Download

HDFX-200-TR
DATA SHEET
One (1) fiber Detachable HDMI Extender,
HDFX-200-TR
Contents










Description
Features
Applications
Technical Specifications
Operating Conditions
Drawing of Module
Drawing of Cable Connection
HDMI Pin Description
Reliability Test
Laser Safety Information
OPTICIS HQ
Opticis Co., Ltd.
# 907, Byucksan Technopia, 434-6,
Sangdaewon-Dong, Chungwon-Gu,
Sungnam City, Gyeonggi-Do, 462-716
South Korea
Te l: +82 (31) 737-8033~8
Fax: +82 (31) 737-8079
www.opticis.com
[email protected]
Copyright © 2012, All rights reserved by Opticis
Oct.12, 2012
HDFX-200-TR
Description
New optical HDMI extender, HDFX-200-TR consists of transmitter module and receiver module, each
of which has one (1) LC connector and is designed compact enough to be fitted into various
installation environments.
It enables to transmit the uncompressed HDMI up to WUXGA (1920x1200) at 60Hz refresh ratio or
1080p at 60Hz, avoiding any tricks like scaling or data compression for lessening a burden of data
transmission.
The Optical HDMI extender, HDFX-200-TR offers extension of digital video of HDMI 1.3a up to 300
(985feet) over one (1) LC multi-mode fiber(50㎛). It is an all-fiber extension product, no copper
connection like CAT5 or 6e between transmitter and receiver, installed in one (1) LC optical fiber for
connection.
Optical technology makes the HDMI transmission stretch the performance beyond limitation of copper
wire extension with various benefits of long distance, crystal-clear data, negligible RFI/EMI and
elimination of costly distribution amplifiers unlike in analog extension.
HDFX-200-TR has HDMI receptacle and provides intermediate cable to be connected to various
types of HDMI connectors. It passes CEC, EDID, and HDCP for better installation flexibility and is
certified FCC and CE standards for EMI/RFI emission.
The shipping items are shown as follows;
1) One (1) Transmitter (Tx) and One (1) Receiver (Rx)
2) Two (2) DC +5V 1A power adapter
3) Two (2) HDMI copper cable (30cm)
4) User’s Manual
※ Other options – contact with sales office
Copyright © 2012, All rights reserved by Opticis
Oct.12, 2012
HDFX-200-TR
Features

Extends WUXGA (1920x1200) at 60Hz (1.65Gbps/ch) or 1080p at 60Hz (36bit, 2.25Gbps/ch)

Transmits HDMI data up to 300m (985feet) over one (1) LC multi-mode fiber

Has HDMI receptacle and provides intermediate cable for flexible installation

Supports HDMI1.3 up to 36-bit color depth

Complies with CEC, EDID & HDCP1.2

Certifies FCC and CE standards for EMI/RFI emission

Compliant with Class 1 LASER Eye Safety

Includes two (2) +5V DC power adapters for the transmitter and receiver
Applications

Digital HD-TV of types of LCD, PDP, projection and projectors for Home or Commercial
Entertainments

Digital HD-TVs for industrial applications such as medical appliances, aero traffic control,
factory, conference room, auditorium and bank

