Download

CH-1106TX & RXN
HDMI over CAT5e/6 Transmitter and Receiver Set
with IR Source Control
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
VR0
29/09/11
Preliminary Release
VS1
19/04/13
Updated format/diagrams
CONTENTS
1. Introduction������������������������������������������������ 1
2. Applications����������������������������������������������� 1
3. Package Contents������������������������������������ 1
4. System Requirements�������������������������������� 1
5. Features������������������������������������������������������ 2
6. Operation Controls and Functions����������� 3
6.1 Transmitter Front and Rear Panels������ 3
6.2 Receiver Front and Rear Panels���������� 4
6.3 IR Cable Pin Assignment���������������������� 5
6.4 RJ-45 Pin Definition�������������������������������� 5
7. Connection Diagrams������������������������������� 6
7.1 Typical Connection Example�������������� 6
7.2 Input Connection Examples���������������� 7
7.3 Output Connection Examples������������ 8
8. Specifications�������������������������������������������� 9
8.1 Technical Specifications���������������������� 9
8.2 Compatible Products������������������������� 10
9. Acronyms������������������������������������������������� 10
1. INTRODUCTION
This HDMI over CAT5e/6 Transmitter and Receiver Set with IR Source
Control can extend HDMI signals over dual CAT5e/6 cabling up to
45m. It has the added benefit of allowing the control of a source
device with your existing Remote Control with the included IR Extender
and Blaster cables.
2. APPLICATIONS
• Showroom Display and Control
• Home Entertainment systems
• Commercial/Retail Installations
• Commercial Display
• University Lecture Hall display
3. PACKAGE CONTENTS
• 1×HDMI over CAT5e/6 Transmitter with IR Source Control
• 1×HDMI over CAT5e/6 Receiver with IR Source Control
• 1×IR Extender Cable
• 1×IR Blaster Cable
• 2×5 V/1 A DC Power Supply Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source device such as a DVD/Blu-ray player and HDMI equipped
display (TV or monitor), dual CAT5e/6 cables and the source device's
remote control.
1
5. FEATURES
• HDMI, HDCP 1.1 and DVI 1.0 compliant
• Supports high definition digital video and lossless, compressed
digital audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio)
• Supports dual CAT5e/6 cables for Video/Audio and data/DDC
transmission
• Equalizes and recovers incoming TMDS data before re-transmitting it
in optimum quality
• Supports CEC bypass and x.v.YCC
• Includes an IR Extender and Blaster
• Supports a wide range of IR frequencies, from 30 kHz to 50 kHz
• Supports transmission of [email protected] resolution signals up to 45
meters over dual CAT5e/6 cables
• Supports HDMI input cable length of up to 6 meters and output
cable length of 10 meters at [email protected] resolution
• Supports connection to a repeater or another transmitter and
receiver set to extend the HDMI signal
Note:
1. This system was tested with CAT-6/23AWG solid core cables, results
may vary with cables of a different specification.
2. Cable distance tested with the following devices: PS3 40G, 37"
Philips 8 bit LCD TV
3. Figures provided in this manual are for reference only, actual
performance may vary depending on the source and display
devices as well as the type of cable being used.
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
IR
Rear
POWER 5V
HDMI INPUT
Transmitter
1
DDC
2
3
4
CAT6 OUTPUT
VIDEO
5
1 IR TRANSMITTER
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be
controlled.
2 HDMI INPUT
Connect to an HDMI source such as a DVD or Blu-ray player.
3 POWER 5V
Connect the 5 V DC power supply to the unit and plug the adaptor
into an AC outlet.
4 DDC OUTPUT
Connect the DDC output of the transmitter to the DDC input of the
receiver using a CAT5e/6 cable.
5 VIDEO OUTPUT
3
Connect the video output of the transmitter to the video input of
the receiver using a CAT5e/6 cable.
6.2 Receiver Front and Rear Panels
Front
Rear
POWER 5V
VIDEO
CAT6 INPUT
1
Receiver
DDC
2
IR
HDMI OUTPUT
3
4
5
1 VIDEO INPUT
Connect the video output of the transmitter to the video input of
the receiver using a CAT5e/6 cable.
2 DDC INPUT
Connect the DDC output of the transmitter to the DDC input of the
receiver using a CAT5e/6 cable.
3 POWER 5V
Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
4 HDMI OUTPUT
Connect the HDMI output to the HDMI or DVI input (with a HDMI to
DVI adaptor) of a display such as an HDTV or HD monitor.
5 IR RECEIVER
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote control being used is within the direct line-ofsight of the IR extender.
