ±25% (2) (3) (4) (5) (6) (7) (8) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 115 RM4, RM5, RM6, RM8, RM10, RM12, RM14 RM (Rectangular Modulus) cores allow better shielding than E type geometries while also providing easier winding accessibility and better power dissipation than a pot core configuration. Fair-Rite’s standard RM cores all have a solid center post and standard height, low profile and alternate materials are available upon request. Figure 2 Figure 1 • RM cores can be supplied with the center post gapped to a mechanical dimension or an AL value. • AL value is measured at 1 kHz, B < 10 gauss. • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number (1) 6278110121 6298110121 6295110121 6278140121 6298140121 6295140121 6278180121 6298180121 6295180121 6278230121 6298230121 6295230121 6278280121 6298280121 6295280121 6278370121 6298370121 6295370121 6278420121 6298420121 6295420121 (2) (3) (4) (5) (6) (7) Fig. Generic Size A B C D E F G Phone: Wt. (g) per Set 1 RM4 10.75 ± 0.25 5.25 ± 0.1 0.423 0.207 4.50 ± 0.1 0.177 3.65 ± 0.15 0.144 8.15 ± 0.2 0.321 3.80 ± 0.1 0.150 5.80 min 9.60 ± 0.2 0.228 min 0.378 1.70 1 RM5 14.30 ± 0.3 0.563 5.20 ± 0.1 0.205 6.60 ± 0.2 0.260 3.25 ± 0.15 10.40 ± 0.2 0.128 0.409 4.80 ± 0.1 0.189 6.00 min 0.236 min 3.20 2 RM6 17.60 ± 0.3 0.693 6.20 ± 0.1 0.244 7.90 ± 0.3 0.311 4.25 ± 0.15 12.65 ± 0.25 6.25 ± 0.15 0.167 0.498 0.246 1 RM8 22.75 ± 0.45 8.20 ± 0.1 0.896 0.323 1 RM10 27.80 ± 0.6 9.30 ± 0.15 13.25 ± 0.25 6.40 ± 0.2 21.65 ± 0.45 10.65 ± 0.2 1.094 0.366 0.522 0.252 0.852 0.419 12.50 min 0.492 min 1 RM12 36.75 ± 0.75 12.25 ± 0.15 15.85 ± 0.25 8.55 ± 0.2 25.45 ± 0.55 12.60 ± 0.2 1.447 0.482 0.624 0.337 1.002 0.496 13.40 min 29.20 ± 0.6 46.00 0.528 min 1.150 1 RM14 41.60 ± 0.6 15.05 ± 0.1 18.70 ± 0.3 10.55 ± 0.2 29.50 ± 0.5 14.75 ± 0.25 17.00 min 1.638 0.593 0.736 0.415 1.161 0.581 0.669 min 10.80 ± 0.2 5.50 ± 0.15 17.30 ± 0.3 0.425 0.217 0.681 8.40 ± 0.15 0.331 (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E 12.05 ± 0.25 0.474 8.40 min 14.40 ± 0.3 0.331 min 0.567 5.50 9.80 min 19.10 ± 0.4 13.00 0.386 min 0.752 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 116 J Web: www.fair-rite.com -mail: [email protected] 24.15 ± 0.55 0.951 34.15 ± 0.65 1.344 22.00 69.00 Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 6278110121 6298110121 6295110121 6278140121 6298140121 6295140121 6278180121 6298180121 6295180121 6278230121 6298230121 6295230121 6278280121 6298280121 6295280121 6278370121 6298370121 6295370121 6278420121 6298420121 6295420121 17.60 2.38 0.134 0.319 0.113 900 ±25% 1020 ±25% 1130 ±25% 10.30 2.39 0.233 0.555 0.181 1650 ±25% 1770 ±25% 2100 ±25% 9.30 3.10 0.342 1.06 0.312 2000 ±25% 2470 ±25% 2600 ±25% 6.70 4.03 0.60 2.419 0.554 3000 ±25% 3100 ±25% 3500 ±25% 5.30 4.79 0.898 4.306 0.884 4200 ±25% 4300 ±25% 4900 ±25% 4.30 6.13 1.41 8.675 1.247 5400 ±25% 5500 ±25% 6360 ±25% 3.80 7.38 1.95 14.37 1.709 6200 ±25% 6200 ±25% 7500 ±25% (2) (3) (4) (5) (6) (7) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 117 PQ20/16, PQ20/20, PQ26/20, PQ26/25, PQ32/20, PQ32/30, PQ35/35, PQ40/40, PQ50/50 PQ cores were developed for use in power applications. The large surface area to volume of the core aids in heat dissipation. PQ cores are employed both in filter and transformer designs for switch mode power supplies. • PQ cores can be supplied with the centerpost gapped to a mechanical dimension or an ALvalue. • AL value is measured at 1 kHz, B < 10 gauss. • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number Generic Size A B C D E F G Wt. (g) per Set (1) 6678211621 6698211621 6695211621 6678212021 6698212021 6695212021 6678272021 6698272021 6695272021 