UM375xx 300mA, Micropower, VLDO Linear Regulator UM375xxS SOT23-5 UM375xxP SOT353 General Description The UM375xx series are VLDO (very low dropout) linear regulators designed for low power portable applications. Typical output noise is only 170μVRMS(UM37512) and maximum dropout is just 200mV at the load current of 100mA.The internal P-channel MOSFET pass transistor requires no base current, allowing the device to draw only 90μA during normal operation at the maximum load current of 300mA. Other features include high output voltage accuracy, under voltage lockout, stability with ultra low ESR ceramic capacitors as small as 1μF, thermal overload protection and output current limiting. The UM375xx series are available in a low profile SOT23-5 and SOT353 package. Applications Features Bluetooth/802.11 Cards PDAs and Notebook Computers Portable Instruments and Battery-Powered Systems Cellular Phones Pin Configurations Input Voltage Range: 2.0V to 6.0V Very Low Dropout: 200mV(Max) at 100mA Low Noise:170μVRMS (UM37512，10Hz to 100kHz) ±2% Voltage Accuracy at 150mA Fixed Output Voltage: 1.2V to 5.0V with 100mV Interval Output Current Limit Stable with 1μF Output Capacitor Thermal Overload Protection Low Profile SOT23-5 and SOT353 Package Top View 5XX M: Month Code UM375xxS SOT23-5 ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 1/12 UM375xx VXX M: Month Code UM375xxP SOT353 Pin Description Pin Number Symbol 1 IN 2 GND 3 ____________ SHDN 4 NC 5 OUT Function Power Supply Ground Shutdown Input, Active Low Not Connected Voltage Regulated Output ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 2/12 UM375xx Ordering Information Part Number UM37512S UM37513S UM37514S UM37515S UM37516S UM37517S UM37518S UM37519S UM37520S UM37521S UM37522S UM37523S UM37524S UM37525S UM37526S UM37527S UM37528S UM37529S UM37530S UM37531S UM37532S UM37533S UM37534S UM37535S UM37536S UM37537S UM37538S UM37539S UM37540S UM37541S UM37542S UM37543S UM37544S UM37545S UM37546S UM37547S UM37548S UM37549S UM37550S Output Voltage 1.2V 1.3V 1.4V 1.5V 1.6V 1.7V 1.8V 1.9V 2.0V 2.1V 2.2V 2.3V 2.4V 2.5V 2.6V 2.7V 2.8V 2.9V 3.0V 3.1V 3.2V 3.3V 3.4V 3.5V 3.6V 3.7V 3.8V 3.9V 4.0V 4.1V 4.2V 4.3V 4.4V 4.5V 4.6V 4.7V 4.8V 4.9V 5.0V Packaging Type SOT23-5 Marking Code 5ED 5EE 5EH 5EJ 5EL 5EM 5EK 5EF 5EC 5ES 5ET 5EY 5EU 5EN 5EZ 5EP 5EQ 5EB 5ER 5EA 5DD 5DE 5DB 5DF 5DH 5DA 5DL 5DT 5DM 5DY 5DJ 5DN 5DV 5DP 5DZ 5DQ 5DR 5D9 5DS Shipping Qty 3000pcs/7Inch Tape & Reel ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 3/12 UM375xx Ordering Information (Continued) Part Number UM37512P UM37513P UM37514P UM37515P UM37516P UM37517P UM37518P UM37519P UM37520P UM37521P UM37522P UM37523P UM37524P UM37525P UM37526P UM37527P UM37528P UM37529P UM37530P UM37531P UM37532P UM37533P UM37534P UM37535P UM37536P UM37537P UM37538P UM37539P UM37540P UM37541P UM37542P UM37543P UM37544P UM37545P UM37546P UM37547P UM37548P UM37549P UM37550P Output Voltage 1.2V 1.3V 1.4V 1.5V 1.6V 1.7V 1.8V 1.9V 2.0V 2.1V 2.2V 2.3V 2.4V 2.5V 2.6V 2.7V 2.8V 2.9V 3.0V 3.1V 3.2V 3.3V 3.4V 3.5V 3.6V 3.7V 3.8V 3.9V 4.0V 4.1V 4.2V 4.3V 4.4V 4.5V 4.6V 4.7V 4.8V 4.9V 5.0V Packaging Type SOT353 Marking Code VL2 VL3 VL4 VL5 VL6 VL7 VL8 VL9 VLA VM1 VM2 VM3 VM4 VM5 VM6 VM7 VM8 VM9 VMA VJ1 VJ2 VJ3 VJ4 VJ5 VJ6 VJ7 VJ8 VJ9 VJA VT1 VT2 VT3 VT4 VT5 VT6 VT7 VT8 VT9 VTA Shipping Qty 3000pcs/7Inch Tape & Reel ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 4/12 