ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Stud Tie Mounts • Easily applied to bolts or studs with a light hammer blow or turning of the mount • Designed for use with cable ties to route and secure cable bundles, air, water and hydraulic lines B2. Cable Accessories 1.10 (27.9) .95 (24.1) 1.99 (50.6) 1.25 (31.8) B3. Stainless Steel Ties 1.00 (25.4) .48 (12.2) TMSTH TMSTLH C1. Wiring Duct Part Number TMSTLHS6-M0 Used with Cable Ties‡ M, I, S, HS, LH C3. Abrasion Protection TMSTLHS8-M0 TMSTHS10-D0 TMSTHS11-D0 TMSTHS12-D0 TMSTHS13-D0 M, I, S, HS, LH M, I, S, HS, LH, H M, I, S, HS, LH, H M, I, S, HS, LH, H M, I, S, HS, LH, H C4. Cable Management TMSTHS16-D0 TMSTHS19-D0 M, I, S, HS, LH, H M, I, S, HS, LH, H C2. Surface Raceway • Material: Impact Modified Weather Resistant Nylon 6.6 Color Mounting Method Environment 1/4" stud dia. (6mm) Black 1/2" stud dia. (13mm) 1000 5000 500 — 500 — 500 — 500 — 5/8" stud dia. (16mm) 3/4" stud dia. (19mm) 500 500 — — Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 100 100 500 500 5/16" stud dia (8mm) 3/8" stud dia. (10mm) 7/16" stud dia. (11mm) 12mm stud dia. Outdoors Std. Std. Pkg. Ctn. Qty. Qty. 1000 5000 ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy and H = Heavy. D1. Terminals Metal Clip-On Mounts D2. Power Connectors • Clips on sheet metal edges for fast mounting of harness with cable ties • Allows cable tie entry from all four sides for easy harness orientation • For indoor use only • Material: Zinc plated steel D3. Grounding Connectors .88 (22.4) .56 (14.2) E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers Part Number MCMS12-P-C MCMS25-P-C MCMS30-P-C Used with Cable Ties‡ M, I, S A Height A In. mm .31 8.0 Max. Panel Thickness In. mm .13 3.2 .46 .55 .24 .27 11.5 14.0 Mounting Method 6.1 6.9 Clip-On ‡Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, and S = Standard. E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.