GDT Product Catalog

PRODUCT
CATALOG
& DESIGN
GUIDE
Gas Discharge Tube (GDT)
Products
Gas Discharge Tubes
TABLE OF CONTENTS
GDT Characteristics, Terms and Consideration Factors
Legal Disclaimers
Lead Free
RoHS Compliant
Cartridge Clip
Radial Lead
Axial Lead
Operating
Temperature
Range
Surface
Max AC Peak Pulse
Max
Surge
Current
Capacitance
Rating
(8x20µs)
Mini Tube
Mounting Options
# Terminals
Series
Name1
DC
Breakover
Voltage
Range
(Nom VBO)
High Voltage GDTs
AC
285 - 600
5000A
1.5pF
NA
CG3
1000 - 7500
2
•
•
•
•
•
•
-40°C to +90°C
5000A
1.5pF
2
Low to Medium Surge GDTs
CG5
90 - 600
5A
5000A
1.5pF
2
•
•
SL0902A
90 - 600
5A
5000A
1.5pF
2
•
•
•
•
SL1002A
75 - 600
5A
5000A
1.2pF
2
•
•
•
•
•
•
•
•
•
•
•
•
-40°C to +90°C
SL1003A
90 - 500
SL1010A
75 to 470
SL1011A
75 - 600
10A*
5A
10,000A
1.5pF
3
5000A
1.5pF
3
•
5000A
1.5pF
2
•
3
•
•
Medium to High Surge GDTs
SL1122A
90 - 260
10A*
10000A*
100-270pF
SL1021A
75 - 600
10A*
20000A*
1.5pF
•
•
•
•
•
•
3
•
•
•
•
•
•
•
-40°C to +90°C
SL1411A
75 - 600
10A
10000A
1.5pF
2
CG/CG2
75 - 1000
20A
20000A
1.5pF
2
10A*
20000A*
1.5pF
•
Very High Surge GDTs
SL1021B
75 - 600
3
•
•
•
•
•
•
2
•
•
2
•
•
-40°C to +90°C
SL1026
275 - 700
10A*
40000A*
3
•
Squared GDTs
SE
140 to 500
0.5KA
0.5pF
SG
75 to 600
1KA / 2KA
1pF
(1) Please refer to product data in our datasheets for detailed information by part number.
* Total current through center (ground) terminal
© 2015
2015 Littelfuse,
Littelfuse, Inc.
Specifications are
subject toand
change
without
notice.in this literature are
Specifications,
descriptions
illustrative
material
as
accurate
as known at the time of publication, but are subject to change
Revised:
12/18/15
without notice. Visit www.littelfuse.com for more information.
-40°C to +90°C
Gas Discharge Tubes
GDT Characteristics, Terms and Consideration Factors
A Comparison of Surge Arrester Technologies
Surge Arresters
Littelfuse gas discharge tube (GDT) surge arrester devices
protect personnel and electrical equipment from damaging
high voltage transients induced by lightning, inductive
switching, or electrostatic discharge. Depending upon the
application, Littelfuse offers a variety of two and three
electrode GDTs for protecting telecommunication, test,
computer, power supply, medical, and cable television
equipment. Along with protecting circuits, GDTs can also
be used as switches to create a discharge voltage in circuits
used for medical, gas ignition, and HID lighting applications.
Why Use Surge Protection?
Surge protectors protect personnel and equipment from
damaging high-voltage surges from lightning, inductive
switching, nuclear electromagnetic pulse, electrostatic
discharge, or interference from power supply lines. From
a design point of view, protection circuits only cost money
and, if customer requirements or regulatory agencies do not
require them, they will easily be forgotten. Yet, appropriate
surge protection is beneficial. Protected equipment will not
be affected by the highvoltage surges listed above. This will
result in:
• Reduced field failures
• Improved product quality and reliability
• Reduced cost of quality
The figure below illustrates the cost effectiveness of adding
surge protection by demonstrating the unit repair cost to
break even over a range of return rates for added protection
costs of $0.50/unit and $1.00/unit.
Cost Effectiveness
2.0%
Protection
Cost/Unit
(Breakeven)
$1.00
$0.50
Return Rate
1.5%
1.0%
0.5%
0.0%
0
50
100 150 200 250 300 350 400 450
Unit Repair Cost ($)
Through ongoing research and engineering improvements,
Littelfuse has developed a family of Surge Protection
Products that offer impressive characteristics for a variety of
applications. Four differentiating characteristics are found in
every Littelfuse Surge Protection Product:
In today’s world of sensitive electronics, an increasingly
important topic has become the protection of electronic
components from overvoltage surges. There is a multitude
of devices on the market for this purpose but what are
the differences between them and which is best for
what application? The following describes, analyzes, and
compares these devices in detail.
Basically there are two types of surge protection
classifications with each consisting of its own group of
devices:
CROWBAR
Air Gap
Carbon Block
Gas Discharge Tube (GDT)
Silicon Controlled Rectifier (SCR)
CLAMP
Zener (Avalanche) Diode
Metal Oxide Varistor (MOV)
-----------------------------------------------------CROWBAR PROTECTION: A crowbar device limits
the energy delivered to the protected circuit by abruptly
changing from a high impedance state to a low impedance
state in response to an elevated voltage level. Having been
subjected to a sufficient voltage level the crowbar begins to
conduct. While conducting, the voltage across the crowbar
remains quite low (typically less than 15 volts for gas
discharge tubes usually higher for the air gap and carbon
block protectors) and thus, the majority of the transient’s
power is dissipated in the circuit’s resistive elements and
not in the protected circuit nor the crowbar itself. This
allows the crowbar to be able to withstand and protect loads
from higher voltage and/or higher current levels for a greater
duration of time than clamping devices.
AIR GAP PROTECTOR: An air gap protector consists
of two conductive surfaces with a spacing between them
that will permit an arc when a specified potential is placed
across the surfaces. The air gap is not a sealed device and
therefore it must operate at atmospheric pressure and
under the effects of the environment. Since the electrodes
are exposed to the environment, they will often experience
oxidation and corrosion which is not a problem common to a
gas tube such as Littelfuse’s GDT. These factors contribute
to the air gap’s high nominal breakdown voltage, wide
breakdown voltage tolerance, and poor impulse response.
Often an air gap is placed in parallel with a gas discharge
tube or carbon block protector to provide back up protection
in the event that the primary protection fails.
• High surge current rating
• Long life
• Fast response
• Rugged construction
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
GDT Characteristics, Terms and Consideration Factors (continued)
Comgap Gas Discharge Tube
Voltage vs. Current Characteristics
15
GDT GAS DISCHARGE TUBE:
Littelfuse’s GDT, a hermetically sealed gas filled ceramic
tube with metal electrodes, is recognized for:
• Stable electrical parameters
• High insulation resistance
• Low capacitance
• High current capability
• Low leakage current
• Low arc voltages
For a gas tube to begin conduction, an electron within the
sealed device must gain sufficient energy to initiate the
ionization of the gas. Complete ionization of the gas takes
place through electron collision. The events leading up to
this phenomenon occur when a gas tube is subjected to a
rising voltage potential. Once the gas is ionized, breakdown
occurs and the gas tube changes from a high impedance
state to a virtual short circuit and thus, any transient will
be diverted from and will not reach the protected circuit.
The arc voltage (the voltage across the gas tube while the
gas tube is conducting) will typically be 15 volts. After the
transient has passed, the GDT will extinguish and again
appear as an open circuit. In order to insure gas tube turn
off at the zero crossing in AC applications, the current
through the GDT once the transient has passed, must
be less than the follow-on current rating of the gas tube.
The follow-on current requirement can easily be met by
placing a resistor in series with the gas tube. Littelfuse’s AC
series gas discharge tube surge arresters were developed
specifically to protect AC power lines and normally will not
require additional components to limit follow-on current. In
DC applications, the gas discharge tube will extinguish as
long as the device is operated within the specified holdover
conditions. Holdover conditions involve the maximum bias
voltage that can appear across a gas discharge tube under
specified current conditions and still allow the gas discharge
tube to turn off. Under normal operating conditions, the GDT
shunted across a circuit, will act like an open switch with a
high insulation resistance.
.00001
Current (A)
The GDT’s breakdown voltage is determined by electrode
spacing, gas type (usually neon and/or argon), gas pressure
(less than atmospheric), and the rate of rise of the transient.
Breakdown voltage is defined as that voltage at which
a crowbar type of surge arrester changes from a high
impedance state to a low impedance state. The GDT series
is categorized by the breakdown voltage of each gas tube
when a slowly rising transient is applied. For example:
Littelfuse’s CG2-230L gas tube will breakdown at 230V
(+/- 15% to 20%) when subjected to a ramp with a rate of
rise of 100V/second. The breakdown voltage response of a
crowbar to transients with ramp rates of 1V/microsecond or
less is referred to as the DC breakdown voltage level. Due
to the nature of gas discharge tubes, the same gas tube will
experience breakdown at a higher voltage as a transient’s
ramp rate increases. For example: At 100V/microsecond, the
CG2-230L gas tube will breakdown at 600V maximum. The
breakdown voltage response of a crowbar to transients with
ramp rates greater than 1V/microsecond is referred to as the
impulse breakdown voltage level.
Due to the GDT’s rugged construction, it can handle currents
that far surpass other transient suppressors’ capabilities
- greater than 10 pulses of a 20,000 peak amperes pulse
having a rise time of 8 microseconds decaying to half value
in 20 microseconds (also referred to as an 8/20 wave form).
The surge life of the GDT is at least 1000 shots of a 500
amperes peak 10/1000 pulse. GDT is the practical device
for the protection of telephone circuits, AC power lines,
modems, power supplies, CATV and almost any application
where protection from large and/or unpredictable transients
is desired.
)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Breakdown
Voltage
Voltage (V)
CARBON BLOCK PROTECTOR: A carbon block
protector consists of a pair of carbon elements separated
by a 0.003-0.004 inch air gap. When a specified potential is
placed across the carbon surfaces an arc will be initiated.
Like the air gap protector, the carbon block is an unsealed
device and its performance suffers in the same manner
as the air gap. Carbon block protectors are used mainly for
telephone line protection but are being replaced, in most
installations, with the more reliable and consistent gas
discharge tubes.
Gas Discharge Tubes
GDT Characteristics, Terms and Consideration Factors (continued)
voltage. The zener is a good protector for circuits operating
at low voltages. Caution is advised when designing the
device into RF circuits due to the diode’s high capacitance.
Also available are silcon avalanche suppressers which are
referred to as transient voltage suppressers (TVS) diodes.
These diodes consist of fairlyBreakdown
large junction zeners which
have been designed specifically
for surge protection. The
Voltage
TVS diodes are rated for higher current surges than zener
Zener
diodes and they Voltage
can carry these currents for periods of 2-10
microseconds.
For use in AC signal lines, two zeners
130 are required. These
are available as packagedCurrent
devices.
Avalanche diodes are
(mA)
often used to protect IC’s from static discharge and other
forms of transients in power supplies computer buses, and
data lines.
Avalanche Diode
Voltage vs. Current Characteristics
Breakdown
Voltage
Voltage (V)
Voltage (V)
SCR
Voltage vs. Current Characteristics
Leakage
Region
Unlike the crowbar devices discussed above, the SCR is
a semiconductor. Like the GDT, the SCR will have a very
low voltage drop across it while conducting. The SCR does
require a trigger signal when a surge is present before it
can begin to conduct. This trigger signal is usually supplied
through the use of a zener diode. Packages that combine
the SCR and zener diode are now available. These packages
are monolithic devices and often contain an SCR-type
thyristor with a gate region that acts like the avalanche
diode. Once triggered, the SCR begins to conduct, dropping
the voltage across the zener diode to a value below the
zener’s operating voltage and thus causing the zener to stop
conducting. The SCR will conduct until the applied voltage
drops to zero (zero crossing of AC) or until the current falls
below a specified value (sometimes referred to as a holding
current).
Voltage (V)
SILICON CONTROLLED RECTIFIER (SCR):
SCR
Voltage vs. Current Characteristics
Clamping
Voltage
Zener
Voltage
130
Current (mA)
Although typically having a faster response time than a
GDT, the SCR package is subject to higher leakage current
and capacitance. The
SCR package
can handle currents
Avalanche
Diode
of several
hundred
an 8/20 wave form and
Voltage
vs.amperes
CurrentofCharacteristics
packages are available that offer bi-directional protection.
CLAMPING PROTECTION: A clamping device actually
Leakage
Region
Voltage (V)
limits the voltage transient to a specified level by varying
its internal resistance
in response to the applied voltage.
Clamping
Voltage
A clamping device must
absorb the transient’s energy
and therefore, cannot withstand very high current levels.
Although these devices have quick response times, they are
subject to leakage currents and their capacitance values are
higher than those found in the GDT.
ZENER (AVALANCHE) DIODE: The zener diode
comes closest to.001
modeling the ideal constant voltage clamp.
(A) voltage potential and is
It responds quickly to aCurrent
fast rising
available for a fairly wide range of clamping voltages (from
less than 10 volts up
to several hundred volts). The zener is placed in parallel with
the circuit to be protected and will not operate until a surge
exceeds the zener’s breakdown voltage. The surge, causing
the zener to conduct will be clamped to the zener’s rated
.001
Current (A)
MOV (METAL OXIDE VARISTOR): As its name
suggests, the MOV is a voltage variable resistor made
from sintered metal oxides. The grains produced in the
sintered metal oxide material of the MOV can be thought
of as a network of series and parallel diodes. As the voltage
potential across the MOV increases, some of the diodes
experience avalanche breakdown and begin to conduct and
as a result, reduce the net resistance of the MOV.
The MOV can handle current pulses of higher peak values
and for a longer duration than a diode, but the MOV can
experience cumulative degradation and performance
changes after it is exposed to large current pulses when
not properly selected. The high peak current surges
tend to fuse the oxide grains and thus alter the MOV’s
performance. Some engineers recommend that a fuse be
used with an MOV as a large current surge could damage
the grain structure, fuse the grains together and result in the
protected circuit being shorted out.
The MOV is available in a wide range of voltages and
experiences a quick turn on time when subjected to a fast
rising surge. The MOV is subject to leakage current and high
capacitance (10’s to 1000’s of picofarads). When designing
with a MOV it is necessary to remember that as the current
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
GDT Characteristics, Terms and Consideration Factors (continued)
through the device increases, the voltage which the MOV
clamps at is greatly increased.
