INDUCTIVE COMPONENTS Bourns Manufacturers Representatives Corporate Distributor Product Managers Americas Sales Team Asia Sales Team Europe Sales Team Bourns Internal Bourns Plant Managers June, 2008 Bourns® / JW Miller® Model PM1210 No Longer Available in Values from 0.10 µH through 0.82 µH Effective immediately, Bourns®/JW Miller® Model PM1210 is no longer available in values from 0.10 µH through 0.82 µH. Core manufacturers have advised us that they are no longer able to supply the special core required to manufacture this inductor at these low values at the ±5 % tolerance. Bourns® Model CM322522 is available in values from 0.10 µH through 0.82 µH. The values of the CM322522 have a tolerance of ±20 % versus the PM1210’s tolerance of ±5 % at these values. Current ratings for the CM322522 series are slightly lower than those of the PM1210 series. The CM322522 series is the nearest equivalent we can offer. Data sheets for both series are available on Bourns website at www.bourns.com. Part Number PM1210-R10J-RC PM1210-R12J-RC PM1210-R15J-RC PM1210-R18J-RC PM1210-R22J-RC PM1210-R27J-RC PM1210-R33J-RC PM1210-R39J-RC PM1210-R47J-RC PM1210-R56J-RC PM1210-R68J-RC PM1210-R82J-RC Current Rating (mA) 450 450 450 450 450 450 450 450 450 450 450 450 Nearest Equivalent CM322522-R10ML CM322522-R12ML CM322522-R15ML CM322522-R18ML CM322522-R22ML CM322522-R27ML CM322522-R33ML CM322522-R39ML CM322522-R47ML CM322522-R56ML CM322522-R68ML CM322522-R82ML Current Rating (mA) 360 240 230 220 360 345 330 305 290 275 260 245 IC0834