4
6.3 IR Cable Pin Assignment
IR Blaster
1 Power 5 V
2 IR Blaster Signal
3 NC
IR Extender
1 IR Signal
2 Power 5 V
3 Ground
6.4 RJ-45 Pin Definition
5
PIN
VIDEO
DDC
1
TMDS2+
SCL
2
TMDS2-
N/A
3
TMDS1+
SDA
4
TMDS1-
Power 5V
5
TMDS0+
GND
6
TMDS0-
IR
7
TMDSC+
HPD
8
TMDSC-
CEC
7. CONNECTION DIAGRAMS
7.1 Typical Connection Example
Blu-ray Player
1.5m
60°
IR Blaster
HDMI Input
TX
Power
Supply
POWER 5V
IR
HDMI INPUT
Transmitter
DDC
CAT6 OUTPUT
VIDEO
CAT5e/6
Cables
VIDEO
DDC
Optional Dual
CAT5e/6 Repeater
(e.g. CH-108)
CAT6 INPUT
DDC
VIDEO
CAT6 OUTPUT
CAT5e/6
Cables
Power
Supply
VIDEO
POWER 5V
CAT6 INPUT
DDC
HDMI OUTPUT
IR
RX
Receiver
IR Extender
HDMI Output
60°
3m
m
7m
m
3m
HDTV
6
D
7
Transmitter
IR
DDC
CAT6 OUTPUT
HDMI INPUT
VIDEO
POWER 5V
CAT6
Output
HDMI Input
To A or B or C
CH-106TX
CH-1106TX
IR Blaster
60°
1.5m
60°
HDTV
60°
1.5m
CAT6
Output
HDMI Input
To A or B or C
CLUX-1H4CAT
CLUX-1H8CAT
IR Extender
& Blaster
E
60°
3m
m
HDTV
CLUX-22HC
IR Extender
& Blaster
F
CAT6
Output
CAT6
Input
To A or B or C
60°
1.5m
7.2 Input Connection Examples
A
3m
m
7m
m
3m
60°
HDMI Output
HDTV
IR Extender
CH-106RX
CH-1106RX
CAT6
Input
3m
7m
m
3m
60°
IR Extender
CLUX-1CAT4H/
CLUX-1CAT8H
B
HDTV
CAT6
Input
From D or E or F
3m
m
CAT6
Output
CAT6
Input
To A or B or C
HDTV
CLUX-22HC
60°
1.5m
From D or E or F
IR Extender
& Blaster
C
60°
From D or E or F
7.3 Output Connection Examples
8
8. SPECIFICATIONS
8.1 Technical Specifications
Transmitter
1×HDMI, 1×IR Blaster, 1×CAT5e/6 Output
Video, 1×CAT5e/6 Output DDC
Receiver
1×HDMI, 1×IR Extender, 1×CAT5e/6 Input
Video, 1×CAT5e/6 Input DDC
HDMI Input Cable
1080p/8-bit (6 m)
HDMI Output Cable
1080p/8-bit (10 m)
CAT5e/6 Cable
1080p/8-bit (45 m)
Power Supply
5 V/1 A (US/EU standards, CE/FCC/UL
certified)
ESD Protection
Human body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions
78.5 mm (W)×117 mm (D)×30 mm (H)/TX
78.5 mm (W)×72 mm (D)×30 mm (H)/RX
Weight
200 g/TX, 140 g/RX
Chassis Material
Aluminum
Color
Silver
Operating Temperature
0 ˚C ~ 40 ˚C / 32 ˚F ~ 104 ˚F
Storage Temperature
−20 ˚C ~ 60 ˚C / −4 ˚F ~ 140 ˚F
Relative Humidity
20 ~ 90% RH (non-condensing)
Power Consumption
2.7 W/TX, 3.2 W/RX
9
8.2 Compatible Products
The models (Daul CAT5e/6) listed below are compatible with each
other:
• CH-106TX/CH-106RX/CH-106TXN/CH-106RXN
• CH-1106TX/CH-1106RX/CH-1106RXN
• CMLUX-4H4CAT
• CLUX-1H8CAT
• CLUX-1H4CAT
• CLUX-1CAT8H
• CLUX-1CAT4H
• CLUX-22HC
• CH-108
9. ACRONYMS
ACRONYM
COMPLETE TERM
CAT5e
Category 5 Cable
CAT6
Category 6 Cable
CEC
Consumer Electronics Control
DDC
Display Data Channel
DVI
Digital Visual Interface
ESD
Electrostatic Discharge
GND
Ground
HDCP
High-bandwidth Digital content protection
HDMI
High Definition Multimedia Interface
IR
Infrared
10
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
Similar pages