Upturn
Region
Leakage
Region
Voltage (V)
MOV
Voltage vs. Current Characteristics
In contrast, most devices in Littelfuse’s High Energy Devices
product line are glass-to-metal units. This allows greater
flexibility in configuration and is ideal for the production of
standard and custom parts in more limited quantities. The
electrodes of High Energy Devices are usually made of
refractory metals such as tungsten or molybdenum to meet
more extreme life and surge capacity requirements.
Clamping
Voltage
.001
Gas Discharge Tube
Typical Operating Characteristics
1000
Current (A)
A
B
C
D
E
F
G
is no one ideal surge arrester device type that meets all
Due to their complementary performance characteristics,
MOV
however, aGAS
GDTTUBE
and MOV can beSCR
combined in a circuit
to
provide theCG2-230L
ultimate in surge suppression performance. The
MOV quickly clamps a fast rising voltage surge while the
GDT crowbars
to safely dissipate
the large peak current
to
of Device
CROWBAR
CROWBAR
CLAMP
ground. (See
Note<100nSEC.
entitled “Surge Protection
of
nse Speed
<1Application
uSEC.
<100nSEC.
AC Power Lines”.)
itance
1pF MAX.
50pF
45pF
ge Current
<1 pAMP
50 nAMPS
10,000 nAMPS
SUMMARIZED
COMPARISON
um Surge
20,000
AMPS OF TECHNOLOGIES
500 AMPS
200AMPS
ent (8/20 µsec wave form)
GAS TUBE
Type of Device
$1.00
SCR
MOV
CROWBAR
CROWBAR
CLAMP
<1 pAMP
20,000 AMPS
50 nAMPS
500 AMPS
$1.00
$1.50
CG2-230L
$1.50
DIODE
$0.50
CLAMP
Volts
GDT and MOV PROTECTION: In summary, there
ARIZED COMPARISON
TECHNOLOGIES
of the keyOF
performance
parameters for every application.
ve Cost
plating and the final seal is made in a gasfilled vacuum
furnace using braze preforms made of copper-silver eutectic.
The electrodes used for GDTs are either copper or a nickeliron alloy, often with a coating to lower the work function
and/or add gettering capability. Stripes or bands of semiconductive material are applied to the inner surfaces of the
ceramic to improve stability and high-speed response.
VB
DIODE
A'
10
-21
10
-15
10
$1.50
ARE product engineering department provides objective technical expertise and application assistance to designer’s of switching the
Response Speed
<1 uSEC.
<100nSEC.
<100nSEC.
<100nSEC.
rotection systems. Our mission is to assist you in designing the best solution to your specific application problem, regardless of
Capacitance
1pF MAX.
50pF
45pF
50pF
cturer. To access our team of engineering professionals call toll free 1-800 CPCLARE.
Leakage Current
Maximum Surge Current
(8/20 µsec wave form)
Relative Cost
10,000 nAMPS 10,000 nAMPS
200 AMPS
50 AMPS
$0.50
$1.50
The CLARE product engineering department provides objective technical expertise and
application assistance to designer’s of switching surge protection systems. Our mission is
to assist you in designing the best solution to your specific application problem, regardless
manufacturer. To access our team of engineering professionals call toll free 1-800
CPCLARE.
CONSTRUCTION: Gas Discharge Tube (GDT) surge
arresters commonly employ hermetically-sealed enclosures
utilizing either ceramic-to-metal or glass-to-metal seals. The
many advantages of ceramic-to-metal units have made them
the norm for gas discharge tube surge arresters such as
Littelfuse’s GDTs. Along with being low cost, they offer high
product uniformity capable of handling extreme levels of
shock, vibration, and temperature.
The ceramic for GDTs is alumina ranging from 94- 98%
Al2O3. The ceramic-to-metal seals are prepared by molymanganese or tungsten metallizing processes with nickel
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
-10
10
-6
10
-3
10
-1
1
10
100
CLAMP
Amps
<100nSEC.
Figure50pF
1. A generic V-I characteristic of a plasma device.
10,000 nAMPS
50 AMPS
Gas Discharge Tubes
GDT Characteristics, Terms and Consideration Factors (continued)
THEORY
The basic operation of gas tube surge arrestors such as
Littelfuse’s GDTs is best understood by referring to the
schematic form of the voltage-current (V-i) relationship of a
generic gas discharge device such as the one depicted in
Figure 1.
AFor voltages below the breakdown voltage, the gas
provides a good insulator. Very low leakage currents (1012A) occasionally encountered result from ionization by
cosmic rays, high energy photons, etc; and is, therefore,
subject to statistical fluctuations. A1 The current is
higher due to supplementary electron sources such as
photoemission.
BThe discharge is self-sustaining due to gas ionization –if
external agents such as those mentioned for regions
A and A1 are removed, the current will not change
(Townsend discharge). This occurs at the breakdown
voltage of the device.
CThe transition region. As the electric field increases,
more secondary electrons are generated,decreasing the
voltage drop until the glow voltage (region D) is reached.
Stable operation can only be maintained with active
current regulation because of the negative slope of the
V-i characteristic.
DThe glow region (or normal glow region). In this region,
the glow voltage is roughly constant with respect to
small changes in current.
EThe abnormal glow region. In contrast to the normal
glow region, the glow voltage begins to increase as the
current is increased.
FThe glow-to-arc transition region.
GThe arc region. In this region, the arc voltage will quickly
drop and the arc current will quickly increase within the
limitations of the drive energy and impedance.
If the current through the gas discharge device is adjusted
over the range of values of 10-18 to 102 amps, the voltage
across the device will also vary. When a gas discharge
device is operated as a transient voltage protector, the
modes of operation of greatest significance are in regions
A, F, and G. The applied voltage is normally less than the
breakdown voltage of the device, VBD, at which time the
current through the device is in the A region. The charged
carriers of electric current in this mode originate from
the cathode by photon emission and within the fill gas by
collisions of gas particles with cosmic rays (or radioactive
decay particles if an isotope is used in the device).
As soon as the applied voltage across the device exceeds
the breakdown voltage, the current through the device
increases rapidly to values of several amps or greater. The
rate of current rise and the level reached is limited by the
source capacity and the series impedance of the circuit. The
voltage across the device at this time is very low with typical
values of 20V or less.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
Legal Disclaimers
Liability
Disclaimer
Littelfuse, Inc. its affiliates, agents, and employees,
and all persons acting on its or their behalf (collectively,
“Littelfuse”), disclaim any and all liability for any errors,
inaccuracies or incompleteness contained here or in any
other disclosure relating to any product. Littelfuse disclaims
any and all liability arising out of the use or application
of any product described herein or of any information
provided herein to the maximum extent permitted by law.
The product specifications do not expand or otherwise
modify Littelfuse terms and conditions of purchase,
including but not limited to the warranty expressed therein,
which apply to these products.
Specifications, descriptions and data contained in this
document are believed to be accurate. However, users
should independently evaluate each product for the
particular application. Littelfuse reserves the right to
change any information contained herein without notice
and may, at its sole discretion, change the design,
manufacture or construction of any product. Visit
www.littelfuse.com for the most up-to-date information.
Littelfuse’s only obligations for any of its products are
specified in its Standard Terms and Conditions and
Littelfuse shall not be liable for any indirect, consequential
or incidental damages from any sale or use of any of its
products.
Right to Make Changes
Littelfuse reserves the right to make any and all changes to
the products described herein without notice.
Not Intended for Use in Life Support or Life Saving
Applications
The products shown herein are not designed for use
in life sustaining or life saving applications unless
otherwise expressly indicated. Customers using or selling
Littelfuse products not expressly indicated for use in such
applications do so entirely at their own risk and agree
to fully indemnify Littelfuse for any damages arising or
resulting from such use or sale. Please contact authorized
Littelfuse personnel to obtain terms and conditions
regarding products designed for such applications.
Intellectual Property
No license, express or implied, by estoppel or otherwise,
to any intellectual property rights is granted by this
document or by any conduct of Littelfuse. Product
names and markings noted herein may be registered
trademarks of their respective owners. Littelfuse makes
no representations or warranties of non-infringement or
misappropriation of any third party intellectual property
rights unless specifically provided for herein.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
AC and CG3 Series
AC and CG3 Series
RoHS
Description
Littelfuse AC series two-electrode line protectors
provide a high degree of surge protection in AC line
applications. The two models, AC120 and AC240
are designed for use with 120VAC and 240VAC lines
respectively. They are able to extinguish AC follow-on
currents of at least 200A.
Littelfuse CG3 two electrode high voltage (1.0 - 7.5
KV) devices are designed for surge protection and
high isolation applications, and for applications
for which bias voltages or signal levels of several
hundred volts are normally present.
Agency Approvals
Features
AGENCY
AGENCY FILE NUMBER
E320116*
*NOTE: CG3 7.5 product UL approval is currently pending
2 Electrode GDT Graphical Symbol
• Rugged ceramic-metal
construction
• Low capacitance (<1.5
pF)
• Available in tape-andreel packaging
• Available with or
without leads
Applications
AC Series:
• Long branch circuits
(AC wall outlet)
• Short branch circuits
(at breaker box,
computer, etc)
Additional Information
•
•
•
•
Power supplies
Test equipment
Submersible pumps
Medical electronics
CG3 Series:
Datasheet
AC Series
Resources
AC Series
Samples
AC Series
Datasheet
CG3 Series
Resources
CG3 Series
Samples
CG3 Series
• CRT terminals
• CATV equipment
• Antennas
• Power supplies
• Medical electronics
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
AC and CG3 Series
Electrical Characteristics
Device Dimension Type
Device Specifications (at 25°C)
MIN
TYP
MAX
MAX
AC1201
A
230
285
340
500
550
AC2401
A
480
600
720
1100
1200
CG3 1.01
A
800 1000 1200
1400
1500
CG3 1.11
A
880
1100 1320
1600
1700
CG3 1.21
A
960 1200 1440
1700
1800
Part
Number
DC Breakdown
in Volts
(@100V/s)
(@100V/µs)
@1Amp Min
(@1 Kv/µsec)
CG3 1.31
A
1040 1300 1560
1800
1900
CG3 1.51
A
1200 1500 1800
1800
2000
CG3 2.01
A
1600 2000 2400
2500
2750
CG3 2.51
A
2000 2500 3000
3200
3500
CG3 2.71
A
2160 2700 3240
3600
4000
CG3 3.01
A
2400 3000 3600
4000
4200
CG3 3.31
A
2640 3300 3960
4600
4700
CG3 4.0
2
B
3200 4000 4800
5800
6000
CG3 4.52
B
3600 4500 5400
6150
6500
CG3 5.02
B
4000 5000 6000
7500
8000
CG3 6.22,7
B
4960 6200 7440
8100
9500
CG3 6.52,7
B
5200 6500 7800
9500
10000
CG3 7.52,6,7
B
6000 7500 9000
10000
10600
(10x1sec
@50-60Hz)
9 cycles)
(@8/20µs)
MIN
MAX
TYP
10 GΩ
(at 100V)
<1.5 pf
~ 25 V
200
Amps
5A
65 A
10 shots
5kA
1 shot
10kA
10 GΩ
(at 100V)
<1.5 pf
~ 25 V
200
Amps
N/A
N/A
10 shots
5kA
1 shot
10kA
NOTES:
1. Refer to Production Dimensions section, outline A devices
2. Refer to Production Dimensions section, outline B devices
3. Tested to UL1449 -- 120V r.ms. for AC120, 230V r.m.s. all others.
Conducted with suitable MOV connected in series.
4. 10 x [5(+) and 5(-)] applications 5kA @ 8/20µs
5. 1 x [1(+) and 1(-)] application 10kA @ 8/20µs
6. CG3 7.5 product UL approval is currently pending
7. When ordering this item, use suffix code D004 when entering the part number.
The older product version without D004 suffix code has been discontinued.
Refer to Part Numbering System section for additional information.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Life Ratings
Impulse Impulse Insulation CapaciArc
Max
Nominal
AC
Nominal
Max
BreakBreak- Resistance tance Voltage Follow
AC
Discharge Impulse
Surge
(on state
down down In
On
Discharge Current Discharge Current5
(@1MHz)
Voltage)
(1 x 50Hz
in Volts
Volts
Current3 Current
Current4 (@8/20µs)
Product Characteristics
Materials
Core Outline A & B items:
Device: Tin Plated 17.5±12.5 Microns
Axial Outline A & B items:
Device & Wire: Tin Plated 17.5±12.5 Microns
Product Marking
LF Logo, Voltage and date code;
Black ink positive print
Glow to arc
transition current
< 0.5Amps
Glow Voltage
~ 140 Volts
Storage and
Operational
Temperature
-40 to +90
Gas Discharge Tubes
AC and CG3 Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
Lead-Free Recommendation
Preheat:
240
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
40
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
AC and CG3 Series
Device Dimensions
Axial
Part Numbering System and Ordering Information
PROFILE VIEW
0.80DIA. TYP.
[0.031]
A
CG3 X.X XXX D004
AC XXX XXX
TOP VIEW
8.0 ± 0.2
[0.314 ± 0.008] Series
Series
AC Line Voltage
Breakdown Voltage
CG3
120 = 120V
240 = 240V
Lead / Packaging Option
= Core (no leads) / Bulk pack, 400 pcs per bag
L = Leaded / Bulk pack, 50 pcs per tray
LTR = Leaded / Tape & Reel, 500 pcs per reel
6.0 ± 0.2
[0.236 ± 0.008]
62 ± 2
[2.441 ± 0.079]
7.9 ± 0.3
[0.311 ± 0.012]
8.0 ± 0.2
[0.314 ± 0.008] B
Lead / Packaging Option
= Core (no leads) / Bulk pack, 400 pcs per bag
L = Leaded / Bulk pack, 50 pcs per tray
LTR = Leaded / Tape & Reel, 500 pcs per reel
0.80DIA. TYP.