UM375xx Absolute Maximum Ratings (Note 1) Symbol VIN VOUT TJ TSTG Parameter Value Unit Supply Voltage on IN Pin -0.3 to +7.5 V Voltage on OUT Pin -0.3 to +7.5 V Operating Junction Temperature (Notes 2, 3) -40 to +125 °C Storage Temperature Range -65 to +150 °C TL Lead Temperature for Soldering 10 seconds +300 °C Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: The UM375xx is tested and specified under pulse load conditions such that TJ≈TA. The device is guaranteed to meet performance specifications from 0℃ to 70℃. Specifications over the – 40℃ to 125℃ operating junction temperature range are assured by design, characterization and correlation with statistical process controls. Note 3: This IC includes overtemperature protection that is intended to protect the device during momentary overload conditions. Junction temperature will exceed 125℃ when overtemperature protection is active. Continuous operation above the specified maximum operating junction temperature may impair device reliability. ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 5/12 UM375xx Electrical Characteristics VCC=VOUT+1V(VOUT≥1.5V) or VCC=2.5V(VOUT≤1.5V),TA= -40℃ to +85℃. Symbol Parameter Test Conditions Min Typ Max VIN Input Voltage Range 2.0 6 Output Voltage VOUT 1.2 5.0 Range IOUT=0mA 50 120 Operating Quiescent IQ Current IOUT=300mA 90 130 Unit V V μA _____________ __________ ISHDN IOUT ΔVDO ILIMT t SHDN Input Current Output Current _____________ 1 SHDN =VIN or GND 300 Output Voltage Accuracy 1mA≤IOUT≤300mA, TA= -40℃ to +85℃ Dropout Voltage Output Current Limit Startup Time Response IOUT=100mA mA -2.5 330 RL=68Ω, COUT=1μF μA 150 450 +2.5 % 200 700 mV mA μs 40 _____________ VIL SHDN Input Low Voltage 0.4 V _____________ VIH TSHDN ΔTSHDN SHDN Input High Voltage Output Voltage TC Thermal-Shutdown Temperature Thermal-Shutdown Hysteresis Line Regulation (VOUT＞4.0V) Line Regulation (VOUT≤4.0V) Load Regulation (VOUT＞4.0V) Load Regulation (VOUT≤4.0V) Output Voltage Noise PSRR Power Supply Ripple Rejection (VOUT＞4.0V) Power Supply Ripple Rejection (VOUT≤4.0V) ESD Rating 0.6Vcc V 100 ppm/℃ 160 ℃ 35 ℃ VOUT+0.3V≤VIN≤6.0V or VIN>2.5V IOUT=10mA 0.5 %/V 0.3 1.2 VIN=VOUT+1V or VIN>2.5V 1mA≤IOUT≤300mA 10Hz to 100kHz CIN=1μF, IOUT=10mA VIN=VOUT+1V or VIN>2.5V IOUT=100mA % 0.6 UM37512 170 UM37533 250 UM37550 295 f=100Hz 40 f=10kHz 30 f=100Hz 60 f=10kHz 30 Human Body Mode 2 μVRMS dB kV ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 6/12 UM375xx Typical Performance Characteristics Quiescent Current vs Input Voltage Output Voltage vs Input Voltage UM37518, Iout=0mA UM37518，Iout=100mA Output Voltage Voltage Output VoltagevsvsInput Input Voltage Output Voltage vs Output Current 3.320 Output Voltage(V) 3.315 UM37518，VIN=2V 3.310 3.305 3.300 3.295 3.290 UM37533，Iload=10mA 3.285 3.280 3.5 4 4.5 5 5.5 6 Input Voltage(V) OutpoutVoltage Voltage vs Output vs Output OutputCurrent Current Dropout Voltage vs vs Output Current Dropout Voltage Output Current 3.34 350 3.33 300 Dropout Voltage(mV) Output Voltage(V) 3.32 3.31 3.30 3.29 3.28 UM37533, VIN=4.3V 3.27 250 200 150 100 UM37533 50 3.26 0 3.25 0 50 100 150 200 Output Current(mA) 250 300 0 25 50 75 100 125 150 175 200 225 250 275 300 Output Current(mA) ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 7/12 UM375xx Typical Performance Characteristics (Continued) Outpout Voltage vs Output Voltage vsTemperature Temperature PSRR PSRR vs vs Frequency