Brochure for H1300 Series High Current Fixed Inductors for Inverter Systems

HIGH CURRENT INDUCTORS
FOR INVERTER SYSTEMS
H1300 SERIES
•
Ideal for use in PV Inverters, String Inverters, Bidirectional Inverters
•
Flat wire coil minimizes losses at high frequency
•
Superior thermal management and significantly reduced size and
weight compared with conventional toroid designs
•
Operating Temperature -40ºC to +180ºC
•
Custom Design Available up to 500A current for inverter systems
20kW and up
ELECTRICAL PARAMETERS @ 25°C
Part Number
Isat
Irms
(A) TYP
(A) TYP
INDUCTANCE
(μH)
DCR
(mΩ)
SRF
(MHz)
±12%
MAX
TYP
10% Drop
20% Drop
30% Drop
20ºC Rise
40ºC Rise
H1300-260
26.0
1.5
11.5
55
83
107
67
101
H1300-400
40.0
2.3
9.0
44
65
85
53
81
H1300-780
78.0
4.2
6.2
31
47
61
39
59
H1300-940
94.0
3.1
6.5
28
43
56
35
54
H1300-151
150.0
8.7
4.4
23
34
44
27
41
H1300-161
160.0
9.0
3.5
22
32
42
26.5
40.5
H1300-241
244.0
12.0
3.0
17.5
26.5
34.5
23.5
35.5
Note:
1. Inductance measured at 100KHz, 1Vrms
2. Isat is the DC current where the inductance drops the specified amount from its original value without bias.
3. Irms is the DC current that causes the specified temperature rise of the winding from 25°C ambient for the inductor without housing or potting. Aluminum case, thermal
conductive epoxy, or thermal pads can be added to improve cooling.
Revised 04/11/2016
Product performance is limited to specified parameters. Data is subject to change without prior notice.
Tel: 310-325-1043
Fax: 310-325-1044
www.mpsind.com
[email protected]
HIGH CURRENT INDUCTORS
FOR INVERTER SYSTEMS
H1300 SERIES
DIMENSIONS (mm / [inch])
82.17
[3.23]
72.0
[2.84]
CL
21.00
[0.83]
Ø6.40 (x2)
[Ø0.25]
34.00
[1.34]
Ø4.65 (x4)
[Ø0.18]
78.0 Typ
[3.07]
93.0 Max
[3.66]
63.0 Max
[2.48]
Heat-Shrink Tubing
MPS
H1300 Series
Date Code
57.20 ± 2.54
[2.25±0.10]
Revised 04/11/2016
Product performance is limited to specified parameters. Data is subject to change without prior notice.
Tel: 310-325-1043
Fax: 310-325-1044
www.mpsind.com
[email protected]
Similar pages