[0.031]
<1.2 Max. Lead Bend
SEMI–PROFILE VIEW
Core
PROFILE VIEW
1.0 = 1000V
1.1 = 1100V
1.2 = 1200V
1.3 = 1300V
1.5 = 1500V
2.0 = 2000V
2.5 = 2500V
2.7 = 2700V
3.0 = 3000V
3.3 = 3300V
4.0 = 4000V
4.5 = 4500V
5.0 = 5000V
6.2 = 6200V
6.5 = 6500V
7.5 = 7500V
Special Suffix Code
Enter this D004 special suffix code when placing orders
for CG36.2, CG36.5 and CG37.5 only
TOP VIEW
A
8.0 ± 0.2
[0.314 ± 0.008] <0.8 Max
52.4
[2.063]
6.0 ± 0.2
[0.236 ± 0.008]
22.8
[0.898]
B
8.0 ± 0.2
[0.314 ± 0.008] 6.4
[0.252]
7.9 ± 0.3
5.0 Pitch
[0.197]
[0.311 ± 0.012]
Packaging Dimensions
For 'LTR' Option Code Axial Lead Items
<1.2 Max. Lead Bend
254.0 - 356.0
[10.0 - 14.0]
<0.8 Max
52.4
[2.063]
80.0
[3.15]
22.8
[0.898]
6.4
[0.252]
5.0 Pitch
[0.197]
254.0 - 356.0
[10.0 - 14.0]
© 2015 Littelfuse, Inc. 80.0
[3.15] to change without notice.
Specifications are subject
Revised: 11/06/15
Direction of Feed
Direction of Feed
Gas Discharge Tubes
CG5 and SL0902A Series
CG5 and SL0902A Series
RoHS
Description
Littelfuse Broadband Optimized™ SL0902A Series offers
high surge ratings in a miniature package. Special design
features provide high levels of protection against fast
rising transients in the 100V/μs to 1kV/μs range usually
caused by lightning disturbances. Low insertion loss is
perfectly suited to broadband equipment applications.
The capacitance does not vary with voltage, and will
not cause operational problems with ADSL2+, where
capacitance variation across Tip and Ring is undesirable.
These devices are extremely robust and are able to
divert a 2500A pulse without destruction. For AC
Power Cross of long duration, overcurrent protection is
recommended.
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662 (exception: CG550)
2 Electrode GDT Graphical Symbol
Littelfuse CG5 MS mini surge arresters are specifically
designed for protection of electrical and communication
equipment against over voltage transients in surface
mount assembly applications. This series offers the most
cutting edge protection using non-radioactive elements.
Features
Additional Information
Datasheet
CG5 Series
Resources
CG5 Series
Samples
CG5 Series
Datasheet
SL0902A
Resources
SL0902A
Samples
SL0902A
•RoHS compliant and
Lead-free
•GHz working frequency
•Excellent stability on
multiple pulse duty cycle
•Excellent response to
fast rising transients.
•Ultra Low Insertion Loss
•5KA surge capability
tested with 8/20μS
pulse as defined by IEC
61000-4-5
•Ultra small devices
offered in a variety of
mounting lead forms
•Non-Radioactive
•Low capacitance (<1pF)
•Voltage Ranges 90V to
600V
•UL recognized
•Conforms to ITU-T K12,
IEC 1000-4-5
Applications
•Communication
equipment
•CATV equipment
•Test equipment
•Data lines
•Power supplies
•Telecom SLIC
protection
•Broadband equipment
•ADSL equipment,
including ADSL2+
•XDSL equipment
•Satellite and CATV
equipment
•General telecom
equipment
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
CG5 and SL0902A Series
Electrical Characteristics
Device Specifications (at 25°C)
DC Breakdown
in Volts
(@100V/s)
(@100V/µs)
Part Number
SL0902A090
CG590
MIN
TYP
Life Ratings
Impulse
Impulse Insulation CapaciBreakdown Breakdown Resistance tance
in Volts
In Volts
(@1MHz)
MAX
(@1 Kv/µsec)
MAX
MIN
108
550
700
10 Ω
(at 50V)
650
72
90
CG5145
116
145
174
550
CG5150
120
150
180
550
SL0902A230
CG5230
184
230
276
550
CG5250
200
250
300
600
CG5270
216
270
324
650
SL0902A350
CG5350
280
350
420
800
CG5400
320
400
480
900
SL0902A420
336
420
504
900
1000
CG5470
376
470
564
1000
1200
SL0902A600
CG5600
480
600
720
1350
1500
Surge
Life
(10/1000µs)
Nominal Nominal
AC
Max
Impulse
AC
Dischage Impulse
Discharge Discharge Current Discharge
Current
Current (9 cycle @50Hz) Current
(8/20µs)
(10x1sec
@50-60Hz)
10 shots
(@5kA)
5A
(1 Application
@ 10/350µs)
MAX
10
650
900
1010 Ω
(at 100V)
1.5 pf
300 shots
(@100A)
10 A
Product Characteristics
CG5xxxLS (Outline 500), CG5xxxxLTR
& CG5350L-03TR (Outline 502), and
CG5xxxL-02 (Outline 503): Device
Nickel Plated 2–5 Microns Wire Tin Plated
17.5±12.5 Microns Construction Ceramic
Insulator.
CG5xxx (Outline 501), and CG5xxxMS
& SL0902AxxxSM (Outline 505):
Device Tin Plated 17.5±12.5 Microns
Construction Ceramic Insulator.
Materials
Product Marking
LF Logo, Voltage and date code
Glow to arc
transition current
< 0.5Amps
Glow Voltage
140 Volts
Storage and
Operational
Temperature
-40 to +90
Typical Insertion Loss
Voltage vs. Time Characteristic
@ 1.0 GHz = 0.01 dB
Max dynamic breakover
voltage
@ 1.4GHz = 0.1 dB
@ 1.8 GHz = 0.53 dB
Voltage
(V)
@ 2.1 GHz = 0.81 dB
@ 2.45 GHz= 1 dB
@ 2.8 GHz = 1.2 dB
Hold-over voltage
@ 3.1 GHz = 1.5 dB
@ 3.5 GHz = 2.1 dB
On-State voltage
0
200
400
600
Time (ns)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
800
1000
1200
0.5kA
Gas Discharge Tubes
CG5 and SL0902A Series
Device Dimensions
Outline 500 - CG5xxxLS
Outline 503 - CG5xxxL-02 (except CG5600L-02, see Outline 502)
PROFILE VIEW
TOP VIEW
5.00 ± 0.20
[0.197 ± 0.008]
5.00 ± 0.20
[0.197 ± 0.008]
TOP VIEW
PROFILE VIEW
5.0 ± 0.2
5.30 ± 0.30
[0.209 ± 0.012]
40° ± 3°
[0.197 ± 0.008]
3.0 ± 0.3
[0.118 ± 0.008]
5.30 ± 0.30
0.40 ± 0.03 [0.209 ± 0.012]
[0.016 ± 0.0012]
0.004
2 Surfaces
5.0 ± 0.2
[0.197 ± 0.008]
0.80
[0.031]
0.80DIA. TYP.
[0.031]
6.3 ± 0.2
[2.480 ± 0.079]
8.00 ± 0.30
[0.315 ± 0.012]
9.30 ± 0.30
[0.366 ± 0.012]
Outline 505 - CG5xxxMS and SL0902AxxxSM
SOLDER PAD LAYOUT
PROFILE VIEW
TOP VIEW
8.00
[0.315]
6.6 ± 0.2
[0.260 ± 0.008]
5.50
[0.216]
5.4 ± 0.15
[0.212 ± 0.006]
1.80
[0.071]
0.5 ± 0.1
9.80
[0.386]
[0.02 ± 0.004 ]
5.0 ± 0.2
[0.197 ± 0.008]
Outline 501 - CG5xxx
3.8
[0.15]
5.4 ± 0.15
[0.212 ± 0.006]
SOLDER PAD LAYOUT
4.50
[0.18]
TOP VIEW
PROFILE VIEW
5.10
5.0 ± 0.15
[0.2]
[0.197 ± 0.006]
0.70
[0.028]
5.0 ± 0.2
[0.197 ± 0.008]
Outline 502 - CG5xxxLTR (also CG5350L-03TR, CG5600L-02)
PROFILE VIEW
0.80 DIA. TYP.
[0.024]
TOP VIEW
5.0 ± 0.2
[0.197 ± 0.008]
5.0 ± 0.2
[0.197 ± 0.008]
62 ± 2
[2.441 ± 0.079]
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
CG5 and SL0902A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
Lead-Free Recommendation
Preheat:
240
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
40
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
Note: These devices are not recommended for IR
or Convection Reflow process.
Gas Discharge Tubes
CG5 and SL0902A Series
Part Numbering System and Ordering Information
CG5 xxx L TR
SL0902A xxx SM
Series
Series
SL0902A
CG5
Breakdown Voltage
90 = 90V
230 = 230V
350 = 350V
600 = 600V
Lead Option Code
(Blank) = Core Device (No Leads)
L = Straight Leads
LS = Shaped Leads
MS = Surface Mount
Breakdown Voltage
090 = 90V
230 = 230V
350 = 350V
420 = 420V
Lead Option Code
SM = Surface Mount
(Packaging Option Code is not applicable for SL0902A)
Packaging Option Code
(Blank) = Bulk (Applies to Core Devices Only)
TR = Tape & Reel
Packaging
Part Number and Device Type
Device Dimensions
Reference
Quantity and Packaging
Description
CG5xxx
Core
Outline 501
1000pcs/bag in bulk packaging
CG5xxxLS
Shaped Leads
Outline 500
900pcs/reel in carrier and tape*
CG5xxxLTR
CG5xxxL-03TR**
Straight Axial Leads
Outline 502
1000pcs/reel in tape and reel*
CG5xxxL-02**
Bent Radial Leads
Outline 503
50pcs/tray in tray and cover
CG5xxxMS
SL0902AxxxSM
Surface mount
Outline 505
900pcs/reel in carrier and tape*
* For tape specifications and dimensions, please contact factory.
** Special order items not available for general sale. Please contact Littelfuse for details.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1002A Series
RoHS
SL1002A Series
Description
The Broadband Optimized™ SL1002A series has
been especially developed for use in broadband
equipment. Special design features provide high
levels of protection against fast rising transients
in the 100V/μs to 1kV/μs range usually caused by
lightning disturbances. These devices have ultra low
capacitance (typically 1.2pF or less) and present
insignificant signal losses up to 1.5GHz. These
devices are extremely robust and are able to divert
a 5000A pulse without destruction. For AC Power
Cross of long duration, overcurrent protection is
recommended.
Agency Approvals
Features
AGENCY
AGENCY FILE NUMBER
E128662
2 Electrode GDT Graphical Symbol
Additional Information
Datasheet
Resources
Samples
• RoHS compliant/Leadfree
• Ultra low insertion loss
• Surface mountable
• 5kA surge capability
tested with 8/20μS–
Pulse as defined by IEC
61000-4-5
• Excellent response to
fast rising transients
• Can be used to meet
Telcordia GR1089
without series
resistance
• 10/700 6kV capability,
as per ITU-T Rec. K.21,
enhanced test level
• 2000 A 2/10μs surge
rating
• Meet FCC part 68
10/160μs waveform,
200A test and 10/560μs
waveform 100A test
• Halogen-free
Applications
•Broadband equipment
•ADSL equipment
•XDSL equipment
•Satellite and CATV
equipment
•General telecom
equipment
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1002A Series
Electrical Characteristics
Device Specifications (at 25°C)
Part Number
Life Ratings
Impulse
Impulse Insulation CapaciDC Breakdown
Breakdown Breakdown Resistance tance
in Volts1,2
in Volts3,4
in Volts3,4
(@100V/s)
(@1MHz
(@100V/µs)
MIN
TYP
MAX
SL1002A075
60
75
90
SL1002A090
72
90
108
(@1kV/µs)
0V Bias)
MAX
MIN
400
650
109 Ω
(at 50V)
600
700
800
900
SL1002A230
184 230 276
SL1002A250
200 250 300
SL1002A260
210 260 310
SL1002A350
280 350 420
SL1002A470
376 470 564
900
1000
SL1002A600
480 600 720
1100
1200
SL1002A600SP 570 600 780
1200
1300
MAX
109 Ω
1.2 pF
(at 100V)
Arc
Voltage
(on state
voltage)
@1Amp Min
Surge
Life
Nominal
Impulse
Discharge
(@100A
Current
10/1000µs)
(8/20µs)
Nominal
AC
Discharge
Current
DC
Holdover
Voltage5
TYP
TYP
~15 V
300
shots6
10 shots7
(@ 5kA)
5A
135 V
Product Characteristics
Product Marking
Littelfuse 'LF' Mark, voltage and date
code
Voltage vs. Time Characteristics
Voltage
(V)
Max dynamic
breakover voltage
Hold-over voltage
On-State voltage
0
200
400
600
Time (ns)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
800
1000
1200
@ 2/10 µs
@ 10/350 µs
2 kA
1.5 kA
50 V
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode
3. In ionized mode, tested according to ITU-T Rec. K.12
4. Comparable to the silicon measurement Switching Voltage (Vs)
5. Reference REA PE-80, 0.2A. Tested to ITU-T Rec. K.12 and REA PE-80 < 150 msecs.
6. 300 Applications [150(+) & 150(-)]
7. 10x[5x (+) & 5x (-)] Applications
Construction = Ceramic Insulator
Device Finish = Dull Tin-plated 17.5 +/-12.5
microns
(1 Application)
(10x1s
@50-60Hz)
109 Ω
(at 500V)
Materials
Max Impulse Discharge
Current
Glow to Arc
Transition Current
< 0.5 Amps
Glow Voltage
~60 - 140 Volts
Storage and
Operational
Temperature
-40 to +90°C
Gas Discharge Tubes
SL1002A Series
Insertion Loss Characteristics
Typical Insertion Loss Characteristics (90V)
Typical Insertion Loss Characteristics (600V)
2
2
0
0
-2
-2
-4
-6
S21 [dB]
S21 [dB]
-4
-8
-10
-6
-8
-10
-12
-12
-14
-14
-16
-18
1.E+07
1.E+08
1.E+09
1.E+10
1.E+11
-16
1.E+07
1.E+08
1.E+09
Frequency [Hz]
1.E+10
1.E+11
Frequency [Hz]
Device Dimensions
'C' Type Core Devices
'SM' Type Surface Mount Devices
Dimensions are in millimeters [and inches]
TOP VIEW
PROFILE VIEW
Ø6.0 ± 0.15
[0.236 ± 0.0059]
Dimensions are in millimeters [and inches]
SEMI–PROFILE VIEW
TOP VIEW
4.1 ± 0.2
[0.161 ± 0.0079]
PROFILE VIEW
6.2 ± 0.15
3.9 Ref
[0.154 Ref]
3.6 ± 0.2
[0.142 ± 0.0079]
SEMI–PROFILE VIEW
3.6 ± 0.2
[0.142 ± 0.0079]
Ø6.2 ± 0.15
Ø6.0 ± 0.15
4.1 ± 0.2
[0.161 ± 0.0079]
7.
