ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Stainless Steel Push Button Mount • Low profile • No tapping required • Designed for use only where both sides of the panel are accessible • For use with standard cross section Pan-Steel® Ties • 304 Stainless Steel B2. Cable Accessories A A B3. Stainless Steel Ties A C1. Wiring Duct H W C2. Surface Raceway C3. Abrasion Protection Part Number MBM-H25-Q Used with Pan-Steel® Ties/Strapping MLT/S or MLTFC/S Mounting Method Inserted into pre-drilled hole .25" (6.4mm) Diameter A In. mm .40 10.0 Width W In. mm .20 5.0 Height H In. mm .26 6.5 Panel Std. Std. Thickness Pkg. Ctn. In. mm Qty. Qty. .03 – .12 .8 – 3.0 25 250 C4. Cable Management D1. Terminals Stainless Steel 2-Way Tie Mount D2. Power Connectors D3. Grounding Connectors • Allows stainless steel cable ties to be inserted from either of two sides • Low profile • Single hole center mounting for maximum holding and stability • Maximum screw head height .09 inches (2.3mm) • For use with standard, light-heavy, and heavy cross section Pan-Steel® Ties • 304 Stainless Steel A E1. Labeling Systems Q A E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions G Z E2. Labels Part Number MTM2H-Q Used with Pan-Steel® Ties/Strapping MLTS/LH/H, MLTC/H or MLTFC/S/LH/H Mounting Method* #8 (4mm) screw Length A In. mm .71 18.0 Height H In. mm .30 8.0 Screw Head Height G In. mm .09 2.3 Slot Width Q In. mm .35 9.0 H Hole Diameter Z In. mm .17 4.5 Std. Pkg. Qty. 25 Std. Ctn. Qty. 250 *Stainless steel screws are recommended for fastening to avoid corrosion problems associated with dissimilar metals. F. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.