Download

HDFX-150-TR
DATA SHEET
Four (4) fibers Detachable HDMI Extender,
HDFX-150-TR
Contents








Description
Features
Applications
Technical Specifications
Absolute Maximum Ratings
Operating Conditions
Drawing of Module
Drawing of Cable Connection
 HDMI Pin Description
 Reliability Test
 Laser Safety Information
OPTICIS HQ
Opticis Co., Ltd.
# 16Fl, Kins Tower Jeongja 331,
8 Sungnam-daero, Bundang-gu
Sungnam-si, Gyunggi-do, 463-782
South Korea
Te l: +82 (31) 719-8033
Fax: +82 (31) 719-8032
www.opticis.com
[email protected]
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
HDFX-150-TR
Description
New optical HDMI extender, HDFX-150-TR consists of transmitter module and receiver module, each
of which has Four (4) LC fibers connection and is designed compact enough to be fitted into various
installation environments.
It enables to transmit WUXGA (1920x1200) or 1080p at 60Hz signal up to 300m (985feet), avoiding
any tricks like scaling or data compression for lessening a burden of data transmission and supports
3D contents transmission.
The pure fiber connection by four (4) LC fibers connector between transmitter and receiver, gives
clean, secure and easy installation with perfect electrical isolation, but without electrical hazard and
interference.
The HDFX-150-TR can be operated by USB power without external DC power adapter by plugging
the supplied USB to DC plug cables to each module.
In shipping group, two (2) short HMDI cables are also included so as to be mated to various types of
HDMI connectors.
The shipping items are shown as follows;
1) One (1) Transmitter (Tx) and One (1) Receiver (Rx)
2) Two (2) DC +5V 1A power adapter
3) Two (2) HDMI cables (0.5m)
4) Two (2) USB to DC plug cables
4) User’s Manual
※ Other options – contact with sales office
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
HDFX-150-TR
Features
• Extends WUXGA (1920x1200) at 60Hz (1.65Gbps/ch) or 1080p at 60Hz (36bit,
2.25Gbps/ch)
• Transmits HDMI data up to 300m (985feet) over four (4) LC multi-mode fibers
• Supports HDMI1.3, 36-bit color depth
• Supports 3D contents transmission
• Has HDMI receptacle and provides intermediate cable for flexible installation
• Supports Auto-power switching (Tx)
• Operated by USB power or DC power supplier
• Complies with CEC, EDID & HDCP
• Includes one (1) +5V, 1A DC power adapter / two (2) USB to DC plug cables for the
transmitter and receiver
• Size (WDH): 67 x 46 x 14mm
• Certifications: CE / FCC, Class 1 LASER Eye Safety
Applications

Digital HD-TV of types of LCD, PDP, projection and projectors for Home or Commercial
Entertainments

Digital HD-TVs for industrial applications such as medical appliances, aero traffic control,
factory, conference room, auditorium and bank

Digital FPDs and projectors in conference room and auditorium

Kiosk with digital FPDs showing full motion graphic displays from remote systems

HD-TVs for information display in public sites

LED signboards in streets or in stadiums
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
HDFX-150-TR
Technical Specifications
Parameter
Specifications
Laser Diodes in Tx Module
Multi-mode VCSEL
(Vertical Cavity Surface Emitting Laser)
Photo Diodes in Rx Module
GaAs PIN-PD/InGaAs PIN-PD
Input and Output signals
TMDS level
Components
Data Transfer Rate
Electrical
Max.
2.25Gbps
Total Jitter at the end of Rx output
Max. 300 ps
Skew inter-channels
Max. 10ns
Optical
Link Power Budget
Min. 9.4 dB
Mechanical
Module dimension (WDH)
46 x 67 x 14mm
Optical Connector
2 Duplex LC connectors
Electrical connector type from modules
and to HDTVs
HDMI receptacle
Recommended fiber
50um Multi-mode Glass fiber
Input
100~240V, 50~60Hz
Output
5V, 1A
Connect
External
Power
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device.
These are absolute stress ratings only. Functional operation of the device is not implied at these of
any other conditions in excess of those given in the operational sections of the datasheet. Exposure
to absolute maximum ratings for extended periods can adversely affect device reliability.
Parameter
Supply Adapter Voltage
Operating Temperature
Symbol
Min
Max
VCC
-
5.5
TOP
0
50
1)
Operating Relative Humidity
RHOP
10
85
Storage Temperature
Tstg
-30
70
RHstg
10
95
Storage Relative Humidity
2)
Unit
V
°
C
%RH
°
C
%RH
Note
1), 2) Under the conditions of No drops of dew
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
HDFX-150-TR
Operating Conditions
 Transmitter module: HDFX-150-T
Parameter
Power
Supply
Symbol
Min
Typ.
Max
Units
Supply Voltage
VCC
4.5
5.0
5.5
V
Supply current
ITCC
310
340
380
mA
Power Dissipation
PTX
1.4
1.7
2.1
W
Power Supply Rejection (Note1)
PSR
-
50
-
mVp-p
Data Output Load
RLD
Graphic Supply Voltage
TMDS
(Note2)
Ω
50
GVCC
+ 3.1
+ 3.3
+ 3.5
V
Single-Ended High Level
Input Voltage
GVIH
GVCC - 0.01
GVCC
GVCC + 0.01
V
Single-Ended Low Level
Input Voltage
GVIL
GVCC - 0.6
-
GVCC - 0.4
V
GVISWING
0.4
-
0.6
V
Single-Ended Input Swing Voltage
Transmitter
Optical
Link
(Note3)
Output Optical Power
Po
850 VCSEL Wavelength