0.50
5
0.50
±
2
0.
SOLDER PAD LAYOUT
1.30 [0.051]
5.00 [0.197]
3.50 [0.138]
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1002A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb-free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 seconds
Average Ramp-up Rate (Liquidus Temp
(TL) to peak)
3°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to Peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
240
Lead-Free Recommendation
Preheat:
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
40
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
Gas Discharge Tubes
SL1002A Series
Packaging
‘C’ Type Core Items: Package bulk pack in polybag, 1000 pcs/bag
'SM' Type Surface Mount Items: Packaged tape and reel carrier, 1000 pcs/reel (specifications below)
Dimensions are in millimeters [and inches]
Dimensions are in millimeters [and inches]
275.0
[10.83]
6.5 ± 0.1
[0.256 ± 0.004]
0.40
[0.016]
1.50 +0.10
0
[0.059 +0.004 ]
0
100.0
[3.94]
2 ± 0.1
[0.079 ± 0.004]
10x4=40 ± 0.2
[10x0.157=1.575 ± 0.008]
8 ± 0.1
[0.315 ± 0.004]
4 ± 0.1
[0.157 ± 0.004]
1.75 ± 0.1
[0.069 ± 0.004]
6.5 ± 0.1
[0.256 ± 0.004]
7.5 ± 0.1
[0.295 ± 0.004]
16 ± 0.3
[0.630 ± 0.012]
3°
1.50
[0.059]
76.0
[2.99]
R0.30 max.
[0.012]
25.0
[0.98]
17.7
[0.697]
Direction of Feed
Part Numbering System and Ordering Information
SL1002 A XXX XX
Surge Capability
Voltage
Pin Configuration
C = Core (Packed in polybag, 1000pcs/bag)
SM = Surface Mount (Packed in carrier and tape, 1000pcs/reel)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1003A Series
SL1003A Series
RoHS
Description
The SL1003A series has been especially developed
for Broadband equipment. Special design features
provide high levels of protection against fast rising
transients in the 100V/μs to 1kV/μs range usually
caused by lightning disturbances.
These devices have ultra low capacitance 1.5pF and
present insignificant signal losses up to 1.5GHz.
These devices are extremely robust and are able to
divert a 5000A pulse without destruction. For AC
Power Cross of long duration, over-current protection
is recommended.
Agency Approvals
Features
AGENCY
AGENCY FILE NUMBER
E128662
3 Electrode GDT Graphical Symbol
Additional Information
Datasheet
Resources
• RoHS compliant
• Low insertion loss
• Surface mountable
• 5kA surge capability
tested with 8/20/μs
pulse as defined by IEC
61000-4-5
• GHz working frequency
• Excellent response to
fast rising transients
• Can be used to meet
Telcordia GR1089
without series
resistance
• 10/700 6kV capability,
as per ITU-Tk.21,
enhanced test level
• 2000 Amp 2/10μs surge
rating
Applications
Samples
• Broadband equipment
• ADSL equipment
• XDSL equipment
• Satellite and CATV
equipment
• General telecom
equipment
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1003A Series
Electrical Characteristics
Device Specifications (at 25°C)
Part Number
(@100V/µs)
MIN
SL1003A090
Life Ratings
Impulse
Impulse Insulation CapaciDC Breakdown
Breakdown Breakdown Resistance tance
in Volts1,2,3
in Volts2,3
In Volts2,3
(@100V/s)
(@1MHz
72
TYP
90
MAX
MAX
108
SL1003A230 184 230 276
(@1kV/µs)
0V Bias)
MIN
700
MAX
Arc
Voltage
Surge
Life
(on state
(@200A
Voltage)
10/1000µs)
@1Amp Min
Nominal
Impulse
Discharge
Current
(8/20µs)
Nominal
AC
Discharge
Current
(10x1s
@50Hz)
AC
Discharge
Current
DC
Holdover
Voltage4
(9 Cycles @
50Hz)
TYP
(1 Application)
TYP
109Ω
(at 50V)
Max Impulse
Discharge
Current
@ 10/350µs
50 V
600
SL1003A250 200 250 300
750
SL1003A260 210 260 310
SL1003A300 240 300 360
750
850
SL1003A350 280 350 420
800
900
SL1003A400 320 400 480
850
950
SL1003A450 360 450 540
900
1000
SL1003A500 400 500 600
1100
1400
109Ω
(at 100V)
1.5 pF
~10 to
35 V
300
shots
10 shots
(@10kA)
10 A
135 V
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode, tested according to ITU-T Rec. K.12
3. Comparable to the silicon measurement Switching Voltage (Vs)
4. Reference REA PE-80, 0.2A. Tested to ITU-T Rec. K.12 and REA PE-80 < 150 msecs.
Product Characteristics
Materials
Leaded Device:
Tin-plated copper wire
Core and Surface Mount: Dull Tin-plated
Product Marking
Littelfuse 'LF' Mark, voltage and date
code
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
2 kA
30 A
Glow to Arc
Transition Current
~1 Amp
Glow Voltage
~60 to 200 Volts
Storage and
Operational
Temperature
-40 to +90°C
Gas Discharge Tubes
SL1003A Series
Device Dimensions
For SL1003A series:
Dimensions are in millimeters [and inches]
'C' Type Core Devices
'R' Type Radial Lead Devices (SL1003AxxxR-001)
PROFILE VIEW
TOP VIEW
Ø6.0 ± 0.1
[0.236 ± 0.039]
12.2 - 0.2
[0.480 - 0.079]
8.1 ± 0.2
[0.236 ± 0.039]
4.3 + 1.5
[0.169 + 0.059]
PROFILE VIEW
TOP VIEW
8.1 ± 0.2
[0.319 ± 0.0079]
Ø6.0 ± 0.1
[0.236 ± 0.0039]
6.0 ± 0.5
[0.236 ± 0.020]
4.4 ± 0.3
[0.173± 0.012]
4.4 ± 0.3
[0.173± 0.012]
0.8 DIA.
[0.031]
'R' Type Radial Lead Devices (SL1003AxxxR and SL1003AxxxRF)
PROFILE VIEW
TOP VIEW
12.2 - 2
[0.480 - 0.079]
6.0 ± 0.1
[0.236 ± 0.039]
'SM' Type Surface Mount Devices
TOP VIEW
PROFILE VIEW
6.0 ± 0.1
8.1 ± 0.2
[0.319 ± 0.0079]
3.20
[0.126]
2.8
[0.110]
2.8
[0.110]
Ø6.0 ± 0.1
8.1 ± 0.2
[0.236 ± 0.039]
1.5
[0.059]
6.0 ± 0.5
[0.236 ± 0.020]
4.3 + 1.5
[0.169 + 0.059]
8
6.
Ø
0.5
[0.019]
±
0.8 DIA.
[0.031]
1
3.9 ± 0.3
[0.154± 0.012]
0.
3.9 ± 0.3
[0.154± 0.012]
TOP VIEW
2.20
[0.087]
1.2 Max
[0.047]
PROFILE VIEW
TOP VIEW
12.2 - 2
[0.480 - 0.079]
6.0 ± 0.1
[0.236 ± 0.039]
1.20
[0.04]
1.20
[0.047]
8.1 ± 0.2
[0.236 ± 0.039]
7.00
[0.275]
allow space
for product
clearance
6.000
[0.236]
6.7 ± 0.5
[0.263 ± 0.020]
2.10
2.10
[0.083] [0.083]
4.3 + 1.5
[0.169 + 0.059]
6.40
[0.252]
6.0 ± 0.5
[0.236 ± 0.020]
7.60
[0.299]
3.9 ± 0.3
[0.154± 0.012]
3.9 ± 0.3
[0.154± 0.012]
0.8 DIA.
[0.031]
8.80
[0.346]
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1003A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb-free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 seconds
Average Ramp-up Rate (Liquidus Temp
(TL) to peak)
3°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to Peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
240
Lead-Free Recommendation
Preheat:
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
40
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
Gas Discharge Tubes
SL1003A Series
Packaging
'C' Type Core Items: Package bulk pack in polybag, 500 pcs/bag
'R' and ‘RF’ Type Radial Lead Items: Packed in tray, 100 pcs/tray
'SM' Type Surface Mount Items: Packaged tape and reel carrier, 700 pcs/reel (specifications below)
0.4 ± 0.05
[0.016 ± 0.0020]
Dimensions are in millimeters [and inches]
a
5° m
x
7.4 ± 0.1
[0.291 ± 0.0039]
R0.3 typical
[0.012]
275.0
[10.83]
100.0
[3.94]
76.0
[2.99]
24 ± 0.3
[ 0.945 ± 0.012]
11.5 ± 0.1
[0.453 ± 0.0039]
4 [0.157]
14 [0.551]
8.6 ± 0.1
[0.339 ± 0.0039]
20°
m
ax
3 [0.118]
1.75 ± 0.1
[0.069 ± 0.0039]
Dimensions are in millimeters [and inches]
10x4 ± 0.1 = 40 ± 0.2
Ø1.5 +0.1
[10x0.157 ± 0.004 = 1.575 ± 0.008]
[0.059 +0.0039]
Ø1.5 +0.1
Ø4 ± 0.1
Ø2 ± 0.1
[0.059 +0.0039]
[0.157 ± 0.0039] [0.079 ± 0.0039]
25.0
[0.98]
17.7
[0.697]
Direction of Feed
12 ± 0.1
[0.472 ± 0.0039]
3
[0.118]
9
[0.354]
6.1 ± 0.1
[0.240 ± 0.0039]
SMD-tape according to IEC 60286-3
Part Numbering System and Ordering Information
SL1003 A XXX XX
Type 3 Pole Arrestor
Voltage
Pin Configuration
C = Core type (Packed in polybag, 500pcs/bag)
R = Radial Lead without Failsafe (Packed in tray, 100pcs/tray)
RF = Radial Lead with Failsafe (Packed in tray, 100pcs/tray)
SM = Surface Mount (Packed in carrier and tape, 700pcs/reel)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1010A Series
SL1010A Series
RoHS
Description
The SL1010A Series Gas Discharge Tube (GDT) offers
a compact, three-terminal, surface mount component
that’s just 5mm in diameter. It is rated for 10 hits
(±5 repetitions) of a 5kA 8/20µs surge event with a
low off-state capacitance of 1.5pF. Its low arc voltage
parameter of 10V reduces thermal accumulation
during long-term power fault events.
Agency Approvals
Features
AGENCY
AGENCY FILE NUMBER
E128662
3 Electrode GDT Graphical Symbol
• 5mm diameter size
• Low insertion loss
• Fast response time
• Single component
balanced protector
(T-grd & R-grd)
• High current rating
• Stable performance
over lifetime
• Lead-free and RoHS
compliant
• UL Recognized
Applications
Additional Information
Datasheet
Resources
Samples
• Data lines
• Broadband interfaces
such as ADSL2/VDSL2
• xDSL equipment
• Satellite and CATV
equipment
• General telecom
equipment
• Industrial automation
• Home gateway
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1010A Series
Electrical Characteristics
Device Specifications (at 25°C)
Part Number
Impulse
Breakdown in
Volts2,3 (@100V/µs)
DC Breakdown
in Volts1,2,3
(@100V/s)
Impulse
Breakdown In
Volts2,3
Insulation
Resistance
Capacitance
Arc
Voltage
(@1MHz 0V Bias)
(on state Voltage)
@1Amp Min
(@1kV/µs)
SL1010A075
MIN
TYP
MAX
60
75
90
MAX
450
600
550
700
580
750
SL1010A090
72
90
108
SL1010A170
136
170
204
SL1010A230
184
230
276
SL1010A350
280
350
420
850
1000
SL1010A470
376
470
564
800
950
MIN
MAX
>1GΩ
(at 50VDC)
<1.5 pF
~10 V
Nominal Impulse Nominal Impulse
Discharge
Discharge Current
Current
(x1@10/350µs)
(x10@8/20µs)
5kA
1kA
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode, tested according to ITU-T Rec. K.12
3. Comparable to the silicon measurement Switching Voltage (Vs)
4. Total current through center electrode at 10kA, through side electrode respectively at 5kA
Product Characteristics
Materials
Construction: Ceramic Insulator
Device Finish: Dull Tin-plated
17.5 +/- 12.5 microns
Glow to Arc Transition Current
~1 Amp
Glow Voltage
~60 Volts
Product Marking
Littelfuse 'LF' Mark, voltage and date code
Storage and Operational Temperature
-40 to +90°C
Device Dimensions
For SL1010A series:
Dimensions are in millimeters [and inches]
8,2
7,6 0,2
0,2
5
0,4 0,05
0,1
1,6 0,1
1
2,2
1
5
0,2
4,7
5
6
0,
2
tin-plated
For SL1010A series failsafe version:
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
recommended pad outline
Gas Discharge Tubes
SL1010A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb-free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 seconds
Average Ramp-up Rate (Liquidus Temp
(TL) to peak)
3°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
tL
Ramp-down
TS(min)
25
Peak Temperature (TP)
+0/-5
tP
TP
Temperature
Reflow Condition
Preheat
tS
time to peak temperature
(t 25ºC to peak)
Time
°C
Ramp-down Rate
6°C/second max.
Time 25°C to Peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Packaging
'SM' Type Surface Mount Items: Packaged tape and reel carrier, 900 pcs/reel (specifications below)
Dimensions are in millimeters [and inches]
Dimensions are in millimeters [and inches]
275.0
[10.83]
100.0
[3.94]
76.0
[2.99]
25.0
[0.98]
17.7
[0.697]
Direction of Feed
Part Numbering System and Ordering Information
SL1010A XXX XX
SL1010A Series
Voltage
Pin Configuration
F
= with Failsafe (Packed in carrier and tape, 900pcs/reel)
SM = Surface Mount (Packed in carrier and tape, 900pcs/reel)
SMF = Surface Mount with Failsafe (Packed in carrier and tape, 900pcs/reel)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1011A and SL1411A Series
SL1011A and SL1411A Series
RoHS
Description
The SL1011A and SL1411A series provides high levels
of protection against fast rising transients in the
100V/µs to 1kV/µs range usually caused by lightning
disturbances.
The SL1011A and SL1411A series offers low
capacitance (< 1.5pf) which provides low insertion
loss at high frequencies.
SL1011A offers 5kA protection without destruction
whereas the SL1411A offer 10kA surge protection
without destruction (maximum single surge of 12kA
@ 8/20µs).