6678272521 6698272521 6695272521 6678322121 6698322121 6695322121 6678323121 6698323121 6695323121 6678353621 6698353621 6695353621 6678404121 6698404121 6695404121 6678505021 6698505021 6695505021 PQ20/16 20.50 ± 0.4 0.807 8.00 ± 0.15 0.315 14.00 ± 0.4 0.551 5.00 ± 0.15 0.197 18.00 ± 0.4 0.709 8.80 ± 0.2 0.346 12.00 min 0.472 min 13.00 PQ20/20 20.50 ± 0.4 0.807 10.20 ± 0.15 0.402 14.00 ± 0.4 0.551 7.00 ± 0.15 0.276 18.00 ± 0.4 0.709 8.80 ± 0.2 0.346 12.00 min 0.472 min 16.00 PQ26/20 26.50 ± 0.5 1.043 10.10 ± 0.15 0.398 19.00 ± 0.4 0.748 5.75 ± 0.15 0.226 22.50 ± 0.4 0.886 12.00 ± 0.3 0.472 15.50 min 0.610 min 30.00 PQ26/25 26.50 ± 0.5 1.043 12.50 ± 0.15 0.492 19.00 ± 0.4 0.748 8.05 ± 0.15 0.317 22.50 ± 0.4 0.886 12.00 ± 0.3 0.472 15.50 min 0.610 min 36.00 PQ32/20 32.00 ± 0.6 1.260 10.25 ± 0.15 0.404 22.00 ± 0.4 0.866 5.75 ± 0.15 0.226 27.50 ± 0.5 1.083 13.45 ± 0.3 0.530 19.00 min 0.748 min 43.00 PQ32/30 32.00 ± 0.6 1.260 15.15 ± 0.15 0.596 22.00 ± 0.4 0.866 10.65 ± 0.15 0.419 27.50 ± 0.5 1.083 13.45 ± 0.3 0.530 19.00 min 0.748 min 57.00 PQ35/35 35.10 ± 0.6 1.382 17.40 ± 0.2 0.685 26.00 ± 0.5 1.024 12.50 ± 0.2 0.492 32.00 ± 0.5 1.260 14.35 ± 0.25 0.565 23.50 min 0.925 min 73.00 PQ40/40 40.50 ± 0.9 1.594 19.88 ± 0.13 0.783 27.93 ± 0.53 1.100 14.75 ± 0.15 0.581 36.40 min 1.433 min 14.70 ± 0.30 0.579 27.20 min 1.071 min 97.00 PQ50/50 50.00 ± 0.8 1.969 25.00 ± 0.15 0.984 32.00 ± 0.6 1.260 18.10 ± 0.25 0.713 44.00 ± 0.7 1.732 20.00 ± 0.4 0.787 32.00 min 1.260 min 195.00 (2) (3) (4) (5) (6) (7) (8) (9) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 118 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 6678211621 6698211621 6695211621 6678212021 6698212021 6695212021 6678272021 6698272021 6695272021 6678272521 6698272521 6695272521 6678322121 6698322121 6695322121 6678323121 6698323121 6695323121 6678353621 6698353621 6695353621 6678404121 6698404121 6695404121 6678505021 6698505021 6695505021 6.00 3.69 0.615 2.27 0.601 3430 ±25% 3430 ±25% 3880 ±25% 7.20 4.52 0.625 2.526 0.608 2920 ±25% 2920 ±25% 3500 ±25% 3.72 4.48 1.203 5.385 1.131 5510 ±25% 5510 ±25% 6500 ±25% 4.59 5.40 1.177 6.359 1.131 4670 ±25% 4670 ±25% 6000 ±25% 3.27 5.373 1.642 8.821 1.404 6000 ±25% 6000 ±25% 7900 ±25% 4.59 7.53 1.642 12.37 1.401 4500 ±25% 4500 ±25% 6500 ±25% 4.82 8.82 1.83 16.13 1.617 4900 ±25% 5100 ±25% 6200 ±25% 5.23 10.36 1.98 20.50 1.70 4300 ±25% 4300 ±25% 5850 ±25% 3.59 11.47 3.19 36.63 3.142 6720 ±25% 6720 ±25% 8000 ±25% (2) (3) (4) (5) (6) (7) (8) (9) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 119 EF12.6, EF16, E 187, EF20, EF25, EF32, E33/13, E 375, E42/15, E42/20, E55/21, E65/27 The E core geometry offers an economical design approach for inductive applications in a variety of power designs. • E cores can be supplied with the center post gapped to a mechanical dimension or an ALvalue. • AL value is measured at 1 kHz, B < 10 gauss. • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number Generic Size A B C D E F Wt. (g) per Set (1) 9478102002 9498102002 9478101002 9498101002 9478103002 9498103002 9495103002 9478104002 9498104002 9478105002 9498105002 9478110002 9498110002 9495110002 9478111002 9498111002 9495111002 9478112002 9498112002 9495112002 9478114002 9498114002 9478115002 9498115002 9478116002 9498116002 9478117002 9498117002 EF12.6 12.70 ±0.35 0.500 6.35 ±0.15 0.250 3.60 ±0.2 0.142 4.65 ±0.15 0.183 8.80 min 0.346 min 3.60 ±0.2 0.142 1.80 EF16 16.10 ±0.6 0.634 8.05 ±0.2 0.317 4.50 ±0.2 0.177 5.90 ±0.2 0.232 11.30 min 0.445 min 4.55 ±0.15 0.179 4.00 E19/5 19.00 ±0.4 0.748 8.00 ±0.3 0.315 4.80 ±0.3 0.189 5.75 ±0.25 0.226 13.80 min 0.543 min 4.50 ±0.3 0.177 4.60 EF20 20.00 ±0.6 0.787 9.90 ±0.2 