Digital FPDs and projectors in conference room and auditorium

Kiosk with digital FPDs showing full motion graphic displays from remote systems

HD-TVs for information display in public sites

LED signboards in streets or in stadiums
Copyright © 2012, All rights reserved by Opticis
Oct.12, 2012
HDFX-200-TR
Technical Specifications
Parameter
Components
Electrical
Optical
Mechanical
Connect
External
Power
Specifications
Remarks
Laser diodes in Tx module
InGaAs/InP 850nm/ 1310nm
laser diode
Photo diodes in Tx module
InGaAs/InP PIN type photo diode
Photo diodes in Rx module
InGaAs/InP PIN type photo diode
Laser diodes in Rx module
InGaAs/InP 1550nm
Input and Output signals
TMDS level
Data Transfer Rate
Max.
Total Jitter at the end of Rx output
Max. 300 ps
Skew inter-channels
Max. 10ns
Link Power Budget
Min. 10.0 dB
Module dimension (WDH)
39 x 55 x 14.5mm
Optical Connector
LC/PC connector
Electrical connector type from
modules and to HDTVs
HDMI receptacle
Recommended fiber
50um Multi-mode Glass fiber
Input
100~240V, 50~60Hz
Output
5V, 1A
laser diode
1.65Gbps
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device.
These are absolute stress ratings only. Functional operation of the device is not implied at these of
any other conditions in excess of those given in the operational sections of the datasheet. Exposure
to absolute maximum ratings for extended periods can adversely affect device reliability.
Parameter
Symbol
Min
Max
Unit
Supply Adapter Voltage
VCC
-
6.5
V
Operating Temperature
TOP
-10
50
1)
Operating Relative Humidity
RHOP
5
80
Storage Temperature
Tstg
-20
75
Storage Relative Humidity
RHstg
5
95
2)
°
C
%RH
°
C
%RH
Note
1), 2) Under the conditions of No drops of dew
Copyright © 2012, All rights reserved by Opticis
Oct.12, 2012
HDFX-200-TR
Operating Conditions
 Transmitter module: HDFX-200T
Parameter
Power
Supply
Symbol
Min
Typ.
Max
Units
Supply Voltage
VCC
4.5
5.0
5.5
V
Supply current
ITCC
400
460
580
mA
Power Dissipation
PTX
1.8
2.3
3.19
W
Power Supply Rejection (Note1)
PSR
-
50
-
mVp-p
Data Output Load
RLD
Graphic Supply Voltage
TMDS
(Note2)
Ω
50
GVCC
+ 3.1
+ 3.3
+ 3.5
V
GVIH
GVCC - 0.01
GVCC
GVCC +
0.01
V
GVIL
GVCC - 0.6
-
GVCC - 0.4
V
GVISWING
0.4
-
0.6
V
Output Optical Power
Po
-9
-7
-4
dBm
Wavelength

840
850
860
nm
Output Optical Power
Po
-6
-3
-1
dBm
Wavelength

1290
1310
1330
nm
Vdiffout
600
800
1000
mV
[email protected] (Note4)
PO
-17
-20
Receiving Wavelength
Λ
1530
1550
Link Power Budget
Pb
11
17
Vdifin
300
Single-Ended High Level Input Voltage
Single-Ended Low Level Input Voltage
Single-Ended Input Swing Voltage
TX
Optical
Link
(Note3)
Differential output swing
RX
Differential input swing
dBm
1570
dB
2400
Note1. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with
the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced.
Note2. Graphic Supply Voltage is regulated reference voltage for signal processing in modules
Note3. Measure signals at the end of 2 meter 50/125um MMGOF
Note4. Use PPG (Pulse pattern Generator) source with jitter 50ps
Copyright © 2012, All rights reserved by Opticis
nm
Oct.12, 2012
mV
HDFX-200-TR
 Receiver module: HDFX-200-R
Parameter
Symbol
Min
Typ.
Max
Units
Supply Voltage
VCC
4.5
5.0
5.5
V
Supply current
ITCC
330
370
470
mA
Power Dissipation
PTX
1.49
1.85
2.59
W
-
50
-
Power Supply
Power Supply Rejection (Note5)
PSR
Data Input Load
RLD
Graphic Supply Voltage
TMDS
Ω
50
(Note6) GVCC
+ 3.1
+ 3.3
+ 3.5
V
GVISWING
0.2
-
0.4
V
Output Optical Power
Po
-6
-3
1
dBm
Wavelength