Agency Approvals
AGENCY
AGENCY FILE NUMBER
Features
•RoHS compliant
•Low insertion loss
•Excellent response to
fast rising transients
•Ultra low capacitance
E128662
2 Electrode GDT Graphical Symbol
•5kA (SL1011A) or
10kA (SL1411A) surge
capability tested with
8/20μs
pulse as defined by
IEC 61000-4-5
Applications
•Broadband equipment
•ADSL equipment
•XDSL equipment
Additional Information
Datasheet
SL1011A
Resources
SL1011A
Samples
SL1011A
SL1011A
Datasheet
SL1411A
Resources
SL1411A
Samples
SL1411A
SL1411A
•Satellite and CATV
equipment
•General telecom
equipment
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1011A and SL1411A Series
Electrical Characteristics
Device Specifications (at 25°C)
Part Number
(@100V/µs)
(@1kV/µs)
MIN
TYP
MAX
MAX
60
75
90
500
700
72
90
108
500
600
SL1011A145 116 145 174
500
650
120 150 180
500
650
184 230 276
550
700
SL1011A075
SL1411A075
SL1011A090
SL1411A090
SL1011A150
SL1411A150
SL1011A230
SL1411A230
SL1011A250
SL1411A250
200 250 300
600
MIN
800
600
800
280 350 420
800
900
376 470 564
1000
1100
SL1011A500 400 500 600
1100
1200
1200
1400
SL1411A350
SL1011A470
SL1411A470
SL1011A600
SL1411A600
Arc
Voltage
(on state
Voltage)
@1Amp Min
MAX
480 600 720
Surge
Life
Nominal
Impulse
Discharge
(@100A
10/1000µs) Current
Nominal
AC
DC
AC
Dischage Holdover
Discharge Current Voltage4
Current (9 Cycles @
(8/20µs)
(10x1s
@50-60Hz)
(1 Application)
50Hz)
TYP
TYP
@ 8/20µs
@ 10/350µs
SL1411A:
12 kA
1 kA
50 V
1.5 pF
10 Ω
(at 100V)
~20 V
300
shots
SL1011A:
10 shots
(@5kA)
SL1411A:
10 shots
(@10kA)
SL1011A:
5A
SL1011A:
20 A
SL1411A:
10 A
SL1411A:
65 A
135 V
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode
3. Comparable to the silicon measurement Switching Voltage (Vs)
4. Tested according to ITU-T Rec. K.12 < 150 msecs.
Product Characteristics
Materials
Leaded Device: Nickel-plated with Tinplated wires
Core and Surface Mount: Dull Tin-plated
Product Marking
Littelfuse 'LF' Mark, voltage and date
code
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Max Impulse
Discharge Current
1010 Ω
(at 50V)
10
SL1011A260 210 260 310
SL1011A350
Life Ratings
Impulse
Impulse Insulation CapaciDC Breakdown
Breakdown Breakdown Resistance tance
in Volts1,2
in Volts3
In Volts
(@100V/s)
(@1MHz)
Glow to Arc
Transition Current
< 0.5 Amps
Glow Voltage
~60 Volts
Storage and
Operational
Temperature
-40 to +90°C
Gas Discharge Tubes
SL1011A and SL1411A Series
Device Dimensions
For SL1011A Series:
'A' Type Axial Lead Devices
PROFILE VIEW
'C' Type Core Devices
TOP VIEW
TOP VIEW
PROFILE VIEW
Ø8.0 ± 0.2
[0.315 ± 0.0079]
Ø0.8
[0.031]
6.05 ± 0.2
[0.238 ± 0.0079]
Ø8.0 ± 0.2
Ø8.0 ± 0.2
[0.315 ± 0.0079]
SEMI–PROFILE VIEW
6.05 ± 0.2
[0.238 ± 0.0079]
62 ± 2
For SL1411A series:
'A' Type Axial Lead Devices
PROFILE VIEW
'SM' Type Surface Mount Devices
TOP VIEW
TOP VIEW
PROFILE VIEW
8.3 ± 0.1
4 [0.157]
Ø1.0
[0.039]
+ 0.10
Ø8.0 – 0.30
0.0039
[0.315 +
– 0.0118 ]
5.55 [0.219]
Ø8.3 ± 0.15
6.05 ± 0.2
[0.238 ± 0.0079]
6.05 ± 0.2
[0.238 ± 0.0079]
9.
Ø
62 ± 2
SEMI–PROFILE VIEW
30
0.5 ± 0.1
±
2
0.
SOLDER PAD LAYOUT
1.30 [0.051]
'C' Type Core Devices
7.00 [0.276]
TOP VIEW
PROFILE VIEW
+ 0.10
Ø8.00 – 0.30
0.0039
[0.315 +
– 0.0118 ]
SEMI–PROFILE VIEW
5.40 [0.213]
+ 0.10
Ø8.00 – 0.30
+ 0.20
6.05 – 0.15
0.0079
[0.238 +
– 0.0059 ]
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1011A and SL1411A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb-free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 seconds
Average Ramp-up Rate (Liquidus Temp
(TL) to peak)
3°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to Peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
240
Lead-Free Recommendation
Preheat:
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
40
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
Gas Discharge Tubes
SL1011A and SL1411A Series
< 0.7 Max.
52.4 +2
–1
+0.079
[2.063 –0.039 ]
22.8
[0.898]
6±1
[0.236 ± 0.039]
10 ± 0.5 Pitch
[0.394 ± 0.020]
Packaging Dimensions
For Axial Lead Items
Dimensions are in millimeters [and inches]
Dimensions are in millimeters [and inches]
< 1.2 Max. Lead Bend
254.0 - 356.0
[10.0 - 14.0]
< 0.7 Max.
Direction of Feed
77.0 Max.
[3.03]
52.4 +2
–1
[2.063 +0.079
–0.039 ]
22.8
[0.898]
6±1
[0.236 ± 0.039]
10 ± 0.5 Pitch
[0.394 ± 0.020]
For 'SM' Type Surface Mount Items (SL1411A series only)
Dimensions are in millimeters [and inches]
254.0 - 356.0
[10.0 - 14.0]
0.4 ± 0.05
[0.016 ± 0.002]
77.0 Max.
8.5 ± 0.1
[0.335 ± 0.004] [3.03]
1.75 ± 0.1
[0.069 ± 0.004]
Dimensions are in millimeters [and inches]
275.0
[10.83]
10x4 ± 0.1 = 40 ± 0.2
[10x0.157 ± 0.004 = 1.575 ± 0.008]
7.5 ± 0.1
[0.295 ± 0.004]
100.0
[3.94]
4 ± 0.1
[0.157 ± 0.004]
1.5 DIA. MAX.
[0.059]
76.0
[2.99]
25.0
[0.98]
Direction of Feed
17.7
[0.697]
16 +0.3 / -0.1
[0.630 +0.012 / -0.004]
Direction of Feed
8.6 ± 0.1
[0.339 ± 0.004]
1.5 DIA. MAX.
[0.059]
12 ± 0.1
[0.472 ± 0.004]
For 'C' Type Core Items: Packed in plastic bag (500 pcs)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
SL1011B XXX X
Gas Discharge Tubes
SL1011A and SL1411A Series
Voltage
Pin Configuration
A = Axial Lead
C = Core
Remarks: Formed leads are available on request
Part Numbering System and Ordering Information
For SL1011A series:
For SL1411A series:
SL1011A XXX X
SL1411 A XXX XX
Voltage
Surge Capability
Pin Configuration
Voltage
A = Axial Lead
C = Core
Remarks: Formed leads are available on request
For SL1011B series:
SL1011B XXX X
Voltage
Pin Configuration
A = Axial Lead
C = Core
Remarks: Formed leads are available on request
For SL1411A series:
SL1411 A XXX XX
Surge Capability
Voltage
Pin Configuration
A = Axial Lead
C = Core
SM = Surface Mount
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Pin Configuration
A = Axial Lead
C = Core
SM = Surface Mount
Gas Discharge Tubes
SL1122A Series
SL1122A Series Hybrid
RoHS
Description
The SL1122A series Hybrid features a high
performance Alpha Gas Plasma Tube in conjunction
with a MOV. These devices are matched so that high
speed pulses are initially clamped by the MOV, then
as the current rises, the transient energy is switched
through the gas tube. The Hybrid offers high levels of
performance on fast rising transients in the domain
of 100V/µs to 10 kV/µs, so eliminates the dv/dt
switching delay normally exhibited by standard GDTs.
These devices are extremely robust and are able to
divert a 10,000 Amp pulse without destruction.
Agency Approvals
Features
AGENCY
•RoHs Compliant
•Excellent response to
fast rising transients
•Flat response up to
10kV/μs
AGENCY FILE NUMBER
E128662
2 Electrode GDT Graphical Symbol
•10kA surge capability
tested with 8/20μs
pulse as defined by IEC
61000-4-5
• Thermal failsafe
Applications
a
b
(centre electrode)
•Alarm panels
•General telecom
equipment
•MDF protection
•ADSL equipment
•XDSL equipment
e
Additional Information
Datasheet
Samples
Resources
Electrical Characteristics
Device Specifications (at 25°C)
Part Number
DC Breakdown
in Volts1, 2
(@100V/s)
DC Voltage2
(1kV/μs Ignition Time)
MIN
TYP
MAX
SL1122A090
72
90
108
200 (< 10µs)
SL1122A230
184
230
276
350 (< 10µs)
SL1122A260
210
260
310
400 (< 10µs)
Life Ratings
Surge Life1 Surge Current1 ACNominal
Holdover
Discharge DCVoltage
(@1MHz, 0V bias, (on state voltage) (10/1000μs
(8/20μs x 10)
Current1
(<150msecs.)
Capacitance
Arc Voltage
1V oscillation)
@1Amp Min
MIN
MAX
TYP
> 108 Ω (at 50V)
270 pF
> 108 Ω (at 100V)
100 pF
Insulation
Resistance
~10 to 35
Volts
300x +/-)
(10x1s@50Hz)
TYP
50 V
200 A
10 kA
10 A
135 V
Tested in accordance with ITU-T Rec K.12
Notes:
1. Total current through centre electrode
2. Maximum Peak Break Over Voltage
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1122A Series
Product Characteristics
Materials
Electrode Base: Copper
Electrode Plating: Bright Tin
Body: Ceramic
Product Marking
Littelfuse 'LF' Mark, voltage and date
code. Red.
Glow to Arc
Transition Current
~1 Amp
Glow Voltage
~60 to 200 Volts
Storage and
Operational
Temperature
-40 to +90°C
Transverse
Voltage
(Delay Time)
< 0.2 µSec.
(Tested to ITU-T Rec.K.12)
Packaging Dimensions
Device Dimensions
Radial Lead Devices
For Radial Lead Items: Packed in tray (100 pcs)
Dimensions
are in millimeters [and inches]
TOP VIEW
PROFILE VIEW
14.3 ± 0.3
[0.562 ± 0.012]
8.3 ± 0.3
[0.327 ± 0.012]
Part Numbering System and Ordering Information
SL1122A XXX X
Voltage
10.5 Max
[0.413]
1.5 Min
[0.059]
15.0 ± 1.0
[0.591 ± 0.039]
4.40 ± 0.3
4.40 ± 0.3
[0.173 ± 0.012] [0.173 ± 0.012]
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
1.0
[0.039]
Pin Configuration
Gas Discharge Tubes
SL1122A Series
Soldering Parameters - Reflow Soldering
Pb-free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 seconds
Average Ramp-up Rate (Liquidus Temp
(TL) to peak)
3°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to Peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
* Devices that are soldered require inspection before use.
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
240
Lead-Free Recommendation
Preheat:
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
40
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1021A/B Series
SL1021A/B Series
RoHS
Description
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662
3 Electrode GDT Graphical Symbol
a
b
a = TIP
b = RING
e = GROUND
(center electrode)
e
Features
•RoHS compliant
•Low insertion loss
•Excellent response to
fast rising transients
•Ultra low capacitance
Product Characteristics
•10KA (A suffix devices) /
20KA (B suffix devices)
surge capability tested
with 8/20μs pulse as
defined by IEC 61000-4-5
•Available with thermal
failsafe option (add ‘F’
suffix to part number)
Applications
SL1021:
•Broadband equipment
•ADSL equipment
•XDSL equipment
•Satellite and CATV
equipment
•Splitters
•General telecom
equipment
GDT circuit protection devices dissipate electrical
surge energy safely within a contained plasma gas.
Commonly used to help protect sensitive telecom
and networking equipment and lines, GDTs protect
from damage that may result from lightning strikes
and equipment switching operations.
The Littelfuse GDT series described in this document
are available in a variety of leaded and surface mount
forms and offered with and without optional fail-safe
clip. Please refer to the electrical specifications,
dimension and packaging options section of this
document for additional information.
SL1021A/B Series:
SL1021A/B series GDTs are designed to offer high
levels of performance on fast rising transients in the
range of 100V/μS to 1KV/μS, which are those most
likely created by induced lightning disturbances.
These devices feature ultra low capacitance (typically
1.5pF or less) and are extremely robust with SL1021A
devices able to divert a 10,000 Amp pulse without
destruction, and SL1021B suffix devices able to divert
a 20,000 Amp pulse without destruction.
These series offer optimized internal geometry which
provide low insertion loss at high frequencies, ideal
for the protection of broadband and other high speed
transmission equipment.
•Telecom network
interfaces
• Telephone line cards
• Repeaters
• Modems
• Line test equipment
Materials
Dull Tin Plate 17.5 ± 12.5 Microns.
with ceramic insulator
Product Marking
‘LF’ mark, voltage& date code:
SL1021A - Red/White text
SL1021B - Blue/White text
Glow to arc
transition current
~ 1Amp
Glow Voltage
~60-200 Volts
Storage and Operation
Temperature
-40 to +90°C
Transverse Voltage
(Delay Time)
< 0.2µSec (Tested to ITU-T Rec. K.12)
Arc Voltage
~10 to 35 Volts
Holdover Voltage
<150mS (Tested to ITU-T Rec. K.12)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1021A/B Series
Electrical Characteristics
Device Specifications (at 25°C)
Part
Number
DC Voltage
100V/Sec.
DC
Voltage
100 V/
μSec.