840
850
860
980 VCSEL Wavelength

970
980
990
Ext
4
Extinction Ratio
Rising/Falling Time
-3
dBm
nm
dB
Trise/Tfall
260
ps
Tjitter
260
ps
Jitter in p-p value (Note4)
Receiver
Sensitivity
S
-15
-17
Receiving Wavelength

840
850
dBm
860
nm
Note1. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with
the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced.
Note2. Graphic Supply Voltage is regulated reference voltage for signal processing in modules
Note3. Measure signals at the end of 2 meter 50/125um MMGOF
Note4. Use PPG (Pulse pattern Generator) source with jitter 50ps
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
HDFX-150-TR
 Receiver module: HDFX-150-R
Parameter
Power
Supply
TMDS
Symbol
Min
Typ.
Max
Units
Supply Voltage
VCC
4.5
5.0
5.5
V
Supply current
ITCC
340
370
400
mA
Power Dissipation
PTX
1.53
1.85
2.2
W
Power Supply Rejection (Note5)
PSR
-
50
-
mVp-p
Data Input Load
RLD
Graphic Supply Voltage
Single-Ended Input Swing Voltage
Ω
50
GVCC
+ 3.1
+ 3.3
+ 3.5
V
GVISWING
0.2
-
0.4
V
Transmitter
Side Output Optical Power
Po
Wavelength

-3.0
840
dBm
850
860
nm
Receiver
Optical
Link
GaAs PD Receiving Wavelength

840
850
860
nm
InGaAs PD Receiving Wavelength

970
980
990
nm
Sensitivity
S
-15
-17
Link Power Budget
Pbgt
9.45
Total Jitter (note 6)
TRjitter
dBm
dB
260
ps
Note5. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with
the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced.
Note6. It is measured as total jitters including Tx and Rx modules under maximum extension, 300 meters with 2.25Gbps.
Recommended specifications of fiber-optic cable
Parameters
Conditions
Fiber Type
Modal Bandwidth
Fiber Cable Attenuation
Extension Distance
No. of Ferrules
Skew
Insertion Attenuation
Total Optical Attenuation
 = 850nm
 = 850nm
2 Duplex LC
In 330 ft (100 meter) extension
Copyright © 2015, All rights reserved by Opticis
Specifications
50m Multi-mode Graded Index Glass
Fiber
Min. 500 MHz km
Max. 2.5dB/km
10 – 990ft (300 meters)
4 ferrule
Max. 0.4ns
Max. 0.5dB
Max. 1.5dB
Jan, 2015
HDFX-150-TR
Drawing of Module
Note: The transmitter, HDFX-150-T and the receiver, HDFX-150-R have the same mechanical dimensions
Drawing of Cable Connection
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
HDFX-150-TR
HDMI Pin Description
No
Pin Assignment
Functional Description
1
TMDS2+
TMDS Data Signal Channel 2 Positive
2
TMDS2 Shield
TMDS Data Signal Channel 2 Shield
3
TMDS2-
TMDS Data Signal Channel 2 Negative
4
TMDS1+
TMDS Data Signal Channel 1 Positive
5
TMDS1 Shield
TMDS Data Signal Channel 1 Shield
6
TMDS1-
TMDS Data Signal Channel 1 Negative
7
TMDS0+
TMDS Data Signal Channel 0 Positive
8
TMDS0 Shield
TMDS Data Signal Channel 0 Shield
9
TMDS0-
TMDS Data Signal Channel 0 Negative
10
TMDS Clock+
TMDS Clock Channel
Positive
11
TMDS Clock Shield
TMDS Clock Channel
Shield
12
TMDS1Clock-
TMDS Clock Channel Negative
13
CEC
Consumer Electronics Control
14
Reserved
Not used
15
SCL
HDCP/DDC communication clock
16
SDA
HDCP/DDC communication data
17
DDC/CEC Ground
DDC/CEC shield
18
+5V Power
5 V Input for Transmitter for Host
5 V Output for Monitor from Receiver
19
Hot Plug Detect
Signal is driven by monitor to enable the system to identify the
presence of a monitor
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
HDFX-150-TR
Reliability Test
We have two kinds of test criteria for a continuous improvement of characteristics of Optical HDMI
interface module by our failure mode analysis program
1) Temperature & Humidity test
2) EMC test

- FCC
Temp. & Humidity Test
Items
Test
Conditions
Operation
Test
Operating at each
(1)
Temperature
-10 ~ 60 C
°
(step: 10 C)
Low Temperature
Ts
Low Temperature
Ts = 70 C
(3)
RH : 85%
Storage Test
°
(2)
°
= -30 C
Duration
Sample Size
30 min.
(each
Temperature)
N=5
96HR
N=5
96HR
N=5
°
Note 1) Evaluate display quality of Full HD TV connected to Graphic signal Generator (Quantum Data: GE-802B) at each
temperature.
Note 2) Ts: Storage Temperature
Note 3) RH: Relative Humidity
Copyright © 2015, All rights reserved by Opticis
Jan, 2015
Similar pages