0.390 5.65 ±0.25 0.222 7.20 ±0.2 0.283 14.10 min 0.555 min 5.70 ±0.2 0.224 7.40 EF25 25.05 ±0.65 0.986 12.55 ±0.25 0.494 7.20 ±0.3 0.283 8.95 ±0.25 0.352 17.50 min 0.689 min 7.25 ±0.25 0.285 16.00 EF32 32.10 ±0.6 1.264 16.10 ±0.3 0.634 9.15 ±0.35 0.360 11.50 ±0.3 0.453 22.70 min 0.894 min 9.20 ±0.3 0.362 32.00 E33/13 33.00 ±0.6 1.299 14.00 ±0.3 0.551 12.70 ±0.3 0.500 9.60 ±0.3 0.378 22.80 min 0.898 min 9.70 ±0.3 0.382 40.20 E35/9 34.50 ±1 1.358 14.35 ±0.35 0.565 9.50 ±0.4 0.374 9.70 ±0.3 0.382 25.40 min 1.000 min 9.40 ±0.3 0.370 29.90 E42/15 42.00 ±0.7 1.654 21.20 ±0.3 0.835 14.90 ±0.3 0.587 15.15 ±0.3 0.596 29.50 min 1.161 min 11.90 ±0.3 0.469 88.00 E42/20 42.00 ±0.7 1.654 21.20 ±0.3 0.835 19.85 ±0.35 0.781 15.15 ±0.3 0.596 29.50 min 1.161 min 11.90 ±0.3 0.469 112.00 E55/21 55.15 ±1.05 2.171 27.50 ±0.3 1.083 20.60 ±0.4 0.811 18.80 ±0.3 0.740 37.50 min 1.476 min 16.95 ±0.25 0.667 216.00 E65/27 65.20 ±1.3 2.567 32.50 ±0.3 1.280 26.90 ±0.5 1.059 22.55 ±0.35 0.888 44.20 min 1.740 min 19.65 ±0.35 0.774 410.00 (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 120 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 9478102002 9498102002 9478101002 9498101002 9478103002 9498103002 9495103002 9478104002 9498104002 9478105002 9498105002 9478110002 9498110002 9495110002 9478111002 9498111002 9495111002 9478112002 9498112002 9495112002 9478114002 9498114002 9478115002 9498115002 9478116002 9498116002 9478117002 9498117002 23.40 2.96 0.127 0.376 0.122 800 ±25% 800 ±25% 19.30 3.77 0.196 0.739 0.189 950 ±25% 1000 ±25% 18.10 3.99 0.22 0.878 0.216 1150 ±25% 1200 ±25% 1400 ±25% 15.00 4.63 0.309 1.43 0.30 1400 ±25% 1450 ±25% 11.40 5.79 0.509 2.95 0.49 1800 ±25% 1900 ±25% 9.07 7.45 0.821 6.11 0.79 2600 ±25% 2800 ±25% 3350 ±25% 5.60 6.65 1.19 7.90 1.12 4000 ±25% 4200 ±25% 5000 ±25% 8.10 6.97 0.86 5.99 0.79 2800 ±25% 2900 ±25% 3500 ±25% 5.53 9.79 1.77 17.30 1.74 4300 ±25% 4600 ±25% 4.17 9.79 2.35 23.10 2.31 5200 ±25% 5200 ±25% 3.50 12.40 3.49 43.10 3.42 6500 ±25% 6500 ±25% 2.80 14.70 5.31 78.10 5.29 7600 ±25% 7900 ±25% (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 121 EFD10, EFD12, EFD15, EFD20, EFD25, EFD30 EFD (Economical Flat Design) cores have been designed to maximize volume in a low profile geometry. EFD cores allow maximum throughput power density with reasonably low mass for board level installation. • EFD cores can be supplied with the center post gapped to a mechanical dimension or an ALvalue. • AL value is measured at 1 kHz, B < 10 gauss. • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number Generic Size A B C D E F K Wt. (g) per Set (1) 8978101021 8998101021 8995101021 8978121221 8998121221 8995121221 8978151521 8998151521 8995151521 8978202021 8998202021 8995202021 8978252521 8998252521 8995252521 8978303021 8998303021 8995303021 EFD10 10.50 ± 0.3 0.413 5.20 ± 0.15 0.205 2.70 ± 0.2 0.106 3.75 ± 0.15 0.148 7.65 ± 0.3 0.301 4.55 ± 0.2 0.179 1.45 ± 0.1 0.057 0.90 EFD12 12.50 ± 0.35 0.492 6.20 ± 0.15 0.244 3.50 ± 0.2 0.138 4.55 ± 0.15 0.179 9.00 ± 0.35 0.354 5.40 ± 0.2 0.213 2.00 ± 0.1 0.079 1.80 EFD15 15.00 ± 0.4 0.591 7.50 ± 0.15 0.295 4.65 ± 0.2 0.183 5.50 ± 0.15 0.217 11.00 ± 0.4 0.433 5.30 ± 0.2 0.209 2.40 ± 0.1 0.094 2.80 EFD20 20.00 ± 0.55 0.787 10.00 ± 0.25 0.394 6.65 ± 0.2 0.262 7.70 ± 0.25 0.303 15.40 ± 0.5 0.606 8.90 ± 0.3 0.350 3.60 ± 0.15 0.142 7.00 EFD25 25.00 ± 0.5 0.984 12.50 ± 0.25 0.492 9.10 ± 0.3 0.358 9.30 ± 0.25 0.366 18.70 ± 0.6 0.736 11.40 ± 0.2 0.449 5.20 ± 0.2 0.205 16.00 EFD30 30.00 ± 0.8 1.181 15.00 ± 0.25 0.591 9.10 ± 0.3 0.358 11.20 ± 0.3 0.441 22.40 ± 0.75 0.882 14.60 ± 0.3 0.575 4.90 ± 0.2 0.193 24.00 (2) (3) (4) (5) (6) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 