Frequency 100 3.330 80 3.310 PSRR(dB) Outpout Voltage(V) 3.320 3.300 3.290 UM37533, VIN=4.3V 3.280 60 40 20 UM37533, Iload=100mA 3.270 -40 -20 0 25 35 45 55 65 75 85 95 105 115 125 Temperature(℃) Line Transient Response Vin=4.0V to 5.0V VOUT=3.3V (50mV/div) Iload=150mA, 50us/div 0 10 100 1000 10000 100000 Frequency(Hz) Load Transient Response IOUT=10mA to 150mA VOUT=3.3V(100mV/div) VIN=4.3V, 100us/div ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 8/12 UM375xx Pin Function IN (Pin 1): Power for UM375xx and Load Power is supplied to the devices through the IN pin. The IN pin should be locally bypassed to ground if the UM375xx series are more than a few inches away from another source of bulk capacitance. In general, the output impedance of a battery rises with frequency, so it is usually advisable to include an input bypass capacitor in battery-powered circuits. A capacitor in the range of 0.1μF to 1μF is usually sufficient. GND (Pin 2): Ground and Heat Sink. Solder to a ground plane or large pad to maximize heat dissipation. _____________ SHDN (Pin 3): Shutdown, Active Low. This pin is used to put the UM375xx into shutdown. The _____________ SHDN pin cannot be left floating and must be tied to the input pin if not used. NC (Pin 4): Not Connected. OUT (Pin 5): Voltage Regulated Output. The OUT pin supplies power to the load. A minimum output capacitor of 1μF is required to ensure stability. Larger output capacitors may be required for applications with large transient loads to limit peak voltage transients. Typical Application Circuit VIN IN VOUT OUT UM375xx 1μF 1μF SHDN GND ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 9/12 UM375xx Package Information UM375xxS: SOT23-5 Outline Drawing D b θ Symbol 5 E E1 4 2 3 L 1 e c 0.2 e1 A1 A End View A2 Top View Side View A A1 A2 b c D E E1 e e1 L θ DIMENSIONS MILLIMETERS Min Max 1.050 1.250 0.000 0.100 1.050 1.150 0.300 0.500 0.100 0.200 2.820 3.020 1.500 1.700 2.650 2.950 0.950REF 1.800 2.000 0.300 0.600 0° 8° INCHES Min Max 0.041 0.049 0.000 0.004 0.041 0.045 0.012 0.020 0.004 0.008 0.111 0.119 0.059 0.067 0.104 0.116 0.037REF 0.071 0.079 0.012 0.024 0° 8° Land Pattern 2.40 0.90 0.60 0.95 NOTES: 1. Compound dimension: 2.92×1.60; 2. Unit: mm; 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. 0.95 5XX M Tape and Reel Orientation ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 10/12 UM375xx UM375xxP: SOT353 Outline Drawing Symbol D θ L e1 4 2 3 L1 1 E E1 5 b 20 c e Top View A A1 A2 End View Side View A A1 A2 b c D E E1 e e1 L L1 θ DIMENSIONS MILLIMETERS Min Max 0.900 1.100 0.000 0.100 0.877 1.000 0.150 0.350 0.080 0.220 1.800 2.200 1.150 1.350 2.000 2.450 0.650REF 1.200 1.400 0.488REF 0.260 0.460 0° 8° INCHES Min Max 0.035 0.043 0.000 0.004 0.035 0.039 0.006 0.014 0.003 0.009 0.071 0.087 0.045 0.053 0.079 0.096 0.026REF 0.047 0.055 0.020REF 0.010 0.018 0° 8° Land Pattern 1.94 1.30 0.80 NOTES: 1. Compound dimension: 2.00×1.25; 2. Unit: mm; 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. 0.35 VXX M Tape and Reel Orientation ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 11/12 UM375xx IMPORTANT NOTICE The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: Unit 606, No.570 Shengxia Road, Shanghai 201210 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com ________________________________________________________________________ http://www.union-ic.com Rev.06 Dec.2014 12/12