Sonardyne Global Headquarters T. +44 (0) 1252 872288 F. +44 (0) 1252 876100 E. [email protected] www.sonardyne.com Datasheet Sentinel Sonar Head Description The Sentinel Sonar Head comprises a combined transmit and receive array along with the required electronics to transfer raw data to the Sentinel Sonar Processor (8161-002001). The Sonar Head has a wide bandwidth transmission capability, centred by default on 70kHz with a bandwidth in excess of 20kHz. Source level for the default transmission is 206dB re 1µPa @ 1m. 8 separate 45° transmit sectors are used, which are individually addressable, allowing any segment to be disabled to reduced nuisance acoustic returns from close in objects such as harbour walls or jetties. The transmitters themselves are fully programmable and supplied with a number of frequency modulated Doppler tolerant pulses that can be selected via the Sentinel system configuration file. The compact 1:3 piezo-composite transducer array has 128 separately wired elements, which are used to form 256 equally spaced, receive beams – each with a 1.4° horizontal beam width. Software further interpolates these beams to provide highly accurate bearing estimation for the target. The sonar head also contains the electronics to digitise, baseband, multiplex and transfer the signals received by the transducer, along with control and monitoring software that performs periodic built-in-testing to verify the health of the transducer elements and front-end electronics. Efficient electronics and transducer arrays result in a total power budget of less than 70W. Data is transferred to the surface via either 75m copper or 300m or greater fibre-optic cable. An attitude and heading reference sensor is included in the sonar to compensate for orientation and motion of the sensor. This also allows the sonar to be mounted either way up. The Sentinel sonar head is available in both a lightweight aluminium housing, suitable for expeditionary use, and in an aluminium-bronze housing for permanent installations. Key Features • Environmentally friendly low 206dB re 1µPa @ 1m source level • Operating power of <70W • Available in aluminium or aluminium-bronze housings • 1:3 piezo-composite array • Separately addressable 45° transmit sectors • Integrated attitude and heading reference sensor Sonardyne Global Headquarters T. +44 (0) 1252 872288 F. +44 (0) 1252 876100 E. [email protected] www.sonardyne.com Specifications Sentinel Sonar Head Feature Acoustic Operational Frequency Bandwidth Source Level Pulse Length 3dB Vertical Beamwidth 3dB Azimuthal Beamwidth Receive Beams Performance Electrical Detection Range Acoustic Cover Target Bearing Resolution Target Position Voltage Power Communication Environmental Depth Rating Mechanical Material Dimensions (Diameter x Length) Weight in Air Weight in Water Specifications subject to change without notice - 03/2010 Type 8160-000-01 Type 8160-000-02 Expeditionary Model Long Immersion Model 70kHz 20kHz 206dB re 1µPa @ 1m 40ms 11° 3.5° 256 Radius 900m 360° <0.14° <1m at 150m range 55-0-55V A.C. Max 70W Cat6 Ethernet 50m Aluminium Alloy, PVC & PU Aluminium Bronze, PVC & PU 330mm (12”) x 432mm (17”) 330mm (12”) x 432mm (17”) 35kg (77lb) 45.5kg (100lb) 6kg (13.5lb) 18kg (40lb)