122 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 8978101021 8998101021 8995101021 8978121221 8998121221 8995121221 8978151521 8998151521 8995151521 8978202021 8998202021 8995202021 8978252521 8998252521 8995252521 8978303021 8998303021 8995303021 32.70 2.36 0.072 0.171 0.066 530 ±25% 540 ±25% 610 ±25% 25.90 2.84 0.11 0.311 0.108 710 ±25% 730 ±25% 850 ±25% 22.30 3.44 0.154 0.531 0.127 880 ±25% 910 ±25% 1050 ±25% 15.60 4.74 0.31 1.44 0.29 1200 ±25% 1200 ±25% 1400 ±25% 10.40 5.88 0.58 3.32 0.55 2200 ±25% 2250 ±25% 2650 ±25% 11.30 6.93 0.69 4.26 0.66 2800 ±25% 2150 ±25% 2800 ±25% (2) (3) (4) (5) (6) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 123 ETD29, ETD34, ETD39, ETD44, ETD49, ETD54, ETD59 ETD cores have been designed to make optimum use of a given volume of ferrite material for maximum throughput power, specifically for forward converter transformers. The structure, which includes a round center post, approaches a nearly uniform cross-sectional area throughout the core and provides a winding area that minimizes winding losses. ETD cores are used mainly in switched-mode power supplies and permit off-line designs where IEC and VDE isolation requirements must be met. • ETD cores can be supplied with the center post gapped to a mechanical dimension or an ALvalue. • AL value is measured at 1 kHz, B < 10 gauss • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number Generic Size A B C D E F Wt. (g) per Set (1) 9578293202 9598293202 9595293202 9578343502 9598343502 9595343502 9578394002 9598394002 9595394002 9578444502 9598444502 9595444502 9578494902 9598494902 9595494902 9578545402 9598545402 9595545402 9578606002 9598606002 9595606002 ETD29 29.80 ± 0.6 1.173 15.80 ± 0.2 0.622 9.50 ± 0.3 0.374 11.00 ± 0.2 0.433 22.00 min 0.866 min 9.50 ± 0.3 0.374 28.00 ETD34 34.20 ± 0.65 1.346 17.30 ± 0.2 0.681 10.80 ± 0.3 0.425 12.10 ± 0.2 0.476 25.60 min 1.008 min 10.80 ± 0.3 0.425 40.00 ETD39 39.10 ± 0.7 1.539 19.80 ± 0.2 0.780 12.70 ± 0.35 0.500 14.60 ± 0.2 0.575 29.30 min 1.154 min 12.70 ± 0.35 0.500 60.00 ETD44 44.00 ± 0.75 1.732 22.30 ± 0.2 0.878 14.80 ± 0.35 0.583 16.50 ± 0.2 0.650 32.50 min 1.280 min 14.80 ± 0.35 0.583 94.00 ETD49 49.00 ± 0.8 1.929 24.70 ± 0.2 0.972 16.30 ± 0.4 0.642 18.10 ± 0.2 0.713 36.10 min 1.421 min 16.30 ± 0.4 0.642 124.00 ETD54 54.20 ± 1 2.134 27.10 ± 0.3 1.067 18.90 ± 0.4 0.744 19.50 ± 0.3 0.768 40.50 min 1.594 min 18.90 ± 0.3 0.744 180.00 ETD59 (EER60) 59.80 ± 1 2.354 30.00 ± 0.25 1.181 21.70 ± 0.4 0.854 22.55 ± 0.25 0.888 43.60 min 1.717 min 21.70 ± 0.4 0.854 274.00 (2) (3) (4) (5) (6) (7) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 124 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 9578293202 9598293202 9595293202 9578343502 9598343502 9595343502 9578394002 9598394002 9595394002 9578444502 9598444502 9595444502 9578494902 9598494902 9595494902 9578545402 9598545402 9595545402 9578606002 9598606002 9595606002 9.50 7.07 0.767 5.418 0.709 2200 ±25% 2200 ±25% 2900 ±25% 8.20 7.90 0.972 7.68 0.916 2500 ±25% 2600 ±25% 3570 ±25% 7.20 9.24 1.28 11.85 1.267 3000 ±25% 3000 ±25% 3600 ±25% 6.00 10.35 1.73 17.94 1.717 3600 ±25% 3800 ±25% 5100 ±25% 5.30 11.44 2.135 24.42 2.09 4000 ±25% 4000 ±25% 5700 ±25% 4.70 12.56 2.65 33.30 2.40 5300 ±25% 5400 ±25% 6500 ±25% 3.90 13.87 3.57 49.52 3.23 6650 ±25% 6950 ±25% 8430 ±25% (2) (3) (4) (5) (6) (7) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 125 EER25.5/18, EER28/28, EER28/34, EER35/42, EER40/46, EER42/44, EER49/54 EER cores, similar to ETD cores, have been designed to make optimum use of a given volume of ferrite material for maximum throughput power. The structure, which includes a round center post, approaches