MIN
TYP
MAX
SL1021B075
60
75
90
SL1021A090
SL1021B090
72
90
108
SL1021A145
SL1021B145
116
145
174
SL1021A150
SL1021B150
120
150
180
SL1021A200
150
200
250
SL1021A230
SL1021B230
184
230
276
450
SL1021A250
SL1021B250
200
250
300
500
SL1021A260
SL1021B260
210
260
310
550
DC
Voltage
1kV/
μSec.
Life Ratings
Capacitance
(@1Mhz)
650
Insulation
Resistance
MIN
AC
Current
50Hz
1Sec.x101
Surge
Current
8/20μSec
x101
Max
Single
Surge
8/20μSec1
>1010 Ω
(at 50V)
Max Single
Surge
10/350μSec1
Surge Life
10/1000
μSecx3001
4kA2
5kA3
500
600
650
700
SL1021A300
SL1021B300
240
300
360
650
850
SL1021A350
SL1021B350
280
350
420
700
900
SL1021A400
SL1021B400
320
400
480
SL1021A420
SL1021B420
850
950
345
420
500
SL1021A450
SL1021B450
360
450
540
900
1000
SL1021A500
SL1021B500
400
500
600
950
1100
SL1021A600
480
600
720
1000
1200
<1.5pF
NOTES:
1. Total current through centre electrode, tested in accordance with ITU-T Rec K.12
2.SL1021A series
3.SL1021B series
Additional Information
Datasheet
SL1021A
Resources
SL1021A
Samples
SL1021A
Datasheet
SL1021B
Resources
SL1021B
Samples
SL1021B
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
10Amps
>10 Ω
(at 100V)
10
10kA2
20kA3
15kA2
25kA3
200Amps
2.5kA
5kA3
2
Gas Discharge Tubes
SL1021A/B Series
Voltage vs. Time Characteristic
Time vs. Current for Failsafe
60
Max dynamic breakover
voltage
SL102xA with Failsafe
SL102xB or PMT8 500 Volt Higher Melting Point Solder
SL102xB or PMT8 350 Volt Higher Melting Point Solder
SL102xB or PMT8 90 Volt Higher Melting Point Solder
30
20
Voltage
(V)
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Hold-over voltage
On-State voltage
0.5 1
2
5
10
15
0
30
200
400
600
800
1000
1200
Time (ns)
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
+0/-5
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
°C
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
Lead-Free Recommendation
Preheat:
240
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
Note: Surge Arrestors with a Failsafe mechanism should be
individually examined after soldering
40
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Type 04 / R
11.8
[0.464]
9.0
[0.354]
10.10
[0.398]
8.1.
[0.319]
Gas Discharge Tubes
0.3mm
Minimum
Gap
SL1021A/B Series
Type 01 / C
[0.354]
10.10
[0.398]
8.1
[0.319]
0.3mm
Minimum
Gap
9.9
[0.354]
9.9
[0.354]
15
[0.590]
16.8
[0.661]
4.4
[0.173]
1.0 DIA.
[0.039]
4.4± 0.3
[0.173± 0.12]
NOTE: Failsafe option dimensions shown in green.
12.4 ± 1
[0.488 ± 0.039]
Mounting Area
9.0
[0.354]
Shaped
Leaded Devices:
11.8
Type 05Radial
/P
[0.464]
12.4
±1
10.10
[0.488
±12.4
0.039]
±1
[0.398]
[0.488 ± 0.039]
11.8
12.4
±1
[0.464]
11.8
[0.488
± 0.039]
[0.464]
10.10
11.8
[0.398]
10.10
[0.464]
[0.398]
10.10
[0.398]
Type 04 / R
Type0.3mm
04 / R
Minimum
Gap
Type 04
/R
0.3mm
Minimum
0.3mm
Gap
Minimum
15
Gap
0.3mm
[0.590]
Minimum
Gap
4.4 15
[0.590] 15
[0.173]
[0.590]
15
[0.590]
4.4 5.5± 0.3
[0.216±
[0.173]
4.40.12]
[0.173]
4.4
[0.173]
4.4± 0.3
[0.173± 0.12]
4.4± 0.3
[0.173± 0.12]
4.4± 0.3
[0.173± 0.12]
Type 05 / P
0.3mm
Minimum
0.3mm
Gap
Minimum
Gap
0.3mm
0.3mm
Minimum Minimum
Gap
Gap
9.9
[0.354]
9.9
[0.354]
9.9
[0.354]
16.8 9.9
[0.661] [0.354]
8.1.
[0.319] Area
Mounting
Mounting
Area
9.0
[0.354]9.0
[0.354]Area
Mounting
8.1.
9.0
[0.319]
8.1.
[0.354]
[0.319]
8.1.
[0.319]
1.0 DIA.
[0.039]
1.0 DIA.
[0.039]
1.0 DIA.
[0.039]
1.0 DIA.
[0.039]
8.3 +0.3/-0.0
[0.327
+0.019/-0.00]
8.0 +0.3/-0.1
[0.315
+0.019/-0.004]
Core Devices:
Mounting Area
SIDE VIEW
TOP VIEW
11.8
Mounting
Area
9.0
[0.464]
11.8
[0.354]9.0
[0.464]
[0.354]Area
2.2 ± 0.0
10.10
Mounting
8.1
11.8
[0.087 ± 0.000]
[0.398]
10.10
9.0
[0.319]
8.1
[0.464]
[0.398]
1.2 ± 0.0
[0.354]
1.2 ± 0.0
0.3mm [0.047 ± 0.000]
[0.047 ± 0.000] [0.319]
10.10
Minimum
8.1
0.3mm
[0.398]
Gap
[0.319]
Minimum
Gap
0.3mm
Minimum
9.9
6.0
±
0.0
8.5
±
0.0
Gap
[0.354]
9.9
[0.236 ± 0.000]
[0.335 ± 0.000]
[0.354]
9.9
[0.354]
PROFILE VIEW
Type 01 / C
Type 01 / C
Type 01 / C
Mounting Area
Mounting
Area
9.0
[0.354]9.0
[0.354]Area
Mounting
Mounting
Area
8.1.
9.0
9.0
[0.319]
8.1.
[0.354] [0.354]
[0.319]
8.1.
8.1 DIA. MAX.
[0.319]
[0.319]
9.9
[0.354]
9.9
[0.354]
9.9
[0.354]
16.8 23.8
[0.937]
[0.661]
16.8
[0.661]
16.8
[0.661]
1.0 DIA.
[0.039]
1.0 DIA.
[0.039]
1.0 DIA.
1.0 DIA..
[0.039] [0.039]
5.5± 0.3
[0.216±
5.5±0.12]
0.3
[0.216± 0.12]
5.5± 0.3
[0.216± 0.12]
[1.968 ± 50
0.118
± 3]
[1.968 ± 0.118 ]
11.8
50
±3
[0.464]
11.8
[1.968
±
0.118 ]
[0.464]
10.10
11.8
[0.398]
10.10
[0.464]
[0.398]
10.10
[0.398]
22
[0.866] 22
[0.866]
22
[0.866]
7.7 ± 0.3
[0.303 ±
0.019]
7.7
± 0.3
[0.303 ± 0.019]
7.7 ± 0.3
[0.303 ± 0.019]
8.3 +0.3/-0.0
[0.327
8.3 +0.3/-0.0
+0.019/-0.00]
[0.327
+0.019/-0.00]
8.3 +0.3/-0.0
[0.327
+0.019/-0.00]
14.7
[0.579]
Type 06 / Y
8.0 +0.3/-0.1
[0.315
8.0 +0.3/-0.1
+0.019/-0.004]
[0.315
Mounting Area
+0.019/-0.004]
9.0
8.0 +0.3/-0.1
[0.354]
[0.315
+0.019/-0.004]
8.1 DIA. MAX.
TOP VIEW [0.319]
TOP VIEW
11.8
[0.464]
PROFILE VIEW
PROFILE VIEW
0.3mm
Minimum
Gap
10.10
[0.398]
SIDE VIEW
SIDE VIEW
2.2 ± 0.0
SIDE VIEW
TOP VIEW
[0.087
2.2±±0.000]
0.0
[0.087 ±1.2
0.000]
± 0.0
[0.047
1.2±±0.000]
0.0
2.29.9
± 0.0
[0.047 ± 0.000]
[0.354]
[0.087
± 0.000]
1.2 ± 0.0
[0.047 ± 0.000]
PROFILE VIEW
1.2 ± 0.0
[0.047 ± 0.000]
1.2 ± 0.0
[0.047 ± 0.000]
1.2 ± 0.0
[0.047 ± 0.000]
15
6.0 ± 0.0
[0.590]
[0.236 ± 0.000]
6.0 ± 0.0
[0.236 ± 0.000]
6.0 ± 0.0
[0.236 ± 0.000]
6.35 ± 0.5
[0.25 ± 0.25]
16.8
[0.661]
8.5 ± 0.0
[0.335
8.5±±0.000]
0.0
[0.335 ± 0.000]
DIA.
8.51.0
± 0.0
[0.039]
[0.335
± 0.000]
10.75 ± 0.0
[0.42310.75
± 0.000]
± 0.0
[0.423 ± 0.000]
10.75
0.0
SOLDERING
PAD±LAYOUT
6.35
± 0.5
[0.423 ±PAD
0.000]
SOLDERING
LAYOUT
[0.25 ± 0.25]
Overall Product Space
DO NOT
ENCROACH
Overall
Product Space
DO NOT ENCROACH
Overall Product Space
DO NOT ENCROACH
SOLDERING PAD LAYOUT
Type 06 / Y
Type 06 / Y
Mounting Area
Mounting
Area
9.0
[0.354]9.0
[0.354]Area
Mounting
8.1 DIA. MAX.
9.0
[0.319]
8.1 [0.354]
DIA. MAX.
[0.319]
8.1 DIA. MAX.
[0.319]
23.8
[0.937]
23.8
[0.937]
23.8
[0.937] 1.0 DIA..
[0.039]
1.0 DIA..
[0.039]
1.0 DIA..
[0.039]
Type “R” is available for SL1021B075 device only.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Type 60
Type 60
Overall Product Space
DO NOT ENCROACH
SOLDERING PAD LAYOUT
10.0 ± 0.3
[0.394 10.0
± 0.019]
± 0.3
[0.394 ± 0.019]
Ø7.0 ± 0.1
±±0.3
[0.27510.0
± 0.004]
Ø7.0
0.1
[0.394
[0.275 ±± 0.019]
0.004]
Ø7.0 ± 0.1
[0.275 ± 0.004]
Straight
Radial Leaded Devices:
Type 60
4.4± 0.3
[0.173±
4.4±0.12]
0.3
[0.173± 0.12]
4.4± 0.3
[0.173± 0.12]
Type 14"T"
/ XLeaded Devices:
Straight
Type 14 / X
50 ± 3
0.3mm
Minimum
0.3mm
Gap
Minimum
Gap
0.3mm
Minimum
Gap
Ø7.0 ± 0.1
[0.275 ± 0.004]
10.75 ± 0.0
[0.423 ± 0.000]
16.8
[0.661]
5.5± 0.3 16.8
[0.661]
[0.216± 0.12]
16.8
[0.661]
12.4 ± 1
[0.488 ±12.4
0.039]
±1
[0.488 ± 0.039]
11.8
50 ± 3 [0.464]
12.4
±1
11.8
[1.968 ± 0.118[0.488
] [0.464]
± 0.039]
10.10
11.8
11.8
[0.398]
10.10
[0.464]
[0.464]
[0.398]
10.10
10.10
[0.398]
[0.398]
15
[0.590] 15
[0.590]
15
[0.590]
22 4.4
[0.173] 4.4
[0.866]
[0.173]
4.4
[0.173]
5.5± 0.3
[0.216± 0.12]
5.5± 0.3
[0.216± 0.12]
5.5± 0.3
[0.216± 0.12]
Type 14 / X
7.7 ± 0.3
[0.303 ± 0.019]
4.4± 0.3
[0.173± 0.12]
Device Dimensions
Type 14 / X
Type 05 / P
Type 05 / P
10.0 ± 0.3
[0.394 ± 0.019]
Type 60
Type 06 / Y
0.3mm
Minimum
0.3mm
Gap
Minimum
Gap
0.3mm
Minimum
Gap
15
[0.590] 15
[0.590]
15
[0.590]
6.35 ± 0.5
[0.25 ±6.35
0.25]
± 0.5
[0.25 ± 0.25]
6.35 ± 0.5
[0.25 ± 0.25]
14.7
[0.579]
14.7
[0.579]
11.814.7
[0.464]
11.8
[0.579]
[0.464]
10.10
11.8
[0.398]
10.10
[0.464]
[0.398]
10.10
[0.398]
Mounting Area
Mounting
Area
9.0
[0.354]9.0
[0.354]Area
Mounting
8.1 DIA.
MAX.
9.0 MAX.
[0.319]
8.1 DIA.
[0.354]
[0.319]
8.1 DIA. MAX.
[0.319]
9.9
[0.354]
9.9
[0.354]
9.9
[0.354]
16.8
[0.661]
16.8
[0.661]
16.8
[0.661]
6.35 ± 0.5
[0.256.35
± 0.25]
± 0.5
[0.25 ± 0.25]
6.35 ± 0.5
[0.25 ± 0.25]
1.0 DIA.
[0.039]
1.0 DIA.
[0.039]
1.0 DIA.
[0.039]
Gas Discharge Tubes
58
~2
SL1021A/B Series
~58
Box (Cardboard)
Tray (PET)
for 50 Pcs.
Sponge (PE Form)
Part Numbering System and Ordering Information
SL102x x xxx x x
PMT8 xxx x x
Packaging
For 'SL1021A/B' device type C, R, P, Y packing
Series
Series
PMT8
SL1021
SL1024
Surge Capability
35
A = 10kA
B = 20kA
~2
Tray, Cover (PET)
Configuration Code
(See Device Dimensions section)
C
Y
R
X
P
(See Device Dimensions section)
01
10
04
14
05
60
06
Option Code
Option Code
Blank = No failsafe
F or G = With Failsafe
Box (Cardboard)
~55
Configuration Code
090 = 90V
230 = 230V
250 = 250V
350 = 350V
400 = 400V
Tray, Bottom (PET)
for 100 Pcs.
PE Form
Blank = No Failsafe
F = With Failsafe
For 'SL1021A/B' device type X packing
58
~2
Box (Cardboard)
~58
300 = 300V
350 = 350V
400 = 400V
420 = 420V
450 = 450V
500 = 500V
600 = 600V
Breakdown Voltage
Tray (PET)
for 50 Pcs.
