ELECTRICAL SOLUTIONS A. System Overview One-Hole, Vertical Two-Barrel Lug For Use with Stranded Aluminum or Copper Code Conductors B1. Cable Ties Type LAM2SA • Dual barrel provides termination of two conductors • Made from high strength, extruded aluminum alloy to provide premium electrical and mechanical performance • Tin-plated to inhibit corrosion • Wide wire range-taking capability minimizes inventory requirements • Inspection window to visually assure full conductor insertion • Plated steel or aluminum set screw provides high strength, durable electrical contact between conductor and connector • UL Listed and CSA Certified for use up to 600 V and UL temperature rated 90°C B2. Cable Accessories B3. Stainless Steel Ties L W C1. Wiring Duct P H2 T Part Number LAM2SA300-56-3 Stud Hole Size (In.) 5/16 Conductor Size Range #6 AWG – 300 kcmil Hex Key Size (In.) 5/16 H1 Figure Dimensions (In.) L 3.00 W 1.00 H1 2.00 H2 1.25 T 0.50 P 1.00 Std. Pkg. Qty. 3 The use of Panduit oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See page D2.155. C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Two-Hole, Two-Barrel Lug D1. Terminals For Use with Stranded Aluminum or Copper Code Conductors Type LAM2B • Dual barrel provides termination of two conductors • Made from high strength, extruded aluminum alloy to provide premium electrical and mechanical performance • Tin-plated to inhibit corrosion • Wide wire range-taking capability minimizes inventory requirements • Inspection window to visually assure full conductor insertion • Plated steel or aluminum set screw provides high strength, durable electrical contact between conductor and connector • LAM2LB connector provided with dual set screws for premium clamping of conductor to connector for heavy duty applications • UL Listed for use up to 600 V and temperature rated 90°C • Available with NEMA hole sizes and spacing L D2. Power Connectors D3. Grounding Connectors L HOLE SPACING E1. Labeling Systems W W HOLE SPACING T P T H Figure 1 Part Number ◆ LAM2B350-12-3Y ◆ LAM2LB600-12-3* ◆ LAM2LB1000-12-3* P E2. Labels H Figure 2 Figure Dimensions (In.) Figure No. 1 Conductor Size Range #6 AWG – 350 kcmil Stud Hole Size (In.) 1/2 Stud Hole Spacing (In.) 1.75 Hex Key Size (In.) 5/16 L 4.19 W 1.91 H 1.28 T 0.25 P 3.06 Std. Pkg. Qty. 3 2 #2 AWG – 600 kcmil 1/2 1.75 3/8 5.50 2.85 1.50 0.38 3.25 3 2 500 – 1000 kcmil 1/2 1.75 1/2 6.19 3.48 1.88 0.56 3.44 3 The use of Panduit oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See page D2.155. *UL Listed and CSA Certified. ◆NEMA hole sizes and spacing. E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)