a nearly uniform crosssectional area throughout the core and provides a winding area that minimizes winding losses. • EER cores can be supplied with the center post gapped to a mechanical dimension or an ALvalue. • AL value is measured at 1 kHz, B < 10 gauss. • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number Generic Size A B C D E F Wt. (g) per Set (1) 9578261802 9598261802 9595261802 9578282802 9598282802 9595282802 9578283402 9598283402 9595283402 9578354202 9598354202 9595354202 9578404602 9598404602 9595404602 9578424402 9598424402 9595424402 9578495402 9598495402 9595495402 EER25.5 25.50 ± 0.5 1.004 9.30 ± 0.15 0.366 7.50 ± 0.25 0.295 6.40 ± 0.15 0.252 19.80 min 0.780 min 7.50 ± 0.25 0.295 11.20 EER28/28 28.50 ± 0.6 1.122 14.00 ± 0.2 0.551 11.40 ± 0.3 0.449 9.60 ± 0.2 0.378 21.20 min 0.835 min 9.90 ± 0.3 0.390 28.00 EER28/34 28.50 ± 0.6 1.122 16.90 ± 0.2 0.665 11.40 ± 0.3 0.449 12.50 ± 0.2 0.492 21.20 min 0.835 min 9.90 ± 0.3 0.390 32.00 EER35/42 35.00 ± 0.65 1.378 21.00 ± 0.2 0.827 11.30 ± 0.3 0.445 15.00 ± 0.2 0.591 25.30 min 0.996 min 11.30 ± 0.3 0.445 46.00 EER40/46 40.00 ± 0.7 1.575 22.90 ± 0.3 0.902 13.30 ± 0.3 0.524 15.90 ± 0.3 0.626 29.50 min 1.161 min 13.30 ± 0.3 0.524 80.00 EER42/44 42.00 ± 0.7 1.654 22.00 ± 0.2 0.866 15.20 ± 0.35 0.598 15.40 ± 0.2 0.606 30.50 min 1.201 min 15.20 ± 0.35 0.598 96.00 EER49/54 49.00 ± 0.8 1.929 27.00 ± 0.2 1.063 17.20 ± 0.35 0.677 18.70 ± 0.2 0.736 36.50 min 1.437 min 17.20 ± 0.35 0.677 158.00 (2) (3) (4) (5) (6) (7) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 126 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 9578261802 9598261802 9595261802 9578282802 9598282802 9595282802 9578283402 9598283402 9595283402 9578354202 9598354202 9595354202 9578404602 9598404602 9595404602 9578424402 9598424402 9595424402 9578495402 9598495402 9595495402 11.10 4.80 0.434 2.083 0.425 1800 ±25% 1800 ±25% 2200 ±25% 7.30 6.29 0.859 5.398 0.77 2800 ±25% 2800 ±25% 3500 ±25% 8.70 7.44 0.852 6.337 0.77 2600 ±25% 2710 ±25% 3350 ±25% 8.20 9.11 1.11 10.14 1.00 2600 ±25% 2800 ±25% 3200 ±25% 6.90 10.00 1.44 14.42 1.30 3400 ±25% 3600 ±25% 4200 ±25% 5.20 9.79 1.87 18.26 1.81 4000 ±25% 4100 ±25% 5900 ±25% 4.80 11.80 2.45 29.02 2.32 4200 ±25% 5350 ±25% 6500 ±25% (2) (3) (4) (5) (6) (7) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 127 The U core offers an economical core design with a nearly uniform cross-sectional area. In a power ferrite material they are frequently used in output chokes, power input filters and transformers for switched-mode power supplies and HF fluorescent ballasts. • These U cores have the same minimum cross-sectional area as the listed effective cross-sectional area. • AL value is measured at 1kHz, < 10 gauss. • For any U core requirement not listed in the catalog, please contact our customer service group for availability and pricing. • Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade. • Weight indicated is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. MnZn 77 material Row # Part Number Fig. A B C D E F Wt. (g) per Set (1) 9077002002 1 1 1 _ 17.50 (4) 9077024002 1 _ 20.00 (5) 9277023002 2 _ 28.00 (6) 9277002002 2 _ 32.00 (7) 9277024002 3 9277008002 3 (9) 9277010002 3 (10) 9277012002 3 26.60 ±0.5 1.047 35.30 ±0.60 1.390 35.30 ±0.60 1.390 35.30 ±0.60 1.390 35.00 (8) 2.30 Min 0.090 Min 12.45 Min 0.490 Min 12.45 Min 0.490 Min 12.45 Min 0.490 Min 7.25 Min 0.285 Min 7.25 Min 0.285 Min 12.50 Min 0.492 Min 18.65 Min 0.735 Min 18.65 Min 0.735 Min 18.65 Min 0.735 Min 15.00 9077025002 1.30 Min 0.051 Min 6.20 Min 0.244 Min 9.40 Min 0.370 Min 12.55 Min 0.494 Min 10.00 Min 0.394 Min 14.35 Min 0.565 Min 9.40 Min 0.370 Min 7.80 Min 