Sponge (PE Form)
~135
35
Device~2Type
Description
Quantity
Type C
100pcs/tray x 5 trays per carton
500
Type R
100pcs/tray x 5 trays per carton
500
Type P
100pcs/tray x 5 trays per carton
500
Type Y
100 Pcs.
100pcs/tray x 5 traysforper
carton
500
~55
Breakdown Voltage
090 = 90V
145 = 145V
150 = 150V
200 = 200V
230 = 230V
250 = 250V
260 = 260V
~135
Type X
Box (Cardboard)
Tray, Cover (PET)
Tray, Bottom (PET)
PE Form
50pcs/tray x 5 trays per carton
250
* Please contact the factory for further packaging information.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
CG/CG2 Series
CG/CG2 Series
RoHS
Description
Littelfuse highly reliable CG/CG2 Series GDTs provide
a high degree of surge protection in a small size ideal
for board level circuit protection.
GDTs function as switches which dissipate a
minimum amount of energy and therefore handle
currents that far surpass other types of transient
voltage protection. Their gas-filled, rugged ceramic
metal construction make them well suited to adverse
environments.
The CG/CG2 series comes in a variety of forms
including surface mount, core, straight and shaped
leads, to serve a variety of mounting methods.
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E1286621
E3201162
NOTES:
1. Certified to UL 497B.
2. Only CG2300, CG2470, CG2600, CG2800 and CG221000. Certified to UL 1449.
The CG Series (75V-110V) is ideal for protection
of test and communication equipment and other
devices in which low voltage limits and extremely
low arc voltages are required.
The CG2 Series (145V-1000V) is ideal for protecting
equipment where higher voltage limits and holdover
voltages are necessary.
2 Electrode GDT Graphical Symbol
Features
•RoHS and Lead-free
compliant
• Rugged Ceramic-Metal
construction
•Low Capacitance
(<1.5pf)
Additional Information
•Meets REA PE-80
•Available in surface
mount, and a variety of
lead options options
Applications
Datasheet
CG/CG2
Resources
CG/CG2
Samples
CG/CG2
•Communication lines
and equipment
•CATV equipment
•Test equipment
•Data lines
•Power supplies
•Instrumentation circuits
•Medical electronics
•ADSL equipment
•Telecom SLIC
protection
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
CG/CG2 Series
Electrical Characteristics
Device Specifications (at 25°C)
DC Breakdown
in Volts
(@100V/s)
Part
Number
MIN
TYP MAX
Impulse
Breakdown
in Volts
Impulse
Breakdown In
Volts
(@100V/µs)
(@1 Kv/µsec)
MAX
60
75
90
400
650
CG90
72
90
108
400
600
CG90 SN
72
90
108
400
600
CG110
88
110
132
450
600
CG2145
116
145
174
500
600
CG2145 SN
120
145
174
500
600
CG22301
195 230
265
600
700
CG2230 SN1 184 230
276
600
700
CG2250
213 250
288
625
725
CG2250 SN
200 250
300
625
725
CG2300
255 300
345
700
800
CG2300 SN
240 300
360
700
800
CG2350
297 350
403
750
900
CG2350 SN
280 350
420
750
900
CG2420
357 420
483
800
1000
CG24701
400 470
540
850
1200
CG2470 SN1 376 470
564
850
1200
CG26001
510 600
690
1000
1400
CG2600 SN1 480 600
720
1000
1400
CG28001
920
1200
1500
850 1000 1150
1500
1600
CG21000
1
Insulation CapaciArc
Resistance tance Voltage
(@1MHz)
MIN
CG75
680 800
Life Ratings
MAX
(on state
Voltage)
@1Amp
Min
Surge
Life
(@500A
10/1000µs)
Nominal Nominal
AC
DC
Max
Impulse
AC
Dischage Holdover Impulse
Discharge Discharge Current Voltage2 Discharge
(9 cycle
Current
Current
Current
(8/20µs)
(10x1sec
@50-60Hz)
@50Hz)
TYP
(1 Application
@ 10/350µs)
TYP
52 V
1010 Ω
(at 50V)
4kA
80 V
1.5 pf
15 V
400
shots
10 shots
(@20kA)3
20 A
100 A
1010 Ω
(at 100V)
2.5kA
135 V
10 shots
(@10kA)
10 A
65 A
NOTES:
1. Certified to UL 1449.
2. Reference REA PE-80, 0.2A. Tested to ITU-T Rec K.12 and REA PE 80 < 150 mSec.
3. 5 x [5 (+) or 5 (-)] applications 20kA 8/20µSec. (75 to 600 volt devices.)
10 x [5 (+) and 5 (-)] applications 10kA 8/20µSec. (800 and 100 volt devices.)
Product Characteristics
Materials
Product Marking
LS, Axial:
Device: Tin Plated 2–5 Microns
Lead Wires: Tin Plated 17.5 ± 12.5 Microns
Construction: Ceramic Insulator
Core:
Device: Tin Plated 17.5 ± 12.5 Microns.
Construction: Ceramic Insulator
MS:
Device: Dull Tin Plated 7–9 Microns
Construction: Ceramic Insulator
LF Logo, Voltage and date code; Black in
positive print
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Glow to arc
transition current
< 0.5Amps
Glow Voltage
60-160 Volts
Storage and
Operational
Temperature
-40 to +90
Maximum Follow
On Current1
230 Volts r.m.s, 200 Amps.
(800V and 1000V devices tested to UL1449 3rd edition)
unt (MS) Dimensions
PROFILE VIEW
Gas Discharge Tubes
CG/CG2 Series
SEMI–PROFILE VIEW
SOLDER PAD LAYOUT
2.29 [0.090]
5.58 [0.232]
ø8.30±0.1
6.05 ± 0.2
[0.268 ± 0.0080]
8.71 [0.343]
Device Dimensions
5.89 [0.232]
0.47 ± 0.1
Leaded 'L' Type Straight Axial Devices
PROFILE VIEW
Leaded 'LS' Type Shaped Lead Devices
TOP VIEW
PROFILE VIEW
TOP VIEW
6.07 ± 0.3
[0.239 ± 0.012]
8.10 Max.
[0.319 DIA Max.]
0.81DIA. TYP.
[0.032]
8.10DIA. MAX.
[0.319] 8.40 ± 0.3
[0.331 ± 0.012]
6.07 ± 0.15
[0.239 ± 0.006]
FILE VIEW
2 Surfaces
TOP VIEW
6.07± 0.30
239 ± 0.012]
8.4 ± 0.3
[0.331 ± 0.012]
0.40 ± 0.03
[0.0157 ± 0.0012]
0.004
62 ± 2
9.85 ± 0.30
[0.388 ± 0.012]
SOLDER PAD LAYOUT
0.80
[0.032]
11.15 ± 0.30
[0.439 ± 0.012]
8.10 Max.
[0.319 DIA Max.]
Core Devices
8.40 ± 0.3
[0.331 ± 0.012]
TOP VIEW
8.10 Max.
[0.032 Max.]
9.85
[0.388]
8.66 [0.341]
PROFILE VIEW
8.60
[0.339]
SEMI–PROFILE VIEW
6.07 ± 0.15
0.004
0.40 ± 0.03
[0.0157 ± 0.0012]
2 Surfaces
SOLDER PAD LAYOUT
9.85 [0.388]
1.80
[0.071]
11.68 [0.460]
11.65
[0.459]
8.10 Max.
9.85 ± 0.30
0.388 ± 0.012]
1.77 [0.070]
[0.239 0.81
± 0.0059]
[0.032]
8.4 ± 0.3
5.89 [0.232]
[0.331 ± 0.012]
11.15 ± 0.30
0.439 ± 0.012]
'MS' Type Devices
0.47 ± 0.1
[0.019 ± 0.0039]
DIMENSIONS
mm
[inches]
TOP VIEW
16
Littelfuse
Trademark
250G
XXXX
Shaped Lead
4.00
PROFILE VIEW
Voltage Rating 8.30 ± 0.1
Current Rating[0.327 ± 0.0039]
Date Code
4 ± 0.2
(Contact Littelfuse
[0.157 ± 0.0079]
for additional
information)
R5.29 [R0.208]
5.58 [0.220]
6.05 ± 0.2
[0.238 ± 0.0079]
ø8.30±0.1
1.75
SEMI–PROFILE VIEW
16
16
250G
XXXX
24.00
250G
XXXX
16
250G
XXXX
16
250G
XXXX
16
250G
XXXX
2 9]
0. 7
± .00
30 0
9. 6 ±
6
.3
[0
11.50
0.47 ± 0.1
[0.019 ± 0.0039]
SOLDER PAD LAYOUT
2.29 [0.090]
16.00
0.512 (13.0) Arbor
Hole Dia.
8.71 [0.343]
12.99
(330.0)
5.89 [0.232]
1.01
(25.7)
Direction of Feed
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
CG/CG2 Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
+0/-5
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
°C
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
Lead-Free Recommendation
Preheat:
240
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
40
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
<0.8 Max
Gas Discharge Tubes
52.4
[2.063]
CG/CG2 Series
22.8
[0.898]
6.4
[0.252]
5.0 Pitch
[0.197]
Packaging Dimensions
For 'L' Type Axial Lead Items
<1.2 Max. Lead Bend
254.0 - 356.0
[10.0 - 14.0]
<0.8 Max
Direction of Feed
80.0
[3.15]
52.4
[2.063]
22.8
[0.898]
6.4
[0.252]
5.0 Pitch
[0.197]
Core and 'MS' Type Items
275.0
[10.83]
10x4 ± 0.1 = 40 ± 0.2
[10 x 0.157 ± 0.004 = 1.575 ± 0.008]
254.0 - 356.0
± 0.1
[10.01.75
- 14.0]
[0.069 ± 0.004]
0.4 ± 0.05
[0.016 ± 0.002]
100.0
[3.94]
4 ± 0.1
[0.157 ± 0.004]
1.5 DIA. MAX.
[0.059]
76.0
[2.99]
25.0
[0.98]
7.5 ± 0.1
[0.295 ± 0.004]
8.5 ± 0.1
[0.335 ± 0.004]
80.0
[3.15]
16 +0.3 / -0.1
[0.630 +0.012 / -0.004]
17.7
[0.697]
Direction of Feed
Direction of Feed
1.5 DIA. MAX.
[0.059]
8.6 ± 0.1
[0.339 ± 0.004]
12 ± 0.1
[0.472 ± 0.004]
For 'LS' Type Shaped Lead Items
10x4 ± 0.1 = 40 ± 0.2
[10x.157 ± 0.004 = 1.575 ± 0.008]
1.75 ± 0.1
[0.069 ± 0.004]
0.5 ± 0.05
[0.020 ± 0.002]
1.9
[0.075]
11.75 ± 0.1
[0.463 ± 0.004]
1.5 DIA. MAX.
[0.059]
25.0
[0.98]
Direction of Feed
24 +0.3 / -0.1
[0.945 +0.019 / -0.004]
0.5 ± 0.01
[0.020 ± 0.004]
9 ± 0.1
[0.354 ± 0.004]
100.0
[3.93]
76.0
[2.99]
25.7
[1.01]
11.5 ± 0.1
[0.453 ± 0.004]
8 ± 0.1
[0.315 ± 0.004]
275.0
[10.82]
4 ± 0.1
[0.157 ± 0.004]
1.5 DIA. MAX.
[0.059]
16 ± 0.1
[0.630 ± 0.004]
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
CG/CG2 Series
Part Numbering System and Ordering Information
CG2 XXX XX * XX
Series
CG -- for 75, 90, or 110V
CG2 -- for 145V to 1000V
Breakdown Voltage
75
90
110
145
230
250
300
350
470
600
800
1000
Examples:
CG75 -- A non-leaded 75V device
CG2230L -- A leaded 230V device
CG2800LTR -- A leaded 800V device, tape-and-reel (per EIA standard RS-296-D)
Notes:
CG/CG2 devices with other breakdown voltages in the 75-1000 V range are available upon request.
Lead Option Code
(Blank) = No Leads / Core
L = Straight Leads
LS = Shaped Leads
MS = Surface Mount
Option Code*
SN = may have different DC Breakover
Voltage Limit. Please refer to Electrical
Characteristics table for additional
information.
Packaging Option Code
(Blank) = No Leads / Core, Bulk Bag - 400 pcs
L(Blank) = Straight Lead, Tray - 50 pcs
LTR = Straight Lead, Tape & Reel per EIA RS-296-E - 500 per reel
LS(Blank) = Shaped Lead (see LS dimensions), Tape & Reel - 500 per reel
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1026 Series
SL1026 Series
RoHS
Description
The SL1026 Series is a heavy-duty transient
suppresser using Gas Plasma technology. In
response to transients that exceed the device's
breakover voltage, the device changes from a very
high impedance state to a low impedance state to
conduct harmful current away from the protected
system. The SL1026 is designed to protect electrical
and electronic equipment such as communications,
control and railway systems. Carefully designed
geometry ensures against short circuiting if a failure
occurs due to conditions and events beyond the
design criteria. Optional electrical mounting clip (part
SL1053 ) is available to aid mounting and connection.
3 Electrode GDT Graphical Symbol
a
a = TIP
b = RING
e = GROUND
(centre electrode)
b
Features
e
Additional Information
Datasheet
Resources
•Will protect against
capacitor discharge
voltage transient
waveforms as specified
in RIA 12.
•Will protect against
double exponential
voltage transient
waveforms as specified
in IEC 571.
•RoHS compliant
•55 kA surge capability
(single shot) tested with
8/20μS pulse as defined
by IEC 61000-4-5
•40 kA surge capability
(repetitive)
•Will protect against
Trapezoidal waveforms
as specified in RIA 12.
Samples
Applications
•Trackside cabinets.
•Cell phone base
stations
•Signaling equipment.
•Communication
equipment
•Control gear.
Electrical Characteristics
DC Voltage
100 V/sec
Part Number*
MIN
MAX
DC
Voltage
1kV/µs
1
AC
Current
9 cycles
@50-60Hz
(Amps)
1
AC
Current
50Hz
1 sec x10
(Amps)
1
Surge
Current
8/20μSec
x 10
(kAmps)
Max
Single
Surge
8/20μSec
(kAmps)
1,2
Max Single
Surge
10/350μSec
(kAmps)
1
1
150(+) and 150(-)
10/1000μSec
(Amps)
SL1026-275
200
350
800
200
10
20
40
8
200
SL1026-400
300
500
900
200
10
20
40
8
200
SL1026-700
560
840
1300
200
10
20
40
8
200
NOTES:
End of life limits
-- DC: 50% of minimum initial DC breakdown voltage limit to 150% of maximum initial
DC breakdown voltage limit.
