CH-1107EX HDMI/CAT6 to Single CAT6 Extender Operation Manual DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice. COPYRIGHT NOTICE No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from Cypress Technology. © Copyright 2011 by Cypress Technology. All Rights Reserved. Version 1.1 August 2011 TRADEMARK ACKNOWLEDGMENTS All products or service names mentioned in this document may be trademarks of the companies with which they are associated. SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product. • Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. • Do not attach the power supply cabling to building surfaces. • Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. • Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. • To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit. REVISION HISTORY VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE VS1 25/10/11 First Release VR2 16/04/12 CAT6 Type Error VS2 24/02/14 Updated Diagrams/Text CONTENTS 1. Introduction���������������������������������������������� 1 2. Applications��������������������������������������������� 1 3. Package Contents���������������������������������� 1 4. System Requirements������������������������������ 1 5. Features���������������������������������������������������� 2 6. Operation Controls and Functions��������� 3 6.1 Front Panel������������������������������������������3 6.2 Rear Panel�������������������������������������������3 7. Connection Diagram������������������������������ 4 8. Specifications������������������������������������������ 5 8.1 Technical Specifications�������������������5 8.2 Compatible Products������������������������6 9. Acronyms������������������������������������������������� 6 1. INTRODUCTION The HDMI/CAT6 to Single CAT6 Extender is an advanced solution for HDMI and CAT6 signal distribution. It can be used to extend the distance between a compatible transmitter and receiver or used directly with an HDMI source. The CAT6 output can be easily connected to a compatible Single CAT6 to HDMI Receiver to allow a stable connection between an HDMI source and any compatible HDMI display. Alternatively, it can be cascaded to extend the signal to several hundred meters. 2. APPLICATIONS • Smart AV installation for HDMI signal extension • Switch between a local HDMI or remote CAT6 source • Household entertainment media sharing 3. PACKAGE CONTENTS • HDMI/CAT6 to Single CAT6 Extender • 5 V/1 A DC Power Supply Adaptor • Operation Manual 4. SYSTEM REQUIREMENTS HDMI source device such as a DVD/Blu-ray player or a compatible HDMI to CAT6 transmitter and an HDMI display with HDMI connection cables and industry standard CAT6 cable and a compatible CAT6 to HDMI receiver. 1 5. FEATURES • HDCP 1.1 and DVI 1.0 compliant • HDMI with Deep Color video up to 12-bit, 1080p@24/60 Hz • Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission (32 to 192 kHz Fs sampling rate) • Supports a wide range of PC and HDTV resolutions from VGA to WUXGA and 480i to 1080p • Supports HDMI cable distances of up to 15 meters at 1080p/8-bit and 12-bit resolutions • Supports CAT6 cable distances of up to 45 meters at 1080p/8-bit resolution and 10 meters at 1080p/12-bit resolution • Fully HDCP compliant • EDID 8/12-bit setting switch Note: 1. This system was tested with CAT6/23AWG/Solid cable, results may vary with cables of another specifcation. 2. Cable distance tested with Sony Playstation 3 (120 GB model), 37″ Philips 8-bit LCD TV and 40″ Samsung 12-bit LCD TV. 3. The figures provided in this manual are for reference only; actual performance may depend on the source and display used as well as the cable specification. 2 6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel INPUT HDMI CAT6 CAT6 OUT EDID 8 Bit 12 Bit 1 2 3 1 HDMI/CAT6 INPUT Switch: Allows users to select either HDMI or CAT6 as the input source. 2 8/12-bit EDID Switch: Allows users to change the output display’s EDID between 8-bit or 12-bit resolution. 3 CAT6 OUT: Connect to the CAT6 input of a compatible Single CAT6 to HDMI Receiver unit (see Section 8.2) attached to an display. 6.2 Rear Panel INPUT HDMI DC 5V CAT6 1 2 3 1 CAT6 IN: Connect to the CAT6 output of a compatible HDMI to Single CAT6 Transmitter unit (see Section 8.2) attached to an source device. 2 HDMI IN: Connect to the HDMI or DVI output (with a DVI to HDMI adaptor) of a source device such as a DVD/Blu-ray player or a Settop Box with an HDMI cable. 3 DC 5V: Connect the 5V DC power supply to the unit and plug the adaptor into an AC outlet. 3 7. CONNECTION DIAGRAM Option 1 Option 2 Option 3 DVD or Blu-ray Player DVD or Blu-ray Player DVD or Blu-ray Player HDMI Input HDMI Input HDMI Input DC 5V HDMI INPUT TX CAT6 OUT POWER CAT6 OUT 7 CAT6 OUT SYNC-RED 3D-ORG 8 HDMI IN CAT6 OUT 1 DC 5V HDMI to CAT6 Splitter CAT6 Cable (45m/8-bit) CAT6 Cable (45m/8-bit) INPUT HDMI INPUT DC 5V HDMI EX CAT6 INPUT HDMI CAT6 CAT6 OUT EDID 8 Bit 12 Bit INPUT HDMI CAT6 HDMI OUTPUT HDMI EX CAT6 OUT EDID 8 Bit 12 Bit CAT6 Cable (45m/8-bit) CAT6 IN INPUT DC 5V CAT6 INPUT HDMI CAT6 RX HDMI OUTPUT EX CAT6 OUT EDID 8 Bit 12 Bit CAT6 Cable (45m/8-bit) CAT6 Cable (45m/8-bit) CAT6 IN DC 5V DC 5V CAT6 CAT6 IN DC 5V RX HDMI OUTPUT DC 5V HDMI Output HDMI Output HDMI Output Display or TV Display or TV Display or TV RX 4 8. SPECIFICATIONS 8.1 Technical Specifications Video Bandwidth 2.25 MHz/6.75 Gbps Input Ports 1×HDMI (Female connector), 1×RJ45 Output Port 1×RJ45 EDID Setting TV HDMI Resolutions 480i~1080p@50/60, 1080p@24 & VGA~WUXGA (RB) HDMI Cable Distance 15m@1080p/8-bit or 12-bit CAT6 Cable Distance 45m@1080p/8-bit or 10m@1080p/12-bit ESD Protection Human body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge) Power Supply 5 V DC/1 A linear power adaptor (US/EU standards,CE/FCC/UL certified) or 5 V/1.2 A switching power adaptor (with universal plug, CE/FCC/UL certified) Dimensions 78.5 mm (W)×102 mm (D)×30 mm (H) Weight 182 g Chassis Material Aluminum Silkscreen Color Silver Power Consumption 4.1 W Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F Relative Humidity 20~90 % RH (non-condensing) 5 8.2 Compatible Products (Single CAT6) The models listed below are compatible with each other: • CLUX-8MCAT • CH-107TX • CH-107RXN • CH-1107TX • CH-1107EX 9. ACRONYMS ACRONYM COMPLETE TERM CAT5e Category 5 Cable CAT6 Category 6 Cable DVI Digital Visual Interface HDCP High-bandwidth Digital Content Protection HDMI High Definition Multimedia Interface 6 CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.tw