0.307 Min 10.95 Min 0.430 Min 15.75 Min 0.620 Min _ (3) 4.05 ±0.20 0.160 6.60 -0.50 0.250 6.60 -0.50 0.250 6.60 -0.50 0.250 10.00 -0.50 0.385 10.00 -0.50 0.385 10.25 -0.50 0.394 11.70 ±0.25 0.460 11.70 ±0.25 0.460 11.70 ±0.25 0.460 1.40 9077026002 4.45 +0.25 0.180 12.60 +0.25 0.500 15.75 +0.25 0.625 18.90 +0.25 0.750 15.75 +0.25 0.625 20.20 ±0.15 0.795 18.50 ±0.15 0.729 17.45 ±0.15 0.687 20.50 +0.25 0.812 25.40 ±0.15 1.000 _ (2) 8.90 -0.50 0.340 25.40 ±0.75 1.000 25.40 ±0.75 1.000 25.40 ±0.75 1.000 26.50 ±0.70 1.045 26.50 ±0.70 1.045 31.40 ±0.60 1.237 41.15 ±0.75 1.620 41.15 ±0.75 1.620 41.15 ±0.75 1.620 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 128 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 50.00 54.00 66.00 Table Continued ... Row # Part Number ∑l/A(cm-1) l (cm) Ae(cm2) Ve(cm3) AL(nH) (1) 9077002002 9077026002 9077025002 9077024002 9277023002 9277002002 9277024002 9277008002 9277010002 9277012002 16.80 2.08 0.124 0.257 695 Min 17.60 7.10 0.40 2.85 940 Min 20.70 8.40 0.40 3.36 790 Min 23.90 9.60 0.40 3.88 695 Min 11.60 7.80 0.67 5.20 1390 Min 13.90 9.50 0.68 6.50 1180 Min 11.20 9.30 0.83 7.70 1425 Min 10.50 10.30 0.98 10.10 1575 Min 11.80 11.60 0.98 11.30 1425 Min 13.80 13.50 0.98 13.20 1255 Min (2) (3) (4) (5) (6) (7) (8) (9) (10) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 129 EP7, EP10, EP13, EP17, EP20 EP designs reduce the effect of residual air gap upon the effective permeability of the core, hence they minimize coil volume for a given inductance. EP cores also provide a high degree of isolation from adjacent components and are advantageously used in low power devices, matching and broadband transformers. • EP cores can be supplied with the center post gapped to a mechanical dimension or an ALvalue. • AL value is measured at 1 kHz, B < 10 gauss • Weigh indicates is per pair or set. Legend: Symbols & Definition Explanation of part numbers: Digits 1 & 2 = product class, 3 & 4 = material grade. Dimensions Row # Part Number Generic Size A B C D E F K Wt. (g) per Set (1) 6578070121 6598070121 6595070121 6578100121 6598100121 6595100121 6578130121 6598130121 6595130121 6578170121 6598170121 6595170121 6578200121 6598200121 6595200121 EP7 9.20 ± 0.2 0.362 3.70 ± 0.2 0.146 6.40 ± 0.2 0.252 2.70 ± 0.2 0.106 7.20 min 0.283 min 3.30 ± 0.1 0.130 1.80 min 0.071 min 0.70 EP10 11.50 ± 0.3 0.453 5.10 ± 0.2 0.201 7.70 ± 0.2 0.303 3.80 ± 0.2 0.150 9.40 ± 0.2 0.370 3.30 ± 0.2 0.130 1.95 min 0.077 min 1.40 EP13 12.50 ± 0.3 0.492 6.50 ± 0.3 0.256 8.80 ± 0.2 0.346 4.70 ± 0.2 0.185 10.00 ± 0.3 0.394 4.40 ± 0.2 0.173 2.50 min 0.098 min 2.35 EP17 18.10 ± 0.4 0.713 8.40 ± 0.4 0.331 11.00 ± 0.3 0.433 5.70 ± 0.2 0.224 12.00 ± 0.4 0.472 5.70 ± 0.2 0.224 3.45 min 0.136 min 6.00 EP20 24.00 ± 0.5 0.945 10.70 ± 0.2 0.421 15.00 ± 0.4 0.591 7.20 ± 0.2 0.283 16.50 ± 0.4 0.650 8.80 ± 0.2 0.346 4.70 min 0.185 min 13.50 (2) (3) (4) (5) Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 130 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Magnetic Core Parameters Table Continued ... Row # Part Number ∑l /A(cm-1) l (cm) Ae(cm2) Ve(cm3) A min(cm2) AL(nH) (1) 6578070121 6598070121 6595070121 6578100121 6598100121 6595100121 6578130121 6598130121 6595130121 6578170121 6598170121 6595170121 6578200121 6598200121 6595200121 14.40 1.48 0.103 0.152 0.085 990 ±25% 1020 ±25% 1180 ±25% 16.80 1.85 0.11 0.203 0.085 1000 ±25% 1050 ±25% 1200 ±25% 11.80 2.32 0.197 0.457 0.148 1600 ±25% 1650 ±25% 1800 ±25% 8.00 2.68 0.336 0.899 0.252 2250 ±25% 2300 ±25% 2750 ±25% 4.80 3.76 0.789 2.96 0.60 4100 ±25% 4250 ±25% 5000 ±25% (2) (3) (4) (5) e Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 131 