CSI-8H8CVTX 8 HDMI over CAT5e/6/7 Point-to-Point Transmitter Operation Manual Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice. Copyright Notice No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from Cypress Technology. © Copyright 2011 by Cypress Technology. All Rights Reserved. Version 1.1 August 2011 Trademark Acknowledgments All products or service names mentioned in this document may be trademarks of the companies with which they are associated. Safety Precautions Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product. • Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. • Do not attach the power supply cabling to building surfaces. • Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. • Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. • To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit. Revision History Version No. Date DD/MM/YY Summary of Change VR0 03/08/12 Preliminary Release Contents 1. Introduction�������������������������������������������� 1 2. Applications������������������������������������������� 1 3. Package Contents�������������������������������� 1 4. System Requirements���������������������������� 1 5. Features�������������������������������������������������� 2 6. Operation Controls and Functions������� 3 6.1 Front Panel����������������������������������������3 6.2 Rear Panel�����������������������������������������4 7. Connection Diagram���������������������������� 5 8. Specifications���������������������������������������� 7 9. Acronyms����������������������������������������������� 8 1. Introduction The 8 HDMI over CAT5e/6/7 Point-to-Point Transmitter supports the transmission of uncompressed video (up to 1080p@60 Hz/36-bit) with multichannel digital audio from up to eight high definition sources to up to eight CAT6 outputs. Also, the unit can be used in conjunction with the 8×8 HDMI matrix (optional) to provide switching control, allowing the display of any source device on any output display. 2. Applications • Commercial advertising and display • Lecture room display • Hyper market demonstration 3. Package Contents • HDMI over CAT6 Transmitter • 1×24 V/6.25 A DC Adaptor • Operation Manual 4. System Requirements • HDMI equipped input source devices • Industry standard CAT5e/6/7 cables 1 5. Features • HDMI, HDCP 1.1 and DVI compliant • Supports HDMI 3D and 4K×2K features • Support CEC bypass • Supports PoE (Power over Ethernet) on compatible receivers only • Supports audio up to 7.1Ch, Dolby TrueHD and DTS-HD Master Audio • Supports high bit-rate audio up to 192 kHz • Supports resolutions VGA~WUXGA and 480i~1080p dependent upon the output display’s EDID settings • Supports uncompressed video up to 1080p@60 Hz/36-bit • Supports extension up to 100 meters through CAT5e/6/7 • Supports 3D signal display dependent upon the output display's EDID settings • Supports HDMI input up to 10 meters at 8-bit resolution or 6 meters at 12-bit resolution • 1U size design Note: The PoE function is designed for powering compatible receiver units only—non-PoE receivers will need their own power supply. Receivers of another brand may not be compatible. 2 6. Operation Controls and Functions 6.1 Front Panel 1 1 POWER 3 The LED will illuminate in blue when the power is on. 6.2 Rear Panel 1 CAT Out CAT Out CAT Out CAT Out CAT Out CAT Out CAT Out CAT Out GND V+ HDMI In 1 HDMI In 2 HDMI In 3 HDMI In 4 HDMI In 5 HDMI In 6 HDMI In 7 HDMI In 8 GND 2 1 4 3 DC 24V +V GND 2 3 1 CAT Out Connect to the Receiver units with a single CAT5e/6/7 cable for HDMI Audio/Video, IR, and RS-232 signals transmission. Note: Please do not miss connect CAT5e/6/7 ports with receiver device's LAN port doing so will destroy the device. 2 HDMI In 1~8 Connect to the HDMI input source devices such as a DVD player or a Set-top Box with HDMI cables or DVI to HDMI cables. 3 DC 24V Plug the 24 V DC power supply into the unit and connect the adaptor to an AC outlet. This unit will also power PoE (Power over Ethernet) capable receiver units or non PoE receiver units. 4 7. Connection Diagram ZONE A ZONE B ZONE C ZONE D Displays HDMI Outputs Receiver Units RX Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In RX Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In RX Power RX Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In Single CAT 5e/6 Cable Transmitter 8x8 HDMI Matrix (Optional) HDMI Inputs Source Equipment 5 CAT Out CAT Out HDMI In 1 LAN CAT Out HDMI In 2 CAT Out HDMI In 3 A HDMI Out B HDMI Out C HDMI Out 1 HDMI In 2 HDMI In 3 HDMI In 1 2 3 IR-In RS-232 C HDMI In 4 Service ZONE E RX CAT Out Power ZONE F RX Link IR 2 IR 1 Extender Blaster CAT Out RS232 Out CAT Out CAT5e/6 In CAT Out GND V+ HDMI In 5 HDMI In 6 HDMI In 7 HDMI In 8 Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In ZONE G RX Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In ZONE H RX Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In GND 2 1 4 3 DC 24V +V GND Power Supply D HDMI Out E HDMI Out F HDMI Out G HDMI Out H HDMI Out GND V+ GND 2 V+ GND 4 HDMI In 5 HDMI In 6 HDMI In 7 HDMI In 8 HDMI In 4 5 6 7 8 34 1 1 43 2 GND V+ +VGND GND DC 24V Power Supply 6 8. Specifications Video Bandwidth 300 MHz/10.2 Gbps Input Ports 8×HDMI Output Ports 8×CAT5e/6/7 Input / Output Resolution VGA~WUXGA, 480i~1080p HDMI Cable Distance Up to 10 meters@8-bit, 6 meters@12-bit CAT Cable Distance Up to 100 meters@CAT5e/6/7 cable ESD Protection Human-body Model: ±8 kV (Air-gap discharge) ±4 kV (Contact discharge) Power Supply 24 V/6.25 A DC (US/EU standards, CE/ FCC/UL certified) Dimensions 432 mm (W)×179 mm (D)×49mm (H) Weight 2000 g Chassis Material Metal Silkscreen Color Black Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF Storage Temperature −20 ºC~60 ºC/−4 ºF~140 ºF Relative Humidity 20~90 % RH (non-condensing) Power Consumption 71 W (Including PoE Receiver) 7 9. Acronyms ACRONYM COMPLETE TERM DTS Digital Theater System HDCP High-bandwidth Digital Content Protection HDMI High-Definition Multimedia Interface HDTV High-Definition Television LCM Liquid Crystal Monitor 8 CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.tw