1530
1550
1570
nm
Vdiffout
600
800
1000
mV
[email protected](Note8)
PO
-16
-19
Receiving Wavelength
Λ
840
850
Signal Detector-Dessert
SDDE
-16
-19
Signal Detector-Assert
SDA
1290
1310
Differential input swing
Vdifin
300
Single-Ended Output Swing
Voltage (Note7)
TX
Differential output swing
Optical Link
RX
dBm
860
dBm
1330
dBm
2400
mV
Note5. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with
the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced.
Note6. Graphic Supply Voltage is regulated reference voltage for signal processing in modules
Note7. TMDS outputs are coupled in AC
Note8. Use PPG (Pulse pattern Generator) source with jitter 50ps
Recommended specifications of fiber-optic cable
Parameters
Conditions
Fiber Type
Modal Bandwidth
Fiber Cable Attenuation
Extension Distance
No. of Ferrules
Skew
Insertion Attenuation
Total Optical Attenuation
 = 850nm
 = 850nm
Duplex LC
In 330 ft (100 meter) extension
Copyright © 2012, All rights reserved by Opticis
nm
Specifications
50m Multi-mode Graded Index Glass
Fiber
Min. 500 MHz km
Max. 2.5dB/km
10 – 1650ft (500 meters)
2 ferrule
Max. 0.4ns
Max. 0.5dB
Max. 1.5dB
Oct.12, 2012
HDFX-200-TR
Drawing of Module
Note: The transmitter, HDFX-200-T and the receiver, HDFX-200-R have the same mechanical dimensions
Drawing of Cable Connection
HDMI Pin Description
No
Pin Assignment
Functional Description
1
TMDS2+
TMDS Data Signal Channel 2 Positive
2
TMDS2 Shield
TMDS Data Signal Channel 2 Shield
3
TMDS2-
TMDS Data Signal Channel 2 Negative
4
TMDS1+
TMDS Data Signal Channel 1 Positive
5
TMDS1 Shield
TMDS Data Signal Channel 1 Shield
Copyright © 2012, All rights reserved by Opticis
Oct.12, 2012
HDFX-200-TR
6
TMDS1-
TMDS Data Signal Channel 1 Negative
7
TMDS0+
TMDS Data Signal Channel 0 Positive
8
TMDS0 Shield
TMDS Data Signal Channel 0 Shield
9
TMDS0-
TMDS Data Signal Channel 0 Negative
10
TMDS Clock+
TMDS Clock Channel
Positive
11
TMDS Clock Shield
TMDS Clock Channel
Shield
12
TMDS1Clock-
TMDS Clock Channel Negative
13
CEC
Consumer Electronics Control
14
Reserved
Not used
15
SCL
HDCP/DDC communication clock
16
SDA
HDCP/DDC communication data
17
DDC/CEC Ground
DDC/CEC shield
18
+5V Power
5 V Input for Transmitter for Host
5 V Output for Monitor from Receiver
19
Hot Plug Detect
Signal is driven by monitor to enable the system to identify the
presence of a monitor
Reliability Test
We have two kinds of test criteria for a continuous improvement of characteristics of Optical HDMI
interface module by our failure mode analysis program
1) Temperature & Humidity test
2) EMC test

- FCC
Temp. & Humidity Test
Items
Test
Conditions
Operation
Test
Operating at each
(1)
Temperature
-10 ~ 60 C
°
(step: 10 C)
Low Temperature
Ts
Low Temperature
Ts = 75 C
(3)
RH : 85%
Storage Test
°
(2)
°
= -20 C
Duration
Sample Size
30 min.
(each
Temperature)
N=5
96HR
N=5
96HR
N=5
°
Note 1) Evaluate display quality of Full HD TV connected to Graphic signal Generator (Quantum Data: GE-802B) at each
temperature.
Note 2) Ts: Storage Temperature
Note 3) RH: Relative Humidity
Copyright © 2012, All rights reserved by Opticis
Oct.12, 2012
HDFX-200-TR

EMC Test
1)
EMI: Meet FCC class A (ICES-003) and CE class A
STANDARDS
EN 55 022 (CISPR22)
CE (Conducted Emission) &
FCC; PART 15 SUBPART B
RE (Radiated Emission)
EN 61000-3-2 (IEC 61000-3-2)
Harmonics
EN 61000-3-3 (IEC 61000-3-3)
Flickers
CONDITIONS
Meet Class A
Meet Class A
Laser Safety Information
<US FDA CDRH Class 1>
Ensure to avoid exposure of human eyes to high power laser diode emitted laser beams.
Especially do not look into the laser diode or the collimated laser beam when the diode is activated.
US FDA CDRH Class 1, IEC60950, 60825-1.
Terminology
ANSI
American National Standards Institute
AVI
Auxiliary Video Information
CEC
Consumer Electronics Control
DDC
Display Data Channel
DVD
Digital Versatile Disc
DVI
Digital Visual Interface
E-DDC Enhanced Display Data Channel
E-EDID Enhanced Extended Display Identification Data
HDCP
High-bandwidth Digital content Protection
HDMI
High-Definitions Multimedia Interface
HDTV
High-Definition Television
SMPTE Society of Motion Picture and Television Engineers
STB
Set-Top Box
TMDS
Transition Minimized Differential Signaling
VESA
Video Electronics Standards Association
Copyright © 2012, All rights reserved by Opticis
Oct.12, 2012
Similar pages