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 132 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 133 3.5 - 4.5 mW/cm - oC Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 134 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Air Core Inductance - Lo (henry) The inductance that would be measured if the core had unity permeability and the flux distribution remained unaltered. Coercive Force - Hc (oersted or A/m) The magnetizing field strength required to bring the magnetic flux density of the magnetized material to zero. -1 Core Constant - C1 (cm ) The summation of t he magnetic path lengths of each section of a magnetic circuit divided by the corresponding magnetic area of the same section. -3 Core Constant - C2 (cm ) The summation of t he magnetic path lengths of each section of a magnetic circuit divided by the square of the corresponding magnetic area of the same section. o Curie Temperature - Tc ( C) The transition temperature above which a ferrite loses its ferrimagnetic properties. Disaccommodation – D The proportional decrease of p ermeability after a disturbance of magnetic material, measured at constant temperature, over a given time interval. Disaccommodation Factor – DF The disaccommodation factor if the disaccommodation after magnetic conditioning divided by the permeability of the first measurement times log10 of the ratio of time intervals. Effective Dimensions of a Magnetic Circuit – Area Ae (cm2), Path Length le (cm) and Volume Ve (cm3) For a magnetic core of given geometry, the magnetic path length, the cross-sectional area and the volume that a hypothetical toroidal core of the same material properties should posses to be the magnetic equivalent to the given core. Field Strength - H (oersted or A/m) The parameter characterizing the amplitude of the alternating field strength. Flux Density - B (gauss or mT) The corresponding parameter for the induced magnetic field in an area perpendicular to the flux path. Flux Density, saturation – Bs (gauss or mT) The maximum intrinsic induction possible in a material. Inductance Factor - AL(nH) Inductance of a coil on a specified core divided by the square of the number of t urns. (Unless otherwise specified the inductance test conditions for the inductance factor are at flux density <10gauss). Magnetic Constant - μo The permeability of free space. Magnetic Hysteresis In the magnetic material, the irreversible variation of the flux density or the magnetization which is associated with the change of magnetic field strength and is independent of the rate change. Magnetically Soft Material A magnetic material with low coercivity. Permeability, amplitude - μa The quotient of the peak value of the flux density and the peak value of the applied field strength at a stated amplitude of either, with no static present. Permeability, complex series - μs', μs" The real and imaginary components respectively of the complex permeability expressed in series terms. Permeability, effective - μe For a magnetic circuit constructed with an ai r gap or air gaps , the permeability of a hypothetical homogeneous material which would provide the same reluctance. Permeability, incremental - μΔ Under stated conditions the permeability obtained from the ratio of the flux density and the applied field strength of an alternating field and a superimposed static field. Permeability, initial - μi The permeability obtained from the ratio of the flux density, kept at <10 gauss, and the required appl ied field strength. Material initially in a specified neutralized state. 