-- Impulse: less that 150% of initial impulse breakdown voltage limit.
1. Total current through center electrode, tested using SL1053B-NL holder
2. Exceeds capability of SL1053B-NL holder
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SL1026 Series
Product Dimensions
Voltage vs. Time Characteristic
SL1026 GDT Series Profile
Max dynamic breakover
voltage
45.0 Max
22.0 Ref
Voltage
(V)
Ø8.7 Ø9.1
Max Max
Type 1053 Holder Profile
Hold-over voltage
On-State voltage
0
200
400
600
800
1000
1200
Time (ns)
Electrical Specifications
Insulation
Resistance
> 10GΩ at 100 Volts
Capacitance:
<=2.5pf, 1MHz 0 Volts Bias
Holdover Voltage:
<150mS, tested at 130 volts according to
ITU-T Rec. K.12 & REA PE 80
Arc Voltage:
~35 Volts, On State Voltage at 1 Amp
(Depending on Voltage Type)
Glow to Arc
Transition Current:
~1 Amp
Glow Voltage:
> 150 Volts, depending on Voltage
Type
Physical Specifications
Weight:
11g (0.388 oz.)
Materials:
Electrode Base: Nickel Iron Alloy
Electrode Plating: Nickel
Body: Ceramic
Part Marking:
Color coded body
SL1026-275: Black/Black
SL1026-400: Black/Yellow
SL1026-700: Black/Red
Storage and
Operating
Temperature:
-40°C to +90°C
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
All dimensions in mm
Part Numbering System
SL 1026 –
Voltage
Packaging
GDT devices are provided as bulk pack in poly bag -- 20 pieces per bag and 5 bags per carton.
Gas Discharge Tubes
SE Series
SE Series
RoHS
Description
Littelfuse SE series GDT offers high surge ratings
in a miniature package. It’s designed for surface
mounting on PCB with small size 3.2x1.6x1.6mm.
Low insertion loss is perfectly suited to broadband
equipment applications. The capacitance does not vary
with voltage, and will not cause operational problems
with ADSL2+, where capacitance variation across Tip
and Ring is undesirable. These devices are extremely
robust and are able to divert a 500A-600A pulse in a
miniature package 1206 without destruction.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662
2 Electrode GDT Graphical Symbol
•RoHS compliant and
Lead-free
•GHz working frequency
•Excellent stability on
multiple pulse duty cycle
•Excellent response to
fast rising transients.
•Ultra Low Insertion Loss
•0.5-0.6KA surge
capability tested with
8/20μS pulse as defined
by IEC 61000-4-5
Applications
Additional Information
•Communication
Datasheet
Resources
•Ultra small devices
offered in a variety of
mounting lead forms
•Non-Radioactive
•Low capacitance
(<0.5pF)
•Voltage Ranges 140V to
500V
•UL recognized
•Conforms to ITU-T K12,
IEC 1000-4-5
•Square Outline
Samples
equipment
•CATV equipment
•Test equipment
•Data lines
•Power supplies
•Telecom SLIC
protection
•Broadband equipment
•ADSL equipment,
including ADSL2+
•XDSL equipment
•Satellite and CATV
equipment
•General telecom
equipment
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SE Series
Electrical Characteristics
Device Specifications (at 25°C)
DC Breakdown Impulse
Impulse
in Volts
Breakdown Breakdown
in Volts
In Volts
(@100V/s)
200 260
230 276
350 495
470 611
500 600
(@1A)
MAX
800
900
700
600
900
1050
1050
1100
800
1150
1200
1200
(x10 @8/20µs) (x10 @5/320µs)
MIN
MAX
>1GΩ (at
100VDC)
<0.5 pf
<0.3 pf
<0.5 pf
<0.5 pf
<0.3 pf
<0.3 pf
<1.0 A
<1.0 A
<1.0 A
<1.0 A
<1.0 A
<1.0 A
~10 V
0.5 kA
~60 V
150 A
0.5 kA
0.5 kA
Tape and Reel Dimensions (IEC 60286-3, dimension in mm)
Device Tin Plated 17.5±12.5 Microns
Construction Ceramic Insulator.
Storage and
Operational
Temperature
Glow
Glow Nominal Nominal
to Arc Voltage Impulse
Impulse
Transition
Discharge Discharge
Current
Current
Current
(@1 Kv/µsec)
Product Characteristics
Materials
Arc
Voltage
-40 to +90 °C
IEC
60286-3 in mm
Dimensions
Dimensions in mm
3.7 ±0.1
Max dynamic breakover
voltage
2 ±0.1
A
A
R0.5 typical
4 ±0.1
A4 ±0.10
B
3 ±0.1
1.9 ±0.1
5°
2 ±0.1
+0.3
12
+0.3
0
4.9 ±0.1 5°
5°
0.4 ±0.05
0.4 ±0.05
Voltage vs. Time Characteristic
section
B-B
section
B-B
section
section
A-A
A-A
5°
2.1 ±0.1
Tape Specifications
Tape
Specifications
IEC 60286-3
1.75 ±0.1
140
172
265
329
400
(@1MHz)
1.75 ±0.1
SE200
SE230
SE350
SE470
SE500
(@100V/µs)
Capacitance
12 - 0.15.5 ±0.1
5.5 ±0.1
Part
Number MIN TYP MAX
SE140
98 140 182
Insulation
Resistance
Life Ratings
±0.05
Ø 1.55 1.5
Ø 1.6 ±0.1
±0.05
B
3.65 ±0.1
B
8 ±0.1
B
SMD-Tape has to withstand
Force of
SMD-Tape
has to withstand
4 ±0.1 a minimum
Ø 1.1 ±0.1
A
F > 20
N / pocket Force of
a minimum
2 Kg / pocket
F > 20 N / pocket
minimum 2vertical
load
Kg / pocket
(minimum checking
minimum
vertical load
quantity:10
pockets)
Voltage
(V)
(minimum checking
quantity:10 pockets)
Hold-over voltage
Reel Specifications
IEC
60286-3
Reel
Specifications
Dimensions
IEC 60286-3in mm
On-State voltage
Dimensions in mm
0
200
400
600
800
1000
1200
Time (ns)
1.5 min.
12.8 min.
18.4 max.
R0.75
18.4 max.
12.4 +2/-0
12.4 +2/-0
11.9 min.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
11.9 min.
Ø330 max.
R0.75
Ø100 min.
12.8 min.
Ø100Ø330
min. max.
20.2 min.
20.2 min.
1.5 min.
Gas Discharge Tubes
SE Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Device Dimensions
Ramp-down
TS(min)
Preheat
tS
time to peak temperature
(t 25ºC to peak)
Time
Part Numbering System and Ordering Information
SE xxx
Dimensions in mm and inch [...]
Series
[0.063+/- 0.008]
1.6+/- 0.2
1206 Square GDT
Breakdown Voltage
[0.063+/- 0.008]
1.6+/- 0.2
[0.126 +/- 0.012]
3.2+/-0.3
140 = 140V
200 = 200V
230 = 230V
350 = 350V
470 = 470V
500 = 500V
[0.157]
4
[0.094]
2.4
tL
°C
Ramp-down Rate
[0.047]
1.2
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
25
Peak Temperature (TP)
+0/-5
tP
TP
Temperature
Reflow Condition
[0.063]
1.6
Packaging
Part Number
Recommended Pad Layout
Packaging Option
Quantity
SE140
Tape and Reel
3,000
SE200
Tape and Reel
3,000
SE230
Tape and Reel
3,000
SE350
Tape and Reel
3,000
SE470
Tape and Reel
3,000
SE500
Tape and Reel
3,000
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SG Series
SG Series
RoHS
Description
Littelfuse SG series GDT offers high surge ratings
in a miniature package. It’s designed for surface
mounting on PCB with small size 4.5x3.2x2.7mm.
Low insertion loss is perfectly suited to broadband
equipment applications. The capacitance does not vary
with voltage, and will not cause operational problems
with ADSL2+, where capacitance variation across Tip
and Ring is undesirable. These devices are extremely
robust and are able to divert a 1000A pulse without
destruction.
Features
Agency Approvals
AGENCY
•RoHS compliant and
Lead-free
•GHz working frequency
•Excellent stability on
multiple pulse duty cycle
•Excellent response to
fast rising transients.
•Ultra Low Insertion Loss
•1-2KA surge capability
tested with 8/20μS
pulse as defined by IEC
61000-4-5
AGENCY FILE NUMBER
E128662
2 Electrode GDT Graphical Symbol
Additional Information
Applications
•Communication
Datasheet
Resources
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
•Ultra small devices
offered in a variety of
mounting lead forms
•Non-Radioactive
•Low capacitance (<1pF)
•Voltage Ranges 75V to
600V
•UL recognized
•Conforms to ITU-T K12,
IEC 1000-4-5
•Square Outline
Samples
equipment
•CATV equipment
•Test equipment
•Data lines
•Power supplies
•Telecom SLIC
protection
•Broadband equipment
•ADSL equipment,
including ADSL2+
•XDSL equipment
•Satellite and CATV
equipment
•General telecom
equipment
Gas Discharge Tubes
SG Series
Electrical Characteristics
Device Specifications (at 25°C)
Life Ratings
DC Breakdown Impulse
Impulse
Insulation CapaciArc
Glow
Glow Nominal Nominal Nominal
in Volts
Breakdown Breakdown Resistance tance Voltage
to Arc
Voltage
AC
Impulse Impulse
in Volts
In Volts
Transition
Discharge Discharge Discharge
(@100V/s)
(@1MHz)
(@1A)
Current
Current
Current
(@100V/µs)
(@1 Kv/µsec)
Current
Part
Number MIN TYP MAX
SG75
52 75
98
SG90
63 90 117
SG150
105 150 195
MAX
MIN
500
500
500
650
600
600
>1GΩ
(at 50VDC)
>1GΩ
(at 100VDC)
SG200
140 200 260
550
700
SG230
SG300
SG300Q
SG350
SG350Q
SG400
SG420
SG420Q
SG450Q
SG500Q
SG600Q
172
225
210
263
263
300
315
315
370
400
450
650
700
580
750
600
800
800
650
680
950
1100
800
850
650
900
700
950
1000
750
750
1050
1200
230
300
300
350
350
400
420
420
450
500
600
288
375
390
437
437
500
525
525
500
600
750
(x10 @50Hz)
(x10 @8/20µs)
2A
2kA
MAX
~10 V
~1.0 A
(10/1000µs
100 cycles)
~60 V
<1 pf
2.5 A
>1GΩ
(at 50VDC) <0.8 pf
<1 pf
>1GΩ
<0.5 pf
(at 100VDC)
<1 pf
~12 V
~20 V
~0.5 A
~0.8 A
~12 V
~0.5 A
~10 V
~20 V
~20 V
~16 V
~20 V
2A
~90 V
~140 V
~90 V
~140 V
~90 V
~60 V
NA*
2A
NA*
2A
2A
NA*
1A
<1.0 A
~0.1 A
<0.5 A
~140 V
10 A
1kA
2A
* Specification is not applicable for quick response (SGxxxQ) version of product
Materials
Device Tin Plated 17.5±12.5 Microns
Construction Ceramic Insulator.
Storage and
Operational
Temperature
-40 to +90 °C
Voltage vs. Time Characteristic
Max dynamic breakover
voltage
Voltage
(V)
Product Characteristics
Typical Insertion Loss
Hold-over voltage
@ 1.0 GHz = 0.01 dB
On-State voltage
@ 1.4GHz = 0.1 dB
@ 1.8 GHz = 0.53 dB
@ 2.1 GHz = 0.81 dB
0
200
400
600
800
1000
1200
Time (ns)
@ 2.45 GHz= 1 dB
@ 2.8 GHz = 1.2 dB
@ 3.1 GHz = 1.5 dB
@ 3.5 GHz = 2.1 dB
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
Gas Discharge Tubes
SG Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
Preheat
TS(min)
25
tS
time to peak temperature
(t 25ºC to peak)
Time
Device Marking
Device Dimensions
Type Production
Code Year Code
(last digit)
Dimensions in Millimeters.
A3A
3.2 +/- 0.3
Production
Month Code
0.5 +/- 0.1
2.7 +/- 0.3
4.5 +/- 0.3
Type Code
5.2
2.8
4
Recommended Soldering Pad Layout
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
SG75
SG90
SG150
SG230
SG300
SG300Q
SG350
SG350Q
SG400
SG420
SG420Q
SG450Q
SG500Q
SG600Q
SG200
Month Code
A
B
C
D
E
F
G
H
I
J
K
L
January
February
March
April
May
June
July
August
September
October
November
December
Gas Discharge Tubes
SG Series
Tape and Reel Dimensions (IEC 60286-3, dimension in mm)
Part Numbering System and Ordering Information
Tape Specifications
IEC 60286-3
Dimensions in mm
SG xxx Q
section
B-B
5°
Series
Square GDT
2 ±0.1
A
4 ±0.10
Ø 1.55 ±0.05 Ø 1.6
Breakdown Voltage
±0.1
75 = 75V
90 = 90V
150 = 150V
200 = 200V
230 = 230V
300 = 300V
350 = 350V
400 = 400V
420 = 420V
450 = 450V (Not available without “Q” suffix)
500 = 500V (Not available without “Q” suffix)
600 = 600V (Not available without “Q” suffix)
+0.3
4.9 ±0.1 5°
12 0
5.5 ±0.1
1.75 ±0.1
section
A-A
0.4 ±0.05
B
3 ±0.1
R0.5 typical
A
B
3.65 ±0.1
8 ±0.1
SMD-Tape has to withstand
a minimum Force of
F > 20 N / pocket
2 Kg / pocket
minimum vertical load
(minimum checking
quantity:10 pockets)
Device Option Code
(Blank) = Standard device
Q = Quick Response Version
(300V, 350V, 420V, 450V,
500V, 600V only)
Reel Specifications
Packaging
IEC 60286-3
Dimensions in mm
Part Number and Device Type
SGxxx
Surface mount
Quantity and Packaging
Description
2000pcs/reel in tape and reel
R0.75
Ø100 min.
12.8 min.
Ø330 max.
20.2 min.
1.5 min.
18.4 max.
12.4 +2/-0
11.9 min.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/06/15
littelfuse.com
[email protected]
EC141Nv1115