3 Power Loss Density - P (mW/cm ) The power absorbed by a body of ferrimagnetic material and dissipated as heat, when the body is subject to an alternating field which results in a measurable temperature rise. The total loss is divided by the volume of the body. Remanence - Br (gauss or mT) The flux density remaining in a magnetic material when the applied magnetic field strength is reduced to zero. Temperature Coefficient - TC The relative change of the quantity considered, divided by the difference in the temperatures producing it. Temperature Factor - TF The fractional change in the initial permeability over temperature range, divided by the initial permeability. Loss Factor - tan δ /μi The phase of displacement between the fundamental components of the flux density and the field strength divided by the initial permeability. . Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 135 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 136 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 137 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 138 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 139 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 140 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 141 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 142 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 143 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 144 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 145 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 146 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 147 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 148 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 149 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 150 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 151 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 152 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 153 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 154 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 155 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 156 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] 157 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 158 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 • (888) 324-7748 (888) 337-7483 E Web: www.fair-rite.com -mail: [email protected] Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] 159 Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 160 Phone: (888) FAIR RITE / (845) 895-2055 • Fax: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337-7483 • Web: www.fair-rite.com E-mail: [email protected] Fai r Ri t ePr oduct sCor p.of f er sacompr ehensi vel i neoff er r i t e component si nawi der angeofmat er i al sandgeomet r i esf orEMI Suppr essi on,PowerAppl i cat i ons,andRFI DAnt ennas. Fai r Ri t ei st hef i r stUSsof tf er r i t emanuf act ur ert or ecei veI SO/ TS 16949cer t i f i cat i on.Wepl acet hehi ghestval ueonqual i t y , engi neer i ng,andser vi ceandar ededi cat edt ocont i nuali mpr ovement . I naddi t i ont oourst andar dpr oductof f er i ng,Fai r Ri t ecanpr ovi de cust om desi gnsandshapest omeetyourspeci f i cr equi r ement s.Wehave anexper i encedt eam ofengi neer st oassi styouwi t hnew desi gnand t echni calsuppor t . Pl easevi si tourwebsi t eatwww. f ai r r i t e. com.Youcanbr owseour onl i necat al ogbypr oductcat egor yorsear chbypar tnumber .Youwi l l al sof i ndcont acti nf or mat i onf orcust omerser vi ce,appl i cat i onsengi neer s, l ocalsal esr epr esent at i ves,andl ocaldi st r i but or s.Anavi gat i ont ut or i al i savai l abl et ohel pgui deyout hr oughourwebsi t e. Fai r Ri t ePr oduct sCor p. P. O.Box288,OneCommer c i al Row,Wal l k i l l ,NY125890288 Web:www. f ai r r i t e. com 06/ 2013